Upload File

Download - Miniature Circuit Breaker Lockout OSHA-E04abastec.cl/fichas/Miniature Circuit Breaker Lockout OSHA... · 2020. 2. 1. · Title: Miniature Circuit Breaker Lockout OSHA-E04 Created

Transcript

  • ABASTECIMIENTOSTÉCNICOS LTDA.

    [email protected]

    CASA MATRIZ

    San Gumercindo N° 522 Quinta Normal, SantiagoTeléfono: (56) 22776 4726Celular: (+56-9) 5669 5972

    SUCURSAL CONCEPCIÓN

    Paicavi N° 1576Teléfono:(41) 2138756 – (41) 2138718Celular: (+56-9) 9138 6436

    Miniature Circuit Breaker LockoutOSHA-E01 / OSHA-E02 / OSHA-E03 / OSHA-E04

    Made from engineering plastic strengthened nylon PA.

    Fit most existing types fo European and Asia Circuit Breaker.

    Easily installed with the aid a push button or rotate roller.

    Available for single and multi-pole circuit breaker.

    Recommended to use in combination with a padlock for added safety.

    Can use padlocks with a shackle dia-

    meter up to 7mm.

    OSHA-E01

    OSHA-E02

    OSHA-E03

    OSHA-E04

    Part Code

    POS (Pin Out Standard), hole spacing ≤12mm

    PIS (Pin In Standard), hole spacing ≤12mm

    TBLO (Tie Bar Lockout)

    POW (Pin Out Wide), hole spacing ≤20mm

    Description

    OSHA-E01 OSHA-E02 OSHA-E03 OSHA-E04


Top Related

Lockout / Tagout - Ohio BWC · 1 - 1 Lockout/Tagout Class Agenda 1. Introduction 2. Pretest 3. Overview of Lockout/Tagout, Safe Work Practices, State codes 4. OSHA regulation 1910.147
Lockout / Tagout - Ohio BWC · 1 - 1 Lockout/Tagout Class Agenda 1. Introduction 2. Pretest 3. Overview of Lockout/Tagout, Safe Work Practices, State codes 4. OSHA regulation 1910.147
Why do I Need Lockout/Tagout? - Panduit0.pdf · Why do I Need Lockout/Tagout? ... OSHA outlines the LOTO safety method in standard 29 CFR 1910.147 “Control of Hazardous Energy”
Why do I Need Lockout/Tagout? - Panduit0.pdf · Why do I Need Lockout/Tagout? ... OSHA outlines the LOTO safety method in standard 29 CFR 1910.147 “Control of Hazardous Energy”
LOCKOUT/TAGOUT POLICY - Mission City · PDF fileScope The OSHA Control of Hazardous Energy (Lockout/Tagout) standard (29 CFR 1910.147) covers the servicing and maintenance of
LOCKOUT/TAGOUT POLICY - Mission City · PDF fileScope The OSHA Control of Hazardous Energy (Lockout/Tagout) standard (29 CFR 1910.147) covers the servicing and maintenance of
OSHA Lockout Safety General Industry
OSHA Lockout Safety General Industry
CIRLOCK Lockout Device for Miniature C/B’s with toggle in the middle SPLD-M2 Lockout Device for Miniature C/B’s with toggle at bottom SPLD-1 Lockout Device for MCCB’s - …
CIRLOCK Lockout Device for Miniature C/B’s with toggle in the middle SPLD-M2 Lockout Device for Miniature C/B’s with toggle at bottom SPLD-1 Lockout Device for MCCB’s - …
Lockout/Tagout for Injection Molding Control of Hazardous Energy OSHA 10-Hour Outreach Training Program for the Plastics Processing Industry A Presentation
Lockout/Tagout for Injection Molding Control of Hazardous Energy OSHA 10-Hour Outreach Training Program for the Plastics Processing Industry A Presentation
LOCK-OUT/TAG-OUT Secure Safely...Training for THE OSHA LOCK-OUT/TAG-OUT STANDARD The Control of Hazardous Energy (Lockout/Tagout), Title 29 CFR Part 1910.147 WARRANTY/DISCLAIMER Lockout/Tagout
LOCK-OUT/TAG-OUT Secure Safely...Training for THE OSHA LOCK-OUT/TAG-OUT STANDARD The Control of Hazardous Energy (Lockout/Tagout), Title 29 CFR Part 1910.147 WARRANTY/DISCLAIMER Lockout/Tagout
Control of Hazardous Energies - OSHA 10-Hour and … •References •Primary references include: – 29 CFR 1910 Subpart S – 29 CFR 1910.147, Lockout/Tagout – OSHA Training Institute
Control of Hazardous Energies - OSHA 10-Hour and … •References •Primary references include: – 29 CFR 1910 Subpart S – 29 CFR 1910.147, Lockout/Tagout – OSHA Training Institute