![Page 1: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/1.jpg)
How to Backup your data residing on Open-E DSS V6
to iSCSI Target Volumeover a LAN
Software Version: DSS ver. 6.00 up12
Presentation updated: October 2010
![Page 2: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/2.jpg)
2www.open-e.com
Backup to an iSCSI Target Volume over a LAN
This document will explain how to Backup to an iSCSI Target Volume over the LAN, 2DSS V6 systems are required with RAID Arrays.
Backing up to an iSCSI Target Volume over the LAN uses two of the features built intothe Open-E DSS V6:• Local Backup, • Restore.
An example of the configuration:• First Array RAID on the DSS1 is for live data on volume group DATA (vg00),• Second RAID Array on DSS2 is for backup as volume group BACKUP (vg01) configure on the
iSCSI Target Volume.
Setup Backup : Backup schedule is set every day with a 8 weeks retention time for “DATA” share.
SAMPLE CONFIGURATION
![Page 3: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/3.jpg)
3www.open-e.com
Backup to iSCSI Target Volume over a LAN
Recommended Resources• Hardware (two systems requires):
x86 compatible RAID Controller HDD‘s Network Interface Cards
• Software Two Open-E DSS V6 Backup functions are built in the Open-E DSS V6 (without additional
requirements of hardware)
Benefits• Data Redundancy over a LAN• Local data availability
Disadvantages• Natural disasters can destroy both machines
![Page 4: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/4.jpg)
4www.open-e.com
Backup to iSCSI Target Volume over a LAN
1. Hardware configuration2. Configure Destination Node:
• Create a Volume Group, iSCSI volume and target on the DSS2,
3. Connecting iSCSI target Volume using iSCSI Initiator • On DSS 1, connect iSCSI target Volume from DSS2 using iSCSI Initiator on DSS1
4. Configure the Local Backup (on Source Node)• Create a Volume Groups (vg00 and vg01), on DSS1• Create NAS volume and snapshot,• Enable Local backup function• Create Backup Task with Shedule
5. Create the Restore from Backup
TO SET UP BACKUP TO ISCSI TARGET VOLUME OVER A LAN, PERFORM THE FOLLOWING STEPS:
![Page 5: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/5.jpg)
5www.open-e.com
Volume Group (vg00)
NAS volume (lv0000)
Share: Data
Snapshot : snap00000
Volume Group (vg00)
ISCSI volume (lv0000)
iSCSI Target: Target0
Restore
Share: Restore from Backup
Data Server (DSS1)Source nodeIP Address:192.168.0.220
iSCSI initiator
Backup to iSCSI Target Volume over a LAN
Share: Backup of Data
Backup
RAID System 1 RAID System 2
Data Server (DSS2)Destination nodeAddress IP:192.168.0.240
1. Hardware configuration
Volume Group (vg01)
NAS volume (lv0100)
iSCSI Target Volume
![Page 6: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/6.jpg)
6www.open-e.com
2. Configure Destination Node
Volume Groups (vg00)
In Unit manager add the selected physical units (Unit S000 or other) to create a new volume group (in this case, vg00) and click apply button
Under the “CONFIGURATION”tab, select „volume manager” and next Vol. Groups.
Backup to iSCSI Target Volume over a LANData Server (DSS2)Destination nodeIP Address: 192.168.0.240
![Page 7: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/7.jpg)
7www.open-e.com
2. … Continue
Backup to iSCSI Target Volume over a LAN
Select the appropriate volume group (vg00) from the list on the left. In Action select a new iSCSI volume. of the required size. This logical volume will be the destination of the backup process.
After assigning an appropriate amount of space for the iSCSIvolume, click the apply button
Select the appropriate volume Next , select the required sizeof iSCSI volume. In this eg. adding 450 GB for the iSCSIvolume.
Data Server (DSS2)Destination nodeIP Address: 192.168.0.240
![Page 8: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/8.jpg)
8www.open-e.com
The destination iSCSI VolumeBlock I/O is now configured.
iSCSI volume (lv0000)
Data Server (DSS2)Destination nodeIP Address: 192.168.0.240
Backup to iSCSI Target Volume over a LAN
2. … Continue
![Page 9: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/9.jpg)
9www.open-e.com
Data Server (DSS2)Destination nodeIP Address: 192.168.0.240
Backup to iSCSI Target Volume over a LAN
Choose “CONFIGURATION”,„iSCSI target manager” and “Targets” from the menu
iSCSI targets
In the Create new target, click the “apply” to confirm
2. … Continue
![Page 10: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/10.jpg)
10www.open-e.com
Backup to iSCSI Target Volume over a LAN
Select target0 within the Targets field.
To assign a volume to the target, click the buttonlocated under Action
Data Server (DSS2)Destination nodeIP Address: 192.168.0.240
iSCSI targets
2. … Continue
![Page 11: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/11.jpg)
11www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS2)Destination nodeIP Address: 192.168.0.240
The destination iSCSI target is now configured.
iSCSI targets (target0)
2. … Continue
![Page 12: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/12.jpg)
12www.open-e.com
Backup to iSCSI Target Volume over a LAN
iSCSI initiators
Choose “SETUP”, “iSCSI initiators”. In Add new portal server, in field Portal IP enter IP Address of targets on thedestination node (in our example this would be 192.168.0.240) and click the “apply” to confirm.
Data Server (DSS1)Source nodeIP Address: 192.168.0.220
3. Connecting iSCSI target Volume using iSCSI Initiator
![Page 13: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/13.jpg)
13www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
iSCSI initiators
In Portal manager select the name of the iSCSI targets and click the connect button.
Select 192.168.0.240 within the Portals field.
3. … Continue
![Page 14: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/14.jpg)
14www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
iSCSI initiators
iSCSI target:iqn.2009-12:dss2.target0 has been connected successfully.
3. … Continue
![Page 15: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/15.jpg)
15www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
iSCSI initiators
Next, click on the name iSCSItarget within Portals, in this example on the name:iqn.2009-12:dss2.target0.
In Target manager you can view the connected target's name as well as its size.
3. … Continue
![Page 16: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/16.jpg)
16www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
Volume Groups (vg00)
In the Unit manager add the selected physical units (Unit S000) to create a new volume group (in this case, vg00) and click apply button
Under the „CONFIGURATION”tab, select “volume manager” and next Vol. Groups.
4. Configure the Local Backup
![Page 17: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/17.jpg)
17www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
Volume Groups (vg01)
Next add the selected physical units (Unit S003 - from DSS2 as iSCSI Target Volume) to create a new volume group (in this case, vg01) and clickapply button
4. … Continue
![Page 18: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/18.jpg)
18www.open-e.com
Select the appropriate volume group (vg00) from the list on the left and create a new NAS volume of the required size. This logical volume lv0000 will be the source of the localbackup.
After assigning an appropriate amount of space for the NAS volume, click the apply button
Volume Groups (vg00)
NAS volume (lv0000)
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 19: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/19.jpg)
19www.open-e.com
To run the local backupprocess, you must first define a new snapshot in the Volumemanager of the volume to be backed up
After assigning an appropriate amount of space for the snapshot, click the applybutton
Snapshot
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 20: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/20.jpg)
20www.open-e.com
NAS volume(lv0000)
Snapshot
Assign snap00000 to the logical volume to be replicated (in this example - lv0000) and click the apply button
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 21: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/21.jpg)
21www.open-e.com
Select the appropriate volume group, vg01 from the list on the left and create a new NAS volume of the required size. This logical volume lv0100 will be the destination of the localbackup (lv0100 is on the iSCSITarget Volume from DSS2)
Volume Groups (vg01)
NAS volume (lv0100)
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
After assigning an appropriate amount of space for the NAS volume, click the apply button
4. … Continue
![Page 22: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/22.jpg)
22www.open-e.com
Logical volume lv0100 has been created.
Volume Groups (vg01)
NAS volume (lv0100)
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 23: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/23.jpg)
23www.open-e.com
Under the “CONFIGURATION” tab, select the “NAS settings” menu
Local Backup
Check the Use local backupbox. Also select, Default shareon LV as lv0100, and click the apply button.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 24: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/24.jpg)
24www.open-e.com
Under the “CONFIGURATION”tab, select the “NAS resources” menu
Shares: Data
A tree listing of NAS shared volumes (Shares) will appear on the left side of the DSS V6 web GUI. In the example, a shared volume named Data has been created on lv0000.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 25: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/25.jpg)
25www.open-e.com
Shares: Backup of Data
After creation of Data share, you must create a share for thelocal backup. In the example, a shared volume named Backup of Data, has been created on lv0100 physically residing on DSS2 and connected via iSCSI initiator.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 26: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/26.jpg)
26www.open-e.com
Backup pools: Pool60days
In the “Create new pool”, enter a name for the pool and select Tape retention after. In this example, enter 2 months (60days) and click on the createbutton
Under the “MAINTENANCE”tab, select “backup” menu
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 27: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/27.jpg)
27www.open-e.com
Backup devices: Virtual Tape
In “Create new virtual backup device” function, enter a name for the virtual backup device, and select Share. In thisexample choose Backup of Data and click the createbutton
Next, choose Backup devices
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 28: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/28.jpg)
28www.open-e.com
Backup devices: Tape001
After the DSS V6 WEB pagehas been reloaded, the new Backup device should appear. Next, click VirtualTape, in the Backup devices tree
In “Create new tape” functionenter a name for the new tape(Tape001) and select the Poolname. In this example, choosePool60days. Next, check the box, Limit tape size and choose the appropriatecapacity for the new tape. Click the apply button. In thisexample, 4 tapes will be created
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 29: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/29.jpg)
29www.open-e.com
Backup devices: Tape002
Now create the next 3 tapes accordingly
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 30: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/30.jpg)
30www.open-e.com
Backup devices: VirtualTape
After creating tapes in “Backup device tapes” functions, four tapes are present.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 31: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/31.jpg)
31www.open-e.com
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
After configuration of four virtual tapes there will appear four folders on the „Backup of Data” share. In this place resources from „Data” will be backedup.
Share: Backup of Data
![Page 32: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/32.jpg)
32www.open-e.com
Next, you must select sharesfor the local backup (Data). Move the Available shares to be used for the local backup to the Assigned shares area by clicking button
Backup tasks: BackupTask001
Next ,select Backup tasks. In the “Create new backup task” function enter a name for the backup tasks and select the Logical volume. In thisexample choose lv0000
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 33: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/33.jpg)
33www.open-e.com
Backup tasks: BackupTask001
In the “Create new backup task” function, chooseSnapshot and select Store on pool. In this example, snap0000 and Pool60days. Next, select the backup Level(e.g. incremental) check box,Compress data, and click the apply button
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 34: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/34.jpg)
34www.open-e.com
Backup tasks: BackupTask001
In the “Create new schedulefor backup” function, enter a Comment for the newschedule and Select time. In this example choose Weeklyand check the box for all of days of the week. Select time for the start task (8 pm). Next,click the apply button.
After the DSS V6 WEB pagehas been reloaded, the new Backup tasks should appear. Next, click BackupTask001, inthe Backup tasks tree.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 35: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/35.jpg)
35www.open-e.com
Backup tasks: BackupTask001
The Backup tasks function shows the status of the backup tasks
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 36: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/36.jpg)
36www.open-e.com
Backup tasks: BackupTask001
The Backup tasks function shows the backup task runningat 8 pm.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 37: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/37.jpg)
37www.open-e.com
Backup tasks: BackupTask001
Click on the “Runnings tasks” to display detailed information on the current Backup task
Under the “STATUS” tab, select “tasks” and Backup
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
![Page 38: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/38.jpg)
38www.open-e.com
Share: Backup of Data
The configuration of Backup is now complete.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
4. … Continue
After the end of the Backup all data from "Data" share are located in one subfolder „Tape001”.
![Page 39: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/39.jpg)
39www.open-e.com
Shares: Restore from Backup
Under the “CONFIGURATION”tab, select the “NAS resources” menu
In order to execute Restore, you must create a new share. Click Shares on the left side of the DSS V6 web GUI. In the example, a shared volume named Restore from Backuphas been created on lv0000
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. Create the Restore from Backup
![Page 40: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/40.jpg)
40www.open-e.com
Under the “MAINTENANCE”tab, select the “restore” menu
In the “Create new restore task” function, check the boxBackupTask001. Enter a name for the Restore tasks name(e.g. RestoreTask), and select the destination share in the Restore to field. In thisexample, choose Restore fromBackup share. Next, click on the apply button
Restore task: RestoreTask
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. Create the Restore from Backup
![Page 41: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/41.jpg)
41www.open-e.com
Restore task: RestoreTask
After the end of the Restore Backup in “Backup Restoretasks”, you will start the task again
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. … Continue
![Page 42: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/42.jpg)
42www.open-e.com
On the “Restore task”, to display detailed information on the current restore task
Next, click on the “RestoreTask” name
Restore task: RestoreTask
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. … Continue
![Page 43: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/43.jpg)
43www.open-e.com
Restore tasks: RestoreTask
On the “Runnings tasks” to display detailed information on the current Restore from backup task.
Under the “STATUS” tab, select “tasks” and Restore from backup
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. … Continue
![Page 44: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/44.jpg)
44www.open-e.com
After the end of the Restore from Backup all data from the „Data” share are available on the “Restore from Backup” share.
The configuration of the Restorefrom Backup is now complete.
Backup to iSCSI Target Volume over a LANData Server (DSS1)Source nodeIP Address: 192.168.0.220
5. … Continue
Share: Restore from Backup
![Page 45: Open-E Backup to iSCSI Target Volume over a LAN](https://reader034.vdocument.in/reader034/viewer/2022042815/55627d81d8b42ad1688b4ab2/html5/thumbnails/45.jpg)
45www.open-e.com
Thank you!
Follow Open-E: