© AUDIPACKMKT Series-01-2010-02
®AUDIPACK
AUDIPACKIndustriestraat 2
2751 GT MoerkapelleThe Netherlands
Tel: +31(0)795931671Fax: +31(0)795933115
Email: [email protected]
www.audipack.com
MKT Series
DISTRIBUITO DA:
VIA PLINIO, 43 - 20129 MILANO (MI) T. 02 87166000, 06 92938446 F. 02 87153173 E. [email protected] W. www.agmultivision.it
© AUDIPACKMKT Series
© AUDIPACKMKT Series-02-2008-06
OPTIONAL
1x
1x
1x or: 1x
1x
1x
1x
IR
RF2xAAA 1.5V
IR 260195RF 260196
39....
260192
CHECKLIST
261119 261134 261135
1x
Ceiling Finishing Mask
Part No. Model
603336 P0992
603709 P1592
600958 P1645
600928 P2806
611821 P3192
621189 P3728-MK2 265
PRO D UCT : M OD EL: A
P0992-P3710 M KT -15 0 ± 300-350 mm
P1592-P1788 (open) P1777 (closed) M KT -20 0 ± 350-400 mm
P1645-P1788 (open) M KT -25 0 ± 400-450 mm
P2806 M KT -15 0WS (Wide Sc reen) ± 300-350 mm
P3192 M KT -20 0WS (Wide Sc reen) ± 350-400 mm
P3728 M KT -26 5WS (Wide Sc reen) ± 450-500 mm
© AUDIPACKMKT Series-03-2010-02
A
A
SITUATION
MM ( 1 : 2.5 )
© AUDIPACKMKT Series-04a-2009-12
A
DIN 571 - M8x.....DIN 16168 - M8x.....
MM
24VDC - max.1.88 Amp.
1A (20x5mm)
POWER LED
.....mm
80m
m
.CONCRETEBETONBETONBETON
HOUTWOODBOISHOLZ
3x
1.
2.1
install level
MKT Series-04b-2008-06 © AUDIPACK
K1
k2
K2
k1
k2k1
UP DOWN COMMON
UP DOWN
External cable control box
External cable control box(not the motor control box!)
A
UP COMMONDOWN
BM
2.2 External control: control by relay.
WARNING:The tension on these wires can be 12-24 VDC and 230 VAC!
Wall switch(with neutral position)
(not supplied)
Controlled by computer (for example).
-A and B are potential free contacts.-A: up or down.-B: down or up.-M: middle position (!).
-K1 and K2 are relays.-k1 and k2 are relays.
2.3 External control: control by wall switch.
Note: to control the system pulse or constant, and adjust the maximum power, please see 'appendix 260204 MOTOR CARD'.
© AUDIPACK MKT Series-05-2009-12
3.
4.
UP
CO
MM
ON
DO
WN
Note: to control the system pulse or constant, and adjust the maximum power, please see 'appendix 260204 MOTOR BOARD'.
Safety stop/ emergency switch.
See page, 2.2:EXTERNAL CONTROL.
OPTIONAL
Note:Always insert the green connectorin the unit,after installation of the product.
© AUDIPACK MKT Series-06-2008-06
M6x20 (4X) / M5x20 (4X)
39..........
5.
6.1.
© AUDIPACKMKT Series-07-2010-02
MAX. 500mm
BMAX. 130mm
Max.15 kg
≤ 100mm
M6x20 (4X) / M5x20 (4X)
39........
6.2.
7.
© AUDIPACKMKT Series-08-2008-06
- ADJUSTMENT FEATURES
30-50mm
8.
9.
+/-
+/-
Detail A
Detail A
© AUDIPACKMKT Series-09-2008-06
A
9.1. Fine adjustment main mirror in opened position.
9.2. Fine adjustment main mirror in opened position.
α
1
2
1. Do not remove the red sealed nut! 2. Raw adjustment of the mirror (α). Release the 2 small srews on the rod-nut and slide it to the correct position when the mirror is in aproximate end position. Fasten the 2 small screws after setting.
1
2
1. Release to adjust. Do not remove!
2. Fine adjustment (a α). Release the small philips screw
to adjust the limit switch of the main mirror in opened position, by turning the Hexbolt left or right. The end switch will set the right position. When tested and approved, fasten the Philips screw again.
10
© AUDIPACK MKT Series-10-2008-06
-10.1.1.
-10.1.5.
-10.1.2.-10.1.3.-10.1.4.
-10.2.1.-10.2.2.-10.2.3.-10.2.4.
-10.3.4.-10.3.3.
-10.3.1.-10.3.2.
-10.3.6.-10.3.5.
-10.3.7.
10.2. Custom finishing
10.1.Ceiling frame connected to ceiling
10.3. Ceiling frame connected to Mirrorkit
(Without finishing).
© AUDIPACKMKT Series-11-2010-02
B
A15M
AX
. m
m
10.1.1.
10.1.2.
A B
© AUDIPACKMKT Series-12-2010-02
H
AB
M4x12 (6X) +
10.1.3.
10.1.4.
© AUDIPACK MKT Series-13-2008-06
- 10.2.2.- 10.2.3.
10.1.5.
10.2.1.
A-A ( 1 : 10 )
MM-MM ( 1 : 10 )
B ( 1 : 2 )
C ( 1 : 2 )
D ( 1 : 2 )
© AUDIPACKMKT Series-14-2010-02
A
A
MM
MM
B CD
A
B
10-1
5mm
Max.2 kg.
5-6mm 5-6mm
5-6mm
85°
5-6mm
15
70
10.2.2.
10.2.3.
A B
A-A ( 1 : 12.5 )
. ( 1 : 2.5 ). ( 1 : 2.5 )
© AUDIPACKMKT Series-14a-2010-02
A
A
..
10.2.4.
10.2.5.
1510
-m
m
B
A
Max.2 kg.
B A
5-6mm85°
5-6mm
!
© AUDIPACKMKT Series_15a_2010-02
B
A15
MA
X.
mm
10.3.1.
10.3.2.
A B
© AUDIPACKMKT Series_15b_2010-02
A
B
M4x12 (2X) +
10.3.3.
10.3.4.
Product Model A B
P0992 MKT-150 420-435 mm 415-430 mm
P1592 MKT-200 445-460 mm 455-470 mm
P1645 MKT-250 445-460 mm 455-470 mm
P2806 MKT-150WS (wide screen) 480-495 mm 445-460 mm
P3192 MKT-200WS (wide screen) 515-530 mm 455-470 mm
P3728 MKT-265WS (wide screen) 620-635 mm 540-555 mm
611329
601754
DETAIL VIEW A
© AUDIPACKHandleiding MKT Series_15c_2008-06
A
10.3.5.
10.3.6
M4x12 (4X) +
M4x12 (8X) +
10.3.5
611330
611328
© AUDIPACKHandleiding MKT Series_15z_2008-06
- 12.- 13.
10.3.7
11. Remote control
© AUDIPACK MKT Series-16-2009-12
X
W
1
24-6 +
310-12 +
10-12
7-9
32
4-6
1
x xxx
LL
0123456789ABCDEF
=10=11=12
1-12 CHANNELS1-12 KANALEN1-12 CANAUX1-12 KANALEN
NR.1
NR.5
NR.12
RF-12 IR-12
868 MHz PROTOCOL RECS 80
12. Remote Control
13. Remote Control
NOTE:When installing the remote PCB,be sure that the powersupplyis not plugged in.
260192
-----Yellow-----Red-----Black
© AUDIPACKMKT Series-17-2008-06
POWER
LOAD
MAX. 15 kg
PRIMAIR - 100-240 V AC, 47~63Hz / SECUNDAIR 24 V DC, 1.05A
LOAD P3728 MAX. 35 kg
A
C
B
DIMENSIONS
637
D
TECHNICAL DATA
PRODUCT: MODEL: A B C D P1698 MKT-150T 340 mm 380 mm 353 mm 562 mm
P1779 MKT-200T 370 mm 420 mm 503 mm 590 mm
© AUDIPACKMKT Series-17b-2008-06
POWER
LOAD
MAX. 15 kg
PRIMAIR - 100-240 V AC, 47~63Hz / SECUNDAIR 24 V DC, 1.05A
DIMENSIONS
TECHNICAL DATA
D
B
AC
602
MKT Series-18-2007-10 © AUDIPACK
AUDIPACKIndustriestraat 2-4
2751 GT Moerkapellethe Netherlands
Tel: +31(0)795931671Fax: +31(0)795933115
Email: [email protected]
www.audipack.com®AUDIPACK
Audipack reserves the right to make changes in specifications and other informationcontained in this document without prior written notice. The information provided hereinis subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but notlimited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.
Audipack's general conditions of sales and delivery apply to all of Audipack's deliveries.These conditions can be downloaded from Audipack's website, www.audipack.com, or will be sent
by post on request.
Audipack liefert ausschließlich unter die allgemeine Verkauf- und Lieferungsbedingungen vonAudipack.
Diese Bedingungen sind zum downloaden verfügbar auf die Webseite von Audipack,www.audipack.com, oder werden Ihnen auf Anfrage per Post gesendet.
Alle leveringen geschieden uitsluitend volgens de Algemene Verkoop- en Leveringsvoorwaardenvan Audipack.
Een afschrift hiervan kunt u downloaden van de website van Audipack, www.audipack.com, ofwordt u op aanvraag gestuurd per post.
Les conditions de vente et de livraison de Audipack s'appliquent à tous les livraisons de Audipack.Cettes conditions sont disponible sur le site internet de Audipack, www.audipack.com, où seront
envoyé par poste sur demande.
Wiring diagram for Mirror-Kit's
End Switch Mirror Open
End Switch Mirror Close
Power Supply 261119 with Power Cord 261134.
Model Motor
MKT-150 460011
Mirror motor MKT-150WS 460011
MKT-200 460012
MKT-250 460012
MKT-265 460012
MKT-200WS 460012
MKT-150T 460016
MKT-150WST 460016
MKT-200T 460223
MKT-200WST 460223
MKT-250T 460223
This diagram is suitable for the models:
MKT-150/MKT-150-T/MKT-150WS/MKT-150WS-T
MKT200/MKT-200-T/MKT-200WS/MKT-200WS-T
MKT-250/MKT-250-T
MKT-265
260204
260205
Up
Dow
n
Com
24V DC in
21
22
261086
13
14
261085
See MKT manual page 6 (chapter 3)
for connection's
Audipack ®www.audipack.comIndustriestraat 2-42751 GT MoerkapelleThe [email protected]
Product : Mirror-kitType : MKT-150, MKT-200, MKT-250, P3192, P1698
D Konformitätserklärung für Maschinen
Wir erklären hiermit daß die Produkte konform sind mit den einschlägigen
Bestimmungen der EG-Maschinen richtlinie:
Maschinenrichtlinie 89/392/EEG mit 91/368/EEG und 93/44/EEG
EMC 89/336/EEG mit EN 55014 und EN 55104
Niederspannung 73/23/EEC mit EN 60335/1
F Declaration CE de Conformite pour les machines
Nous declare que les produits sont en conformité avec
la Directive pour les machines
Machine 89/392/EEG with 91/368/EEG and 93/44/EEG
EMC 89/336/EEG with EN 55014 and EN 55104
(Low voltage 73/23/EEC with EN 60335/1)
GB EC-declaration of conformity for machines
We declare that aforesaid product is constructed in compliance with the following directives
with the following directives
Machine 89/392/EEG with 91/368/EEG and 93/44/EEG
EMC 89/336/EEG with EN 55014 and EN 55104
(Low voltage 73/23/EEC with EN 60335/1)
E EC-Declaracio'n de la conformidad para las máquinas
Declaramos que el producto antedicho está construido en conformidad
con los directorios siguientes
Machine 89/392/EEG with 91/368/EEG and 93/44/EEG
EMC 89/336/EEG with EN 55014 and EN 55104
(Low voltage 73/23/EEC with EN 60335/1)
NL EG-verklaring van overeenstemming voor machines
Wij verklaren dat bovengenoemd produkt volgens de onderstaande
normen en richtlijnen is geconstrueerd:
Machine 89/392/EEG with 91/368/EEG and 93/44/EEG
EMC 89/336/EEG with EN 55014 and EN 55104
(Low voltage 73/23/EEC with EN 60335/1)
S EG-försäkran om överensstämmelse
Tillverkare försäkrar härmed att produkt
är tillverkade i överensstämmelse med EG's Maskindirektiv:
Machine 89/392/EEG with 91/368/EEG and 93/44/EEG
EMC 89/336/EEG with EN 55014 and EN 55104
(Low voltage 73/23/EEC with EN 60335/1)
Audipack,Moerkapelle (NL), 24-11-2006 R&D
subje
ct to c
hange w
ithout prior notice
. Copyr
ight Audip
ack
® 2
005