NMI 4 Point Webbing: User Instruction Leaflet To be operated by trained personnel only
Setting up and applying the NMI 4 Point Webbing to secure the wheelchair 1: Attaching Fixed Straps to the front of the wheelchair
Position the wheelchair with
the floor tracking
Lock Plunger Stud Fittings A
(see Note 1 below to see how
to do this) of Fixed Straps into
tracking in front of the
wheelchair
Separate belt tongue C and
buckle by pressing button D
while pulling apart
Wrap around appropriate
attachment point on front of
wheelchair and reconnect with
buckle D. Repeat process on
other side of wheelchair
s 0 N
� E
! i � z 2: Attaching Adjustable Straps to the rear of the wheelchair and securing it from movement
,------,---,,------Tlrll..,-----c:-7 t
Separate ends of the
adjustable strap by pulling
velcro patches E apart
E
E
G
To make the belt adjustable push in F of G and rotate G to
the other end
Insert Plunger Stud Fitting A
into tracking behind the
wheelchair
A REMEMBER
Attach karabiners (H) to
manufacturer's recommended
attachment points at the back
of the wheelchair
-�8 @
s 0
q
> � t5 2
L__ _______ ...L;.11....,;J�
Pull loose ended strap K till
webbing is tight and so strap
in front of the wheelchair is
also in tension
Lil You have only secured the wheelchair.
The wheelchair occupant must be secured independently. Close G till F engages so the
strap becomes fixed. Repeat
tensioning process on other
side of wheelchair to secure it.
The wheelchair should not be
able to move
Reattach the loose end of the
strap to the Velcro patch.
Repeat on other strap
Note 1: Plunger Stud Fitting installation/removal
Attach the webbing devices to
the floor by Inserting the
Plunger Stud Fitting (A) into
the floor tracking
Slide the Plunger Stud Fitting
until plunger B drops into a
hole in the floor tracking. The
device is now locked in the
floor tracking
To remove pull up Plunger B,
slide Plunger Stud Fitting A till
the unit aligns with the holes
in the track. When aligned the
device can be lifted out
pl of 1
HelpiV1.9 w\Ore people to travel iV1. safety aV1.d coVV\fort 16 IO Centre, Arlington Business Park, Whittle Way, Stevenage, Hertfordshire, SG1 2BDTel. +44 (0)20 8801 5339/5512 Fax. 01438 367 829 Email: [email protected] Web: www.nmisafety.com