Download - MSDS M.E.K
Page : 1MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
Responsible for distribution: In case of emergency:BRENNTAG N.V. Belgium:Nijverheidslaan 38 - BE-8540 DEERLIJK Antipoison Center - Brussels :TEL: +32(0)56/77.69.44 - FAX: +32(0)56/77.57.11 TEL: 070/245.245E-MAIL : [email protected] - Website: www.brenntag.be
BRENNTAG Nederland B.V. The Netherlands:Donker Duyvisweg 44 - NL-3316 BM DORDRECHT National Poisoning Information Center - Bilthoven :TEL: +31(0)78/65.44.944 - FAX: +31(0)78/65.44.919 TEL: 030/274.88.88E-MAIL : [email protected] - Website: www.brenntag.nl
1. Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
* Chemical description : Methyl ethyl ketone , Butanone , MEK .
Type of product : Pure product .
* Reach registration number : 01-2119457290-43
1.2. Relevant identified uses of the substance or mixture and uses advised against
* Identified use(s) : At this time we do not yet have information on identifed uses. They will be includedwhen available.
* Use(s) advised against : At this time we do not yet have information on uses advised against. They will beincluded when available.
1.3. Details of the supplier of the safety data sheet
Company identification : See heading of Material Safety Data Sheet.
1.4. Emergency telephone number
Emergency phone number : See heading of Material Safety Data Sheet.
2. Hazards identification
2.1. Classification of the substance or mixture
Classification according to Directive 67/548/EEC or 1999/45/EC
F; R11R66R67Xi; R36
Classification according to Regulation (EC) No 1272/2008
Butanone*
• Flammable liquids Cat.2 (H225_D) • Eye irritation Cat.2 (H319_W) • STOT Drowsiness-dizziness Cat.3 (H336_W) • STOT (Repeated) Skin dryness-cracking (SP-R66)
2.2. Label elements
Label in accordance with Regulation (EC) No 1272/2008
• Dangerous ingredient(s) : Butanone
• Hazard pictogram(s)*
* • Signal word : Danger
BRENNTAG
Page : 2MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
2. Hazards identification (continued)
* • Hazard statements : H225 - Highly flammable liquid and vapour. H319 - Causes serious eye irritation.H336 - May cause drowsiness or dizziness. EUH066 - Repeated exposure maycause skin dryness or cracking.
* • Precautionary statements
* - Prevention : P210 - Keep away from heat, sparks, open flames or hot surfaces. – No smoking.P261 - Avoid breathing dust, fume, gas, mist, vapours, spray.
* - Response : P303+P361+P353 - IF ON SKIN (or hair) : Remove immediately all contaminatedclothing. Rinse skin with water/shower. P312 - Call a POISON CENTER or doctor ifyou feel unwell.
* - Storage : P233 - Keep container tightly closed. P403+P235 - Store in well-ventilated place.Keep cool.
* - Disposal considerations : P501 - Dispose of this material and its container to hazardous or special wastecollection point, in accordance with local, regional, national and/or internationalregulation.
2.3. Other hazards
* Physical/chemical hazards : See above.
* Hazards for the health : The product may cause central nervous system depression.
* Hazards for the environment : No significant danger. This product is no substance or contains no PBT or vPvB (inaccordance with Annex XIII).
* Hazards for the safety : Vapour is heavier than air and spreads along the ground with risk of ignition ondistance.
3. Composition/information on ingredients
3.1. Substances
CAS nr EINECS nr EC annex nrName component(s) Weight % Reach nr CLASSIFICATION
Butanone : 100 % 78-93-3 201-159-0 606-002-00-3 01-2119457290-43 F; R11*R66R67Xi; R36----------------------------------Flam. Liq. 2; H225Eye Irrit. 2; H319STOT SE 3; H336STOT SE EUH066
*
The full text of the R-phrases and (EU)H-statements is in section 16.
4. First aid measures
4.1. Description of first aid measures
General : In case of doubt or persistent symptoms, call a physician.Never give anything by mouth to an unconscious person.
First Aid Measures
- Inhalation : Remove victim into fresh air.Allow the affected person to rest.If not breathing, give artificial respiration.Consult a doctor.
- Skin Contact : Remove contaminated clothing.Rinse skin immediately with plenty of water. (shower if necessary).Consult doctor if irritation develops.
BRENNTAG
Page : 3MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
4. First aid measures (continued)
- Eye Contact : Rinse immediately thoroughly and long (at least 15 min.) with plenty of water.Remove contact lenses.Consult eye doctor.Do not use a neutralisation agent.
- Ingestion : DO NOT INDUCE VOMITING. Rinse mouth with water.Seek medical attention or take to hospital.
4.2. Most important symptoms and effects, both acute and delayed
See section 11.*
4.3. Indication of any immediate medical attention and special treatment needed
For specialist advice doctors should contact the NVCI or the Belgian Poison center.*
5. Firefighting measures
5.1. Extinguishing media
Extinguishing Media
- Suitable : Powder , Alcohol resistant foam , Carbon dioxide , Water spray .
- Insuitable : Do not use a heavy water stream, in order to avoid the fire to extend.
5.2. Special hazards arising from the substance or mixture
Special Exposure Hazards : Fire may liberate carbon oxides (CO) and smoke.
5.3. Advice for firefighters
Special Protective Equipment for : Use self-contained breathing apparatus when in close proximity to fire.Firefighters
Special Procedures : Apply water spray or fog to cool nearby equipment. Avoid fire-fighting water to enterenvironment.
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal Precautions : Eliminate every possible source of ignition (open fire, sparks, smoking, ...).Evacuate all personnel immediately and ventilate area.Avoid breathing vapour and contact with skin, eyes and clothing. Wearrecommended personal protective equipment. (See section 8)
6.2. Environmental precautions
Environmental Precautions : Shut off leaks if without risks.Dike in the spilled product as much as possible with inert material.Prevent entry of product in public water, sewers or soil.Notify authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for Cleaning Up : Collect the spillage in closable, suitable disposal containers.Clean up any spills as soon as possible, using an inert absorbent material andeliminate as hazardous waste. (See section 13)Residue is to be washed down with plenty of water.
6.4. Reference to other sections
For personal protection, see section 8.*
For the removal of the waste product, see section 13.
BRENNTAG
Page : 4MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
7. Handling and storage
7.1. Precautions for safe handling
* Handling : AVOID FOG TRANSFORMATION !Avoid breathing vapour and contact with skin, eyes and clothing. Wearrecommended personal protective equipment. (See section 8)
* Protection against Fire and Explosion : Eliminate every possible source of ignition (open fire, sparks, smoking, ...).With a temperature equal to or higher than the flash point, the mixture steam-airmay create a highly flammable and explosive mixture.Use special care to avoid static electric discharges.Do not use compressed air to either agitate or transfer contents of storagecontainers (tanks) / shipping drums containing this material.Use explosionproof equipment.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original, safely locked container in a cool, well ventilated andfireproof place.Store away from all heat sources, including direct sunlight.All dangerous products should be placed on a drip tray or should be barreled.Keep away from : Oxidizing agents .
Packaging Material : Butyl rubber , Carbon steel , Polyester , Stainless steel , Teflon .
* Insuitable Packaging Material : EPDM , Natural rubber , Polyethylene , Polystyrene , PVA , PVC .
7.3. Specific end use(s)
For identified uses, see subsection 1.2 and/or exposure scenarios.*
8. Exposure controls/personal protection
8.1. Control parameters
* Occupational Exposure Limits : Butanone : Limit value (BE) : 200 ppm (600 mg/m³) (2009)Butanone : Short time value (BE) : 300 ppm (900 mg/m³) (2009)Butanone : Limit value (TWA 8 h) (NL) : 200 ppm (590 mg/m³) (2007) (H)Butanone : Limit value (TWA 15 min) (NL) : 300 ppm (900 mg/m³) (2007) (H)(H) The addition of an "H" indicates that the substance is relative easily absorpedby the skin.
* Biological limit values : They will be included when available.
* DNELs : • Butanone : Worker, long-term - systemic effects, dermal : 1161 mg/kg bw/ day• Butanone : Worker, long-term - systemic effects, inhalation : 600 mg/m³• Butanone : Consumer, long-term - systemic effects, dermal : 412 mg/kg bw/ day• Butanone : Consumer, long-term - systemic effects, inhalation : 106 mg/m³• Butanone : Consumer, long-term - systemic effects, oral : 31 mg/kg bw/ day
* PNECs : • Butanone : Marine water : 55,8 mg/l• Butanone : Fresh water : 55,8 mg/l• Butanone : Intermittent release : 55,8 mg/l• Butanone : Fresh water sediment : 284,7 mg/kg• Butanone : Marine water sediment : 284,7 mg/kg• Butanone : Soil : 22,5 mg/kg• Butanone : Sewage treatment plant : 709 mg/l
8.2. Exposure controls
Engineering Measures : Ventilate area.
Industrial Hygiene : When using, do not eat, drink or smoke.Emergency eye wash fountains and showers should be available in the immediatevicinity of any potential exposure.
BRENNTAG
Page : 5MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
8. Exposure controls/personal protection (continued)
Personal Protection Equipment
- Respiratory Protection : Ventilation , Local exhaust , Respiratory protection equipment ( Filter type A).
- Skin and Body Protection : Suitable protective clothing .
- Hand Protection : Gloves ( Butyl rubber , ...).
- Eye Protection : Closed safety glasses or face shield.
* Environmental exposure controls : See sections 6, 7, 12 en 13.
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical State (20°C) : Liquid .
Form/Colour : Clear , Colourless .
Odour : Characteristic odour .
* Odour threshold : No data available.
* pH value : Neutral.
Congealing/Melting point : -86 °C
* Freezing point : No data available.
Boiling Point/Range (1013 hPa) : 79 - 81 °C
Flash point : -4 °C
Evaporation rate : 6 ( n-Butyl acetate = 1)
Fire hazard : P1
Explosion limits in air : 1,8 - 11,5 vol.%
Vapour pressure (20°C) : 105 mbar
Relative vapour density (air=1) : 2,5
Relative density of saturated vapour/air : 1,15mixture (air=1)
Relative density (water=1) : 0,8
Soluble in : Alcohol , Ether , ...
Solubility in water (20°C) : 29 g/100 ml
Log P Octanol/Water (20°C) : 0,3
Auto-ignition temperature : 404 °C
Minimum ignition energy : 0,27 mJ
* Decomposition temperature : No data available.
Viscosity (25°C) : 0,52 mPa.S
* Explosive properties : Not applicable.
Oxidizing properties : Not applicable.
9.2. Other information
* Surface tension (20°C) : 25 mN/m
Specific leading : 3,6*10E5 pS/m
Thermal expansion coefficient : 0,00129 v/v °C
% Volatiles (by weight) : 100
BRENNTAG
Page : 6MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
10. Stability and reactivity
10.1. Reactivity
See below.*
10.2. Chemical stability
Stability : Stable at normal circumstances.
10.3. Possibility of hazardous reactions
* Hazardous reactions : Possible formation of peroxides.
10.4. Conditions to avoid
Conditions to avoid : High temperatures .
10.5. Incompatible materials
Materials to avoid : Oxidizing agents .
10.6. Hazardous decomposition products
Hazardous Decomposition Products : Fire may liberate carbon oxides (CO) and smoke.
11. Toxicological information
11.1. Information on toxicological effects
Acute toxicity
- Inhalation : May cause irritation of respiratory tract.High concentrations may produce central nervous system depression and loss ofconsciousness (diminuation of consciousness).Symptoms include: Cough , Headache , Drowsiness .• Butanone : LC50 (Rat, inhalation, 4 h) : 20 mg/l
- Skin contact : May be irritating for the skin. Product is being absorbed through the skin.Symptoms include: Redness .• Butanone : LD50 (Rabbit, dermal) : > 5000 mg/kg
- Eye contact : Irritating to eyes.Symptoms include: Redness , Pain .
- Ingestion : Symptoms include: Abdominal cramps , See "Inhalation" .• Butanone : LD50 (Rat, oral) : > 2500 mg/kg
Chronic toxicity : Repeated exposure may cause skin dryness or cracking.
* Sensibilization : Not sensitive .
* Carcinogenicity : Not carcinogenic .
* Mutagenicity : Not mutagenic .
* Reproductive toxicity : Possible risk of harm to the unborn child.
12. Ecological information
12.1. Toxicity
Ecotoxicity : • Butanone : EC50 (Daphnia magna, 48 h) : > 5000 mg/l• Butanone : LC50 (Fish, 96 h) : > 2500 mg/l (Pimephales promelas)
12.2. Persistence and degradability
Persistence and degradability : • Butanone : Persistence and degradability : Easily
12.3. Bioaccumulative potential
Bioaccumulation : • Butanone : Bioaccumulation : No
BRENNTAG
Page : 7MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
12. Ecological information (continued)
12.4. Mobility in soil
Mobility : • Butanone : Mobility : Good soluble in water
12.5. Results of PBT and vPvB assessment
* Evaluation : • Butanone : PBT/vPvB : No
12.6. Other adverse effects
This product is classified as a Volatile Organic Component according to Directive 1999/13/EC.
WGK class (DE) : 1 ( Weak water pollutant )
Water damaging (NL) : 11
Decontamination exertion (NL) : B
13. Disposal considerations
13.1. Waste treatment methods
Waste from residues/Unused products : The product has to be destroyed according to national or local legislation, by acompany specialised in handling hazardous waste products.
* European list of waste products : XXXXXX - European waste product code. This code is assigned on the basis of themost current applications and can not be representative for pollutions which arearisen at the effective use of the product. The producer of the waste has toevaluate its process himself and has to grant the appropriate waste coding. SeeDecision 2001/118/EC.08XXXX - Waste from the manufacture, formulation, supply and use (MFSU) ofcoatings (paints, varnishes and vitreous enamels), adhesives, sealants and printinginks.140603 - Other solvents and mixtures of solvents.
Removal contaminated packaging : Packing is to be used exclusively for the packing of this product.After use, empty and close the packing very carefully.In case of returned packing, the empty packing can be offered back to the supplier.
14. Transport information
14.1. UN number
UN Number : 1193
14.2. UN proper shipping name
* ADR Name : UN 1193 Methyl ethyl ketone (Ethyl methyl ketone), 3, II, (D/E)
* ADN Name : UN 1193 Methyl ethyl ketone (Ethyl methyl ketone) , 3, II
IMDG Name : UN 1193 Methyl ethyl ketone (Ethyl methyl ketone) , 3, II, (-4°C)
14.3. Transport hazard classe(s)
Class : 3
14.4. Packing group
Packaging Group : II
14.5. Environmental hazards
* Environmentally hazard : No
Marine pollutant : No
14.6. Special precautions for user
BRENNTAG
Page : 8MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
14. Transport information (continued)
Danger number : 33
Hazard Label(s) : 3
EmS-N° : F-E, S-D
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
* Type ship : 3
* Pollution category : Z
15. Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Inventories : Australian inventory (AICS): Listed in inventory.Canadian inventory (DSL): Listed in inventory.Chinese inventory (IECS): Listed in inventory.European inventory (EINECS): Listed in inventory.Japanese inventory (ENCS): Listed in inventory.Korean inventory (KECI): Listed in inventory.Philippine inventory (PICCS): Listed in inventory.Inventory of the United States (TSCA): Listed in inventory.
NFPA n° : 1-3-0
* Relevant EU Rule(s) : Directive 92/85/EEC of the Council of 19 October 1992 on the introduction ofmeasures to encourage improvements in the safety and health at work of pregnantworkers and workers who have recently given birth or are breastfeedingDirective 96/82/EC of the Council of 9 December 1996 on the control of major-accident hazards involving dangerous substancesDirective 98/24/EC of the Council of 7 April 1998 on the protection of the health andsafety of workers from the risks related to chemical agents at workDirective 1999/13/EC of the Council of 11 March 1999 on the limitation ofemissions of volatile organic compounds due to the use of organic solvents incertain activities and installationsDirective 2004/42/CE of the European Parliament and of the Council of 21 April2004 on the limitation of emissions of volatile organic compounds due to the use oforganic solvents in certain paints and varnishes and vehicle refinishing productsand amending Directive 1999/13/ECDecision 2001/118/EC of the Commission of 16 January 2001 amending Decision2000/532/EC as regards the list of wastesRegulation (EC) No 1272/2008 of the European Parliament and of the Council of 16December 2008 on classification, labelling and packaging of substances andmixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, andamending Regulation (EC) No 1907/2006Regulation (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration,Evaluation, Authorisation and Restriction of Chemicals (Reach)
15.2. Chemical Safety Assessment
A chemical safety assessment has been carried out for the substance(s) that make up this material or for the material itself.*
16. Other information
This safety data sheet has been drawn up in accordance with Regulation (EU) No 453/2010.*
This safety data sheet is exclusively made for industrial/professional use.
* Has changed compared to previous revision.
BRENNTAG
Page : 9MATERIAL SAFETY DATA
Revision nr : 8
SHEETDate : 8/6/2011
Supersedes : 1/7/2008
METHYL ETHYL KETONECode : 14066
16. Other information (continued)
Changes : General revision .
* Sources of used key data : The information contained herein is based on the present state of our knowledge (Producer(s) , Chemical cards , ...).See also on the webaddress:http://apps.echa.europa.eu/registered/registered-sub.aspx#search
R-phrases : R11 - Highly flammable.R36 - Irritating to eyes.R66 - Repeated exposure may cause skin dryness or cracking.R67 - Vapours may cause drowsiness and dizziness.
* (EU)H-statements : H225 - Highly flammable liquid and vapour.H319 - Causes serious eye irritation.H336 - May cause drowsiness or dizziness.EUH066 - Repeated exposure may cause skin dryness or cracking.
* List of abbrevations and acronyms : ADN (Accord européen relatif au transport international des marchandisesDangereuses par voie de Navigation interieur) : European agreement concerningthe international carriage of dangerous goods by inland waterwaysADR (Accord européen relatif au transport international des marchandisesDangereuses par Route) : European agreement concerning the internationalcarriage of dangerous goods by roadCO : Carbon monoxideDNEL (Derived No Effect Level) : an estimated safe exposure levelEmS (Emergency Schedule) : the first code refers to the relevant fire schedule andthe second code refers to the relevant spillage scheduleIMDG (International Maritime Dangerous Goods code)NFPA (National Fire Protection Association) or fire diamantPNEC (Predicted No Effect Concentration) : concentration below which exposure toa substance is not expected to cause adverse effectsREACH : Registration, Evaluation, Authorisation and restriction of ChemicalsWGK (Wassergefahrdungsklasse) : a German classification of substances thatindicate the environmental hazard for surface water
This information is to our knowledge correct and complete on the date of issue of this safety data sheet. The information onlyconcerns the product and does not give any guarantee for the quality and the completeness of the properties of the product, or incase of mixing or using in any other process. It remains the responsibility of the user to assure himself that the information issuitable and complete concerning the special use he makes of the product.BRENNTAG denies all responsibility for loss or damage resulting from the use of these data.
End of document
BRENNTAG
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 1/84 EN
No. Short title
Main User
Group (SU)
Sector of Use (SU)
Product Category
(PC)
Process Category (PROC)
Environmental
Release Category
(ERC)
Article Category
(AC) Specified
1 Manufacture of substance
3 8, 9 NA 1, 2, 3, 4, 8a, 8b, 15
1, 4 NA ES600
2 Use as an intermediate 3 NA NA 1, 2, 3, 4, 8a, 8b, 15 6a NA ES626
3 Distribution of substance
3 8, 9 NA 1, 2, 3, 4, 8a, 8b, 9,
15 2 NA ES628
4
Formulation & (re)packing of
substances and mixtures
3 NA NA 1, 2, 3, 4, 5, 8a, 8b, 9, 14, 15
2 NA ES630
5 Polymer processing 3 10 NA
1, 2, 3, 4, 5, 6, 8a,
8b, 9, 13, 14, 21
4, 7 NA ES222
6 Uses in coatings 3 NA NA
1, 2, 3, 4, 5, 7, 8a,
8b, 9, 10, 13, 14, 15
4 NA ES632
7 Uses in coatings 22 NA NA
1, 2, 3, 4, 5, 8a, 8b,
10, 11, 13, 15, 19
8a, 8d NA ES229
8 Uses in coatings 21 NA
1, 4, 8, 9a, 9b, 15, 18, 23, 24, 31, 34
NA 8a, 8d NA ES363
9 Use in Cleaning Agents 3 NA NA
1, 2, 3, 4, 7, 8a, 8b,
10, 13 4 NA ES636
10 Use in Cleaning
Agents 22 NA NA 1, 2, 3, 4,
8a, 8b, 10, 11, 13
8a, 8b, 8d NA ES319
11 Use in Cleaning
Agents 21 NA 9a, 9b, 24, 35 NA 8a, 8d NA ES392
12 Use as binders and release agents 3 NA NA
1, 2, 3, 4, 6, 7, 8b,
10, 13, 14 4, 5 NA ES185
13 Use as binders and release agents
22 NA NA 1, 2, 3, 4, 6, 8b, 10,
11, 14 8a, 8d NA ES324
14 Use in agrochemicals 22 NA NA 1, 2, 4, 8a, 8b, 11, 13
8a, 8d NA ES322
15 Use in agrochemicals 21 NA 12, 27 NA 8a, 8d NA ES481
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 2/84 EN
16 Use as a fuel 3 NA NA 1, 2, 3,
8a, 8b, 16 7 NA ES189
17 Use as a fuel 22 NA NA 1, 2, 3, 8a, 8b, 16
8b, 8e, 9a, 9b
NA ES326
18 Use as a fuel 21 NA 13 NA 8b NA ES485
19 Use as lubricants 3 NA NA
1, 2, 3, 4, 7, 8a, 8b, 9, 10, 13,
17, 18
4, 7 NA ES177
20 Use as lubricants 21 NA 1, 24, 31 NA 8a, 8d, 9a, 9b NA ES471
21 Use as Functional Fluids
21 NA 16, 17 NA 9a, 9b NA ES489
22 Use in laboratories 3 NA NA 10, 15 2, 4 NA ES217
23 Use in laboratories 22 NA NA 10, 15 8a NA ES329
24 Use in metal working fluids / rolling oils 3 NA NA
1, 2, 3, 4, 5, 7, 8a,
8b, 9, 10, 13, 17
4 NA ES183
25 Use in de-icing and
anti-icing applications 22 NA NA 8b, 10,
11 8d NA ES357
26 Use in road and
construction applications
22 NA NA 8a, 8b, 9, 10, 11, 13 8d, 8f NA ES353
27 Use as water treatment chemicals 3 NA NA 1, 2, 3, 4,
8a, 8b, 13 3 NA ES226
28 Use as water treatment
chemicals 22 NA NA 1, 2, 3, 4, 8a, 8b, 13 8f NA ES331
29 Explosives
manufacture & use 22 NA NA 1, 2, 3, 5,
8a, 8b 8d, 8e NA ES355
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 3/84 EN
1. Short title of Exposure Scenario 1: Manufacture of substance
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Sectors of end-use SU8: Manufacture of bulk, large scale chemicals (including petroleum products) SU9: Manufacture of fine chemicals
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC15: Use as laboratory reagent
Environmental Release Categories
ERC1: Manufacture of substances ERC4: Industrial use of processing aids in processes and products, not becoming part of articles
Activity
Manufacture of substance or use as an intermediate, process chemical or extracting agent. Includes recycling/recovery, material transfers, storage, maintenance and loading (including marine vessel/barge, road/rail car and bulk container).
2.1 Contributing scenario controlling environmental exposure for: ERC1
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use)
liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Equipment cleaning and maintenance
Drain down system prior to equipment opening or maintenance.(PROC8a)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 4/84 EN
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 5/84 EN
1. Short title of Exposure Scenario 2: Use as an intermediate
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC15: Use as laboratory reagent
Environmental Release Categories
ERC6a: Industrial use resulting in manufacture of another substance (use of intermediates)
Activity
Use as an intermediate (not related to Strictly Controlled Conditions). Includes incidental exposures during recycling/recovery, material transfers, storage, sampling, associated laboratory activities, maintenance and loading (including marine vessel/barge, road/rail car and bulk container).
2.1 Contributing scenario controlling environmental exposure for: ERC6a
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Equipment cleaning and maintenance
Drain down system prior to equipment opening or maintenance.(PROC8a)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
3. Exposure estimation and reference to its source
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 6/84 EN
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 7/84 EN
1. Short title of Exposure Scenario 3: Distribution of substance
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Sectors of end-use SU8: Manufacture of bulk, large scale chemicals (including petroleum products) SU9: Manufacture of fine chemicals
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC15: Use as laboratory reagent
Environmental Release Categories
ERC2: Formulation of preparations
Activity Loading (including marine vessel/barge, rail/road car and IBC loading) and repacking (including drums and small packs) of substance, including its sampling, storage, unloading, distribution and associated laboratory activities.
2.1 Contributing scenario controlling environmental exposure for: ERC2
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC9, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use)
liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
General exposures (closed systems) Handle substance within a closed system.(PROC1)
General exposures (closed systems) Clear transfer lines prior to de-coupling.(PROC4)
Equipment cleaning and maintenance
Drain down system prior to equipment opening or maintenance.(PROC8a)
Bulk transfers Handle substance within a closed
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 8/84 EN
(closed systems) system.(PROC8b)
Drum and small package filling
Fill containers/cans at dedicated filling points supplied with local extract ventilation.(PROC9)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 9/84 EN
1. Short title of Exposure Scenario 4: Formulation & (re)packing of substances and mixtures
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelettisation PROC15: Use as laboratory reagent
Environmental Release Categories
ERC2: Formulation of preparations
Activity
Formulation, packing and re-packing of the substance and its mixtures in batch or continuous operations, including storage, materials transfers, mixing, tabletting, compression, pelletisation, extrusion, large and small scale packing, sampling, maintenance and associated laboratory activities.
2.1 Contributing scenario controlling environmental exposure for: ERC2
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC5, PROC8a, PROC8b, PROC9, PROC14, PROC15
Product characteristics
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
General exposures (closed systems)
Handle substance within a closed system.(PROC2, PROC3)
Storage Store substance within a closed system. Transfer via enclosed lines. Locate bulk storage outdoors.(PROC1, PROC2)
Provide extraction ventilation at points where emissions occur.(PROC5, PROC14) Transfer from/pouring Use drum pumps or carefully pour from
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 10/84 EN
from containers Manual
container.(PROC8a, PROC8b)
Drum/batch transfers Drain down and flush system prior to equipment opening or maintenance.(PROC8a)
Drum and small package filling
Fill containers/cans at dedicated filling points supplied with local extract ventilation.(PROC9)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands. Wear a respirator conforming to EN140 with Type A filter or better.(PROC5, PROC14)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 11/84 EN
1. Short title of Exposure Scenario 5: Polymer processing
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Sectors of end-use SU 10: Formulation [mixing] of preparations and/ or re-packaging (excluding alloys)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC6: Calendering operations PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC13: Treatment of articles by dipping and pouring PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelettisation PROC21: Low energy manipulation of substances bound in materials and/or articles
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles ERC7: Industrial use of substances in closed systems
Activity Processing of formulated polymers including material transfers, additives handling (e.g. pigments, stabilisers, fillers, plasticisers, etc.), moulding, curing and forming activities, material re-works, storage and associated maintenance.
2.1 Contributing scenario controlling environmental exposure for: ERC4, ERC7
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC5, PROC6, PROC8a, PROC8b, PROC9, PROC13, PROC14, PROC21
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use)
liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 12/84 EN
Other operational conditions affecting workers exposure
Operation is carried out at elevated temperature (> 20°C above ambient temperature).(PROC6)
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC2)
Additive premixing Ensure material transfers are under containment or extract ventilation.(PROC3, PROC4, PROC5)
Additive premixing Avoid carrying out operation for more than 4 hours.(PROC5)
Calendering (including Banburys)
Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC6)
Equipment maintenance Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC8a)
Bulk transfers Handle substance within a closed system. Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC9)
Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC13, PROC14, PROC21)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 13/84 EN
1. Short title of Exposure Scenario 6: Uses in coatings
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC7: Industrial spraying PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10: Roller application or brushing PROC13: Treatment of articles by dipping and pouring PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelettisation PROC15: Use as laboratory reagent
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles
Activity
Covers the use in coatings (paints, inks, adhesives, etc) including exposures during use (including materials receipt, storage, preparation and transfer from bulk and semi-bulk, application by spray, roller, spreader, dip, flow, fluidised bed on production lines and film formation) and equipment cleaning, maintenance and associated laboratory activities.
2.1 Contributing scenario controlling environmental exposure for: ERC4
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC5, PROC7, PROC8a, PROC8b, PROC9, PROC10, PROC13, PROC14, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 14/84 EN
Technical conditions and measures to control dispersion from source towards the worker
General exposures (closed systems)
Handle substance within a closed system.(PROC1, PROC2, PROC3)
Ensure material transfers are under containment or extract ventilation.(PROC2, PROC3) Provide extraction ventilation at points where emissions occur.(PROC4, PROC5, PROC13, PROC14, PROC15) Spraying (automatic/robotic)
Carry out in a vented booth provided with laminar airflow.(PROC7)
Spraying/fogging by manual application
Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC7)
Clear transfer lines prior to de-coupling.(PROC8a, PROC8b) Material transfers Drum/batch transfers Transfer from/pouring from containers
Provide extract ventilation to material transfer points and other openings.(PROC9)
Roller, spreader, flow application
Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC10)
Production of preparations or articles by tabletting, compression, extrusion, pelettisation
Avoid manual contact with wet work pieces.(PROC13)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands. Spraying/fogging by manual application
Wear a respirator conforming to EN140 with Type A filter or better.(PROC7)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 15/84 EN
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 16/84 EN
1. Short title of Exposure Scenario 7: Uses in coatings
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC11: Non industrial spraying PROC13: Treatment of articles by dipping and pouring PROC15: Use as laboratory reagent PROC19: Hand-mixing with intimate contact and only PPE available
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity
Covers the use in coatings (paints, inks, adhesives, etc) including exposures during use (including materials receipt, storage, preparation and transfer from bulk and semi-bulk, application by spray, roller, brush, spreader by hand or similar methods, and film formation) and equipment cleaning, maintenance and associated laboratory activities.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC5, PROC8a, PROC8b, PROC10, PROC11, PROC13, PROC15, PROC19
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Other operational conditions affecting workers exposure
Avoid carrying out operation for more than 4 hours.
Technical conditions and measures to control dispersion from source towards the worker
General exposures (closed systems)
Handle substance within a closed system.(PROC1, PROC2)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 17/84 EN
Filling / preparation of equipment from drums or containers
Filling / preparation of equipment from drums or containers
Ensure material transfers are under containment or extract ventilation.(PROC2)
Preparation of material for application
Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC3)
Film formation - air drying Indoor
Provide extraction ventilation at points where emissions occur. Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC4)
Preparation of material for application Indoor
Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC5)
Drum/batch transfers
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC8a)
Material transfers Drum/batch transfers
Provide extract ventilation to material transfer points and other openings.(PROC8b)
Roller, spreader, flow application Indoor
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC10)
Spraying/fogging by manual application Indoor
Carry out in a vented booth or extracted enclosure.(PROC11)
Dipping, immersion and pouring Indoor
Provide extraction ventilation at points where emissions occur. Avoid manual contact with wet work pieces.(PROC13)
Dipping, immersion and pouring Outdoor.
Ensure operation is undertaken outdoors. Avoid manual contact with wet work pieces.(PROC13)
Laboratory activities Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC15)
Hand application - finger paints, pastels, Adhesives Indoor
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC19)
Hand application - finger paints, pastels, Adhesives Outdoor.
Ensure operation is undertaken outdoors.(PROC19)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 18/84 EN
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
Film formation - air drying Outdoor.
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC4)
Preparation of material for application Indoor
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC5)
Drum/batch transfers
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC8a)
Spraying/fogging by manual application Outdoor.
Avoid carrying out operation for more than 4 hours.(PROC11)
Preparation of material for application
Wear a respirator conforming to EN140 with Type A filter or better.(PROC5, PROC10, PROC11, PROC19)
Spraying/fogging by manual application Hand application - finger paints, pastels, Adhesives Outdoor.
Wear a respirator conforming to EN140 with Type A filter or better.(PROC11, PROC19)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 19/84 EN
1. Short title of Exposure Scenario 8: Uses in coatings
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category
PC1: Adhesives, sealants PC4: Anti-freeze and de-icing products PC8: Biocidal products PC9a: Coatings and paints, thinners, paint removers PC9b: Fillers, putties, plasters, modelling clay PC15: Non-metal-surface treatment products PC18: Ink and toners PC23: Leather tanning, dye, finishing, impregnation and care products PC24: Lubricants, greases, release products PC31: Polishes and wax blends PC34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Covers the use in coatings (paints, inks, adhesives, etc) including exposures during use (including product transfer and preparation, application by brush, spray by hand or similar methods) and equipment cleaning.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC1: Glues, hobby use
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 30%
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Amount used Amount used per event 9 g
Frequency and duration of use Exposure duration per day
4 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 20/84 EN
2.3 Contributing scenario controlling consumer exposure for: PC1: Glues DIY-use (carpet glue, tile glue, wood parquet glue)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 30%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 6,390 kg
Frequency and duration of use Exposure duration per day
6 h
Frequency of use 1 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 110 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.5 Contributing scenario controlling consumer exposure for: PC1: Glue from spray
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 30%
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Amount used Amount used per event 85,05 g
Frequency and duration of use Exposure duration per day
4 h
Frequency of use 6 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 21/84 EN
2.6 Contributing scenario controlling consumer exposure for: PC1: Sealants
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 20 %.
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 75 g
Frequency and duration of use Exposure duration per day
1 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.7 Contributing scenario controlling consumer exposure for: PC4: Washing car window
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 1 %.
Physical Form (at time of use)
liquid
Vapour pressure > 10 kPa
Amount used Amount used per event 0,5 g
Frequency and duration of use Exposure duration per day
0,02 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 22/84 EN
2.8 Contributing scenario controlling consumer exposure for: PC4: Pouring into radiator
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 10%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 2 kg
Frequency and duration of use Exposure duration per day
0,17 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.9 Contributing scenario controlling consumer exposure for: PC8: Cleaners, liquids
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 5 %.
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 27 g
Frequency and duration of use Exposure duration per day
0,33 h
Frequency of use 128 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 23/84 EN
2.10 Contributing scenario controlling consumer exposure for: PC8: Cleaners, trigger sprays
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 15%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 35 g
Frequency and duration of use Exposure duration per day
0,17 h
Frequency of use 128 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.11 Contributing scenario controlling consumer exposure for: PC9a: Solvent rich, high solid, water borne paint
Product characteristics
Concentration of the Substance in Mixture/Article
Covers the percentage of the substance in the product up to 25 %.
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,744 kg
Frequency and duration of use Exposure duration per day
2,2 h
Frequency of use 6 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 24/84 EN
2.12 Contributing scenario controlling consumer exposure for: PC9a: Aerosol spray can
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,215 kg
Frequency and duration of use Exposure duration per day
0,33 h
Frequency of use 2 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.13 Contributing scenario controlling consumer exposure for: PC9a: Removers (paint-, glue-, wall paper-, sealant-remover)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,491 kg
Frequency and duration of use Exposure duration per day
2 h
Frequency of use 3 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 25/84 EN
2.15 Contributing scenario controlling consumer exposure for: PC9b: Fillers and putty
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 2%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 85 g
Frequency and duration of use Exposure duration per day
4 h
Frequency of use 12 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.16 Contributing scenario controlling consumer exposure for: PC9b: Plasters and floor equalizers
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 2%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 13,8 kg
Frequency and duration of use Exposure duration per day
2 h
Frequency of use 12 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 26/84 EN
2.17 Contributing scenario controlling consumer exposure for: PC15: Solvent rich, high solid, water borne paint
Product characteristics
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,744 kg
Frequency and duration of use Exposure duration per day
2,2 h
Frequency of use 6 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.18 Contributing scenario controlling consumer exposure for: PC15: Aerosol spray can
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,215 kg
Frequency and duration of use Exposure duration per day
0,33 h
Frequency of use 2 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.19 Contributing scenario controlling consumer exposure for: PC15: Removers (paint-, glue-, wall paper-, sealant remover)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 27/84 EN
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,491 kg
Frequency and duration of use Exposure duration per day
2 h
Frequency of use 3 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.20 Contributing scenario controlling consumer exposure for: PC18
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 10%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 40 g
Frequency and duration of use Exposure duration per day
2,2 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 71,4 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.21 Contributing scenario controlling consumer exposure for: PC23: Polishes, wax/cream (floor, furniture, shoes)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 28/84 EN
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 56 g
Frequency and duration of use Exposure duration per day
1,23 h
Frequency of use 29 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.22 Contributing scenario controlling consumer exposure for: PC23: Polishes, spray (furniture, shoes)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 56 g
Frequency and duration of use Exposure duration per day
0,33 h
Frequency of use 8 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.23 Contributing scenario controlling consumer exposure for: PC24: Liquids
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 29/84 EN
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 2,2 kg
Frequency and duration of use Exposure duration per day
0,17 h
Frequency of use 4 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.24 Contributing scenario controlling consumer exposure for: PC24: Pastes
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 20%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 34 g
Frequency and duration of use Exposure duration per day
6 h
Frequency of use 10 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.25 Contributing scenario controlling consumer exposure for: PC24: Sprays Product characteristics Concentration of the Concentration of substance in product : 0% - 50%
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 30/84 EN
Substance in Mixture/Article
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 73 g
Frequency and duration of use Exposure duration per day
0,17 h
Frequency of use 6 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.26 Contributing scenario controlling consumer exposure for: PC31: Polishes, wax / cream (floor, furniture, shoes)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 142 g
Frequency and duration of use Exposure duration per day
1,23 h
Frequency of use 29 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.27 Contributing scenario controlling consumer exposure for: PC31: Polishes, spray (furniture,
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 31/84 EN
shoes)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 35 g
Frequency and duration of use Exposure duration per day
0,33 h
Frequency of use 8 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.28 Contributing scenario controlling consumer exposure for: PC34
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 10%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,115 kg
Frequency and duration of use Exposure duration per day
1 h
Frequency of use 365 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 32/84 EN
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Consumers
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 33/84 EN
1. Short title of Exposure Scenario 9: Use in Cleaning Agents
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC7: Industrial spraying PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles
Activity
Covers the use as a component of cleaning products including transfer from storage, pouring/unloading from drums or containers. exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping, automated and by hand), related equipment cleaning and maintenance.
2.1 Contributing scenario controlling environmental exposure for: ERC4
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC7, PROC8a, PROC8b, PROC10, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Filling / preparation of equipment from drums or containers
Ensure material transfers are under containment or extract ventilation.(PROC8b)
Provide extraction ventilation at points where emissions occur.(PROC4, PROC13) Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC7, PROC10)
Conditions and measures related Use suitable eye protection.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 34/84 EN
to personal protection, hygiene and health evaluation
Avoid direct eye contact with product, also via contamination on hands. Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC2) Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC3, PROC7, PROC10) Wear a respirator conforming to EN140 with Type A filter or better.(PROC7, PROC10)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 35/84 EN
1. Short title of Exposure Scenario 10: Use in Cleaning Agents
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC11: Non industrial spraying PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8b: Wide dispersive indoor use of reactive substances in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity
Covers the use as a component of cleaning products including pouring/unloading from drums or containers; and exposures during mixing/diluting in the preparatory phase and cleaning activities (including spraying, brushing, dipping, wiping, automated and by hand).
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8b, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC10, PROC11, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Surfaces cleaning Manual
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC10)
Semi-automated process (e.g.: Semi-automatic application of floor care and maintenance
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC4)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 36/84 EN
products)
Cleaning of medical devices
Provide extraction ventilation at points where emissions occur.(PROC4)
Filling / preparation of equipment from drums or containers
Ensure operation is undertaken outdoors.(PROC8a)
Filling / preparation of equipment from drums or containers
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC8b)
Cleaning with low-pressure washers Rolling, Brushing
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC10)
Surfaces cleaning Manual
Ensure doors and windows are opened.(PROC10)
Ad hoc manual application via trigger sprays, dipping, etc
Provide extraction ventilation at points where emissions occur.(PROC10)
Cleaning with high pressure washers Spraying Indoor
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied or removed by a powered fan.(PROC11)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
Surfaces cleaning Manual
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC10)
Automated process with (semi) closed systems
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC2, PROC3)
Semi-automated process (e.g.: Semi-automatic application of floor care and maintenance products)
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC4)
Application of cleaning products in closed systems
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC4)
Cleaning of medical devices
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 37/84 EN
filter or better.(PROC4)
Filling / preparation of equipment from drums or containers
Wear a respirator conforming to EN140 with Type A filter or better.(PROC8a)
Filling / preparation of equipment from drums or containers
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC8b)
Surfaces cleaning Manual
Avoid carrying out operation for more than 1 hour. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC10)
Ad hoc manual application via trigger sprays, dipping, etc
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC10)
Cleaning with high pressure washers Spraying Outdoor.
Avoid carrying out operation for more than 4 hours. or Wear a respirator conforming to EN140 with Type A filter or better.(PROC11)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 38/84 EN
1. Short title of Exposure Scenario 11: Use in Cleaning Agents
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category
PC9a: Coatings and paints, thinners, paint removers PC9b: Fillers, putties, plasters, modelling clay PC24: Lubricants, greases, release products PC35: Washing and cleaning products (including solvent based products)
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Covers general exposures to consumers arising from the use of household products sold as washing and cleaning products, aerosols, coatings, de-icers, lubricants and air care products.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC9a: Solvent rich, high solid, water borne paint
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 25 %.
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,744 kg
Frequency and duration of use
Exposure duration per event
2 h
Frequency of use 6 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.3 Contributing scenario controlling consumer exposure for: PC9a: Aerosol spray can
Product characteristics Concentration of the Substance in Mixture/Article
Covers concentrations up to 50%
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 39/84 EN
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,215 kg
Frequency and duration of use
Exposure duration per event
0,33 h
Frequency of use 2 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.4 Contributing scenario controlling consumer exposure for: PC9a: Removers (paint-, glue-, wall paper-, sealant-remover)
Product characteristics
Concentration of the Substance in Mixture/Article
Covers concentrations up to 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 0,491 kg
Frequency and duration of use
Exposure duration per event
2 h
Frequency of use 3 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.5 Contributing scenario controlling consumer exposure for: PC9b
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 40/84 EN
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 2%
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 13,8 kg
Frequency and duration of use
Exposure duration per event
2 h
Frequency of use 12 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.6 Contributing scenario controlling consumer exposure for: PC24: Liquids
Product characteristics
Concentration of the Substance in Mixture/Article
Covers concentrations up to 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 2,2 kg
Frequency and duration of use
Exposure duration per event
0,17 h
Frequency of use 4 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 41/84 EN
2.7 Contributing scenario controlling consumer exposure for: PC24: Pastes
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 20 %.
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 34 g
Frequency and duration of use
Exposure duration per event
2,2 h
Frequency of use 10 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.8 Contributing scenario controlling consumer exposure for: PC24: Sprays
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 20%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 73 g
Frequency and duration of use
Exposure duration per event
0,17 min
Frequency of use 6 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 42/84 EN
protection and hygiene)
2.9 Contributing scenario controlling consumer exposure for: PC35: Cleaners, liquids (all purpose cleaners, sanitary products, floor cleaners, glass cleaners, carpet cleaners, metal cleaners )
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 5%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 27 g
Frequency and duration of use
Exposure duration per event
0,33 min
Frequency of use 128 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.10 Contributing scenario controlling consumer exposure for: PC35: Cleaners, trigger sprays (all purpose cleaners, sanitary products, glass cleaners)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 15%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 35 g
Frequency and duration of use
Exposure duration per event
0,17 min
Frequency of use 128 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 43/84 EN
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Consumers
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels. Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 44/84 EN
1. Short title of Exposure Scenario 12: Use as binders and release agents
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC6: Calendering operations PROC7: Industrial spraying PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC13: Treatment of articles by dipping and pouring PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelettisation
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles ERC5: Industrial use resulting in inclusion into or onto a matrix
Activity Covers the use as binders and release agents including material transfers, mixing, application (including spraying and brushing) and handling of waste.
2.1 Contributing scenario controlling environmental exposure for: ERC4, ERC5
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC6, PROC7, PROC8b, PROC10, PROC13, PROC14
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Other operational conditions affecting workers exposure
Operation is carried out at elevated temperature (> 20°C above ambient temperature).(PROC6)
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Material transfers Provide a good standard of controlled ventilation (10 to 15 air changes per hour) Transfer via enclosed lines.(PROC1, PROC2,
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 45/84 EN
PROC3)
Mixing operations (closed systems)
Provide a good standard of controlled ventilation (10 to 15 air changes per hour) Handle substance within a closed system.(PROC3)
Casting operations Provide extraction ventilation at points where emissions occur.(PROC6)
Spraying (automatic/robotic)
Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC7)
Spraying/fogging by manual application
Carry out in a vented booth or extracted enclosure.(PROC7)
Drum/batch transfers Transfer materials directly to mixing vessels.(PROC8b)
Provide extraction ventilation at points where emissions occur.(PROC10, PROC14)
Conditions and measures related to personal protection, hygiene and health evaluation
Casting operations Wear a respirator conforming to EN140 with Type A filter or better.(PROC6)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 46/84 EN
1. Short title of Exposure Scenario 13: Use as binders and release agents
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC6: Calendering operations PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC11: Non industrial spraying PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelettisation
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Covers the use as binders and release agents including material transfers, mixing, application by spraying, brushing, and handling of waste.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC6, PROC8b, PROC10, PROC11, PROC14
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Other operational conditions affecting workers exposure
Operation is carried out at elevated temperature (> 20°C above ambient temperature).(PROC6)
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Transfer via enclosed lines.(PROC1, PROC2, PROC3) Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC3, PROC10, PROC14) Mixing operations (open systems) Handle substance within a closed system.(PROC4)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 47/84 EN
Casting operations Provide extraction ventilation at points where emissions occur.(PROC6)
Use drum pumps.(PROC8b) Minimise exposure by extracted full enclosure for the operation or equipment.(PROC11)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 48/84 EN
1. Short title of Exposure Scenario 14: Use in agrochemicals
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC11: Non industrial spraying PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Use as an agrochemical excipient for application by manual or machine spraying, smokes and fogging; including equipment clean-downs and disposal.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC4, PROC8a, PROC8b, PROC11, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Mixing operations (open systems) Transfer from/pouring from containers Ad hoc manual application via trigger sprays, dipping, etc
Ensure operation is undertaken outdoors.(PROC4, PROC8b, PROC13)
Disposal of wastes Ensure operation is undertaken outdoors.(PROC8a)
Spraying (automatic/robotic)
Apply within a vented cab supplied with filtered air under positive pressure and with a protection factor of >20.(PROC11)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 49/84 EN
Organisational measures to prevent /limit releases, dispersion and exposure
Disposal of wastes Avoid carrying out operation for more than 1 hour.(PROC8a)
Equipment cleaning and maintenance
Avoid carrying out operation for more than 1 hour.(PROC8a)
Conditions and measures related to personal protection, hygiene and health evaluation
Disposal of wastes Wear suitable gloves tested to EN374.(PROC8a)
Equipment cleaning and maintenance
Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.(PROC8a)
Spraying/fogging by machine application
Wear a respirator conforming to EN140 with Type A filter or better.(PROC11)
Ad hoc manual application via trigger sprays, dipping, etc
Wear suitable gloves tested to EN374. Wear a respirator conforming to EN140 with Type A filter or better.(PROC13)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 50/84 EN
1. Short title of Exposure Scenario 15: Use in agrochemicals
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category PC12: Lawn and garden preparations, including fertilizers (- Fertilizers) PC27: Plant protection products
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Covers the consumer use of agrochemicals in liquid and solid forms.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC12, PC27
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 5%
Physical Form (at time of use) liquid
Amount used Amount used per event 50 g
Frequency and duration of use
Exposure duration per event
0,5 h
Frequency of use 365 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 857,5 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation., Covers use at ambient temperatures.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
Consumer Measures Avoid using at a product concentration greater than 2.5%(PC27 )
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Consumers
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 51/84 EN
Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 52/84 EN
1. Short title of Exposure Scenario 16: Use as a fuel
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC16: Using material as fuel sources, limited exposure to unburned product to be expected
Environmental Release Categories
ERC7: Industrial use of substances in closed systems
Activity Covers the use as a fuel (or fuel additive), and includes activities associated with its transfer, use, equipment maintenance and handling of waste.
2.1 Contributing scenario controlling environmental exposure for: ERC7
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC8a, PROC8b, PROC16
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Store substance within a closed system. Transfer via enclosed lines. Ensure operation is undertaken outdoors.(PROC1, PROC2) Handle substance within a closed system.(PROC1, PROC2, PROC3, PROC16) Drain down and flush system prior to equipment opening or maintenance. Apply vessel entry procedures including use of supplied compressed air.(PROC8a)
Bulk transfers Handle substance within a closed system. Clear transfer lines prior to de-coupling.(PROC8b)
Drum/batch transfers Use drum pumps or carefully pour from container.(PROC8b)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 53/84 EN
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 54/84 EN
1. Short title of Exposure Scenario 17: Use as a fuel
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC16: Using material as fuel sources, limited exposure to unburned product to be expected
Environmental Release Categories
ERC8b: Wide dispersive indoor use of reactive substances in open systems ERC8e: Wide dispersive outdoor use of reactive substances in open systems ERC9a: Wide dispersive indoor use of substances in closed systems ERC9b: Wide dispersive outdoor use of substances in closed systems
Activity Covers the use as a fuel (or fuel additive), and includes activities associated with its transfer, use, equipment maintenance and handling of waste.
2.1 Contributing scenario controlling environmental exposure for: ERC8b, ERC8e, ERC9a, ERC9b
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC8a, PROC8b, PROC16
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Handle substance within a closed system.(PROC1, PROC2, PROC3, PROC16) Drain down and flush system prior to equipment opening or maintenance. Retain drain downs in sealed storage pending disposal or for subsequent recycle.(PROC8a) Vessel and container cleaning
Apply vessel entry procedures including use of supplied compressed air.(PROC8a)
Bulk transfers Handle substance within a closed system. Clear transfer lines prior to de-coupling.(PROC8b)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 55/84 EN
Drum/batch transfers Use drum pumps or carefully pour from container.(PROC8b)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 56/84 EN
1. Short title of Exposure Scenario 18: Use as a fuel
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category PC13: Fuels
Environmental Release Categories
ERC8b: Wide dispersive indoor use of reactive substances in open systems
Activity Covers consumer uses in liquid fuels.
2.1 Contributing scenario controlling environmental exposure for: ERC8b
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC13: Liquid: Automotive Refuelling, PC13: Liquid: Scooter Refuelling
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Amount used Amount used per event 37,5 kg (PC13)
Amount used per event 3,75 kg (PC13)
Frequency and duration of use
Exposure duration per event
0,05 h(PC13)
Exposure duration per event
0,03 h(PC13)
Frequency of use 52 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 210 cm²
Other given operational conditions affecting consumers exposure
Room size 100 m3
Ventilation rate per hour 0,6
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.3 Contributing scenario controlling consumer exposure for: PC13: Liquid: Garden Equipment - Use, PC13: Liquid: Garden Equipment - Refueling
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 57/84 EN
Amount used Amount used per event 0,750 kg
Frequency and duration of use
Exposure duration per event
2 h(PC13)
Exposure duration per event
0,03 h(PC13)
Frequency of use 26 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 420 cm²
Other given operational conditions affecting consumers exposure
Room size 100 m3(PC13)
Ventilation rate per hour 0,6(PC13)
Covers use under typical household ventilation.(PC13)
Room size 34 m3(PC13)
Ventilation rate per hour 1,5(PC13)
Covers use in a one car garage (34 m3) under typical ventilation.(PC13)
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.4 Contributing scenario controlling consumer exposure for: PC13: Liquid: Lamp oil
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Amount used Amount used per event 0,100 kg
Frequency and duration of use
Exposure duration per event
0,01 h
Frequency of use 1 Times per day
Frequency of use 52 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 210 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
3. Exposure estimation and reference to its source
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 58/84 EN
Environment
No exposure assessment presented for the environment.
Consumers
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 59/84 EN
1. Short title of Exposure Scenario 19: Use as lubricants
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC7: Industrial spraying PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10: Roller application or brushing PROC13: Treatment of articles by dipping and pouring PROC17: Lubrication at high energy conditions and in partly open process PROC18: Greasing at high energy conditions
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles ERC7: Industrial use of substances in closed systems
Activity Covers the use of formulated lubricants in closed and open systems including transfer operations, operation of machinery/engines and similar articles, reworking on reject articles, equipment maintenance and disposal of wastes.
2.1 Contributing scenario controlling environmental exposure for: ERC4, ERC7
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC7, PROC8a, PROC8b, PROC9, PROC10, PROC13, PROC17, PROC18
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Other operational conditions affecting workers exposure
Operation is carried out at elevated temperature (> 20°C above ambient temperature).(PROC8b)
Technical conditions and measures to control dispersion
Handle substance within a closed system.(PROC1, PROC2, PROC3) Spraying Minimise exposure by partial enclosure of the
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 60/84 EN
from source towards the worker operation or equipment and provide extract ventilation at openings.(PROC7)
Maintenance of small items
Avoid carrying out operation for more than 4 hours.(PROC8a)
Filling / preparation of equipment from drums or containers
Transfer via enclosed lines. Use drum pumps or carefully pour from container.(PROC8a, PROC8b)
Maintenance (of larger plant items) and machine set up
Clear lines prior to de-coupling. Provide extract ventilation to emission points when contact with warm (>50oC) product is likely.(PROC8b)
Remanufacture of reject articles
Avoid carrying out operation for more than 4 hours.(PROC9)
Ensure material transfers are under containment or extract ventilation.(PROC9) Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC10) Restrict area of openings to equipment.(PROC13, PROC17, PROC18)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands. Maintenance (of larger plant items) and machine set up
Wear suitable gloves tested to EN374.(PROC8b)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 61/84 EN
1. Short title of Exposure Scenario 20: Use as lubricants
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category PC1: Adhesives, sealants PC24: Lubricants, greases, release products PC31: Polishes and wax blends
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems ERC8d: Wide dispersive outdoor use of processing aids in open systems ERC9a: Wide dispersive indoor use of substances in closed systems ERC9b: Wide dispersive outdoor use of substances in closed systems
Activity Covers the consumer use of formulated lubricants in closed and open systems including transfer operations, application, operation of engines and similar articles, equipment maintenance and disposal of waste oil.
2.1 Contributing scenario controlling environmental exposure for: ERC8a, ERC8d, ERC9a, ERC9b
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC1: Glues, hobby use
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 30%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 9 g
Frequency and duration of use
Exposure duration per event
4 h
Frequency of use 365 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.3 Contributing scenario controlling consumer exposure for: PC1: Glues DIY-use (carpet glue, tile glue, wood parquet glue)
Product characteristics Concentration of the Substance in Concentration of substance in product : 0% - 30%
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 62/84 EN
Mixture/Article
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 6,390 kg
Frequency and duration of use
Exposure duration per event
6 h
Frequency of use 1 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 110 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.4 Contributing scenario controlling consumer exposure for: PC1: Glue from spray
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 30%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 85,05 g
Frequency and duration of use
Exposure duration per event
4 h
Frequency of use 6 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.5 Contributing scenario controlling consumer exposure for: PC1: Sealants
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 63/84 EN
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 25 %.
Physical Form (at time of use)
liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 75 g
Frequency and duration of use
Exposure duration per event
1 h
Frequency of use 365 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 35,73 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
Consumer Measures Avoid using at a product concentration greater than ....
2.6 Contributing scenario controlling consumer exposure for: PC24: Liquids
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 2,2 kg
Frequency and duration of use
Exposure duration per event
0,17 h
Frequency of use 4 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 64/84 EN
2.7 Contributing scenario controlling consumer exposure for: PC24: Pastes
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 20%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 34 g
Frequency and duration of use
Exposure duration per event
6 h
Frequency of use 10 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.8 Contributing scenario controlling consumer exposure for: PC24: Sprays
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 73 g
Frequency and duration of use
Exposure duration per event
0,17 h
Frequency of use 6 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 428,75 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal
No specific risk management measure identified beyond those operational conditions stated.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 65/84 EN
protection and hygiene)
2.9 Contributing scenario controlling consumer exposure for: PC31: Polishes, wax / cream (floor, furniture, shoes)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 142 g
Frequency and duration of use
Exposure duration per event
1,23 h
Frequency of use 29 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
2.10 Contributing scenario controlling consumer exposure for: PC31: Polishes, spray (furniture, shoes)
Product characteristics
Concentration of the Substance in Mixture/Article
Concentration of substance in product : 0% - 50%
Physical Form (at time of use) liquid
Vapour pressure > 10 Pa
Amount used Amount used per event 35 g
Frequency and duration of use
Exposure duration per event
0,33 h
Frequency of use 8 days/year
Frequency of use 1 Times per day
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 430 cm²
Other given operational conditions affecting consumers exposure
Room size 20 m3
Ventilation rate per hour 0,6
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 66/84 EN
Covers use under typical household ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Consumers
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels. Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 67/84 EN
1. Short title of Exposure Scenario 21: Use as Functional Fluids
Main User Groups SU 21: Consumer uses: Private households (= general public = consumers)
Chemical product category PC16: Heat transfer fluids PC17: Hydraulic fluids
Environmental Release Categories
ERC9a: Wide dispersive indoor use of substances in closed systems ERC9b: Wide dispersive outdoor use of substances in closed systems
Activity Use of sealed items containing functional fluids e.g. transfer oils, hydraulic fluids, refrigerants.
2.1 Contributing scenario controlling environmental exposure for: ERC9a, ERC9b
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling consumer exposure for: PC16, PC17
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use)
liquid
Amount used Amount used per event 2,2 kg
Frequency and duration of use
Exposure duration per event
0,17 h
Frequency of use 1 Times per day
Frequency of use 4 days/year
Human factors not influenced by risk management
Exposed skin areas Covers skin contact area up to 468 cm²
Other given operational conditions affecting consumers exposure
Room size 34 m3
Ventilation rate per hour 1,5
Covers use at ambient temperatures., Covers use in a one car garage (34 m3) under typical ventilation.
Conditions and measures related to protection of consumer (e.g. behavioural advice, personal protection and hygiene)
No specific risk management measure identified beyond those operational conditions stated.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Consumers
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 68/84 EN
The ECETOC TRA tool has been used to estimate consumer exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels. Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 69/84 EN
1. Short title of Exposure Scenario 22: Use in laboratories
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories PROC10: Roller application or brushing PROC15: Use as laboratory reagent
Environmental Release Categories
ERC2: Formulation of preparations ERC4: Industrial use of processing aids in processes and products, not becoming part of articles
Activity Use of the substance within laboratory settings, including material transfers and equipment cleaning..
2.1 Contributing scenario controlling environmental exposure for: ERC2, ERC4
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC10, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
cleaning Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC10)
Organisational measures to prevent /limit releases, dispersion and exposure
Ensure the ventilation system is regularly maintained and tested.
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 70/84 EN
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 71/84 EN
1. Short title of Exposure Scenario 23: Use in laboratories
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories PROC10: Roller application or brushing PROC15: Use as laboratory reagent
Environmental Release Categories
ERC8a: Wide dispersive indoor use of processing aids in open systems
Activity Use of small quantities within laboratory settings, including material transfers and equipment cleaning.
2.1 Contributing scenario controlling environmental exposure for: ERC8a
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC10, PROC15
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
cleaning Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC10)
Organisational measures to prevent /limit releases, dispersion and exposure
Ensure the ventilation system is regularly maintained and tested.
cleaning Avoid carrying out operation for more than 1 hour.(PROC10)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 72/84 EN
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 73/84 EN
1. Short title of Exposure Scenario 24: Use in metal working fluids / rolling oils
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC7: Industrial spraying PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10: Roller application or brushing PROC13: Treatment of articles by dipping and pouring PROC17: Lubrication at high energy conditions and in partly open process
Environmental Release Categories
ERC4: Industrial use of processing aids in processes and products, not becoming part of articles
Activity
Covers the use in formulated MWFs (MWFs)/rolling oils including transfer operations, rolling and annealing activities, cutting/machining activities, automated and manual application of corrosion protections (including brushing, dipping and spraying), equipment maintenance, draining and disposal of waste oils.
2.1 Contributing scenario controlling environmental exposure for: ERC4
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC5, PROC7, PROC8a, PROC8b, PROC9, PROC10, PROC13, PROC17
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Handle substance within a closed system.(PROC1, PROC2, PROC3) Filling / preparation of equipment from drums or containers
Use drum pumps or carefully pour from container.(PROC5, PROC8b, PROC9)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 74/84 EN
Spraying Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC7)
Bulk transfers
Provide enhanced general ventilation by mechanical means. or Ensure operation is undertaken outdoors. Clear transfer lines prior to de-coupling.(PROC8b)
Process sampling Use dedicated equipment.(PROC8b) Provide enhanced general ventilation by mechanical means.(PROC10, PROC13)
Metal machining operations
Provide extraction ventilation at points where emissions occur. Restrict area of openings to equipment.(PROC17)
Semi-automated metal rolling/forming
Minimise exposure by partial enclosure of the operation or equipment and provide extract ventilation at openings.(PROC17)
Organisational measures to prevent /limit releases, dispersion and exposure
Bulk transfers Avoid carrying out operation for more than 1 hour.(PROC8b)
Conditions and measures related to personal protection, hygiene and health evaluation
Use suitable eye protection. Avoid direct eye contact with product, also via contamination on hands.
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 75/84 EN
1. Short title of Exposure Scenario 25: Use in de-icing and anti-icing applications
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC10: Roller application or brushing PROC11: Non industrial spraying
Environmental Release Categories
ERC8d: Wide dispersive outdoor use of processing aids in open systems
Activity Ice prevention and de-icing of vehicles, aircraft and other equipment by spraying.
2.1 Contributing scenario controlling environmental exposure for: ERC8d
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC8b, PROC10, PROC11
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use
Covers daily exposures up to 8 hours (unless stated differently).
Application duration < 4 h(PROC10)
Frequency of use hours/day(PROC10)
Application duration < 1 h(PROC8b, PROC11)
Frequency of use hours/day(PROC8b, PROC11)
Other operational conditions affecting workers exposure
Operation is carried out at elevated temperature (> 20°C above ambient temperature).(PROC11)
Limit the substance content in the mixture to 1 %.(PROC10)
Limit the substance content in the mixture to 5 %.(PROC11)
Technical conditions and measures to control dispersion from source towards the worker
Ensure operation is undertaken outdoors.(PROC8b, PROC11)
Conditions and measures related to personal protection, hygiene and health evaluation
Wear suitable gloves tested to EN374.(PROC8b, PROC10, PROC11)
3. Exposure estimation and reference to its source
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 76/84 EN
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 77/84 EN
1. Short title of Exposure Scenario 26: Use in road and construction applications
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) PROC10: Roller application or brushing PROC11: Non industrial spraying PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC8d: Wide dispersive outdoor use of processing aids in open systems ERC8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix
Activity Loading (including marine vessel/barge, rail/road car and IBC loading) and repacking (including drums and small packs) of substance, including its sampling, storage, unloading, distribution and associated laboratory activities.
2.1 Contributing scenario controlling environmental exposure for: ERC8d, ERC8f
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC8a, PROC8b, PROC9, PROC10, PROC11, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Equipment cleaning and maintenance
Ensure operation is undertaken outdoors. Retain drain downs in sealed storage pending disposal or for subsequent recycle.(PROC8a)
Drum/batch transfers Dedicated facility
Use dedicated equipment. Clear transfer lines prior to de-coupling.(PROC8b)
Ensure operation is undertaken outdoors.(PROC10, PROC11, PROC13)
Organisational measures to prevent /limit releases, dispersion and exposure
Equipment cleaning and maintenance
Avoid carrying out operation for more than 1 hour.(PROC8a)
Conditions and measures related to personal protection, hygiene and health evaluation
Drum/batch transfers Non-dedicated facility
Wear suitable respiratory protection (conforming to EN140 with Type A filter or better) and gloves (type EN374) if regular skin contact likely.(PROC8a)
Wear suitable gloves tested to EN374.(PROC8a, PROC13)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 78/84 EN
Drum/batch transfers Dedicated facility
Wear suitable respiratory protection (conforming to EN140 with Type A filter or better) and gloves (type EN374) if regular skin contact likely.(PROC8b)
Wear suitable respiratory protection (conforming to EN140 with Type A filter or better) and gloves (type EN374) if regular skin contact likely.(PROC10, PROC11, PROC13)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 79/84 EN
1. Short title of Exposure Scenario 27: Use as water treatment chemicals
Main User Groups SU 3: Industrial uses: Uses of substances as such or in preparations at industrial sites
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC3: Formulation in materials
Activity Covers the use of the substance for the treatment of water at industrial facilities in open and closed systems
2.1 Contributing scenario controlling environmental exposure for: ERC3
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1)
General exposures (open systems) Transfer via enclosed lines.(PROC4)
Equipment maintenance Drain or remove substance from equipment prior to break-in or maintenance.(PROC8a)
Drum/batch transfers Use drum pumps.(PROC8b)
Pouring from small containers
Provide extraction ventilation at points where emissions occur.(PROC13)
3. Exposure estimation and reference to its source
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 80/84 EN
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 81/84 EN
1. Short title of Exposure Scenario 28: Use as water treatment chemicals
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC13: Treatment of articles by dipping and pouring
Environmental Release Categories
ERC8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix
Activity Covers the use of the substance for the treatment of water in open and closed systems.
2.1 Contributing scenario controlling environmental exposure for: ERC8f
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC13
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1)
General exposures (open systems)
Provide a good standard of controlled ventilation (10 to 15 air changes per hour) Transfer via enclosed lines.(PROC4)
Equipment maintenance
Drain or remove substance from equipment prior to break-in or maintenance. Provide a good standard of controlled ventilation (10 to 15 air changes per hour)(PROC8a)
Drum/batch transfers Use drum pumps. Avoid spillage when withdrawing pump.(PROC8b)
Pouring from small containers
Provide extraction ventilation at points where emissions occur.(PROC13)
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 82/84 EN
Organisational measures to prevent /limit releases, dispersion and exposure
Pouring from small containers
Avoid carrying out operation for more than 1 hour.(PROC13)
3. Exposure estimation and reference to its source
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 83/84 EN
1. Short title of Exposure Scenario 29: Explosives manufacture & use
Main User Groups SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Process categories
PROC1: Use in closed process, no likelihood of exposure PROC2: Use in closed, continuous process with occasional controlled exposure PROC3: Use in closed batch process (synthesis or formulation) PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities
Environmental Release Categories
ERC8d: Wide dispersive outdoor use of processing aids in open systems ERC8e: Wide dispersive outdoor use of reactive substances in open systems
Activity Covers exposures arising from the manufacture and use of slurry explosives (including materials transfer, mixing and charging) and equipment cleaning.
2.1 Contributing scenario controlling environmental exposure for: ERC8d, ERC8e
No exposure assessment presented for the environment.
2.2 Contributing scenario controlling worker exposure for: PROC1, PROC2, PROC3, PROC5, PROC8a, PROC8b
Product characteristics
Concentration of the Substance in Mixture/Article
Covers percentage substance in the product up to 100 % (unless stated differently).
Physical Form (at time of use) liquid
Vapour pressure > 10 kPa
Assumes use at not more than 20°C above ambient temp erature.
Frequency and duration of use Covers daily exposures up to 8 hours (unless stated differently).
Technical conditions and measures to control dispersion from source towards the worker
Storage Store substance within a closed system.(PROC1, PROC2)
Bulk transfers Handle substance within a closed system.(PROC3)
Mixing operations (open systems)
Provide enhanced general ventilation by mechanical means.(PROC5)
Drum/batch transfers Use drum pumps.(PROC8a)
Equipment maintenance Drain or remove substance from equipment prior to break-in or maintenance.(PROC8a, PROC8b)
Organisational measures to prevent /limit releases, dispersion and exposure
Material transfers Avoid carrying out operation for more than 1 hour.(PROC8a)
3. Exposure estimation and reference to its source
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
Methyl ethyl ketone
Version 1.1 Print Date 29.01.2013
Revision Date 29.01.2013
PA100144_001 84/84 EN
Environment
No exposure assessment presented for the environment.
Workers
The ECETOC TRA tool has been used to estimate workplace exposures unless otherwise indicated.
4. Guidance to Downstream User to evaluate whether he works inside the boundaries set by the Exposure Scenario
Predicted exposures are not expected to exceed the DN(M)EL when the Risk Management Measures/Operational Conditions outlined in Section 2 are implemented. Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to at least equivalent levels.
Additional good practice advice beyond the REACH Chemical Safety Assessment
Assumes a good basic standard of occupational hygiene is implemented.
BRENNTAG N.V.
BRENNTAG Nederland B.V.
BRENNTAG N.V. Nijverheidslaan 38 BE-8540 DEERLIJK
Tel. +32(0)56/77.69.44 Fax +32(0)56/77.57.11 [email protected] www.brenntag.be Op alle offertes en overeenkomsten zijn de algemene voorwaarden van Brenntag Nederland en/of België van toepassing. Deze zijn gedeponeerd bij de Kamer van Koophandel.
BTW nr. : BE0405317567 KvK Deerlijk no.: HRKortrijk 76927 BRENNTAG Nederland B.V. Donker Duyvisweg 44 NL-3316 BM DORDRECHT
Tel. +31(0)78/65.44.944 Fax +31(0)78/65.44.919 [email protected] www.brenntag.nl
BTW nr. : NL001375945B01 KvK Dordrecht no.: 30112931
COMPANY INFORMATION DISTRIBUTOR
name BRENNTAG N.V. BRENNTAG Nederland B.V.
address Nijverheidslaan 38 8540 Deerlijk
Donker Duyvisweg 44 3316 BM Dordrecht
country Belgium The Netherlands
phone number +32 (0)56 77 69 44 +31 (0)78 65 44 944
fax number +32 (0)56 77 57 11 +31 (0)78 65 44 919
website www.brenntag.be www.brenntag.nl
e-mail [email protected] [email protected]
activities Distribution and export of chemicals and raw materials
VAT number BE0405317567 NL001375945B01
recall procedure available Yes
emergency number (24/365) +32 (0)56 77 69 44 +31 (0)78 6544 944
QUALITY SYSTEMS
ISO 9001 Yes Yes
ISO 14001 Yes Yes
ISO 22000 - Yes
FSSC 22000 - Yes
GMP+ -feed Yes Yes
OHSAS18001 - Yes
ESAD Yes Yes
other - AEO