Download - Mechatronic silva sesma
Marco Antonio Silva Sesma 2amt
Una resistencia o resistor es un elemento que causa oposición al paso de la corriente eléctrica, causando que en sus terminales aparezca una diferencia de tensión (un voltaje).
A resistor or resistor is an element that causes opposition to current electric flow , causing its terminal voltage appears a difference (a voltage).
Resistor
Types of resistance
The most commonly used types of resistance are: -Fixed Resistors: agglomerated carbon film, wirewound and metal film. -Variable resistors: rolls of film.
-Dependent or variable resistors: LDR, VDR, PTC , NTC.
Los tipos de resistencias más utilizadas son:- Resistencias fijas: aglomeradas, de película de carbón, de película metálica ybobinadas.- Resistencias variables: bobinadas, de película.- Resistencias dependientes o variables: LDR, VDR, PTC, NTC.
Resistor
Los resistores (resistencias)son fabricados en una gran variedad de formas y tamaños.En las más grandes, el valor del resistor se imprime directamente en el cuerpo del mismo, pero en los más pequeños no es posible.
The resistors are manufactured in a wide
variety of shapes and sizes.
The larger the resistor value is printed directly
on the body of it, but in smaller not possible.
Para poder obtener con facilidad el valor de la resistencia /resistor se utiliza el código de coloresSobre estos resistores se pintan unas bandas de colores. Cada color representa un número que se utiliza para obtener el valor final del resistor.
To be able to easily obtain the value of resistance
/ resistor is used, the color code.
On these resistors are painted bands of color.
Each color represents a number that is used to
obtain the final value of the resistor.
Las dos primeras bandas indican las dos primeras cifras del valor del resistor, la tercera banda indica cuantos ceros hay que aumentarle al valor anterior para obtener el valor final de la resistor.La cuarta banda nos indica la tolerancia y si hay quinta banda, ésta nos indica su confiabilidad.
The first two bands indicate the first two
digits of the value of the resistor, the third
band indicates how many zeros should be
increased to the previous value to obtain
the final value of the resistor.
The fourth band indicates the tolerance
and if there fifth band, this one indicates
its reliability.
Color Primera bandaPrimer dígito
Segunda bandaSegundo dígito
Tercera bandaTercer dígito
Cuarta bandaTolerancia
Negro 0 0 1
Marrón 1 1 10
Rojo 2 2 100
Naranja 3 3 1000
Amarillo 4 4 10000
Verde 5 5 100000
Azul 6 6 1000000
Violeta 7 7 10000000
Gris 8 8 100000000
Blanco 9 9 1000000000
Dorado 0.1 5%
Plateado 0.01 10%
Ninguno 20%
If a resistor has the following color bands:
The resistor has a value of 2400.000 ohms ± 5% The maximum value of this resistor is: 25200.000 Ω The minimum value of this resistor is: 22800.000 Ω resistor can have any value between the maximum and minimum calculated.