![Page 1: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/1.jpg)
MQL SHRINKFIT HOLDERS
![Page 2: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/2.jpg)
Copyright © Seco Tools AB
Safety first
Safety is our top priority
Emergency Exit
Emergency Number
Protective Equipment
Assembly Point
Alarm
2
![Page 3: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/3.jpg)
Copyright © Seco Tools AB
What is MQL?
MQL: Minimum Quantity Lubrication
• Mix of air and oil
• Volume of coolant highly reduced
• MQL1 and MQL2 technologies
Main advantages
• overall coolant costs reduced
• keeps the machine environment and workpiece
clean
• reduces the need for recycling coolant floods
• makes the recycling of chips easier
• reduces the exposition of operators to chemicals
3
MQL
Conventional
coolant fluid
Vo
lum
e o
f co
ola
nt
![Page 4: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/4.jpg)
Copyright © Seco Tools AB
Requirements to implement MQL
4
MQL COOLANT
SUPPLY UNIT
Tool holder according
to standard
DIN 69090-3
Coolant tube
MQL
Stop end
screw MQL
Tool
designed for
MQL
Machine equiped for MQL
• MQL coolant supply unit
• Spindle designed for MQL
• Specific aspiration
Tool holder designed for MQL*
• Specific internal design
• Specific accessories
Tools designed for MQL
• specific coolant channels
• tapered tool shank designed according to
standard DIN 69090-3.
* Seco’s solution is designed according to DIN 69090-3; Other suppliers of
MQL solutions may use their own, patented solutions.
![Page 5: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/5.jpg)
Copyright © Seco Tools AB
MQL tool holders: Seco’s offer
EPB 5403M
• Shrinkfit holders (according to standard DIN 69090-3) and
ready for MQL1 and MQL2
• Coolant tubes and stop end screws to be ordered separatly
Suitable for:
• customers willing to run tests with different accessories to
optimise a MQL process
• Customers already equipped with MQL accessories
Code key
5
E9304 5403 0680 M Designed for MQL1
and MQL2
![Page 6: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/6.jpg)
Copyright © Seco Tools AB
MQL tool holders: Seco’s offer
EPB 5403M1
• Shrinkfit holders, , according to standard DIN 69090-3, and
equipped for MQL1
• Coolant tube and stop end screw mounted when delivered
• Laser marking allowing identification of the MQL1 solution
– MQL marking in the HSK V-flange
– Product description « M1 »
Code key
6
E9304 5403 0680 M1 Equipped for MQL1 (one combinaison « tool
holder +MQL1
accessories » possible)
![Page 7: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/7.jpg)
Copyright © Seco Tools AB
MQL tool holders: Seco’s offer
EPB 5403M2
• Shrinkfit holders, , according to standard DIN 69090-3, and
equipped for MQL2
• Coolant tube and stop end screw mounted when delivered
• Laser marking allowing identification of the MQL12
solution
– MQL marking in the HSK V-flange
– Product description « M2 »
Code key
7
E9304 5403 0680 M2-1.9
Equipped for MQL2 (several combinations
« tool holder +MQL2
accessories » possible)
External diameter
of the coolant
Tube*
*see explanations in slides “MQL2”
![Page 8: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/8.jpg)
MQ
L1
![Page 9: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/9.jpg)
Copyright © Seco Tools AB
MQL1: one channel
9
MQL1 COOLANT
SUPPLY
Oil and air mixture
externally
One channel
Oil + Air
Rotary
union Spindle
MQL Shrinkfit
holder
Stop end
screw
MQL1
Coolant tube
MQL1
Oil and air mixed before the machine spindle
Conveyed through one channel to the tool holder
![Page 10: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/10.jpg)
Copyright © Seco Tools AB
MQL1 coolant tube
10
HSK-A63
• conventional coolant tube
HSK-A100
• MQL1 coolant tube
• Internal coolant diameter optimised for
MQL
– Tapered from Ø12 to Ø8mm
![Page 11: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/11.jpg)
Copyright © Seco Tools AB
MQL1 stop end screw
11
Adapted to MQL tool shank: taper according to
standard DIN 690903-3
Short and long version, depending on the
length projection of the tool holder
Tapered contact surface
Short version
19MQL1xxS
Long version
19MQL1xxL
![Page 12: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/12.jpg)
Copyright © Seco Tools AB
MQL1 accessories: code keys
12
MQL1 Coolant tube MQL1 Stop screw
Short version
19MQL1xxS
Long version
19MQL1xxL
2 stop screws available, for each tool shank diameters
The choice between the short and the long version
depends on the gauge length of the tool holder. See
correspondence tables in catalogue pages.
HSK-A63: MQL1 Shrinkfit holders use a conventional
coolant tube 20E9304
HSK-A100: specific coolant tube 20E9306M1
• the internal diameter adapted to optimize the MQL flow
(tapered from Ø12 to Ø8mm).
![Page 13: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/13.jpg)
MQ
L2
![Page 14: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/14.jpg)
Copyright © Seco Tools AB
MQL2: 2 channels
14
MQL2 COOLANT
SUPPLY
Oil and air supply through
2 independent channels
Oil Air
Rotary
union Spindle
MQL Shrinkfit
holder
Stop end
screw
MQL2
Coolant tube
MQL2
Mixing
chamber
Oil and air conveyed to the tool holder through 2 separate channels
Oil and air mixed in the mixing chamber of the MQL2 coolant tube
![Page 15: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/15.jpg)
Copyright © Seco Tools AB
Main difference between MQL1 and MQL 2 accessories
15
MQL2: Coolant pipe of the coolant tube
connecting to the stop end screw
Several coolant tubes and stop end screws
per tool shank diameter (see next slides)
MQL2
MQL1
![Page 16: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/16.jpg)
Copyright © Seco Tools AB
MQL2 accessories
16
Variety of MQL2 coolant tubes
• For each tool shank diameter
• Different coolant channels diameters
– Depending on the coolant channels of the
tool (see next slides)
• Different pipe lengths
– Depending on the tool projection
Variety of MQL2 stop end screws
• Selected in step with the MQL2 coolant
tube above
Refer to catalogue pages for details
Coolant tubes
MQL2
Stop end screws
MQL2
![Page 17: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/17.jpg)
Copyright © Seco Tools AB
MQL2 accessories: code keys
17
20E9304 M2A 01
E9304=HSK-A63
E9306=HSK-A100
Code corresponding to the length
of the pipe
1=short
16=longest
For MQL2
Code corresponding to the internal
diameter of the pipe
A=smallest diameter
D=widest diameter
19MQL2A01
Code corresponding to the tool
shank diameter
1=smallest shank diameter
2=second smallest shank diameter
…
9=widest shank diameter
For MQL2
Code corresponding to the internal
diameter of the pipe
A=Ø2mm C=Ø4.1mm
B=Ø2.9mm D=Ø5.4mm
D=widest diameter
MQL2 Coolant tube MQL2 Stop screw
![Page 18: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/18.jpg)
Copyright © Seco Tools AB
MQL2 accessories: selection
Selection based on the coolant
channels of the tools
Cross-sectional ratio of 1 to 4
1x Atool ≤ ADIF1 ≤ 4x Atool
Several combinations: priviledge
ratio closest to 1
Refer to the product pages in the
catalogue for easier selection of
the tools
18
![Page 19: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/19.jpg)
Copyright © Seco Tools AB
MQL1 vs. MQL2
19
MQL 1 MQL 2
Possible to change from a conventional coolant system to a
MQL1 system.
Does not allow to switch from a conventional coolant system to
a MQL2 system.
Can be implemented on multi-spindle machines. Very complicated to implement on multi-spindle machines.
The rotational speed influences the quality of the flow (the
flow must be adapted to the speed).
The rotational speed does not influence the quality of the flow
(same flow quality, dependless of the speed).
Modification of the coolant parameters (quantity of coolant,
ratio oil/air…) is very slow. Not convenient when quick tool
changes are necessary.
Fast adaptation to parameter changes. Suitable when quick tool
changes are needed.
Limited volumes/min of coolant can be delivered to the tool
(150ml/min).
Higher volumes/min can be delivered to the tool (400ml/min).
Pressure 5 bars minimum required. Pressure 4 bars minimum required.
![Page 20: MQL SHRINKFIT HOLDERS · 2020. 3. 9. · MQL tool holders: Seco’s offer EPB 5403M1 • Shrinkfit holders, , according to standard DIN 69090 -3, and equipped for MQL1 • Coolant](https://reader036.vdocument.in/reader036/viewer/2022062609/60f77162d3893078aa417fb3/html5/thumbnails/20.jpg)