Installer
My Details – All user information for the individual logged in
My Accounts –All current accounts activated by the installer
Initialize an Account – Start the process for activating and
initializing an account.
Installer Integrated Communicator
Profile Management – The list of all available profiles
Product Model – The list of all available product under the profile selected.
SIM – The Sim Card number being initialized.
Installer Integrated Communicator
DNIS – If applicable the 5 digit DNIS number for the communicator
Account Code - The 4 digit account code of the communicator
GPRS Periodic Test Transmission Interval – If applicable the Test Transmission interval for the
GSM/GPRS channel
Supervisory – If applicable the supervisory interval for the communicator
DHCP – If applicable enabling DHCP on the Ethernet portion of the communicator
(TL260GS/TL265GS only)
Please note that not all options may be available depending on the profile
configuration.
Installer Integrated Communicator
IP – IF DHCP is not selected the Static IP address of the Ethernet portion of the communicator
(TL260GS/TL265GS only)
Subnet Mask - IF DHCP is not selected the Subnet IP address of the Ethernet portion of the
communicator (TL260GS/TL265GS only)
Gateway - IF DHCP is not selected the Gateway IP address of the Ethernet portion of the
communicator (TL260GS/TL265GS only)
Ethernet Periodic Test Transmission Interval – If applicable the Test Transmission interval for the
Ethernet channel (TL260GS/TL265GS only)
Please note that not all options may be available depending on the profile
configuration.
Installer Integrated Communicator
Rate Plan – depending on the configuration of the communicator the recommended rate plan will be
displayed. If additional data is expected to be used (DLS IV, Encryption) a higher rate plan may be
selected.
Installer Integrated Communicator
Save Changes - saves any changes to the database but does not update the communicator in the field
Save and Send Changes – saves any changes to the database and requests a programming session
with the communicator. If unsuccessful there will be an indication on the top of the screen indicating an
error.
Clear Programming – Clears the programming of the unit and sets the unit to a “Ready To Activate”
state
Deactivate – Deactivates the SIM with the carrier.
Installer Integrated Communicator
SIM – The Sim Number of the current account.
State – The current state of the Sim Card
Activation Date – The activation date with the
carrier
Carrier Sim Status – This will allow you to request
the current state of the Sim Card from the carrier
Rate Plan – The current rate plan for the
Communicator
Firmware Version – The version of the
Communicator
First Programmed On - The date the unit was
first programmed.
Last Programmed On - The date the unit was
last programmed.
Last Saved On - The date the unit was last
programmed but not sent to the unit
Communication Messages – This contains a
listing of all communications between Connect
24 and the unit
Installer Integrated Communicator
GSM Tab -
Configuration for
the GSM portion of
the
communicators
Please Note – for further information on the specific programming options please refer to the
installation manual for the communicator being activated.
Installer Integrated Communicator
Advanced Tab – Additional programming specific to the DSC Integrated Communicator
Installer Integrated Communicator
Please Note – for further information on the specific programming options please refer to the
installation manual for the communicator being activated.
Ethernet Tab – Additional programming
specific to the DSC Integrated
Communicator (TL260GS/TL265GS
only)
Installer Integrated Communicator
Events Tab – Additional programming specific to the DSC Integrated Communicator
Please Note – for further information on the specific programming options please refer to the
installation manual for the communicator being activated.
Installer Integrated Communicator
Status Tab – Current state of the
communicator. This will display all
currently existing troubles on the DSC
Integrated Communicator.
Please Note – for further information on the specific status messages please refer to the
installation manual for the communicator being activated.
Installer Integrated Communicator
Functions– This tab provides the ability to prompt the unit to perform an action. The actions
include sending a test transmission to one of the four receivers and performing a firmware
upgrade.
Please note that version 1.1 or higher will have receiver test feature.
Installer GS30XX
Profile Management – The list of all available profiles
Product Model – The list of all available product under the profile selected.
SIM – The Sim Card number being initialized.
Installer GS30XX
DNIS – If applicable the 5 digit DNIS number for the communicator
Account Code - The 4 digit account code of the communicator
Periodic Test Transmission Interval – If applicable the Test Transmission interval for the
GSM/GPRS channel
Supervisory – If applicable the supervisory interval for the communicator
DHCP – If applicable enabling DHCP on the Ethernet portion of the communicator
(TL260GS/TL265GS only)
Communicator – Determines if the communicator operates as a primary or backup mode.
Installer GS30XX
Profile Management – The list of all available profiles
Product Model – The list of all available product under the profile selected.
SIM – The Sim Card number being initialized.
Installer GS30XX
Rate Plan – depending on the configuration of the communicator the recommended rate plan will be
displayed. If additional data is expected to be used (DLS IV, Encryption) a higher rate plan may be
selected.
Installer GS30XX
SIM – The Sim Number of the current account.
State – The current state of the Sim Card
Activation Date – The activation date with the
carrier
Carrier Sim Status – This will allow you to request
the current state of the Sim Card from the carrier
Rate Plan – The current rate plan for the
Communicator
Firmware Version – The version of the
Communicator
First Programmed On - The date the unit was
first programmed.
Last Programmed On - The date the unit was
last programmed.
Last Saved On - The date the unit was last
programmed but not sent to the unit
Communication Messages – This contains a
listing of all communications between Connect
24 and the unit
Installer GS30XX
Save Changes - saves any changes to the database but does not update the communicator in
the field
Save and Send Changes – saves any changes to the database and requests a programming
session with the communicator. If unsuccessful there will be an indication on the top of the screen
indicating an error.
Clear Programming – Clears the programming of the unit and sets the unit to a “Ready To
Activate” state
Deactivate – Deactivates the Sim with the carrier.
Installer GS30XX
Output Tab - Configuration for the outputs for the GS30XX
Please Note – For further information on the specific outputs please refer to the installation
manual for the communicator being activated.
Installer GS30XX
Please Note – for further information on the inputs please refer to the installation manual for the
communicator being activated.
Input Tab - Configuration for the inputs for the GS30XX
Installer GS30XX
Events Tab – For the configuration of how the inputs get activated and the reporting code that will
be sent upon activation.