page
Your equipment serial number and order number have been recorded in
the space below. Please include these numbers when requesting service
or ordering parts.
MANUFACTURED BY KOLBERG-PIONEER, Inc. YANKTON, SD, U.S.A.
JOB ORDER
MODEL S/N
KOLBERG-PIONEER, INC.
4085314450 Jaw
Use IB229 for Operation Manual
g
603712
Serial Number Plate Location
RearFront
page
This bulletin contains replacement parts listings for your equipment. In most cases an
illustration is used to identify the assembly, with each illustration is a parts list identifying
serviceable parts.
In some cases no illustration is available or required and just a parts list is shown.
When a part name is indented, it means the serviceable item is a part of the item under
which it is listed. The quantity of parts shown with these indented items are for the assem-
bly only and not the entire machine.
EXAMPLE:
Ref.No. Description Part No. Qty. 1 Coupling Assembly AEP-19630 2
Coupling Flange 44-25039 2
Bushing 44-25053 1
Abbreviations and Symbols Used In This Parts Book
* See notes at bottom of page
N/S Not Serviced
X Parts not exactly as shown
O/E Optional Equipment
P/N Part Number
KOLBERG-PIONEER, INC. reserves the right to make changes or add improvements to
its products at anytime, without incurring any obligation to make such changes on previ-
ously manufactured equipment.
Although care has been taken to assure the accuracy of this publication, KOLBERG-
PIONEER, INC. does not assume any liability for errors or omissions.
Quantity for machine
Quantity for assemblyThis item contains
these items.
INTRODUCTION
g
page
CONTENTS
g
ORDERING PARTS .............................................................................................................. 1
JAW CRUSHER BASE ......................................................................................................... 2
WEDGE ADJUST ASSEMBLY ............................................................................................. 3
WEDGE ADJUST WEAR LINERS AND TOGGLE PLATE .................................................... 4
TENSION ROD ASSEMBLY.................................................................................................. 5
FLYWHEEL ASSEMBLY DRIVE ........................................................................................... 6
FLAT FLYWHEEL ASSEMBLY.............................................................................................. 7
WEAR LINERS .................................................................................................................. 8-9
JAW WEDGE AND JAW PLATES ................................................................................. 10-11
PITMAN / SHAFT ASSEMBLY ....................................................................................... 12-13
HYDRAULIC ADJUST ASSEMBLY ................................................................................ 14-15
page
ORDERING PARTS
We want to service your equipment promptly and accurately. Your observance
of the instructions below will greatly aid us in giving you such parts service.
When ordering parts be sure you supply the following:
(A) Part Numbers, (B) Descriptions, (C) Quantities
(D) Serial Numbers, (E) Shipping Instructions.
(A) PART NUMBERS
Compare part number found on the part with part number in the parts book,
whenever possible. When part number is not available, give full description and
where used.
(B) DESCRIPTIONS
Use Part Book descriptions in addition to part numbers. Most structural parts,
such as framework, gussets, braces etc., are not listed. To order such parts, give
size, shape (channel, angle, plate, etc.), and location, as related to units or
groups identified in the parts book.
(C) QUANTITIES
Be specific. State exactly how many of each part are required. Avoid the
use of words like “sets” or “complete”.
(D) Identify your equipment by Serial Number whenever possible.
(E) SHIPPING INSTRUCTIONS
Specify name, shipping point, and mail address for notification if different
than shipping point. State whether freight, express, parcel post or other handling is
desired. Confirm telephone orders in writing.
INSPECTION
Shortages or damage should be noted by the carrier agent at time material
is accepted. Shipper’s responsibility ceases upon delivery of shipment to carrier
in good order. Claims for damage or loss can likely be collected with proper
notation on delivery receipt.
ORDER EARLY
Make periodical inspections of equipment. Wear parts can be ordered by
mail ahead of actual replacement time. Save on telephone expense and have
material on hand when needed.
1
page 2
JAW CRUSHER BASE
Ref.No. Description Part No. Qty.
1 Base, Jaw 210271 1
2 Bolt 151966 4
Washer 233742 4
Shear Block 211268 4
1
2
page 12
PITMAN / SHAFT ASSEMBLY
for bolts
see jaw crusher
base page
3
25
19
23 20
2 1
6
5
918
20
2322
21
22
19 FIXED SIDEFLOAT SIDE
B
B
24
16 15
25
17
SECTION D-D
21
19
1012
16
15
7
8
1314
4
17
DETAIL B
1
1.122
2033
19735
1.8
1.9
1.10
20
22
23
33
21
19
18
16
7
35
page
PITMAN / SHAFT ASSEMBLY
13
ECCENTRIC SHAFT ASSY 206140
DESCRIPTIONQTYPART NO.ITEM
PITMAN ASSY11885651
WEAR PLATE1BB-731371.1
HEX CAPSCREW 3/4845-001691.10
WASHER;3/4845-600091.15
LOCKNUT845-421651.17
MOVING JAW KEY1WSC-010461.8
HEX CAPSCREW 3/4145-001531.9
LOCKNUT;3/4145-421611.16
PULL-OFF COLLAR2WSC-009882
BEARING209-350323
BEARING COVER2WSC-009894
FIXED END INNER COVER12061585
FLOATING END INNER COVER12061596
BEARING HOUSING2L-037767
BEARING209-350318
ADAPTOR SLEEVE, BEARING2WSC-010159
LOCKNUT209-2014010
LOCKPLATE209-2013811
SPACER COLLAR2WSC-0099112
HEX CAPSCREW 5/81045-0609313
LOCKWASHER; 5/81045-6004314
LOCKWASHER; 3/41645-6004415
CAP SCREW; 3/416CP-7238916
BRG COVER; OUT, FXD1WSC-0098617
BRG COVER; OUT, FLT1WSC-0098518
SHAFT FLINGER COLLAR2WSC-0111119
SHAFT SPACER FOR HOLDING FLYWHEEL2CP-6402720
FLYWHEEL SPACER2BB-7354121
LOCKNUT209-2009922
LOCKWASHER209-2010023
LUBE FITTING243-0001524
PIPE PLUG,247-1802625
CAPSCREW; 5/864AA-5570626
SETSCREW; 5/8445-3603127
BRASS WASHER; 5/86445-6009028
STAINLESS STEEL WIRE35'303429
STR KEY220614532
ECC. SHAFT, W/LOCKNUTS120615333
SHAFT FLINGER COLLAR220615534
CLOSURE BAND ON PILLOW BLOCK220615435
page
HYDRAULIC ADJUST ASSEMBLY
15
- 265691 1 POWER UNIT
Replaceable Parts for Motor 265691
Motor 213640
Pump 218200
Coupling 224239
Replaceable Parts
for Valve 202600
Handle 240945
page
g
FFFFFor Seror Seror Seror Seror ServiceviceviceviceviceKPI -Toll free - 800-532-9311 (605-665-9311)
Fax- 800-514-6115 (605-665-9348)
JCI - Toll free - 866-875-4058 (541-736-1400)
Fax - 541-988-9501
FFFFFor Por Por Por Por PararararartststststsKPI - Toll free - 800-766-9793 (605-665-9793)
Fax - 605-665-9348
JCI - 888-474-0115 (541-736-1400)
Fax - 541-988-9487
5/07