OEM Product Technical Specifications
GEN.0000000004183
T a b l e o f C o n T e n T s
DisC brake speCifiCaTions .............................................................................................................................................................................................................................4
HyDrauliC anD MeCHaniCal DisC brake fork MounTs ...................................................................................................................................................................... 5INTErNaTIONal STaNdard FOrk MOuNT ......................................................................................................................................................................................................................................................................5FOrk POST MOuNT (dIrEcT MOuNT FOr 160 MM rOTOr) ......................................................................................................................................................................................................................................615 MM & 20 MM Thru-axlE FOrk POST MOuNT (dIrEcT MOuNT FOr 160 MM rOTOr) ..........................................................................................................................................................................7
HyDrauliC anD MeCHaniCal DisC brake rear MounTs ...................................................................................................................................................................... 8dIrEcT MOuNT FOr avId rOTOrS MY2012 FOrward ..............................................................................................................................................................................................................................................9rEar POST MOuNT FOr avId rOTOrS PrIOr TO MY2012 .....................................................................................................................................................................................................................................10
Hub Drawing - Hub speCifiCaTions ............................................................................................................................................................................................................ 119 MM FrONT hub ............................................................................................................................................................................................................................................................................................................................ 1115 MM Thru-axlE FrONT hub ................................................................................................................................................................................................................................................................................................ 1120 MM FrONT hub ......................................................................................................................................................................................................................................................................................................................... 1115 MM Thru-axlE FrONT ......................................................................................................................................................................................................................................................................................................... 1120 MM Thru-axlE FrONT ........................................................................................................................................................................................................................................................................................................ 11
roTor DiMensions .............................................................................................................................................................................................................................................12
spoke ClearanCe ..............................................................................................................................................................................................................................................13
Caliper posiTioning sysTeM (Cps) ............................................................................................................................................................................................................. 14FrONT calIPEr .............................................................................................................................................................................................................................................................................................................................. 14INTErNaTIONal STaNdard ................................................................................................................................................................................................................................................................................................... 1420 MM rEar POST MOuNT adaPTErS .............................................................................................................................................................................................................................................................................. 14rEar calIPEr ................................................................................................................................................................................................................................................................................................................................. 14
Caliper anD spaCer ConfiguraTion .........................................................................................................................................................................................................15
Caliper MounTing opTions .......................................................................................................................................................................................................................... 16calIPEr MOuNTING OPTIONS ................................................................................................................................................................................................................................................................................................ 16brackETS FOr avId calIPErS MY2012 FOrward ................................................................................................................................................................................................................................................... 16brackETS FOr avId calIPErS PrIOr TO MY2012 ..................................................................................................................................................................................................................................................... 17
HyDrauliC DisC brake lever ....................................................................................................................................................................................................................... 18
brake fluiD & HyDrauliC line ..................................................................................................................................................................................................................... 19brakE FluId .................................................................................................................................................................................................................................................................................................................................... 19hYdraulIc lINE ............................................................................................................................................................................................................................................................................................................................ 19FrONT brakE ................................................................................................................................................................................................................................................................................................................................. 19rEar brakE .................................................................................................................................................................................................................................................................................................................................... 19
MeCHaniCal DisC brake speCifiCaTions ..................................................................................................................................................................................................21ball bEarING 7 ............................................................................................................................................................................................................................................................................................................................. 21ball bEarING 5............................................................................................................................................................................................................................................................................................................................. 21
riM brake speCifiCaTions ...............................................................................................................................................................................................................22rEar INTErNaTIONal STaNdard aNd POST FOrk MOuNT ............................................................................................................................................................................................................22SPEEd dIal ....................................................................................................................................................................................................................................................................................................................22brakE bOSS dIMENSIONS.....................................................................................................................................................................................................................................................................................23brakE bOSS SPacING .............................................................................................................................................................................................................................................................................................23lINk TO arM dIMENSION .......................................................................................................................................................................................................................................................................................24brakE Pad adjuSTMENT SlOT .........................................................................................................................................................................................................................................................................24cablE lINk / NOOdlE / bOOT ...........................................................................................................................................................................................................................................................................25brakE lEvEr SPEcIFIcaTIONS ..........................................................................................................................................................................................................................................................................25cablE carrIEr aNd STraddlE cablE lENGTh ...................................................................................................................................................................................................................................26
4 Disc Brake specifications
D i s C b r a k e s p e C i f i C a T i o n s
i M p o r Ta n T•avid disc brakes are designed to common industry standards.
The following drawings provide specific dimensions, tolerances, and caliper footprint areas.
•Except where noted, all specifications are in millimeters.
5 HyDraulic anD MecHanical Disc Brake fork Mounts
International Standard Fork Mount
70
50
51±0.1
(2.2)
87.3±0.1
49.7±0.1
4±0.1
60 CALIPER CLEARANCE AREA
2 X 6.2
Name references: International Mount
2 x 6Ø
50
(2.2)
51±0.1
49.7±0.1
4±0.1
87.3±0.1
70
Ø 60 caliper clearance area
H y D r a u l i C a n D M e C H a n i C a l D i s C b r a k e f o r k M o u n T sD i s C b r a k e s p e C i f i C a T i o n s
6 Disc Brake specifications
6.8
56±0.1
74.17±0.1
0.94
6.3
10°
M6 X 1- 6H, 2X15 mm MAX THREAD DEPTH
Fork Post Mount (direct Mount for 160 mm rotor)
10°
0.946.30
6.874.14±0.10
M6 x 1 - 6h, 2x15 mm Max Thread depth
56±0.10
Name references: Post Mount
7 Disc Brake specifications
74.17±0.1
10.94
5.94
6.8
56±0.1
M6 X 1 -6H, 2X15mm MAXIMUM THREAD DEPTH
15 mm & 20 mm Thru-axle Fork Post Mount (direct Mount for 160 mm rotor)
74.14±0.10
56±0.10
6.8
5.9410.94
M6 x 1 - 6h, 2x15 mm MaxIMuM Thread depth
Name references: Post Mount
8 HyDraulic anD MecHanical Disc Brake rear Mounts
H y D r a u l i C a n D M e C H a n i C a l D i s C b r a k e r e a r M o u n T s
n oT e s1. clearance listed provide proper assemly and hex wrench access to cPS mounting bolts on all disc brake models, as well as the cable anchor bolts on ball bearing mechanical
disc brake models. Tighter clearance may be possible on hydraulic disc brake models. verifying clearance using 3d sales models on all desired configurations is highly recommended.
2. all clearance envelopes are measured from the center axis of International Standard mounting bolt holes or the top surface of the direct mount posts and center axis of the rear cPS mounting bolt.
[3] international standard rear: Sketch applied to the smallest rotor size desired on frame. clearance is sufficient for all larger rotor and bracket sizes. 140IS rear setup shown in view.
[4] Direct Mount (non step-up compatible): Sketch applied to the smallest direct mount size desired on frame. clearance is only sufficient for the desired mounting size. caliper/seatstay interference may occur if larger rotor and bracket sizes are used. direct mount 140 mm shown in view.
[5] Direct Mount (step-up compatible): Sketch applied to the smallest direct mount size desired on frame. clearance is sufficient for the desired mounting size and all larger rotor and bracket sizes. direct mount 140 mm with step-up bracket for 160 mm rotor shown in view.
[3] International Standard rear [4] direct Mount (non step-up compatible) [5] direct Mount (step-up compatible)
40 4040
575757
8
85° 135°135°
135°
21.5
8
9 HyDraulic anD MecHanical Disc Brake rear Mounts
n oT e s1. check fit with avid caliper and rotor.
[2] 15 mm minimum clearance for caliper.
[3] Measured from inside dropout face.
[4] recommended maximum thickness.
[5] True distance.
[6] Perpendicular to thread axis and mounting surface.
direct Mount for avid rotors MY2012 Forward
M6 x 1 12 Min. 2x
74.2 ± 0.1
wheel / rotor this side
hub axle
[4] 11[3] 5.5
[5] dim c
[6] dim a
[6] dim b[5] dim d
[2]
Direct Mount rotor Diameter
DiM a
DiM b
DiM C
DiM D additional notes
Ø 140 mm 47.2 2.2 47.2 89.8140 mm direct Mount - mounting hardware available for 160 mm and 180 mm rotors; no 200 mm rotor option.
Ø 160 mm 56 6.8 58.4 98.5160 mm direct Mount - mounting hardware available for 180 mm and 200 mm rotors; no 140 mm rotor option.
Ø 170 mm 60.3 9.9 61 103 170 mm direct Mount - mounting hardware available for 170 mm rotors.
Ø 180 mm 64.7 11.8 65.7 107.6 180 mm direct Mount - mounting hardware available for 200 mm rotors.
Ø 200 mm 73.3 16.8 75.2 116.9 200 mm direct Mount only.
10 HyDraulic anD MecHanical Disc Brake rear Mounts
n oT e s1. check fit with avid caliper and rotor.
[2] 15 mm minimum clearance for caliper.
[3] caliper clearance circle.
[4] Measured from inside dropout face.
[5] recommended maximum thickness.
[6] True distance.
[7] Perpendicular to thread axis and mounting surface.
rear Post Mount for avid rotors Prior to MY2012
Direct Mount rotor Diameter
DiM a
DiM b
DiM C
DiM D additional notes
Ø 140 mm 47.2 2.2 47.2 89.8140 mm direct Mount - mounting hardware available for 160 mm and 180 mm rotors; no 203 mm rotor option.
Ø 160 mm 56 6.8 58.4 98.5160 mm direct Mount - mounting hardware available for 185 mm and 203 mm rotors; no 140 mm rotor option.
Ø 185 mm 66.6 13.6 68.0 110.2 185 mm direct Mount only - no mounting hardware available for 140, 160, or 203 mm rotors.
Ø 203 mm 74.1 18.5 76.3 118.6 203 mm direct Mount only - no mounting hardware available for 140, 160, or 185 mm rotors.
[5] 11
hub axle
rotor
[4] 5.5[3] 11
[3] (6)
[7] dIM b
[7] dIM a[6] dIM c
74.2
[2]
[6] dIM d
M6 x 1 12 Min. 2x
11 HuB Drawing - HuB specifications
Direct Mount rotor Diameter
DiM a
DiM b
DiM C
DiM D additional notes
Ø 140 mm 47.2 2.2 47.2 89.8140 mm direct Mount - mounting hardware available for 160 mm and 180 mm rotors; no 203 mm rotor option.
Ø 160 mm 56 6.8 58.4 98.5160 mm direct Mount - mounting hardware available for 185 mm and 203 mm rotors; no 140 mm rotor option.
Ø 185 mm 66.6 13.6 68.0 110.2 185 mm direct Mount only - no mounting hardware available for 140, 160, or 203 mm rotors.
Ø 203 mm 74.1 18.5 76.3 118.6 203 mm direct Mount only - no mounting hardware available for 140, 160, or 185 mm rotors.
10.5
34.0 MAX
34.0 MAX
10.5
44.0 BOLT CIRCLE
9 mm FRONT
15 mm THRU-AXLE FRONT 15 mm THRU-AXLE FRONT 20 mm THRU-AXLE FRONT
15.5
34.0 MAX
20 mm THRU-AXLE FRONT
6 x M5 X 0.8 10.0 MIN THREAD
44.0 BOLT CIRCLE
20
6 x M5 X 0.8 10.0 MIN THREAD
15
110 100
100
H u b D r a w i n g - H u b s p e C i f i C a T i o n s
9 mm Front hub 20 mm Front hub
15 mm Thru-axle Front 20 mm Thru-axle Front 15 mm Thru-axle Front hub
Not to scale
12 rotor DiMensions
r o T o r D i M e n s i o n s
34.8MAX CLEARANCE
44BOLT CIRCLE
160
THRU, 6xEQUALLY SPACED
5.5
1.8 mm1.5 mm minimum thickness
rotation
i M p o r Ta n T•The rotor size is the same for front or rear - (140 mm rear only) / 160 / 180 / 200
•The International Standard mounting bracket is only necessary when mounting on International Standard fork of frame mounts.
Torque values
rotor Mounting bolts 6.2 N·m (55 in-lb)
13 spoke clearance
s p o k e C l e a r a n C e
160 0-0.5
2 140 0-0.5
185 0-0.5
203 0-0.5
18.26 MIN
180 0-0.1
200 0-0.5
19.12 MIN
20.09 MIN
21.05 MIN
21.29 MIN
22.01 MIN
22.16 MIN
61 MAX
3
ROTOR MOUNTING FACEHUB AXIS
1
n oT e s[1] caliper body will not extend beyond this datum.
datum accounts for caliper manufacturing tolerances and variation in pad advancement
[2] 140 mm rotor dimensions apply only to rear wheel setups. all other dimensions apply to both front and rear wheel setups.
[3] caliper position shown for 160 mm rotor.
14 caliper positioning systeM (cps)
C a l i p e r p o s i T i o n i n g s y s T e M ( C p s )
i M p o r Ta n T•The cPS hardware is not optional. The proper use (as pictured) is required for proper alignment of the rotor and brake pads.
•The International Standard mounting bracket is only necessary when mounting on International Standard fork or frame mounts.
21 3 4 5 6 7 8 9 10 11 12 13 14 15
B
A
C
D
E
F
G
H
J
K
B
A
C
D
E
F
G
H
J
21 3 4 5 6 7 8 9 10 11 12 13 14 15
K
Inte
rnat
ion
al S
tan
dar
d
international standard Mounting bracket
Torque values
cPS bolts 9-10 N·m (80-90 in-lb)
International Standard Mounting bracket bolts
9-10 N·m (80-90 in-lb)
21 3 4 5 6 7 8 9 10 11 12 13 14 15
B
A
C
D
E
F
G
H
J
K
B
A
C
D
E
F
G
H
J
21 3 4 5 6 7 8 9 10 11 12 13 14 15
K
20 m
m r
ear
Po
st M
ou
nt
ad
apte
rs
post Mount Cps spacer
15 caliper anD spacer configuration
C a l i p e r a n D s p a C e r C o n f i g u r a T i o nc
PS
cal
iper
Frame/Fork rotor upper Spacer upper bolt lower Spacer lower bolt Spacer kit description Figure
140 Post
140 mm N/a 29 mm N/a 29 mm 0 direct Post bracket a
160 mm 17.5 mm 43 mm 12.5 mm 37.5 mm 20 Post Spacer b
160 Post
170 mm 12.5 mm 37.5 mm 7.5 mm 32 mm 10 Post Spacer b
180 mm 17.5 mm 43 mm 12.5 mm 37.5 mm 20 Post Spacer b
185 mm 20.5 mm 46 mm 15 mm 40.5 mm 25 Post Spacer b
180 Post 200 mm 17.5 mm 43 mm 12.5 mm 32 mm 20 Post Spacer b
Sta
ndar
d c
alip
er
Frame/Fork rotor upper Spacer upper bolt lower Spacer lower bolt Spacer kit description Figure
140 Post
140 mm N/a 16.8 mm N/a 16.8 mm 0 direct Post bracket c
160 mm 12.5 mm 37.5 mm 7.5 mm 32 mm 20 Post Spacer b
160 Post
170 mm 10 mm 24 mm 10 mm 24 mm 10 Post Spacer d
180 mm 12.5 mm 37.5 mm 7.5 mm 32 mm 20 Post Spacer b
185 mm 17.5 mm 43 mm 10 mm 37.5 mm 25 Post Spacer b
180 Post 200 mm 12.5 mm 37.5 mm 7.5 mm 32 mm 20 Post Spacer b
Length Length
Spacer cPS washers bolt
Cps standard
top line 140 rotor CPS
140 rotor Non-CPS
all others
top line 140 rotor CPS
140 rotor Non-CPS
all others
top line 140 rotor CPS
140 rotor Non-CPS
all others
top line 140 rotor CPS
140 rotor Non-CPS
all others
Figure a
Figure d
Figure b
Figure c
16 caliper Mounting options
C a l i p e r M o u n T i n g o p T i o n sCaliper MounTing opTions
• Front and rear: Post Mount or International Standard Mount
60 mm i.s. bracket Typical application: rear I.S. mount to a 200 mm rotor.
40 mm i.s. bracket Typical application: rear I.S. mount to a 180 mm rotor.
20 mm i.s. bracket Typical application: rear I.S. mount to a 160 mm rotor.
40 mm post bracket Typical application: 160 direct mount to a 200 mm rotor.
20 mm post bracket Typical application: 160 direct mount to a 180 mm rotor (longer bolts and washers required).
20 mm offset Typical application: 160 direct mount to a 180 mm rotor (cPS washers required).
0 mm i.s. bracket Typical application: rear I.S. mount to a 140 mm rotor.
brackets for avid calipers MY2012 Forward
rotation
17 caliper Mounting options
C a l i p e r M o u n T i n g o p T i o n sCaliper MounTing opTions
• Front and rear: Post Mount or International Standard Mount
140 Direct Mount to 185 post Mount bracket
140 Direct Mount to 160 post Mount bracket
185 i.s. front bracket 203 post Mount bracket
160 i.s. front bracket
140 i.s. rear bracket185 post Mount bracket
185 i.s. rear bracket 203 front boXXer bracket
160 i.s. rear bracket 185 front boXXer bracket
203 i.s. rear bracket 203 is front bracket
rotation
brackets for avid calipers Prior to MY2012
18 HyDraulic Disc Brake lever
H y D r a u l i C D i s C b r a k e l e v e r
arrows must face up
no gap
gap
lever Clamp bolt Torque values
discrete clamp bolts 5-6 N·m (44-52 in-lb)
hinge clamp bolt 5-6 N·m (44-52 in-lb)
Pinch clamp bolts 2.8-3.4 N·m (25-30 in-lb)
xloc hinge clamp bolt 5-6 N·m (44-52 in-lb)
Split clamp bolts 3-4 N·m (35-44 in-lb)
MatchMaker bolts 3-4 N·m (35-44 in-lb)
spliT ClaMp insTallaTion
i M p o r Ta n T
Discrete Clamp
split Clamp MatchMaker
brake lever ClaMp sTyles
pinch ClampHinge Clamp
(MMX)
Xloc/reverb Hinge Clamp
3-4 N·m (35-44 in-lb)
b r a k e f l u i D & H y D r a u l i C l i n e
19 Brake fluiD & HyDraulic line
lever Clamp bolt Torque values
discrete clamp bolts 5-6 N·m (44-52 in-lb)
hinge clamp bolt 5-6 N·m (44-52 in-lb)
Pinch clamp bolts 2.8-3.4 N·m (25-30 in-lb)
xloc hinge clamp bolt 5-6 N·m (44-52 in-lb)
Split clamp bolts 3-4 N·m (35-44 in-lb)
MatchMaker bolts 3-4 N·m (35-44 in-lb)
b r a k e f l u i D & H y D r a u l i C l i n e
brake fluiD
For all avid hydraulic brakes, use only dOT 5.1 or dOT 4.0 brake fluid.
Notice: Do not use DOT 5.0 fluid.
i M p o r Ta n T• The use of proper brake fluid is critical. The only brake fluids currently certified by avid are dOT 4 and dOT 5.1.
• OEM shipping condition - brakes are shipped filled and pre-bled, unless otherwise specified.
HyDrauliC line
• aftermarket hydraulic line lengths (one front, one rear): one end is crimped and terminated. replaceable fittings are installed by the end user into the un-terminated end to allow custom hydraulic line length.
• banjo bolt torque: 3.5 N·m (40 in-lb)
• calculating hydraulic line lengths:
front: Stem length (center-to-center) + Fork length (center of dropout to top of steerer tube) + 65 mm. rear (Top Tube routing): Stem length (center-to-center) + Top Tube length (center-to-center) + Seatstay length (center of seattube to center of dropout) + 65 mm. rear (Down Tube routing): Stem length (center-to-center) + head Tube length + down Tube length (center-to-center) + chainstay length (center of seattube to center of dropout) + 65 mm.
Front brake rear brake
20 Brake fluiD & HyDraulic line
exposed Hose length “X” indicated Hose length
615 650
665 700
715 750
765 800
815 850
865 900
915 950
965 1000
1015 1050
1065 1100
1115 1150
1165 1200
1215 1250
1265 1300
1315 1350
1365 1400
1415 1450
1465 1500
1515 1550
1565 1600
1615 1650
1665 1700
1765 1800
1865 1900
1965 2000
n oT eFor the indicated length, refer to the closest tabled value of “x”
• banjo Fitting - compression Nut Fitting: measure from the end of the compression nut to the edge of the banjo crimp ferrule.
• compression Nut Fitting - compression Nut Fitting: Measure from the end of one compression nut to the other.
“x” ± 10 mm
“x” ± 10 mm
banjo Fitting compression Nut Fitting
compression Nut Fitting compression Nut Fitting
M e C H a n i C a l D i s C b r a k e s p e C i f i C a T i o n s
21 MecHanical Disc Brake specifications
ball bearing 7
Mounting Options
• front: Post or International Standard Mount
• rear: International Standard Mount
i M p o r Ta n T• brake pad and cable adjustments: the barrel adjuster on the brake levers should be used to remove any slack in the cables. The brake pad adjusting knobs should be used to
adjust for brake pad wear. This prevents affecting the actuation of the brake lever arm.
Torque values
cable anchor bolt 5-7 N·m (40-60 in-lb)
ball bearing 5
Mounting Options
• front: Post or International Standard Mount
• rear: International Standard Mount
i M p o r Ta n T• after the cable is anchored, check to be sure that there is 20 mm or less of excess cable past the anchor bolt.
Torque values
cable anchor bolt 5-7 N·m (40-60 in-lb)
Mounting bolts 9-10 N·m (80-90 in-lb)
CaliperRotor
Brake pad
CaliperRotor
CaliperRotor
Brake pad
CaliperRotor
CaliperRotor
Brake pad
CaliperRotor
CaliperRotor
Brake pad
CaliperRotor
M e C H a n i C a l D i s C b r a k e s p e C i f i C a T i o n s
bb7 brake Pad adjustment
bb5 brake Pad adjustment
Turn both pad adjustment knobs counter-clockwise until desired pad/rotor clearance is achieved (approximately 2 or 3 clicks each).
Outboard pad adjustment knob
Torque to 5-7 N·m (40-60 in-lb)
T25 TOrx®
Even spacing
Turn adjustment knob until the rotor is centered in the caliper.
Inboard pad adjustment knob
22 riM Brake specifications
rear inTernaTional sTanDarD anD posT fork MounT
Caliper/lever Compatibilitylevers/brakes Single digit Shorty Shorty ultimate bb7 MTb & bb5 MTb bb7 road & bb5 road hydraulic discSpeed dial levers x xFr-5 x xhydraulic xroad brake levers x x x
lever cable Pull Single digit Shorty Shorty ultimate bb7 MTb & bb5 MTb bb7 road & bb5 road hydraulic discless than 20 mm x x x20 mm - 32 mm x xGreater than 32 mm Ok Ok
i M p o r Ta n T• brake levers with a cable pull of more than 32 mm are compatible with vid Single digit, bb7 MTb, and bb5 MTb mechanical disc brakes, but reduce brake power.
• avid Single digit, bb7 MTb, and bb5 MTb mechanical disc brakes are compatible with virtually all side-pull specific brake levers. as with any side-pull brake, it is recommended to use adjustable leverage brake levers when using Single digit, bb7 MTb, and bb5 MTb mechanical disc brakes.
speeD Dial
range of speed DialFr-5 Speed dial 7 & Sl ultimate
Minimum cable Pull 25 mm 25 mm 23 mmleverage ratio 2:1 2:1 2:1
Maximum cable Pull 29 mm 32 mm 32 mmleverage ratio 2.75:1 2.75:1 2.75:1
r i M b r a k e s p e C i f i C a T i o n s
23 riM Brake specifications
brake boss DiMensions
brake Post length Standards
dimension “l”
Post-2008 Shimano™ Standard
21.0 mm
Pre-2008 Shimano™ Standard
22.0 mm
brake boss spaCing
avid rim brakes are designed with brake boss spacing at 80 mm. avid brakes are supplied with 3 brake pad spacers (1, 2, and 3 mm) to achieve 3, 4, 5, or 6 mm spacing for proper brake setup. brakes are shipped with the 3 mm spacing setup. reference the spacer chart on this page for recommended spacing to accomodate various rim widths and brake boss spacing.
23 MAX
"L"
8.5±0.1
7.95+0.3-0.1
10 0-0.2 5.5
1
8
12 MIN
12
8
2.4 +0.4 0
NO PAINT ON THESE SURFACES
3 mm
4 mm
5 mm
6 mm
brake Pad Spacer configuration
24 riM Brake specifications
link To arM DiMension
i M p o r Ta n T• To prevent the link from contacting the cable anchor arm, and to prevent further
movement, the link must be at least 38 mm from the inside edge of the cable anchor arm. however, if the link and arms are too far apart, the top of the brake arms can extend too far from the frame or fork and contact the rider’s feet.
brake paD aDjusTMenT sloT
all Single digit brakes:
• Minimum - 21.25 mm
• Maximum - 35.00 mm
> 38 mm
19.00 mm
19.00 mm
38.00 mm
25 riM Brake specifications
Cable link / nooDle / booT
C au Ti o nroller-Type noodles: do not use roller-type noodles with avid side-pull brakes. due to the radius of most roller-type noodles, and the diameter of the brake cable, there is a safety concern. Do noT modify or use the avid rollamajig for brake application.
•The avid cable link on all side-pull brakes (except Single digit ultimate) is made of stainless steel and is riveted onto the brake arm. It is specifically designed for use with the avid noodle.
• The avid noodle on Single digit 7/Sl and ultimate is specifically designed to allow the installation and removal from the link without removing the Overcoat boot from the noodle tip.
• The noodle is available in the following bends: 90, 110, and 135 degrees.
Overcoat boot Installation
brake Caliper Torque values
brake Mounting bolt 5-7 N·m (40-60 in-lb)
brake Pad Fixing bolt 5-7 N·m (40-60 in-lb)
cable anchor bolt 5-7 N·m (40-60 in-lb)
brake lever speCifiCaTions
brake lever Torque values
Speed dial handlebar clamp bolt 6-8 N·m (50-70 in-lb)
Speed dial ultimate handlebar clamp bolt 3-4 N·m (28-36 in-lb)
handlebar clamp diameter (Id) - 22.4 mm
26 riM Brake specifications
79 mm - 82 mm brake boss Spacing
18 mm - 23 mm rim width
w/2
a
Opening
h
h 56.8
d 31.78
c/2
a: length of straddle cable in mm.c: Opening angle of straddle cable in degreesd: designed width of Shorty in mm.h: Total height in mm.h: designed height of Shorty in mm.w: Total width in mm.Pivot width in mm.Opening in mm.
CCC Type s CCC Type a CCC Type b CCC Type D CCC Type C
a: 63.00 mm 73.00 mm 82.00 mm 93.00 mm 106.00 mm
C: 110.00 deg. 95.00 deg. 87.00 deg. 90.00 deg. 80.00 deg.
D: 31.78 mm 31.78 mm 31.78 mm 31.78 mm 31.78 mm
H: 92.94 mm 106.12 mm 116.28 mm 122.56 mm 138.00 mm
h: 56.80 mm 56.80 mm 56.80 mm 56.80 mm 56.80 mm
w/2: 51.61 mm 53.82 mm 56.45 mm 65.76 mm 68.14 mm
pivot width: 63.21 mm 67.64 mm 72.89 mm 91.52 mm 96.27 mm
opening: 39.65 mm 44.08 mm 49.33 mm 67.96 mm 72.71 mm
Cable Carrier anD sTraDDle Cable lengTH
Shorty 6, Shorty 4
27 riM Brake specifications
90° (recommended)
250 mm stradle wire (recommended)145 mm to top of
cable hanger
79 mm - 82 mm brake boss Spacing
18 mm - 23 mm rim width*
Shorty ultimate
Measure brake boss
you must measure your bicycle's brake bosses to determine which spacer configuration your installation requires.
1. Measure the brake boss from the end of the brake boss to the shoulder. 22 mm: You must use the black, 1 mm plastic spacers (a) that fit over the brake boss. 21 mm: You must use the silver, 1 mm steel spacers (b) that fit over the mounting bolt threads.
1a
b
22 mm
21 mm
CoMpaTibiliTy*wheel rims wider than 23 mm (ex. Zipp 303 Cyclocross): use aftermarket brake pad kit part number 00-5115-044-020.
GEN.0000000004183
www.sram.com