McLaren Sport Series ECU removal guide
Step 1 – Lift your vehicle up or jack up the right side to remove the right rear wheel.
Step 2 – With the wheel removed, remove the inner fender liner.
Step 3 – Now you can see the ECU bolted in a cage hanging upside down. You will now
remove these brackets to free the ECU.
Note – not cutting but removing the clip!
Step 4 – With the ECU loose, slide out the connectors from each side to remove the large
computer harness.
Step 5 – Now that your ECU is free, package and send it to:
Lalit Malik
DME Tuning
15-01 Pollitt Drive
#8a
Fair Lawn, NJ 07410
+1 (201-774-7710)
Please include the following information in the package or email to [email protected]
-VIN number
-License plate
-List of modifications
-Grade of octane used daily