Rear Vision System Camera Switch Panel (CAB000197)
Protecting Your Precious Cargo © Gatekeeper Systems Inc Specifications subject to change without notice. PDN1052 02/08/2010 V2.0
#301 31127 WHEEL AVENUE
ABBOTSFORD. B.C. V2T 6H1
TOLL FREE: 1.888.666.4833
TEL: 1.604.864.6187
FAX: 1.604.864.8490
gatekeeper-systems.com
PRODUCT BULLETIN
(A) Camera Switch Panel Installation :
1) Find a flat area in the driver’s switch panel that will allow for a 1.5” x 1.5” square.
2) Drill a 1” hole in the middle of the 1.5x1.5 area to house the switch tumbler. 3) Mount the switch onto the panel with the four self tapping screws provided. 4) Route the wiring to the ‘Quad Control Box’ harness and connect the wires color for color. 5) The red ‘power’ wire has a 3 Amp fuse, connect to the same power terminal.
Rear Vision System Camera Switch Panel (CAB000197)
Protecting Your Precious Cargo © Gatekeeper Systems Inc Specifications subject to change without notice. PDN1052 02/08/2010 V2.0
#301 31127 WHEEL AVENUE
ABBOTSFORD. B.C. V2T 6H1
TOLL FREE: 1.888.666.4833
TEL: 1.604.864.6187
FAX: 1.604.864.8490
gatekeeper-systems.com
PRODUCT BULLETIN
(B) Wiring :
(C) Camera views on the LCD of Rear Vision System :
3
1
4
2
Quad View
View 1 View 4 View 3
View 4 Quad View
View 1 View 3
View 4
View 2
Red wire � to +12V (on when is powered on)
Black wire � to Reverse Sense (supply +12V to active)
Blue wire � to Camera 1
White wire � to Camera 3
Green wire � to Camera 2
Brown wire � to Camera 4