Download - MV pole, rod and rope insulation tester
Pole, Rod and Rope Insulation TesterTT7415
Pole, Rod and Rope Insulation TesterTT7415
Caliber switch
only one or some green leds must light up
Integrated self test with the tube test
■ Functions of the MV Pole, Rod and Rope Insulation Tester
The TT7415 insulation tester can be used to check alternatively whether the dielectric properties of a material are sufficient and consistent and to locate potential insulation faults.
It has the ability to find internal faults, and is therefore not limited to identifying surface faults.
Based on hi-frequency currents properties, it provides in-depth testing, making this a unique device, especially for ropes.
for testing insulating rods for testing insulating sticks and tubes for testing insulating Ropes
This is a site and field testing device, which can identify insulation faults or dirt on equipment before and after use, or be used for regular preliminary inspections (minimum required).
MV Pole, Rod and Rope Insulation Tester
TT7415
■ Specifications of the MV Pole, Rod and Rope Insulation Tester
Tools and materials that can be tested : Insulating Rods : Ø 10 to 15 mm Insulating Sticks and Tubes :
Ø 32-39, 51, 64 and 77 mm Insulating Ropes : Ø 8 to 13 mm
Power supply : battery 12 V Ni-Cd mains AC 100-240 V – 50/60 Hz
approx. dimensions : 190 x 120 x 135 mm approx. mass : 1.5 kg Supplied in a foamed case with battery
charger and “test” tube.
MV Pole, Rod and Rope Insulation Tester TT7415
■ Standard and Environment
MV Pole, Rod and Rope Insulation Tester TT7415
Compliant with LV, RoHS and DEEE European Directives
All our products help utilities to face global challenges providing high safety level for electrical network improvement operations:Preparation / safetyEfficiency / Availability
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
Work in total confidence
with your powernetwork
HISTORY & FIGURES
1949: creation of the company to supply earthing devices to “compagnie du Rhin”
1960: creation of the French LiveW competence Center (SERECT) in Mulhouse
1989: building of this building specialy designed around high voltage laboratory
1998: integration in Novarc Group 4800 m², 3500 references, TOP80% 1500 ref / 40 products 330 suppliers, 2M components, 200k end products ISO 9002 in 1996, ISO 9001 since 2002 Export rate > 65% in more than 100 countries
