Katedra za motore i vozila
1
University of ZagrebFaculty of Mechanical Engineering and Naval ArchitectureChair of TransportationDepartment of Engines and Vehicles
Contact: Prof. dr. sc. Zoran LulićFaculty of Mechanical Engineering and Naval ArchitectureIvana Lučića 5HR-10000 ZagrebCroatia
Tel: +385 (0)1 616 81 77Mob: +385 (0)91 616 81 77Fax: +385 (0)1 615 69 40E-Mail: [email protected]
Overview of Departmental ActivitiesOverview of Departmental Activities
Katedra za motore i vozila
2
Faculty of Mechanical Engineering and Naval Architecture (FSB) Zagreb
•
Approx.
480
employees
≈
200
teaching staff (professors, lecturers, assistants)
≈
200
supporting staff
≈
80 research
and scientific
associates
•
Approx. 2500
students
•
13 Chairs
•
19 Laboratories
Katedra za motore i vozila
3
FSB Chair of Transportation –Department of Engines and Vehicles (KMV)
Laboratory for Engines and Vehicles
Department of Engines and Vehicles (9th
floor)
www.fsb.hr/mwww.fsb.hr/miviv
15
employees:1 professor1 lecturer6 assistants2
scientific associates2 laboratory technicianssecretary(2 honorary lecturers)
N
Ivana Lučića street
Katedra za motore i vozila
4
Scientific Activitiy (Basic Research)
Cooperation
with Industry (Applied Research)
Teaching Activity
FSB FSB ––
KMVKMV
Long-term goals of the Department: -
To become a Centre of Excellence
in all fields of motor vehicle technology and engineering,
-
To turn the KMV Laboratory into a national reference centre for the analysis, control and treatment of exhaust emissions, as well as the centre for the study of future green fuels.
FSB –
KMV Centre of Excellence
Katedra za motore i vozila
5
Teaching ActivitiesSubject
HoursECTS
Undergraduate study (semester)
Graduate study (semester) Postgraduate
study5 6 7 8 9 10Volumetric Machines 4+1Internal Combustion Engines A 3+2Internal Combustion Engines B 2+1Reciprocating Engines 3+1Motor Vehicles 3+2Motor Vehicles 2+1Marine Engines -
LaboratoryEngine Design 3+2Engines and Vehicles -
Practicum 0+4Internal Combustion Engines B 2+1Homologation of Motor Vehicles 2+1Computer Simulations in Engine and Vehicle Development 1+3Electrical Systems and Testing of Motor Vehicles 2+1Engines and Vehicles –
Selected Topics 3+1Gliders and Hang Gliders 2+1Engines and Vehicles –
Selected Topics 45Computer Simulations in Engine and Vehicle Development 50Alternative Powertrains
for Motor Vehicles 50Design of Motor Vehicles 50Internal Combustion Engine Thermodynamics 50Engines and Vehicles –
Selected Topics 30Computer Simulations in Engine and Vehicle Development 30Alternative Powertrains
for Motor Vehicles 30
Katedra za motore i vozila
6
Teaching ActivitiesThe KMV Department is promoting regular academic exchange and scientific experience abroad for undergraduate students, PhD students and PostDocs.
•
Dr. D. Kozarac: Fulbright scholarship
(09/2011 –
06/2012) at the
UC Berkeley, San Francisco, USA
•
Dipl. Ing. J. Gusić: 6 months MPhil research semester (05/2010 –
11/2010) at the
DLR Institute
of
Aeroelasticity, Göttingen, Germany
•
Dipl. Ing. B. Beban: 6 months internship
(04/2010 –
10/2010) at the
BMW-FIZ
research centre, Munich, Germany
•
Dipl. Ing. Z. Zmaić: 6
months
PhD research semester (06/2008 –
12/2008) at the DLR Institute of Aeroelasticity, Göttingen, Germany
•
Dr. H. Kozmar: 2
months PhD research semester (05/2006 –
07/2006) at the DLR Institute of Aeroelasticity, Göttingen, Germany
•
Dr. F. Majić: 6 months PhD research semester
(03/2005 –
09/2005) at the DLR Institute of Aeroelasticity, Göttingen, Germany
Katedra za motore i vozila
7
Extracurricular Activities•
Student excursion to the BMW research centre, production plant and museum (2007
and 2010) –
Munich, Germany
•
Safe driving training for students at the PZ Auto testing track –
AMC Mičevec, Zagreb
•
Study trips to Adria Diesel Karlovac, shipyards Pula and
Rijeka, Đuro Đaković Sl. Brod, Lipik Glas, Rasco Kalinovac, Hittner Bjelovar, Diamond Aircraft Wienner Neustadt (Austria), Revoz Novo Mesto
(Slovenia), itd.
•
Formula Student competition
(2006, 2007, 2011)
•
Visit to international motor shows –
IAA Frankfurt 2007, 2009, Hannover
comm. vehicles
2008
•
Visit to motorsport events
–24 hours Nürburgring (2011), F1 Monza
(2008),
FIA GT Brno (2008)
Katedra za motore i vozila
8
Partners from Industry Eurobus ZagrebZET – ARZZET – Tramway and streetcar productionAZ CrobusZiegler – Fire engine technologyVIPCro Dakar TeamGredelj – Railway technologyPSP Okoli – Natural gas storageKvočićRimac Automobiles
Croatian Ministry for the EnvironmentCroatian Department of Trade and IndustryCroatian National Office for Metrology and Surveying
AVL-AST d.o.o. Zagreb (AVL LIST GMBH Graz)DLR GöttingenBMW München
Donations from industry:Citroen CroatiaPZ AutoINA d.d.ScaniaAutoZubakProKlima
Donations from industry:Citroen CroatiaPZ AutoINA d.d.ScaniaAutoZubakProKlima
Katedra za motore i vozila
9
Research & Development for Industry •
Testing of IC engines and electric motors, parameter identification and modelling, verification of engine concepts, optimisation of fuel injection mapping and ECU
SAMPLE
Katedra za motore i vozila
10
Research & Development for Industry •
Development of the
shuttle bus
design for
the airport
Zagreb
(in cooperation with Eurobus)•
Development of the touristic
autobus design for Zagreb, Dubrovnik and other cities (ZET)•
Technical overhaul of the tramway design (ZET Zagreb)•
Analysis of the autobus frame
structural stresses by experiment and FEM numerical simulation
Katedra za motore i vozila
11
Research & Development for Industry •
Design of the racing car for the DAKAR Team Croatia 2012•
Development and testing of the mechanical steering system for vehicles used by drivers with a physical disability
Katedra za motore i vozila
12
Research & Development for Industry •
Development and implementation of novel numerical methods for the simulation of HCCI engine combustion process (in cooperation with AVL, Graz)
Klasični Otto motor
HCCI motor
Katedra za motore i vozila
13
Research & Development for Industry •
Translation of existing vehicle constructions and parts into digital data for CAD/CAM software
(reverse engineering) using GOM 3-D hardware and software Tritop
and
Atos
TRITOP measuring
system
Katedra za motore i vozila
14
Research & Development for Industry •
Feasibility study of the reduction of
NOx
level for the underground natural gas storage PSP Okoli,
Ivanic-Grad•
Improvement of the cooling system and optimisation
of the overall operating performance for the stationary Diesel engines used for electricity production (VIPnet
Zagreb)
Katedra za motore i vozila
15
Research & Development for Industry Numerical simulation
(CFD) of external and internal aerodynamics for
production and racing carsCFD for underbonnet thermal
management analysis
TempTemp
Katedra za motore i vozila
16
Research & Development for Industry •
Homologation and ECE type approval for imported vehicles, racing
cars and prototypes
Katedra za motore i vozila
17
Scientific Activity•
Development of new turbulence models for 0-D numerical simulations of combustion and their implementation in the AVL-Boost software
Katedra za motore i vozila
18
Scientific Activity•
Analysis and simulation of traffic accidents, accident modelling, investigation and improvement of passive vehicle systems for prevention of accidents
Katedra za motore i vozila
19
Scientific Activity•
Analysis of dynamics of road and railway vehicles, simulation-based analysis of complex multibody
systems, testing and optimisation
of virtual vehicle parts
•
Simulation of kinematic
or elasto-kinematic
systems in order to study structural stresses, driving safety and ride comfort
Katedra za motore i vozila
20
•
CFD and wind tunnel measurements for aerodynamics and aeroelasticity of bridge sections, wind barriers and wind-related traffic safety issues (in cooperation with the DLR Göttingen and the University of Florence)
Scientific Activity
University Florence, Prato, ItalyUniversity Florence, Prato, Italy Gradnja vijadukta Hreljin, autocesta ZGGradnja vijadukta Hreljin, autocesta ZG––RIRI
Katedra za motore i vozila
21
Scientific Activity•
Validation of advanced CFD methods (DES/LES) for bluff-body aerodynamics
LES of the Ahmed Body flow
Katedra za motore i vozila
22
List of Selected PublicationsMannini, C., Šoda, A., and Schewe
G.: Numerical investigation on the three-dimensional unsteady flow past a 5:1 rectangular cylinder, Journal of Wind Engineering and Industr. Aerodyn., Volume 99 (2011), Issue 4, pages 469–482Šoda, A., Mannini, C., and Sjerić, M.: Investigation of Unsteady
Air Flow around Two-Dimensional Rectangular Cylinders, Transactions of FAMENA broj 2 (2011), godište 35, pages 11–34Kozarac, D., Mahalec, I., and Sjeric M.: Introducing Initial Conditions with Non-uniform Mixtures and Fuel Injection into the Multi Zone HCCI Simulation Model, SAE Technical paper 2010-01-1083, 2010Mannini, C., Šoda, A., Voss, R., and Schewe
G.: Unsteady RANS simulations of flow around a bridge section, Journal of Wind Engineering and Industrial Aerodynamics, Volume 98 (2010), Issue 12, pages 742–753 Kozarac, D., Lulić, Z., and Šagi, G.: A six-zone simulation model for HCCI engines with a non-segregated solver of zone state, Combustion theory and modelling, Vol. 14 (2010) , Nr. 3, pages 425–451Šoda, A., Mannini, C., and Schewe G.: Unsteady RANS modelling of
flow past a rectangular cylinder: investigation of Reynolds number effects, Computers & Fluids, Volume 39 (2010), Issue 9, pages 1609–1624Šagi, G., Tomić, R., Ilinčić, P.: Razvoj propisa o dopuštenim emisijama štetnih tvari iz motora s unutarnjim izgaranjem, Goriva i maziva, br. 48 (2009), ISSN 0350-350X, GOMABN 48, 2, pages 159–188Fetahović, B., Ferenčak, M., Radaković, D., Mataga, M., Kozarac,
D.: Choosing the Best Fuel Type for Modern Vehicle Engines?, Modern traffic, Vol. 27 (2007), Nr. 5, pages 368–374, ISSN: 0351–1898Tarnovski, B., Dorić, I., Kozarac, D., Lulić, Z.: Formula student at faculty of mechanical engineering and naval architecture, Modern traffic, Vol. 26 (2006), Nr. 3-4, pages 260–266, ISSN 0351–1898Kozarac, D. Mahalec, I., Lulić, Z.: Homogeneous Charge Compression Ignition Engine Combustion, Strojarstvo –
Journal for Theory and Application in Mechanical Engineering, Vol. 47 (2005), Nr. 5-6, pages 185–193Kozarac, D., Mahalec, I., Lulić, Z.: Design methods for intake manifold elements of reciprocating internal combustion engines, Journal of Mechanical Engineering, Vol. 50 (2004), Nr. 1, pages 55–65, ISSN 0039–2480Mahalec, I.,
Lulić, Z., and
Marjanović, D.: Motor Vehicle Approval in Croatia -
Costs and Benefits, International
Journal
of
Environment
and
Pollution,
Vol. 14 (2000) , Nr. 1-6, pages
425–430