PRODUCT OVERVIEWLED LIGHT PANEL
Advantage
· Custom size up to 1500mmx3000mm· Customized laser dots design for
different shape/size/light way· High brightness,high evenness· Various LED colour temperatures· Custom colors or RGB/RGBW Changing colour· Single or Double sided· Diffused or Non-diffused surface
PERFECT BACKLIGHTING SOLUTION
Prism Lighting Group's Light Panel, with high brightness, lighting uniformity, is optimal solution to replace traditional LED Strip or LED Module. They are less LED, high efficiency,and super slim, and totally without darkness on the surface. The dots is specially designed for exact requires, no matter how many lux you need, or what you need to demonstrate, they can realize, so in this way, they enhance both brand and products of your customer with an extraordinary visual promotional effect. In addition, with edge-lit technology, it's frame-less, and custom shape as well possible.
High quality LED Strip edge-mount to any shape panels. Input Vol. rated 12vDC/24vDC
After laser dotted, the Mitsubishi Acrylic, say LGP, makes the light uniform. They are able to customised in any shape to anywhere.
Mitsubishi Acrylic, they are stable in both Physical and Chemical, so neither they turn yellow nor fragile.
FRONT VIEW
SPECIFICATIONSELECTRICAL
InputVoltage 12 /24 Volt DC - Constant Voltage
Power Consump 12W/M(3000K,3500K,5300k,6300k)
14.4W/M(4100K)
14.4W/M(Tunable White LEDs)
17.3W/M(RGB LEDs)
Wire Size 22 AWG 2 wire(Standard LEDs)
22 AWG 3 wire(Tunable White LEDs)
22 AWG 4 wire(RGB LEDs)
Wiring Each panel must have direct connection to power supply. Do not wire panels in series.
Wire Length Standard Options 500mm & 1000mm. Custom length options available.
Connector2.1/5.5mm barrel plug
[White Stripe / Center Pin +](Standard White LEDs)
3-pin molex / bare wires[White - Power,
Grey - Warm White,Black - Cool White]
(Tunable White LEDs)
No connector(RGB LEDs)
Customized connection types available
Certificate UL(E476080)
PHYSICAL
Color Temperature
Warm White(WW)
~3000K
Soft White(SW)
~3000K
Neutral White(NW)
~4100K
Pure/Cool White(PW)
~5300K
Ultral White(UW)
~6300K
Tunable White(TW)
3000K - 6500K
Color Adjustable(CA)RGB
Opera -30˚C ~ +40 °C
Environment Dry location only (Standard)
Thickness 4MM (Standard), other thicknesses available depending on the application
Minimum Size 50X50X6MM
Maximum Size 1500X3000X6MM
Tolerance 0-1000mm 1000-2000mm 2000mm+
POWER & CONTROL
Please contact Prism Lighting Group for optimal power & control solutions to fit your requirements
※RGB CONTROLLER,CCT TUNABLE CONTROLLER,LED DIMMER AVAILABLE
01 0
2
03
9 POINTS TESTING
LEDsL
W
Rectangle
Square
LW
LEDs
ILLUMINATED FACE OPTIONS
Both Front and Back Face Illuminated (without white reflector film)
LED LIGHT LOCATIONS
LED LIGHT ALONG 2 EDGES
Non-Illuminated Back Face(white reflector film)
SINGLE FACE ILLUMINATION (STANDARD) DOUBLE FACE ILLUMINATION (OPTION)
LED LIGHT ALONG 1 EDGE
L
Width Less than350mm
LEDs
L
Width over than350mm LEDs
LED LIGHT ALONG ALL 4 EDGES
Width over than 1000mm
Lenght over than 350mm
**Width over than 1000mm,Led light along 4 edges
1000mm
THE STANDARD LOCATION OF WIRE EXIT
STANDARD 1
Wire exit from edge bottom right corner[Available with single color whites, RGB & CCT]
LEDs
LED LIGHT PANEL
STANDARD 2
Wire exit from back of bottom right corner[Available with single color whites, RGB & CCT]
WIRE LOCATION REFERENCE MAP
Long Side
Short Side Front / IlluminatedSide Represented
1
2
3
4
5
6
7
8
LEDs
LED LIGHT PANEL
The wire exit location could be choosed by your installation requirement.
SURFACE MOUTING EXAMPLES
Detailed dimensions from customer required
SCREW MOUNT
*Holes can be drilled at factory according to drawings supplied.
Notes: