NuTiny-SDK-NUC240 User Manual
ARM Cortex™-M0
32-BIT MICROCONTROLLER
Publication Release Date: Sep. 14, 2012
Revision V1.0
- 1 -
NuTiny-SDK-NUC240 User Manual For NuMicro
™ NUC240 Series
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro™
microcontroller based system design. Nuvoton assumes
no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 2 -
1 Overview ....................................................................................................... 3
2 NuTiny-SDK-NUC240 Introduction .................................................................... 3
2.1 NuTiny -SDK-NUC240 Jumper Description ................................................................. 4 2.2 Pin Assignment for Extended Connector .................................................................... 5 2.3 NuTiny-SDK-NUC240 PCB Placement ........................................................................ 6
3 How to Start NuTiny -SDK-NUC240 on the Keil μVision® IDE ................................ 7
3.1 Keil uVision® IDE Software Download and Install ........................................................ 7 3.2 Nuvoton Nu-Link Driver Download and Install ............................................................ 7 3.3 Hardware Setup ..................................................................................................... 7 3.4 Smpl_NuTiny-NUC240 Example Program ................................................................... 8
4 How to Start NuTiny-SDK-NUC240 on the IAR Embedded Workbench ................... 9
4.1 IAR Embedded Workbench Software Download and Install ........................................... 9 4.2 Nuvoton Nu-Link Driver Download and Install ............................................................ 9 4.3 Hardware Setup ..................................................................................................... 9 4.4 Smpl_NuTiny-NUC240 Example Program ................................................................. 10
5 NuTiny-EVB-NUC240 Schematic ..................................................................... 11
6 Download NuMicro™
Family Related Files from Nuvoton Company ................................ 13
6.1 Download NuMicro™ Keil μVision® IDE Driver ............................................................ 13 6.2 Download NuMicro™ IAR EWARM Driver ................................................................... 15 6.3 Download NuMicro™ NUC100 Series BSP Software Library .......................................... 17
7 Revision History .............................................................................................. 18
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 3 -
1 Overview
NuTiny-SDK-NUC240 is the specific development tool for NuMicro NUC240 series. Users can use NuTiny-SDK-
NUC240 to develop and verify the application program easily.
NuTiny-SDK-NUC240 includes two portions. One is NuTiny-EVB-NUC240 and the other is Nu-Link-Me. NuTiny-EVB-
NUC240 is the evaluation board and Nu-Link-Me is its Debug Adaptor. Thus, users do not need other additional ICE or
debug equipments.
2 NuTiny-SDK-NUC240 Introduction
NuTiny-SDK-NUC240 uses the NUC240VE3AE as the target microcontroller. Figure 2-1 is NuTiny-SDK-NUC240 for
NUC240 series, the left portion is called NuTiny-EVB-NUC240 and the right portion is Debug Adaptor called Nu-Link-
Me.
NuTiny-EVB-NUC240 is similar to other development boards. Users can use it to develop and verify applications to
emulate the real behavior. The on board chip covers NUC240 series features. The NuTiny-EVB-NUC240 can be a real
system controller to design users’ target systems.
Nu-Link-Me is a Debug Adaptor. The Nu-Link-Me Debug Adaptor connects your PC's USB port to your target
system (via Serial Wired Debug Port) and allows you to program and debug embedded programs on the target
hardware. To use Nu-Link-Me Debug adaptor with IAR or Keil, please refer to “Nuvoton NuMicro™
IAR ICE driver
user manual “or Nuvoton NuMicro™
Keil ICE driver user manual” in detail. These two documents will be stored in the
local hard disk when the user installs each driver.
Figure 2-1 NuTiny-SDK-NUC240 (Blue PCB Board)
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 4 -
2.1 NuTiny -SDK-NUC240 Jumper Description
2.1.1 Power Setting
J1: USB port in NuTiny-EVB-NUC240
JP1: VCC5 Voltage connecter in NuTiny-EVB-NUC240
J2: USB port in Nu-Link-Me
JPR1: Select 5V or 3V for system power
POWER model J1 USB port J2 USB port JP2 VCC5 MCU Voltage
Model 1 Connect to PC X DC 5V output DC 5V
Model 2 X Connect to PC DC 5V output DC 5V
Model 3 X X DC 2.8-5.5V input Voltage by VCC input
X: Unused.
2.1.2 Debug Connector
JP4: Connector in target board (NuTiny-EVB-NUC240) for connecting with Nuvoton ICE adaptor (Nu-Link-Me)
JP9: Connector in ICE adaptor (Nu-Link-Me) for connecting with a target board (for example NuTiny-EVB-NUC240)
2.1.3 USB Connector
J1: Mini USB Connector in NuTiny-EVB for application use
J2: Mini USB Connector in Nu-Link-Me connected to a PC USB port
2.1.4 Extended Connector
JP3, JP5, JP7 and JP8: Show all chip pins in NuTiny-EVB-NUC240
2.1.5 Reset Button
SW1: Reset button in NuTiny-EVB-NUC240
2.1.6 Power Connector
JP1: VCC connector in NuTiny-EVB-NUC240
JP2: GND connector in NuTiny-EVB-NUC240
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 5 -
2.2 Pin Assignment for Extended Connector
NuTiny-EVB-NUC240 provides NUC240VE3AE on board and the extended connector for LQFP-100 pin.
Table 2-1 is the pin assignment for NUC240VE3AE.
Pin No Pin Name Pin No Pin Name Pin No Pin Name Pin No Pin Name
01 PE15 26 PE8 51 PE4 76 PA5
02 PE14 27 PE7 52 PE3 77 PA6
03 PE13 28 VBUS 53 PE2 78 PA7
04 PB14 29 VDD33 54 PE1 79 Vref
05 PB13 30 D- 55 PE0 80 AVDD
06 VBAT 31 D+ 56 PC13 81 PD0
07 X32O 32 PB0 57 PC12 82 PD1
08 X32I 33 PB1 58 PC11 83 PD2
09 PA11 34 PB2 59 PC10 84 PD3
10 PA10 35 PB3 60 PC9 85 PD4
11 PA9 36 PD6 61 PC8 86 PD5
12 PA8 37 PD7 62 PA15 87 PC7
13 PD8 38 PD14 63 PA14 88 PC6
14 PD9 39 PD15 64 PA13 89 PC15
15 PD10 40 PC5 65 PA12 90 PC14
16 PD11 41 PC4 66 ICE_DAT 91 PB15
17 PD12 42 PC3 67 ICE_CK 92 XT1_Out
18 PD13 43 PC2 68 VDD 93 XT1_In
19 PB4 44 PC1 69 VSS 94 /RESET
20 PB5 45 PC0 70 AVSS 95 VSS
21 PB6 46 PE6 71 PA0 96 VDD
22 PB7 47 PE5 72 PA1 97 PS2DAT
23 LDO 48 PB11 73 PA2 98 PS2CLK
24 VDD 49 PB10 74 PA3 99 PVSS
25 VSS 50 PB9 75 PA4 100 PB8
Table 2-1 Pin Assignment for NUC 240 Series
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 6 -
2.3 NuTiny-SDK-NUC240 PCB Placement
Users can refer to Figure 2-2 for the NuTiny-SDK-NUC240 PCB placements.
Figure 2-2 NuTiny-SDK-NUC240 PCB Placement
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 7 -
3 How to Start NuTiny -SDK-NUC240 on the Keil μVision® IDE
3.1 Keil uVision® IDE Software Download and Install
Please visit the Keil company website (http://www.keil.com) to download the Keil μVision® IDE and install the RVMDK.
3.2 Nuvoton Nu-Link Driver Download and Install
Please visit the Nuvoton company NuMicro™
website (http://www.nuvoton.com/NuMicro ) to download “NuMicro™
Keil
μVision® IDE driver” file. Please refer to Chapter 6.1 for the detail download flow. When the Nu-Link driver has been
well downloaded, please unzip the file and execute the “Nu-Link_Keil_Driver.exe” to install the driver.
3.3 Hardware Setup
The hardware setup is shown as Figure 3-1
Figure 3-1 NuTiny-SDK-NUC240 Hardware Setup
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 8 -
3.4 Smpl_NuTiny-NUC240 Example Program
This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-NUC240 board.
It can be found on Figure 3-2 list directory and downloaded from Nuvoton NuMicro™
website following on Chapter 6.3.
Directory Project File
Figure 3-2 Smpl_NuTiny_240 Example Directory
To use this example:
The PA.10 LED will toggle on the NuTiny-EVB-NUC240 board.
Start μVision®
Project-Open
Open the Smpl_NuTiny_240.uvproj project file
Project - Build
Compile and link the Smpl_NuTiny-NUC240
application
Flash – Download
Program the application code into on-chip Flash ROM
Start debug mode
Using the debugger commands, you may:
Review variables in the watch window
Single step through code
Reset the device
Run the application
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 9 -
4 How to Start NuTiny-SDK-NUC240 on the IAR Embedded Workbench
4.1 IAR Embedded Workbench Software Download and Install
Please connect to IAR company website (http://www.iar.com) to download the IAR Embedded Workbench and install the
EWARM.
4.2 Nuvoton Nu-Link Driver Download and Install
Please connect to the Nuvoton Company NuMicro™
website (http://www.nuvoton.com/NuMicro) to download
“NuMicro™
IAR ICE driver user manual” file. Please refer to Chapter 6.2 for the detail download flow. When the Nu-
Link driver has been well downloaded, please unzip the file and execute the “Nu-Link_IAR_Driver.exe” to install the
driver.
4.3 Hardware Setup
The hardware setup is shown as Figure 4-1
Figure 4-1 NuTiny- SDK-NUC240-100 Hardware Setup
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 10 -
4.4 Smpl_NuTiny-NUC240 Example Program
This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-NUC240 board.
It can be found on Figure 4-2 list directory and downloaded from Nuvoton NuMicro™
website following on Chapter 6.3.
Directory Project File
Figure 4-2 Smpl_NuTiny-NUC240 Example Directory
To use this example:
The PA.10 LED will toggle on the NuTiny-EVB-NUC240 board.
Start IAR Embedded Workbench
File-Open-Workspace
Open the Smpl_NuTiny_240.eww workspace file
Project - Make
Compile and link the Smpl_NuTiny-240 application
Project – Download and Debug
Program the application code into on-chip Flash
ROM.
Single step through code
Reset the device
Run the application
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 11 -
5 NuTiny-EVB-NUC240 Schematic
P84
P71
P54
D12MO
P81
R10
0R0603
D12MI
P23
P26
DAVDD
P3
CB1
0.1u
C0603
P11
TICECLK
DM1
P16
P22
P62
P72
C220p
C0603
P95
P53
P36
P92
P89
RESET
P24
USBD+
P60
JP4
HEADER 5X2
1 23 45 67 89 10
P21
DVCC5
DX
32I
USBD+
P11
P9
P32
U1 NUC240_LQFP100
50494847464544434241403938373635343332313029282726
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
987654321
100999897969594939291908988878685848382818079787776
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
TM1/SPISS11/PB.9TM2/SPISS01/PB.10
TM3/PMW4/PB.11T1EX/PWM5/PE.5
PE.6I2SLRCLK/SPISS00/PC.0I2SBCLK/SPICLK0/PC.1I2SDI/SPIMISO00/PC.2
I2SDO/SPIMOSI00/PC.3SPIMISO01/PC.4SPIMOSI01/PC.5
TX2/PD.15RX2/PD.14
CANTX0/PD.7CANRX0/PD.6
T3EX/SC2CD/CTS0/PB.3T2EX/RTS0/PB.2
TX0/PB.1RX0/PB.0USB_D+USB_D-VDD33VBUSPE.7PE.8
VS
SV
DD
LD
O_C
AP
CT
S1/P
B.7
RT
S1/P
B.6
TX
1/P
B.5
RX
1/P
B.4
SP
IMO
SI3
1/P
D.1
3S
PIM
ISO
31/P
D.1
2S
PIM
OS
I30/P
D.1
1S
PIM
ISO
30/P
D.1
0S
PIC
LK
3/P
D.9
SP
ISS
30/P
D.8
I2C
0S
DA
/PA
.8I2
C0S
CL/P
A.9
CA
NT
X1/I
2C
1S
DA
/PA
.10
CA
NR
X1/I
2C
1S
CL/P
A.1
1X
32_I
X32_O
VB
AT
AD
1/C
PO
1/P
B.1
3IN
T0/S
PIS
S1/P
B.1
4P
E.1
3P
E.1
4P
E.1
5
CLKO/TM0/PB.8/STADCPVSSPS2CLK/PF.3PS2DAT/PF.2VDDVSS/RESETXT_IN/PF.1XT_OUT/PF.0T0EX/INT1/PB.15CPP1/PC.14CPN1/PC.15CPP0/PC.6/SC0CDCPN0/PC.7/SC1CDSPIMOSI21/PD.5SPIMISO21/PD.4SPIMOSI20/PD.3SPIMISO20/PD.2SPICLK2/PD.1SPICS20/PD.0AVDDVREFADC7/PA.7/SC1DAT/SPISS21ADC6/PA.6/SC1CLKADC5/PA.5/SC1RST
SC
1P
WR
/AD
C4/P
A.4
SC
0D
AT
/AD
C3/P
A.3
SC
OC
LK
/AD
C2/P
A.2
SC
OR
ST
/AD
C1/P
A.1
SC
0P
WR
/AD
C0/P
A.0
AV
SS
VS
SV
DD
ICE
_C
LK
ICE
_D
AT
SC
2D
AT
/PW
M0/P
A.1
2S
C2C
LK
/PW
M1/P
A.1
3S
C2R
ST
/PW
M2/P
A.1
4S
C2P
WR
/I2S
MC
LK
/PW
M3/P
A.1
5M
CLK
/SP
ISS
10/P
C.8
SP
ICLK
1/P
C.9
SP
IMIS
O10/P
C.1
0S
PIM
OS
I10/P
C.1
1S
PIM
ISO
11/P
C.1
2S
PIM
ISO
11/P
C.1
3P
WM
6/P
E.0
PW
M7/P
E.1
PE
.2P
E.3
PE
.4
TICERST
P62
ICERST
P91
P41
GND
PR1
500R0603
P91
P99
D12MO
P13
P31
P65
P14
L4
L0805
DVCC5
P8
DX32I
P5
P4
P74
DVCC5
VCC
P51
JP1
HEADER 2
12
TICERST
P86
P59
P56
P88
P95
DX32O
P12
P37
P34
L2
L0603DAVDD
P7
P21
C520p
C0603
ADAVSS
ICERST
P20
P2
GN
D
P57
DVCC5
GND
ICERST
P77
P61
P66
P6
JP7
HEADER 13X2
1 23 45 67 89 1011 1213 1415 1617 1819 2021 2223 2425 26
RESET
P84
P94
P18
P40
P52
P97
JP2
HEADER 2
12
P4
P17
P13
P29
P61
DVCC5
DVCC5
ICECLK
P87
P49
P43
Reset P71
X1
32.768K
XTAL-3.4MM-2P
P93
P22
P35
P31
P79
P14
R1
10K
R0603
P8
P33
DVCC5
P64
TICECLK
GND
P50
P68
L3
L0603
Crystal
P56
P78
P42
P50
P73
P86
P10
P6
12
POWER1
KPT-2012KP-2012
DVCC5
P73
ICECLK
P88
P27
P67
ICE INTERFACE
DVCC5
ADAVSS
ICE
DA
T
R2
500R0603
P96
P44
P48
P37
P82
P3
1 2
D1NC
RB060L
P25
P58
P55
ICEDAT
P85
P55
P28
P66
P99
P32
P43
P47
X212MHz
XTAL3-1
P77
P94
P5
P12
12
IO1
KPT-2012KP-2012
P74
P52
VCC5
P10
P97
P30
P40
ICE
CLK
JP8
HEADER 13X2
12
34
56
78
910
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
P80
P36
P39
P64
P87
D12MI
P15
P15
P68
P53
R333
R0603
TICEDAT
P90
P70
P69
P67
P98
P46
P29
P45
C1
10uF/10V
TANT-A
VCC
P78
P93
P19
P49
P18
JP5
HEADER 13X2
12345678910
11121314151617181920212223242526
P75
P2
ICEDAT
P79
P48
P42
DVBUS
P69
P81
P27
P41
P72
P85
P100
CT1
1uF/6.3V
TANT-RP
16
P45
P23
P70
P25
C6
1u
C0603
DM1
P92
P44
P75
P60
P82
P28
P47
P46
SW1
PUSH BOTTOM
SW
P90
P96
DVBUS
P1
P33
JP6
HEADER 4
1234
GN
D
TICEDAT
P54
DX
32O
DP1
P89
P58
P51
R433R0603
P63
VCC5
P100
USBD-
P63
P83
P76
C420p
C0603
VCC5
P20
P34
P19
P7
JP3
HEADER 13X2
12
34
56
78
910
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
DP1
P76
P57
P26
1.0
Nuvoton NU_TINY_120
A2
Monday , July 30, 2012
Title
Size Document Number Rev
Date: Sheet of
P59
J1mini USB 5pin
USB_MINI_B
54321 6
789
GNDNCDPDMVCC SHIELD
SHIELDSHIELDSHIELD
P83
P30
P35
DVBUS
P80
P98
P17
P38
C320p
C0603
DVCC5
P10
P9
USBD-
P1
P24
P38P39
L1
L0603
P65
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 12 -
ICE_CLK
U2
NUC12SRE3AN
4445464748
123
17
18
19
20
21
22
23
24
26
27
28
33343536373839
456
9
78
10111213
25
43424140
14
1615
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
29
30
31
32
PA0/ADC0PA1/ADC1PA2/ADC2PA3/ADC3PA4/ADC4
INT0/PB14CPO1/PB13CPO0/PB12
VB
US
VD
D3
3D
-D
+P
B0
/RX
0P
B1
/TX
0P
B2
/RT
S0
PB
3/C
TS
0
PC
2/S
DI0
0P
C1
/SP
CL
K0
PC
0/S
S0
0
PC11/SDO10PC10/SDI10
PC9/SPCLK1PC8/SS10
PA15/PWM3PA14/PWM2PA13/PWM1
X32IX32OI2C1SCL/PA11
I2C0SDA/PA8
I2C1SDA/PA10I2C0SCL/PA9
RX1/PB4TX1/PB5RTS1/PB6CTS1/PB7
PC
3/S
DO
00
AVSSICE_CK
ICE_DATPA12/PWM0
LDO
VSSVDD
AD
C/P
A5
AD
C6
/PA
6A
DC
7/P
A7
AV
DD
CP
N0
/PC
7C
PP
0/P
C6
CP
N1
/PC
15
CP
P1
/PC
14
INT
1/P
B1
5X
T1
_O
ut
XT
1_In
/RE
SE
TV
SS
1V
DD
1P
VS
SS
TA
DC
/TM
0/P
B8
PE
5P
B1
1/T
M3
PB
10/S
S0
1/T
M2
PB
9/S
S1
1/T
M1
ICELED
US
B_
D-
CB30.1u
C0603
DM
JP9
HEADER 5X2
1 23 45 67 89 10
1.0
Nuvoton NU_TINY_120
Custom
Tuesday , May 29, 2012
Title
Size Document Number Rev
Date: Sheet of
VCC5
RICK1
100K
R0603
12M_I
AVDD
GREEN
VCC5
UP1RT9164A-3.3v
3 1 2 4
IN GN
DO
UT
OU
T
USBVBUS DP
CP1
10uF/10V
TANT-B
12M
_I
RRSET1
100K
R0603
RTIDA1
100K
R0603
DM
CB20.1u
C0603
USBVBUS ICE_CLK
TICERST
12
IDLE1
KPT-2012KP-2012
12
D2
SS24ARB060L
X312MHz
XTAL3-1
ICE CONNECT IFVCC5
GREEN
ISPLED
L7
L0805
TICECLK
DEBUG
JP11
HEADER 4
1234
RED
VCC5
12
BUSY1
KPT-2012KP-2012
ICE_DAT
L6L0603
ICELED
CT2
10uF/6.3V
TANT-R
ADAVSS
ICE_DAT
RTDA2
0R0603
USBVBUS
VCC5
C820p
C0603
TICERST12
ICE1
KPT-2012KP-2012
TICEDAT
AVDD
PVSS
ADAVSS
1 2
PD1SS24A
RB060L
TICEDAT
TICECLK
J2mini USB 5pin
USB_MINI_B
54321 6
789
GNDNCDPDMVCC SHIELD
SHIELDSHIELDSHIELD
TICERST
RP1
8P4R-330
8P4RA
1 23 45 67 8
VCC5
RTDA3
1K
R0603
VCC5
VCC
12M
_O
C7
10uF/10V
TANT-A
12M_O
RTCK1
100K
R0603
GND
ICE_RST
JP10
HEADER 5
12345
NUC_RST#
JPR1
HEADER 3
123
R6
33
R0603
VCC5
NU
C_
RS
T#
VCC5
R5
10K
R0603
VB
US
USBVBUS
DP
C920p
C0603
VCC5
C10
1u
C0603
ICE_RST
VCC5
TICERST
R833R0603
US
B_
D+
P5V
12
ICP1
KPT-2012KP-2012
TICECLK
RTDA1
100K
R0603
VCC5
TICEDAT
L5L0603
RED
P3V
R933R0603
ISPLED
R7
1M
R0603
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 13 -
6 Download NuMicro™ Family Related Files from Nuvoton Company
6.1 Download NuMicro™
Keil μVision® IDE Driver
Step1
Visit the Nuvoton NuMicro™
website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter Device Driver and Software Library
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 14 -
Step 3
Step 4
Download the NuMicro Keil μVision
® IDE driver
To download the file.
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 15 -
6.2 Download NuMicro™
IAR EWARM Driver
Step1
Visit the Nuvoton NuMicro™
website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter Device Driver and Software Library
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 16 -
Step 3
Step 4
Download the NuMicro™
IAR Embedded Workbench® driver
To download the file
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 17 -
6.3 Download NuMicro™ NUC100 Series BSP Software Library
Step1
Visit the Nuvoton NuMicro™
website: http://www.nuvoton.com/NuMicro
Step2
Step 3
Download the NuMicro™
NUC200 series software library
Click here to enter Device Driver and Software Library
NuTiny-SDK-NUC240 User Manual
Publication Release Date: Sep. 14, 2013
Revision V1.0 - 18 -
7 Revision History
Version Date Page Description
1.0 Sep. 14, 2013 -- Initial Release
Important Notice
Nuvoton products are not designed, intended, authorized or warranted for use as components in systems or equipment
intended for surgical implantation, atomic energy control instruments, airplane or spaceship instruments, transportation
instruments, traffic signal instruments, combustion control instruments, or for other applications intended to support or
sustain life. Further more, Nuvoton products are not intended for applications wherein failure of Nuvoton products could
result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur.
Nuvoton customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Nuvoton for any damages resulting from such improper use or sales.
Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies
mentioned in this datasheet belong to their respective owners.