Download - Pipes and Tubes
-
Pipes and Tubes
European delivery programmeOctober 2009
-
Foreword pipes and tubes
Foreword
Dear reader,
We proudly present to you our brand-new catalogue. The layout has been refreshed and modernized to increase its
ease of use. Many changes were also made to its content. Indeed, our portfolio is constantly changing in response to
changes in both demand and supply. For example, the transition from DIN standards to Euro Standards is currently
still in full swing. The Euro Standard has already been adopted for many items, while other items are still in a
transition phase. The product tables and the technical information refl ect the most recent state of affairs.
We hope that you will fi nd the information you are looking for in this document. We would also like to refer you
to our website, www.vanleeuwen.com, for additional information. Our website was completely revamped at the
beginning of 2009. Continuous investment in modern communication tools is a top priority for us. The proper
exchange of information is at the root of an enjoyable business relationship. A printed catalogue naturally cannot
compete with the internet and other electronic resources. However, the demand for our catalogues to this very day is
still so high that we are pleased to respond to this need.
Please do not hesitate to contact us should you have any questions. Our contact information is listed on the back of
this publication.
I hope you enjoy perusing this catalogue!
M.A.L.W.J. van Engelen
General Director
Van Leeuwen Buizen, Zwijndrecht, the Netherlands
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 1
-
2 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Table of contentsDelivery programme from stock for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Seamless steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Welded steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Customized services for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Material treatments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Logistics services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Consultancy and customer-specific services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Technical information for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12General factors for conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Overview most important Euronorms for pipe and tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Standards and steel qualities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pipe schedules and wall thicknesses in inch/mm and weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Product descriptions for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Seamless steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Welded steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Pipes and Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix A for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 3
-
Delivery programme from stock for pipes and tubes
Overview delivery programme from stock
1 Seamless steel pipes & tubes
EURONORM
EN 10210-1/2 Seamless steel tubes, steel grade S235 JRH
EN 10210-1/2 Seamless steel tubes, steel grade S355 J2H
EN 10297-1 Seamless steel tubes, steel grade E355 AR
EN 10294 Seamless hollow bar, steel grade E470 AR
EN 10255 Seamless gas tubes, steel grade S195T
EN 10216-1 Seamless steel pipes, steel grade P235 TR1
EN 10216-2 Seamless steel boiler tubes, steel grade P235 GH
API
API 5L Gr. B Seamless steel pipes, steel Grade B
API 5L Gr. B Seamless steel pipes, steel Grade B, galvanised, threaded and coupled
ASTM / ASME
A/SA 106-B Seamless steel pipes, ASTM A106/A530M/SA530 M Grade B
A/SA 333 Gr.6 Seamless steel pipes, ASTM A 333M/SA 333M Gr.6 LT 45
In a number of cases, a combination of the above mentioned standards is applicable.
Pipes and tubes according to any other standard or steel grade can be offered upon request.
4 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Delivery programme from stock for pipes and tubes
2 Welded steel pipes & tubes
DIN
DIN 1626 Welded steel tubes, steel grade St.37.0
DIN 2394 Welded steel precision tubes, steel grade St.34.2
DIN 2394 Welded LEBU central heating pipes, electrolytic zinc plated, steel grade St.34.2
DIN 2440 Welded gaspipes, steel grade St.33
DIN 2441 Welded steam pipes, steel grade St.33
EURONORM
EN 10210-1/2 Welded steel tubes, steel grade S355 J2H
EN 10219-1/2 Welded steel tubes, steel grade S235 JRH
EN 10219-1/2 Welded steel tubes, steel grade S355 J2H
EN 10217-1 Welded steel pipes, steel grade P235 TR1
EN 10217-1 Welded steel pipes, steel grade P265 TR2
EN 10217-2 Welded steel pipes, steel grade P195 GH
EN 10255 Welded gaspipes, steel grade S195 T
EN 10305-3 Welded precision tubes, steel grade E195 + CR1
BS
BS 3059 / 87 part 1 Welded steel boiler tubes, steel grade ERW 320
API
API 5L Gr. B SAW longitudinally welded steel pipes, steel grade B
API 5L Gr. B ERW longitudinally welded steel pipes, steel grade B
API 5L Gr. X42 ERW longitudinally welded steel pipes, steel grade X42
ASTM
A 53 Gr. B ERW longitudinally welded steel pipes, steel grade B
The transition from DIN to EN standards is still in progress. All DIN standards still mentioned above, will be
replaced by EN standards soon. For more information, see the special chapter about Euronorms.
In a number of cases, a combination of the above mentioned standards is applicable.
Pipes and tubes according to any other standard or steel grade can be offered upon request.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 5
-
Customized services for pipes and tubes
Customized Service
Van Leeuwen Buizen is more than just a supplier of materials. We offer a wide range of services to provide you with the most
comprehensive product offering possible. This way we anticipate our customers needs. Our services are designed to speed
up delivery, and make delivery easier and more complete, enabling you to focus on your own core activities. Our services are
subdivided into material treatments, logistics services and customer-specific services.
1 Material Treatments
a. Cutting
We can cut your circular pipes and tubes to fix lengths at our own facilities:
Maximumoutsidediameter:813mm
Minimumlength:20mm
Maximumlength:12meters
For outside diameters > 813 mm, pipes can be cut to fix lengths by oxygen cutting:
Maximumoutsidediameter:1.280mm
Minimumlength:50mm
Maximumlength:12meters
Hollowsectionscanalsobecuttomeasure.Themaximumoutsidedimensionofthehollowsectionsis400x400mmor500x300
mm (the abovementioned specifications otherwise apply).
b. Angular cutting
We can make angle cuts of square and rectangular hollow sections in accordance with your drawings. We can make simple, as
wellassquareandtrapezoidalmitercuts.Onlyasingleanglecutispossibleateachpipeend.Theangletoleranceis-0,25/+0,25.
c. Laser and Plasma Cutting
Laser and plasma cutting allow many variously shaped cut-outs to be made at the end as well as in the middle of the pipe. The
possibilitiesandbenefitsarecountless.Forexample,suchcutscanbemadewithhigherprecisionincomparisontotraditional
cutting methods and there is less loss of material, no burr-forming and the cutting speed is higher. We would be pleased to make
the necessary computations for you to determine if this treatment is beneficial for you as well.
d. Shot-blasting and Priming
Circular pipes and tubes and hollow sections can be shot-blasted and primed.
The following options are available:
ExternalSA2.5shot-blastingtoSwedishStandardSIS0559001967.
Primingusingred-brownKPC7205*AquaWeldingPrimer;layerthicknessapprox25.
PrimingusingaEuroponorSigmaepoxyshopprimer;layerthicknessapprox20.
PrimingusingaSigmaweidMCsilicateshopprimer;layerthicknessapprox20.
* A fast drying water-borne resin-based primer.
6 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Customized services for pipes and tubes
We can also shot-blast and prime individual pipe components for you. Furthermore, there is a combined option consisting of
theinternalandexternalshot-blastingoffittingsortheall-aroundshot-blastingofflanges,followedbyaMagneticParticle
Examination(MPE)test.
The treatments most frequently applied to pipe components are:
ExternalSA2.5shot-blasting
InternalandexternalSA2.5shot-blastingoffittings
ExternalSA2.5shot-blastingandprimingusingEuroluxalkydweldprimer;approx20
ExternalSA2.5shot-blastingandprimingusingSigmaweldshopprimer;approx20
ExternalSA2.5shot-blastingandprimingusingSigmaweldMCzincsilicateshopprimer;approx20
ExternalSA2.5shot-blastingandprimingusingVLBtransparantpipecoating(Eurolux)
All-aroundSA2.5shot-blastingofflanges
ExternalSA2.5shot-blastingandprimingusingzincepoxy;approx20
e. Chemical Cleaning of Pipes and Pipe Components
Inadditiontoshot-blasting,pipesandpipecomponentscanalsobechemicallycleaned.Internalandexternalcleaningthentakes
place at the same time. Depending on the contamination of the pipe or pipe component supplied and the desired delivery state
oftheproduct,theoveralltreatmentcanbemoreextensive.
By completely removing the mill scale and other contamination, this cleaning method not only cleans the surface, but also makes
theproductvulnerabletorenewedcorrosion.Ifnoadditionaltreatmentiseffected,itisrecommendedthatexternalprotection
beprovidedbyapplyingathinlayerofoil.Internalcontaminationcanbepreventedbyusingplasticcapsasaprotectivemeasure.
The following options are available to you:
Degreasing
Pickling,rinsingandphosphating
Pickling,rinsing,phosphatingandcapping
Degreasing,pickling,rinsingandphosphating
Degreasing,pickling,rinsing,phosphatingandcapping
Pickling,rinsing,phosphatingandinternaland/orexternaloiling
Pickling,rinsing,phosphating,internaland/orexternaloilingandcapping
Degreasing,pickling,rinsing,phosphatingandinternaland/orexternaloiling
Degreasing,pickling,rinsing,phosphating,internaland/orexternaloilingandcapping
Definition of concepts used above:
Degreasing: contaminants such as oil and grease are removed prior to pickling.
Pickling: removal of layers of oxidation, annealing and mill scale, and corrosion products.
Phosphating: treatment using a hot phosphoric acid solution to prevent rust (temporary protective layer).
Oiling: Internal and/or external oiling (up to a maximum of 12 meters) using Shell Ensis Fluid E.
f. Hot-dipped galvanizing and Electrolytic zinc plating
Hot-dipped galvanizing involves immersing the material in a bath of liquid zinc. Once it solidifies, the zinc layer acquires a matte
appearance. When pipes with relatively thin walls compared to their diameter are galvanized using this method, there is a risk of
warping. The advantage of hot dipping is that the inside and outside of the material are evenly galvanized. The thickness of the
zinc layer depends on the thickness of the material to be galvanized.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 7
-
Customized services for pipes and tubes
Specifications:
Hot-dippedgalvanizedtoNENEN1461orA-123
Minimumdiameter:17mm
Minimumlength:6meters
Noguaranteethatpipeswillnotwarp
With electrolytic zinc plating the zinc layer is deposited electrolytically by immersing the product in a water-based solution
andpassinganelectriccurrentthroughtheproductandfluid.Thelayerofzincisthenpassivated,whichsignificantlyincreases
its resistance to corrosion. The passivation layer is a thin layer of zinc chromate on top of the zinc layer and can assume various
colors,suchasblue,yellow,greenandblack.Thisgivesthematerialasatinappearance.Incontrasttohotdippedgalvanizing,
thereisnoriskofrelativelythin-walledpipeswarping.Adisadvantageofelectrolyticgalvanizingisthatpipesareonlygalvanized
ontheoutside.Iftheinsidealsoneedstobegalvanized,anadditionalauxiliaryanodeisrequiredontheinside.
Specifications:
Layerthickness:8-12m
Standardbluepassivated;yellowisalsoavailable
For5-7meterpipes
Standardpackaging:perforatedfilm
g. External Polyethylene Coating
Pipesandpipecomponentscanbegivenanexternalpolyethylene(PE)coatingtoextendtheirservicelife.Acoatinglikethisis
usuallyappliedtopipesthatareburiedunderground.Thepolyethyleneisappliedbyhoseorwrappingextrusionfollowingthe
applicationofanepoxyprimerbase.
Specifications:
PEcoatedtoDIN30670N/norEN6901/6902,standardlayerthicknesswithepoxy
baselayer(3-layercoating)usingthehoseextrusionprocess
Color:standardisblack;yellowisalsoavailable
Layerthicknessinaccordancewithstandard
Ifrequired,theKIWAmarkcanbeapplied(fordeliverywithintheNetherlands)
Additional options:
PEcoatingusingthesinteringmethod
ExternalPEcoatingcombinedwithinternalcementlining
h. Annealing
We offer the following options:
GBKannealingatapprox.720C
NBKannealingatapprox.930C
Unless otherwise specified, the pipes will be lightly oiled using spray guns after annealing. Lack of oiling increases the risk of
corrosion significantly.
* NKB annealed circular pipes and tubes are straightened afterwards.
8 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Customized services for pipes and tubes
i. Mechanical Treatments
Van Leeuwen can provide a wide range of mechanical treatments.
The treatments most often requested are:
MachiningofgasketfacesofRFflangestoaflatfacewithafinishofRa=3.212.5micrometers(=125500microinches
AARH)toASME/ANSIB16.5aandB46.11985.
MachiningofgasketfacesofflangestoafinishofRa=4.06.3micrometers(=160250microinchesAARH)to
ANSI/ASMEB46.11985.
MachiningofgasketfacesofflangestoasmoothfinishofRa=3.26.3micrometers(=125250microinchesAARH)
accordingtoShellspecification76/001.Machiningwithatoolradiusof0.8mmandapitchof0.350.45mm.
MechanicaltreatmentofpartiallymachinedANSIflanges,suchas:internaldrillingacrosstheentireheighttoASME/ANSI
B16.51988andB16.5a1992toaspecifiedSchedule.Machiningoftheroot/groovefacetoASME/ANSIB16.51988Fig.8.
Gasketfacetobetreatedtothedesiredtype.
InternaldrillingoftheboreofflangesacrosstheentireheighttoASME/ANSIB16.51988andmachiningtheroot/groove
facetoASME/ANSIB16.51988Fig.8.
MachiningofDINweldingneckflangeswithextrastrongS-size:internaldrillingacrosstheentireheightuptoaspecified
wallthickness;machiningthegasketfacetoafinishofRa=3.26.3micrometers(=125250microinchesAARH);
andmachiningtheroot/groovefacetoDIN2559part105-1973form22.
MachiningofDINweldingneckflangeswithextrastrongS-size:internaldrillingacrosstheentireheightuptoaspecified
wallthickness;machiningofroot/groovefacetoDIN2559part105-1973form22.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 9
-
Customized services for pipes and tubes
2 Logistics Services
a. Storage
One of our core competencies consists of maintaining a broad and in-depth inventory of steel pipes, pipe components and valves.
OurstrategicinventoriesarestoredatvarioussitesinEurope,theMiddleEast,AsiaandAustralia.
Managinginventoriesconsequentlyisaveryimportantactivityforus.Theoptimizationofinventorylevelsandatsameour
ability to guarantee a high level of service to our customers requires our day-to-day attention. We therefore invest a great deal
inourpeople,training,softwaresystemsandresourcestobeabletoachievethis.Forexample,afewyearsagoweintroducedan
advanced platform elevator for storing a major portion of our components. Furthermore, we introduced an innovative software
system for managing our inventories.
b. Distribution
Thespeedofourservicesisakeysuccessfactor.Everyday,largevolumesofsteelpipesandothermaterialsmaketheirwayfrom
strategicallylocatedlogisticscenterstocustomersallovertheworld.Intensificationoftheshuttleservicesbetweenourvarious
stocklocationshasgivenusahighdegreeofflexibilityandraisedourlevelofservice.Furthermore,wecontinuallyinvestinmodern
equipmentdesignedtoimproveourdistribution.Recently,forinstance,wepurchasedaLoadPlate,whichenablesclosedcontainers
tobeloadedmuchfaster.AnotherexampleofcustomdistributionisourHeavyWallExpressservicewithintheBenelux.Cutor
uncutheavywallseamlesspipescanbeorderdupto17:00hours,andaredeliveredbefore12:00thenextday.
c. Export Packaging and Marking
Ourmaterialsareshippedallovertheworld.Wethereforeoffervarioustypesofexportpackaging,includingcrates,boxes
andfilmpackaging.Naturallywealsopackagetoacustomersspecification,withstrawedgingsunderthecabletiesandskids
between the bundles if required. Furthermore, we also apply all required markings, such as paint dots, lines or stencils, including
the desired brand name identification.
d. Document Control
To verify and confirm that our products are made and supplied according to specifications, design drawings, laws and
regulations and other contract-specific requirements, we provide full documentation and document management services. The
documentation may consist of packing lists, material certificates, purchase specifications, order confirmations, invoices, (online)
pricelists,(online)cataloguesandQAcertificates.Weprovidethematerialcertificateselectronicallyandcanputthemtogether
onCD-ROMonaperprojectbasis,forexample.
10 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Customized services for pipes and tubes
3 Consultancy and Customer-specific Services
a. Project Management
Weputtogetherprojectteamsforlarge-scaleprojectsthat,ifdesired,canalsoworkatthecustomerssite.Asidefromlooking
afterthepurchaseofthenecessarymaterials,thisenablesustoprovideexcellentsupportintheareaofexpediting,deliveryand
document control before, during and after the project.
b. Consultancy
Allofouremployeesarethoroughlyfamiliarwithourproducts.Thecontinuityofthisknowledgeisassuredthroughinternal
training programs facilitated by senior staff and training programs facilitated by branche organizations. We also actively contribute
to this area. Furthermore, we have our own metallurgist on staff. He can advise you concerning standards, different quality steel
levels and other material properties to enable you to select the right product for the right application.
c. Testing and Inspection
We can carry out various inspections and material tests for you, destructive and non-destructive. The most common type of
destructive testingconsistsofadditional3.2testingunderthesupervisionofLloydsoranotherindependentinspectionbody.
The following additional tests are also available:
Tensilestrengthtest
Hotyieldtest
Impacttestatdifferenttemperatures
Bendingtest
Flaringtest
Ringtensiletest
Ringbendingtest
Ringflaringtest
Hardnesstest
Spectralanalysis
PositiveMaterialIdentification(PMI)test
Non-destructive testing includes:
Ultrasonictest
MagneticParticleExamination(MPE)test
PMItest
Ferritetest
EddyCurrenttest
Materialscanalsobeinspectedpriortobeingshipped.Thiscanbedonebyaninspectorfromourowninspectiondepartment,by
the customer or by an independent inspection body.
d. Customer-dedicated Inventories
We service all of our customers from our general inventories maintained at various sites around the world. But in some cases
we also manage specific inventories reserved for a single customer only, based on that customers projected purchasing
requirements.Thisassuresourcustomersofsufficientmaterialswithouthavingtomaintainextensiveinventoriesthemselves.
Thisserviceisparticularlyappropriateforcustomerswhospecializeinstandardproduction(theso-calledOriginalEquipment
Manufacturers).Customer-specificinventoriesarealsomaintainedforlargeprojects.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 11
-
Technical information for pipes and tubes
Technical information
1 General factors for conversion
General factors for conversion From metric to imperial multiply
Pressure and stress
Energy Sundry conversion factors
Joule=Nm kgf/m ft/lb cal
Joule=N/m 1 0,102 0,737 0,239
kgf/m 9,807 1 7,233 2,342
ft/lb 1,356 0,138 1 0,324
cal 4,19 0,427 3,090 1
Contents - Inhoud
1 barrel 159 litres
1 UK gal 4,55 litres
1 US gal 3,785 litres
Volume
1 in3 16,3871 cm3
1 yd3 0,7646 m3
1 ft3 0,0283 m3
Weight/mass - Gewichten/massa
1 lb 0,454 kg
1 cwt 50,80 kg
1 (long) ton 1016 kg
1 short ton 907,2 kg
Area - Oppervlakte
1 in2 6,45 cm2
1 ft2 0,0929 m2
1 yd2 0,836 m2
1 acre 4047 m2
1 sq. mile 2,5899 km2
Lengths - Lengtematen
1 inch 25,4 mm 0,0254 m
1 foot 304,8 mm 0,3048 m
1 yard 914,4 mm 0,9144 m
1 mile 1609 m 1,609 km
1 nautical mile 1852 m 1,852 km
Contents - Inhoud
ltr x 0,0063 barrel
ltr x 0,22 UK gal
ltr x 0,2642 US gal
Volume
cm3 x 0,06102 in3
m3 x 35,3147 ft3
m3 x 1,3079 yd3
Weight/mass - Gewichten/massa
1 kg x 2,2046 lb
1 kg x 0,0197 cwt
1 kg x 0,0009842 (long) ton
1 kg x 0,0011023 short ton
Area - Oppervlakte
cm2 x 0,155 in2
m2 x 10,764 ft2
m2 x 1,196 yd2
m2 x 0,0002471 acre
km2 x 0,386 sq. mile
Lengths - Lengtematen
1 mm 0,0394 inch
1 m 3,2808 ft
1 m 1,0936 yd
1 km 0,6215 mile
1 km 0,5399 nautical mile
N/m2=Pa N/mm2=MPa Bar Atm=kgf/cm2 kgf/mm2 lb/in2 (psi) Ksi
N/m2 = Pa 1 10-6 10-5 10,2 x 10-6 0.102 x 10-6 145,0 x 10-6 0,145
N/mm2 = Mpa 106 1 10 10,2 0,102 145,0 0,145 x 106
Bar 105 0,10 1 1,02 0,0102 14,5 0,145 x 105
atm = kgf/cm2 98070 0,09807 0,9807 1 0,01 14,22 0,01422
kgf/mm2 9,807 x 106 9,807 98,07 100 1 1422 1,422
lb/in2 (psi) 6895 6895 x 10-6 6895 x 10-5 0,0703 703 x 10-6 1 10-3
KSI 6,895 x 106 6,895 0,6895 x 10-5 70,3 0,703 x 10-6 1000 1
1 km/ltr = 2,8225 mpg 1 mpg = 0,3536 km/ltr
1kg = 0,1573 stone 1 stone = 6,3503 kg
1kg/m = 0,67197 lb/ft 1 lb/ft = 1,4882 kg/m
12 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Technical information for pipes and tubes
3 Overview most important Euronorms for pipe and tube
Execution Norm Steel grade
Welded DIN 1626 St.37.0
Welded DIN 1626 St.52.0
Welded BS 3059-1 ERW 320
Seamless DIN 1629 St.37.0
Seamless DIN 1629 St.52.0
Seamless DIN 17175 St.35.8/1
Seamless ASTM A106* Grade B
Seamless ASTM A333* Grade 6
Execution Norm Steel grade
Welded EN 10217-1 P235 TR2
Welded EN 10217-3 P355N
Welded EN 10217-2 P195 GH
Seamless EN 10216-1 P235 TR2
Seamless EN 10216-3 P355N
Seamless EN 10216-2 P235 GH
Seamless EN 10216-2 P265 GH
Seamless EN 10216-4 P265NL
Pipes for pressure applications
* API and ASTM standards will remain valid and will not be replaced by Euronorms in the near future
Execution Norm Steel grade
Welded DIN 17120 St.37.2
Welded DIN 17120 St.52.3
Seamless DIN 17121 St.37.2
Seamless DIN 17121 St.52.3
Execution Norm Steel grade
Welded EN 10219-1/2 S235 JRH
Welded EN 10219-1/2 S355 J2H
Seamless EN 10210-1/2 S235 JRH
Seamless EN 10210-1/2 S355 J2H
Pipes for construction applications
Execution Norm Steel grade
Welded API 5L* Grade B
Welded API 5L* Grade X52
Seamless API 5L* Grade B
Seamless API 5L* Grade X52
Execution Norm Steel grade
Welded EN 10208-2 L245NB
Welded EN 10208-2 L360NB
Seamless EN 10208-2 L245NB
Seamless EN 10208-2 L360NB
Pipes for pipeline applications
Execution Norm Steel grade
Hollow bar ISO 2938 20MnV6
Seamless DIN 17121 St.52.3
Execution Norm Steel grade
Hollow bar EN 10294-1 E470
Seamless EN 10297-1 E355
Pipes for mechanical applications
Execution Norm Steel grade
Welded DIN 2394 RSt.34-2
Welded DIN 2395 St.33
Welded DIN 2395 St.37.2
Execution Norm Steel grade
Welded EN 10305-3 E195+CR2
Welded EN 10305-5 E190+CR1
Welded EN 10305-5 E235+CR1
Pipes for precision applications
Old New
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 13
-
Technical information for pipes and tubes
3 Standards and steel qualities
a. Notes to the Euronorms and associated steel qualities for seamless pipes
The standards used in the past such as the DIN 17121, DIN 1629, DIN 2448 and the DIN 17175 have since been mostly replaced by
Euronorms. The Euronorms clearly distinguish the pipes area of application. Consequently different standards now exist for pipes
used as construction materials, pipelines or for mechanical engineering applications.
This distinction was not as clear in the past. For example, the old St.52.0 quality was derived from the DIN 1629 standard which
was intended for pipeline systems and mechanical engineering applications. This quality was also often used for steel structures,
however.
The information below explains the main standards and steel qualities under the new system of standards.
Seamless circular pipes and tubes for pressure applicationsThe EN 10216 Euronorm replaces the old DIN 17175 and 1629 standards. This standard is designed for pipes used in pressure
applications, such as a pipeline. This is why the associated steel qualities are designated by the letter P for Pressure. The
value that follows this letter designates the minimum yield strength. The subsequent letter designations provide additional
information.
The EN 10216 comprises several parts. The parts that are relevant to us are as follows:
EN 10216 Part 1: non-alloy pipes with specified properties at room temperature
EN 10216 Part 2: non-alloy pipes with specified properties at higher temperatures
EN 10216 Part 3: alloy pipes made from fine-grained steel for any temperature
Some examples:
a. EN 10216-1, Quality P235TR2 (formerly DIN 1629, St.37.0)
P = Pressure
235 = minimum yield strength in N/mm2
TR2 = quality with specified properties relating to aluminum content, impact values and inspection and test requirements. (In
contrast to TR1, for which this is not specified).
b. EN 10216-2, Quality P235 GH (formerly DIN 17175, St.35.8 Cl. 1, boiler pipe)
P = Pressure
235 = minimum yield strength in N/mm2
GH = tested properties at higher temperatures
c. EN 10216-3, Quality P355 N (more or less equivalent to DIN 1629, St.52.0)
P = Pressure
355 = minimum yield strength in N/mm2
N = normalized*
* Normalized is defined as: normalized (warm) rolled or standard annealing (at a min temperature of 930C). This applies to all
qualities designated by the letter N in the new Euro Standards.
14 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Technical information for pipes and tubes
Seamless circular pipes and tubes for the mechanical engineering and machining industryThe EN 10297 Euronorm is specifically designed for these applications. The standard consequently replaces the more general DIN
17121 standard used in the past. The pipes are primarily used in the mechanical engineering and hydraulics sector, where the
pipes are treated, turned, milled, etc. The steel quality designations therefore start with the letter E for Engineering.
Some examples:
a. EN 10297, Quality E355+AR (formerly DIN 17121, St.52.3)
E = Engineering
355 = minimum yield strength in N/mm2
AR = as rolled, with no further heat treatment
b. EN 10297, Quality E355+N (formerly DIN 17121, St.52.3N)
E = Engineering
355 = minimum yield strength in N/mm2
N = normalized (hot-formed or normally annealed)
There is another Euronorm in this area, specifically designed for the machining industry: EN 10294. This standard is used for
machine engineering steel that in the past was designated as 20MnV6, MW 450 or Mecaval 147M, for example. The common
quality designation according to this standard is E 470. This steel quality offers several advantages over the E355+N making it even
more suitable for turning, such as more precise tolerances, more homogeneous steel quality, higher tensile strength and reduced
eccentricity.
Seamless circular pipes and tubes for construction applicationsThe EN 10210 Euronorm was developed some time ago and aside from its application to circular pipes, also applies to square and
rectangular hot-formed hollow sections. This standard was specifically developed for steel construction applications. The steel
quality is therefore designated with the letter S for Structural.
An example:
EN 10210, Quality S355 J2H (formerly DIN 17121, St.52.3N)
S = Structural
355 = minimum yield strength in N/mm2
J2 = minimum average impact value: 27 Joules at -20C
H = Hollow section
This quality replaces the former St.52.3N quality. This does not imply, however, that the pipes are always annealed. The mill is
required to guarantee that the required mechanical properties are attained. Depending on the mills production process and the
pipes wall thickness, post-annealing may or may not be required.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 15
-
Technical information for pipes and tubes
b. Notes to the Euro Standards and associated steel qualities for welded pipes
The DIN 1626, 17120 and DIN 2394 standards used in the past have since been mostly dropped and replaced by Euronorms.
The Euronorms clearly distinguish the pipes area of application. Consequently different standards now exist for pipes used as
construction materials and pipelines or in applications requiring precision materials.
This distinction was not as clear in the past. The former DIN 1626, St.37.0 quality for pipelines was at times also used for steel
structures. The most important Euronorms and steel qualities are highlighted below.
Welded cicrular pipes and tubes for pressure applicationsThe EN 10217 Euro Standard replaces the old DIN 1626 standard. This standard is designed for welded pipes used in pressure
applications, such as pipelines. This is why the associated steel qualities are designated by the letter P for Pressure. The value that
follows this letter designates the minimum yield strength. The subsequent letter designations provide additional information.
The EN 10217 comprises several parts. The parts that are relevant to us are as follows:
EN 10217 Part 1: non-alloy pipes with specified properties at room temperature
EN 10217 Part 2: alloy and non-alloy pipes with specified properties at higher temperatures
EN 10217 Part 3: alloy pipes made of fine-grained steel
Some examples:
a. EN 10217-1, Quality P235TR2 (formerly DIN 1626, St.37.0)
P = pressure
235 = minimum yield strength in N/mm2
TR2 = quality with specified properties relating to aluminum content, impact values and inspection and test requirements.
(In contrast to TR1, for which this is not specified).
b. EN 10217-2, Quality P195 GH (now still: BS 3059, ERW 320)
P = Pressure
195 = minimum yield strength in N/mm2
GH = properties at higher temperatures
c. EN 10217-3, Quality P355N (formerly DIN 1626, St.52.0)
P = Pressure
355 = minimum yield strength in N/mm2
N = normalized*
* Normalized is defined as: normalized (hot) rolled or normally annealed (at a min temperature of 930C). This applies to all
qualities designated by the letter N in the new Euronorms.
16 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Technical information for pipes and tubes
Welded cicrular pipes and tubes for construction applicationsThe EN 10210, as well as the EN 10219 standard can be used for circular pipes and tubes used in construction applications. The
only difference between these two standards is that the EN 10210 applies to hot-formed pipes and the EN 10219 applies to cold-
formed pipes. The manufacturing process is at the discretion of the producer. In actual practice, cold-formed pipes manufactured
according to EN 10219 are almost always welded. Hot-formed pipes manufactured according to EN 10210 are available in seamless,
as well as welded versions. The materials for these standards are designated using the letter S for Structural Steel.
Both standards comprise 2 parts. Part 1 contains the technical delivery conditions and Part 2 contains the dimensions, tolerances
and static values.
Some examples:
a. EN 10210 / 10219-1/2, S235JRH (formerly DIN 17120, St.37-2)
S = Structural
235 = minimum yield strength in N/mm2
JR = specified impact values at room temperature
H = hollow section (in this case a round hollow section)
b. EN 10210 / 10219-1/2, S355J2H (formerly DIN 17120, St.52.3)
S = Structural
355 = minimum yield strength in N/mm2
J2 = specified impact values at -20C
H = hollow section (in this case a round hollow section)
Welded circular precision pipes and tubesThe DIN 2394 was the usual standard for this application. This standard has been or will shortly be replaced by the EN 10305. This
standard comprises 6 parts, focused on specific uses (hydraulics, pneumatics) or manufacturing processes (cold-drawn, welded,
seamless) or shape (circular or square-rectangular). Only Part 3 applies to our product portfolio: welded and calibrated circular
pipes and tubes for precision applications. Precision pipes are generally used in the hydraulics and pneumatics sectors and the
steel qualities are therefore designated with the letter E for Engineering.
An example:
EN 10305-3, E235+CR1 (formerly: DIN 2394, RSt.34-2)
E = Engineering
235 = minimum yield strength in N/mm2
CR1 = suitable for post-annealing (in contrast to CR2)
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 17
-
Technical information for pipes and tubes
Nominal
pipe size
inches
O.D.
mm
Standard
STD
Wall
Standard
STD
Wt
Extra strong
XS
Wall
Extra strong
XS
Wt
Double
extra strong
XXS
Wall
Double
extra strong
XXS
Wt
Schedule
10
Wall
Schedule
10
Wt
Schedule
20
Wall
Schedule
20
Wt
Schedule
30
Wall
Schedule
30
Wt
1/8 10,3 1,7 0,357 2,4 0,470
1/4 13,7 2,2 0,625 3,0 0,804
3/8 17,1 2,3 0,848 3,2 1,10
1/2 21,3 2,8 1,26 3,7 1,62 7,5 2,54
3/4 26,7 2,9 1,68 3,9 2,19 7,8 3,63
1 33,4 3,4 2,50 4,5 3,23 9,1 5,45
1.1/4 42,2 3,6 3,38 4,9 4,46 9,7 7,75
1.1/2 48,3 3,7 4,05 5,1 5,40 10,2 9,54
2 60,3 3,9 5,43 5,5 7,47 11,1 13,4
2.1/2 73 5,2 8,62 7,0 11,4 14 20,4
3 88,9 5,5 11,3 7,6 15,3 15,2 27,7
3.1/2 101,6 5,7 13,6 8,1 18,6 16,2 34
4 114,3 6 16,1 8,6 22,3 17,1 41,1
5 141,3 6,6 21,8 9,5 30,9 19 57,4
6 168,3 7,1 28,2 11,0 42,5 21,9 79,1
8 219,1 8,2 42,5 12,7 64,6 22,2 108 6,4 33,3 7 36,7
10 273 9,3 60,2 12,7 81,5 25,4 155 6,4 41,7 7,8 50,9
12 323,9 9,5 73,8 12,7 97,4 25,4 187 6,4 49,7 8,4 65,1
14 355,6 9,5 81,2 12,7 107 6,4 54,6 7,9 68,1 9,5 81,2
16 406,4 9,5 93,1 12,7 123 6,4 62,6 7,9 77,9 9,5 93,1
18 457,2 9,5 105 12,7 139 6,4 70,5 7,9 87,8 11,1 122
20 508 9,5 117 12,7 155 6,4 78,5 9,5 117 12,7 155
22 558,8 9,5 129 12,7 171 6,4 86,4 9,5 129 12,7 171
24 609,6 9,5 141 12,7 187 6,4 94,7 9,5 141 14,3 210
26 660,4 9,5 153 12,7 203 7,9 128 12,7 203
28 711,2 9,5 165 12,7 219 7,9 138 12,7 219 15,9 272
30 762 9,5 176 12,7 234 7,9 147 12,7 234 15,9 292
32 812,8 9,5 188 12,7 250 7,9 157 12,7 250 15,9 312
34 863,6 9,5 200 12,7 266 7,9 167 12,7 266 15,9 332
36 914,4 9,5 212 12,7 282 7,9 177 12,7 282 15,9 351
4 Pipe schedules and wall thicknesses in inch/mm and weights
ASME B 36.10 PIPE SCHEDULES
Wall = Wallthickness in millimeters
WT = Weights in kilogram per meter
18 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Technical information for pipes and tubes
Nominal
pipe size
O.D.
mm
Schedule
40
Wall
Schedule
40
Wt
Schedule
60
Wall
Schedule
60
Wt
Schedule
80
Wall
Schedule
80
Wt
Schedule
100
Wall
Schedule
100
Wt
Schedule
120
Wall
Schedule
120
Wt
Schedule
140
Wall
Schedule
140
Wt
Schedule
160
Wall
Schedule
160
Wt
1/8 10,3 1,7 0,357 2,4 0,470
1/4 13,7 2,2 0,625 3,0 0,804
3/8 17,1 2,3 0,848 3,2 1,10
1/2 21,3 2,8 1,26 3,7 1,62 4,8 1,9
3/4 26,7 2,9 1,68 3,9 2,19 5,6 2,89
1 33,4 3,4 2,50 4,5 3,23 6,4 4,23
1.1/4 42,2 3,6 3,38 4,9 4,46 6,4 5,6
1.1/2 48,3 3,7 4,05 5,1 5,40 7,1 7,23
2 60,3 3,9 5,43 5,5 7,47 8,7 11,1
2.1/2 73 5,2 8,62 7,0 11,4 9,5 14,9
3 88,9 5,5 11,3 7,6 15,3 11,1 21,3
3.1/2 101,6 5,7 13,6 8,1 18,6
4 114,3 6 16,1 8,6 22,3 11,1 28,3 13,5 33,5
5 141,3 6,6 21,8 9,5 30,9 12,7 40,2 15,9 49,0
6 168,3 7,1 28,2 11,0 42,5 14,3 54,2 18,3 67,5
8 219,1 8,2 42,5 10,3 53,1 12,7 64,6 15,1 75,8 18,3 90,7 20,6 101 23,0 112
10 273 9,3 60,2 12,7 81,5 15,1 95,8 18,3 115 21,4 133 25,4 156 28,6 172
12 323,9 10,3 79,7 14,3 109 17,4 132 21,4 160 25,4 187 28,6 208 33,3 239
14 355,6 11,1 94,3 15,1 126 19,0 158 23,8 195 27,8 224 31,8 253 35,7 281
16 406,4 12,7 123 16,7 160 21,4 203 26,2 245 30,9 286 36,5 333 40,5 365
18 457,2 14,3 156 19 206 23,8 254 29,4 310 34,9 363 39,7 408 45,2 459
20 508 15,1 183 20,6 248 26,2 311 32,5 381 38,1 441 44,4 508 50,0 564
22 558,8 22,2 294 28,6 373 34,9 451 41,3 526 47,6 600 54,0 671
24 609,6 17,4 255 24,6 355 30,9 441 38,9 547 46,0 639 52,4 719 59,5 807
26 660,4
28 711,2
30 762
32 812,8
34 863,6
36 914,4
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 19
-
Product descriptions for pipes and tubes
Product descriptions
VL Code Norm Steel grade Product description
110 EN 10216-1 / EN 10210-1 P235 TR2 / S235 JRH Seamless steel normal wall tubes according to EN 10216-1 steel grade P235 TR2
and to EN 10210-1 steel grade S235 JRH with AD-W4 requirements, pressure
tested, with plain ends. Sizes with OD 51 mm paint stencilled with heat
number. If desired with inspection certificate to EN 10204/3.1. Ditto, but outside
shotblasted SA 2,5 and painted, without heat number.
113 EN 10216-2 / DIN 2448 P235 GH / St.35.8 Class I Seamless steel boiler tubes according to EN 10216-2 steel grade P235 GH or DIN
2448 steel grade St.35.8 Class I to DIN 17175 TRD 102 and AD-W4, pressure
tested, with plain ends. Sizes with OD 26,9 mm also stamped with heat number.
If desired with inspection certificate to EN 10204/3.1.
120 EN 10216-1 P235 TR2 Seamless heavy wall tubes according to EN 10216-1 steel grade P235 TR2 and
EN 10210-1, steel grade S235 JRH, with AD-W4, pressure tested, with plain
ends. Sizes with OD 51 mm paint stencilled with heat number. If desired with
inspection certificate to EN 10204/3.1.
125 EN 10210-1 / EN 10297-1 S355 J2H / E355 Seamless heavy wall tubes according to EN 10210-1 steel grade S355 J2H and
EN 10297-1, steel grade E355. Pressure tested, with plain ends. Impact tested at
-20 C, for wall thicknesses 6 mm. Outside paint stencilled with heat number.
If desired with inspection certificate to EN 10204/3.1.Dimension range up to and
incl. 168,3 mm OD.
126 EN 10210-1 / EN 10297-1 S355 J2H / E355 Ditto, however dimension range from OD 177,8 mm up to and incl. 406,4 mm.
127 EN 10210-1 / EN 10297-1 S355 J2H / E355 Ditto, however dimension range > 406,4 mm OD.
126 DIN 17121 MW 450 (20MnV6) Seamless steel heavy wall tubes according to DIN 17121, steel grade MW450
(20MnV6) to material sheet 03R/05.93. Normalised and impact tested at -20 C
to DIN 17121. Eddy Current tested to SEP 1925, with plain ends. Outside paint
stencilled with heat number. If desired with inspection certificate to EN 10204/3.1.
Dimension range from OD 177,8 mm up to and incl. 406,4 mm.
127 EN 10210-1 / DIN 1629 S355 J2H / St.52.0 Seamless heavy wall tubes according to EN 10210-1 steel grade S355 J2H and DIN
1629 steel grade St.52.0 with AD-W4. Pressure tested and impact tested at -20
C, with plain ends. Outside paint stencilled with heat number. If desired with
inspection certificate to EN 10204/3.1. Dimension range > 406,4 mm OD.
1 Seamless steel pipes and tubes
VL codes 110 up to and incl. 181
20 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Product descriptions for pipes and tubes
VL Code Norm Steel grade Product description
140 A/SA 106 Gr. B Seamless steel pipes according to ASTM A-106/SA-106 grade B and ASTM A530/
ASME SA 530 with additional requirements to ASME section II part D table Y1,
NACE MR 0175 and NACE 1030. C-content max. 0,22%, C-equivalent max. 0,41%
as per long formula, outside oiled. Sizes with OD 26,7 mm stamped with round
nose tools with heat number, steel grade, dimension and mill symbol. Sizes with
OD 60,3 mm with bevelled ends to A106 par. 19.1.2 note 9 (30 -0/+5), however
with plain ends for wall thickness 25,4 mm. If desired with inspection certificate
to EN 10204/3.1.
150 ASTM/ASME
A-SA333
Gr.6 / LT45 Seamless steel pipes according to ASTM A-333M/SA-333M grade 6 LT 45 with
additional requirements to ASME section II part A, NACE MR 0175 and NACE 1030,
pressure tested to norm. Pipes normalised as per fine grain practice with a grain
size of min. 6 to ASTM E 112. C-content max. 0,20%, C-equivalent max. 0,41% as
per long formula, with impact test Charpy V notch at -45 C (average value min. 27
Joule), outside oiled. Sizes with OD 26,7 mm stamped with round nose tools
with heat number, steel grade, dimension and mill symbol. Sizes with OD 60,3
mm with bevelled ends to ANSI B16.25 fig. 2a/3a, however with plain ends for wall
thickness 25,4 mm. If desired with inspection certificate to EN 10204/3.1.
170 API Spec. 5L
ASTM/ASME
A-SA106
Gr. B
Gr. B
Seamless steel pipes according to API Spec. 5L grade B /ASTM A-106/ASTM
A530 / ASME SA-106/SA530 Grade B to ASME section II part A, with additional
requirements to NACE MR 0175 and NACE 1030. Pressure tested as per API 5L jan.
2000 PSL 1 and A-SA 530. C-content max. 0,22%, C-equivalent max. 0,41% as per
long formula, outside oiled. Sizes with OD 26,7 mm stamped with round nose
tools with heat number, steel grade, dimension, mill symbol and API monogram.
Sizes with OD 60,3 mm with bevelled ends to A106 par. 19.1.2 note 9 (30
-0/+5), however with plain ends for wall thickness 25,4 mm. If desired with
inspection certificate to EN 10204/3.1.
174 API /A/SA 106 Grade B galvanised
threaded & coupl.
Seamless steel tubes according to API Spec. 5L / ASTM A 106 grade B, with
threaded and coupled ends as per API 5L, hot-dipped galvanised to ASTM A53,
pressure tested to the norm. If desired with inspection certificate to EN 10204/3.1.
181 EN 10294-1 E 470AR Seamless hollow bar according to EN 10294-1, steel grade A470 AR (as rolled).
Tubes are especially suitable for machining. With plain ends. If desired with
inspection certificate to EN 10204/3.1.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 21
-
Product descriptions for pipes and tubes
2 Welded steel pipes and tubes
VL codes 210 up to and incl. 430
VL Code Norm Steel grade Product description
210 EN 10217-1 P235 TR1 grooved Welded normal wall steel tubes according to EN 10217-1, steel grade P235 TR1, black, not
oiled, with a groove for a groove coupling system
211 EN 10219-1/2
greenhouse tube
S185 / S235 JRH Welded light wall steel tubes (greenhouse tubes) according to EN 10219-1, steel grade
S185 or S235 JRH, leak tested, with plain ends. If desired with test report to EN 10204/2.2.
Execution black or electrolytic zinc plated
211 EN 10219-1/2
DIN 1626
S235 JRH /
St.37.0
Welded light wall steel tubes according to EN 10219-1 steel grade S235 JRH or to DIN
1626 steel grade St.37.0. Leak tested, with plain ends. If desired with test report to EN
10204/2.2.
212 EN 10219-1/2 S235 JRH Welded heavy wall steel tubes up to and incl. OD 127 mm, according to EN 10219-1,
material grade S235 JRH. Leak tested, with plain ends. If desired with test report to EN
10204/2.2.
212 DIN 1626 /
EN 10219-1
St.37.0 Welded heavy wall steel tubes > OD 127 mm, according to EN 10219-1 material grade
S235 JRH or DIN 1626 steel grade St.37.0. Leak tested as per DIN 1626, with plain ends. If
desired with test report to EN 10204/2.2.
213 EN 10219-1/
DIN 1626
S235 JRH /
St.37.0
Welded normal wall steel tubes according to EN 10219-1 steel grade S235 JRH or to DIN
1626 steel grade St.37.0, leak tested, with plain ends. If desired with test report to EN
10204/2.2. Also in coated execution: shotblasted and painted or painted only.
217 EN 10219-1/2 S355 J2H Welded heavy wall tubes according to EN 10219-1, steel grade S355 J2H, impact tested at
-20 C. If desired with inspection certificate to EN 10204/3.1.
219 BS 3059-1 ERW 320 HF longitudinally welded steel boiler tubes according to BS 3059/87 part 1, steel grade
ERW 320 or to EN 10217-2 steel grade P195 GH, weld efficiency factor V=1, internal weld
seam removed, normalised, tensile strength max. 440 N/mm. Leak tested to the norm,
with plain ends covered with plastic caps. If desired with inspection certificate to EN
10204/3.1.
220 EN 10255 S195T / Poly 3 Plus Welded steel gaspipes according to EN 10255 steel grade S195T. Pressure tested at 50
bar or Eddy Current tested to EN 10246-1. Outside shotblasted SA 2,5 and coated with
polyethylene, colour yellow, layer thickness min. 1,8 mm (Install Poly 3 Plus), with plain
ends or threaded and coupled ends, provided with KIWA Gastec marking.
230 EN 10255 S195T gas Welded steel gaspipes according to EN 10255, steel grade S195T. Pressure tested at 50
bar or Eddy Current tested to EN 10246-1. Execution black or hot-dipped galvanised. Ends
plain or threaded and coupled.
231 EN 10219-1/2
EN 10210-1/2
S235 JRH
construction
Welded steel construction pipes according to EN 10210/10219-1/2, steel grade S235 JRH,
execution black or hot-dipped galvanised. Ends plain or threaded and coupled.
231 EN 10255
Type L2
S195T
Class A
Welded steel pipes type L2 according to EN 10255, steel grade S195T. Pressure tested at
50 bar or Eddy Current tested to EN 10246-1. Execution black, hot-dipped galvanised or
electrolytic zinc plated to EN 10240. Ends plain or threaded and coupled.
22 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Product descriptions for pipes and tubes
VL Code Norm Steel grade Product description
232 EN 10219 S235 JRH Welded steel pipes according to EN 10219-1, steel grade S235 JRH, not leak tested, black,
with plain ends
232 EN 10255 S195T Welded steel gaspipes according to EN 10255, steel grade S195T, cold formed, leak tested,
hot-dipped galvanised, with plain ends
233 EN 10219 S235 JRH Welded steel pipes according to EN 10219-1, steel grade S235 JRH, not leak tested, black,
with plain ends
233 EN 10255 S195T Welded steel pipes Type L2 according to EN 10255, steel grade S195T, cold formed, leak
tested, hot-dipped galvanised, with plain ends
239 EN 10255 medium S195T (INSTALL) Welded steel gaspipes (INSTALL medium) according to EN 10255, steel grade S195T. Pres-
sure tested at 50 bar or Eddy Current tested to EN 10246-1. Execution black, hot-dipped
galvanised, electrolytic zinc plated, shotblasted and painted or painted only. Ends plain or
threaded and coupled.
239 EN 10255 heavy S195T (INSTALL) Welded steel steampipes (INSTALL heavy) according to EN 10255, steel grade S195T. Pres-
sure tested at 50 bar or Eddy Current tested to EN 10246-1. Execution black or electrolytic
zinc plated, with plain ends.
271 API Spec. 5L Gr. B In- and outside submerged arc longitudinally welded pipes (SAW) according to API 5L grade
B, with additional requirements to NACE MR 0175. C-content max. 0,22%, C-equivalent max.
0,41% as per long formula. Weld efficiency factor V=1. Pressure tested to the norm, with bevel-
led ends, stamped with heat number, if desired with inspection certificate to EN 10204/3.1.
280 API Spec. 5L
ASTMA 53
Gr.B / X42 /
A53
Electric resistance welded pipes (ERW) according to API 5L PSL 1 grade B / X42 / ASTM
A53M type E grade B, with additional requirements to NACE MR 0175, pressure test based
on grade X42, weld efficiency factor V=1, weld seam annealed. C-content max. 0,22%,
C-equivalent max. 0,41% as per long formula, with bevelled ends. Outside stamped
with heat number, steel grade, mill name and API monogram. If desired with inspection
certificate to EN 10204/3.1.
281 API Spec. 5L /
EN 10217 /
EN 10219
Gr.B /
P265TR2 /
S275J0H
Electric resistance welded pipes (ERW) according to API 5L PSL 1 grade B, to EN 10217
steel grade P265 TR2 and to EN 10219 steel grade S275J0H, with additional requirements
to NACE MR 0175 and MR 0103. C-content max. 0,22%, C-equivalent max. 0,41% as per
long formula, with bevelled ends. Outside stamped with heat number, steel grade, mill
name and API monogram. If desired with inspection certificate to EN 10204/3.1.
290 DIN 2394 St.34.2 KB Welded steel precision tubes according to DIN 2394, cold formed, from cold rolled strip,
steel grade St.34-2, execution BKM (bright), with plain ends
290 DIN 2394 St.34.2 Welded steel precision tubes according to DIN 2394, cold formed, from hot rolled un-
pickled strip, steel grade St.34-2, execution M, with plain ends
290 DIN 2394 St.34.2 GWB Welded steel precision tubes according to DIN 2394, cold formed, from hot rolled pickled
strip, steel grade St.34-2, execution BKM (bright), with plain ends
295 DIN 2394 LEBU heating pipes St.34-2 Welded steel LEBU heating pipes according to DIN 2394, execution BKM (bright), high
gloss electrolytic zinc plated, with plain ends
430 EN 39 EN 39 Welded steel scaffolding tubes, steel grade and tolerances according to EN 39, hot-dipped
galvanised as per EN 10240 table 2, steel grade B2, with plain, deburred ends.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 23
-
Pipes and Tubes
Pipes and Tubes
24 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Pipes and Tubes
Delivery programme pipes and tubesDimensions and weights
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
2004 12 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.271
2006 12 1 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.271
2319 13 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.296
2328 13 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.425
2491 13.7 2.35 1/4 230 EN 10255 M bl not oil plain 6 0.650
2718 15 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.345
2721 15 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6/10 0.408
92240 15 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.408
2722 15 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.499
2724 15 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.499
2970 16 1.2 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.438
3003 16 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.536
3008 16 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.691
23331 17.2 1.8 3/8 231 EN 10255 L2 galvanized plain 6 0.714
33741 17.2 1.8 3/8 231 EN 10255 L2 bl not oil plain 6 0.674
6404 17.2 2.35 3/8 230 EN 10255 M bl not oil plain 6 0.852
6406 17.2 2.35 3/8 230 EN 10255 M galvanized plain 6 0.903
6405 17.2 2.35 3/8 239 EN 10255 M Install bl not oil plain 6 0.852
6408 17.2 2.35 3/8 239 galvanized plain 6 0.903
6409 17.2 2.35 3/8 239 shbl paint plain 6 0.852
6413 17.2 2.35 3/8 239 galvanized T and C 6 0.909
68993 17.2 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.020
3326 18 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.419
36265 18 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.497
3342 18 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.610
3391 19 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.444
3394 19 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.647
3397 19 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.838
4010 20 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.684
4027 20 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.888
68997 20 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.220
68999 20 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.580
69000 20 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.850
4270 21.3 2 110 EN 10216-1 P235TR2 bl not oil plain SRL 0.952
4271 21.3 2 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 0.952
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 25
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
23332 21.3 2 1/2 231 EN 10255 L2 galvanized plain 6 1.020
24550 21.3 2 1/2 231 EN 10255 L2 bl not oil plain 6 0.952
142592 21.3 2 1/2 233 EN 10219 S235JRH bl not oil plain 6 0.952
4272 21.3 2.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.200
1832 21.3 2.65 1/2 220 poly plain 6 1.220
1838 21.3 2.65 1/2 230 EN 10255 M bl not oil plain 6 1.220
1841 21.3 2.65 1/2 230 EN 10255 M galvanized plain 6 1.270
85198 21.3 2.65 1/2 232 EN 10255 M CF galvanized plain 6 1.270
1840 21.3 2.65 1/2 239 EN 10255 M Install bl not oil plain 6 1.220
1842 21.3 2.65 1/2 239 EN 10255 M Install el zinc pl plain 6 1.220
1843 21.3 2.65 1/2 239 galvanized plain 6 1.270
1844 21.3 2.65 1/2 239 shbl paint plain 6 1.220
1847 21.3 2.65 1/2 239 EN 10255 M Install bl not oil T and C 6 1.230
1849 21.3 2.65 1/2 239 galvanized T and C 6 1.300
1850 21.3 2.65 1/2 239 shbl paint T and C 6 1.230
4275 21.3 2.8 1/2 STD 150 A333 A333/6LT45 bl oiled plain SRL 1.270
4276 21.3 2.8 1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.270
75176 21.3 2.8 1/2 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.270
4277 21.3 2.8 1/2 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.350
4280 21.3 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.430
1852 21.3 3.25 1/2 239 EN 10255 H Install bl not oil plain 6 1.450
4284 21.3 3.7 1/2 XS 150 A333 A333/6LT45 bl oiled plain SRL 1.620
4285 21.3 3.7 1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.620
75142 21.3 3.7 1/2 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.620
4286 21.3 3.7 1/2 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.700
69005 21.3 4 1/2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.710
73882 21.3 4.8 1/2 S160 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 1.950
69006 21.3 5 1/2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.010
34549 21.3 7.5 1/2 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 2.550
4448 22 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6/10 0.616
92241 22 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.616
4453 22 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.758
4454 22 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.758
4459 22 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.986
4824 25 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.869
4831 25 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.134
69010 25 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.580
4846 25 3 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.628
67711 25 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.070
67716 25 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.910
4892 25.4 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.884
4895 25.4 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.150
26 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
4914 26 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.180
4971 26.7 2.9 3/4 STD 150 A333 A333/6LT45 bl oiled plain SRL 1.690
4972 26.7 2.9 3/4 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.690
75143 26.7 2.9 3/4 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.690
4973 26.7 2.9 3/4 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.770
4980 26.7 3.9 3/4 XS 150 A333 A333/6LT45 bl oiled plain SRL 2.200
4981 26.7 3.9 3/4 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 2.200
75144 26.7 3.9 3/4 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 2.200
4982 26.7 3.9 3/4 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 2.320
73883 26.7 5.6 3/4 S160 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 2.900
34550 26.7 7.8 3/4 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 3.640
5026 26.9 2.3 110 EN 10216-1 P235TR2 bl not oil plain SRL 1.400
5027 26.9 2.3 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.400
6105 26.9 2.35 3/4 231 EN 10255 L2 bl not oil plain 6 1.410
6109 26.9 2.35 3/4 231 EN 10255 L2 galvanized T and C 6 1.500
31765 26.9 2.35 3/4 231 EN 10255 L2 galvanized plain 6 1.470
54329 26.9 2.35 3/4 233 EN 10219 S235JRH bl not oil plain 6 1.420
5028 26.9 2.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.560
6100 26.9 2.65 3/4 220 poly plain 6 1.580
6110 26.9 2.65 3/4 230 EN 10255 M bl not oil plain 6 1.580
6112 26.9 2.65 3/4 230 EN 10255 M galvanized plain 6 1.650
85199 26.9 2.65 3/4 232 EN 10255 M CF galvanized plain 6 1.650
6111 26.9 2.65 3/4 239 EN 10255 M Install bl not oil plain 6 1.580
6113 26.9 2.65 3/4 239 EN 10255 M Install el zinc pl plain 6 1.580
6114 26.9 2.65 3/4 239 galvanized plain 6 1.650
6115 26.9 2.65 3/4 239 shbl paint plain 6 1.580
6118 26.9 2.65 3/4 239 EN 10255 M Install bl not oil T and C 6 1.590
6120 26.9 2.65 3/4 239 galvanized T and C 6 1.690
6121 26.9 2.65 3/4 239 shbl paint T and C 6 1.590
67718 26.9 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.720
5031 26.9 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.870
6123 26.9 3.25 3/4 239 EN 10255 H Install bl not oil plain 6 1.900
5033 26.9 4 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.260
69013 26.9 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.260
69014 26.9 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.700
69015 26.9 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.200
5161 28 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.793
5165 28 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.980
69018 28 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.840
5581 30 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.050
5584 30 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.380
69019 30 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.940
67724 30 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.560
67725 30 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.080
69020 30 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.680
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 27
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
123508 30 7.5 181 EN 10294-1 E470 bl not oil plain SRL 5.317
69022 30 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.340
5652 31.8 2 211 EN 10219 S235JRH bl not oil plain 6 1.470
101594 31.8 2 211 EN 10219 S235JRH bl not oil plain 9 1.470
5656 31.8 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.870
69023 31.8 2.9 125 EN 10210 S355J2H bl not oil plain SRL 2.070
67729 31.8 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.740
5665 31.8 4.5 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.030
67731 31.8 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.300
67734 31.8 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.320
67735 31.8 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.700
5679 32 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.130
5685 32 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.480
5688 32 3 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.150
5824 33.4 3.4 1 STD 150 A333 A333/6LT45 bl oiled plain SRL 2.500
5825 33.4 3.4 1 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 2.500
75145 33.4 3.4 1 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 2.500
5826 33.4 3.4 1 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 2.630
5832 33.4 4.5 1 XS 150 A333 A333/6LT45 bl oiled plain SRL 3.240
5833 33.4 4.5 1 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 3.240
75149 33.4 4.5 1 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 3.240
5834 33.4 4.5 1 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 3.410
5843 33.4 6.4 1 S160 150 A333 A333/6LT45 bl oiled plain SRL 4.240
5844 33.4 6.4 1 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.240
34551 33.4 9.1 1 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 5.450
5848 33.4 9.1 1 XXS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.450
249 33.7 2.25 1 231 EN 10219 bl not oil plain 6 1.734
250 33.7 2.25 1 231 EN 10219 galvanized plain 6 1.830
5883 33.7 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 1.990
5884 33.7 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.990
5886 33.7 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 1.990
253 33.7 2.65 1 231 EN 10255 L2 bl not oil plain 6 2.010
256 33.7 2.65 1 231 EN 10255 L2 galvanized T and C 6 2.150
31048 33.7 2.65 1 231 EN 10255 L2 galvanized plain 6 2.130
54330 33.7 2.65 1 233 EN 10219 S235JRH bl not oil plain 6 2.010
81852 33.7 2.65 1 233 EN 10255 L2 CF galvanized plain 6 2.100
5891 33.7 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.410
5890 33.7 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 2.410
5892 33.7 3.2 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.410
247 33.7 3.25 1 220 poly plain 6 2.440
257 33.7 3.25 1 230 EN 10255 M bl not oil plain 6 2.440
259 33.7 3.25 1 230 EN 10255 M galvanized plain 6 2.550
120986 33.7 3.25 230 EN 10255 M galvanized T and C 6 2.610
74640 33.7 3.25 1 232 EN 10255 M CF galvanized plain 6 2.550
81965 33.7 3.25 1 232 EN 10219 S235JRH bl not oil plain 6 2.440
28 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
258 33.7 3.25 1 239 EN 10255 M Install bl not oil plain 6 2.440
260 33.7 3.25 1 239 EN 10255 M Install el zinc pl plain 6 2.440
261 33.7 3.25 1 239 galvanized plain 6 2.550
262 33.7 3.25 1 239 shbl paint plain 6 2.440
268 33.7 3.25 1 239 EN 10255 M Install bl not oil T and C 6 2.460
270 33.7 3.25 1 239 galvanized T and C 6 2.610
271 33.7 3.25 1 239 shbl paint T and C 6 2.460
5893 33.7 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.670
5894 33.7 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 2.930
273 33.7 4.05 1 239 EN 10255 H Install bl not oil plain 6 2.970
69024 33.7 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.540
75093 33.7 5 212 EN 10219 S235JRH bl not oil plain 6 3.540
122755 33.7 5 212 EN 10219 S275J0H galvanized plain 6 3.540
6227 35 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.240
6228 35 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 1.240
6230 35 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.630
6239 35 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.080
69026 35 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.060
69028 35 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.700
123724 35 5 181 EN 10294-1 E470 bl not oil plain SRL 5.092
69030 35 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.460
69031 35 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.890
123509 35 7.5 181 EN 10294-1 E470 bl not oil plain SRL 6.411
69032 35 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.330
69033 35 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.170
6424 38 2 211 EN 10219 S235JRH bl not oil plain 6 1.780
6426 38 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.780
74771 38 2.25 211 EN 10219 S235JRH bl not oil plain 9 1.980
122757 38 2.25 213 S500MC powdercoat plain 10 1.980
6433 38 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.270
6434 38 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.270
6435 38 2.6 213 EN 10219 S235JRH bl not oil plain 6 2.270
69035 38 3.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.750
67742 38 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.350
6444 38 4 212 EN 10219 S235JRH bl not oil plain 6 3.350
67743 38 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.070
67745 38 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.930
69037 38 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.410
67746 38 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.920
67748 38 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.910
6827 40 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.870
123726 40 5 181 EN 10294-1 E470 bl not oil plain SRL 5.853
123727 40 7.5 181 EN 10294-1 E470 bl not oil plain SRL 7.505
123578 40 10 181 EN 10294-1 E470 bl not oil plain SRL 8.671
6987 42.2 3.6 1.1/4 STD 150 A333 A333/6LT45 bl oiled plain SRL 3.390
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 29
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
6988 42.2 3.6 1.1/4 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 3.390
75150 42.2 3.6 1.1/4 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 3.390
6989 42.2 3.6 1.1/4 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 3.570
6991 42.2 4.8 1.1/4 XS 150 A333 A333/6LT45 bl oiled plain SRL 4.470
6992 42.2 4.8 1.1/4 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.470
75146 42.2 4.8 1.1/4 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 4.470
6993 42.2 4.8 1.1/4 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 4.710
119737 42.2 6.4 1.1/4 S160 150 A333 A333/6LT45 bl oiled plain SRL 5.610
73364 42.2 6.4 1.1/4 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.610
119738 42.2 9.7 1.1/4 XXS 150 A333 A333/6LT45 bl oiled plain SRL 7.770
117206 42.2 9.7 1.1/4 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 7.770
1428 42.4 2.25 1.1/4 231 EN 10219 bl not oil plain 6 2.217
1429 42.4 2.25 1.1/4 231 EN 10219 galvanized plain 6 2.350
7022 42.4 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.550
7023 42.4 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.550
7024 42.4 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.550
23370 42.4 2.65 1.1/4 231 EN 10255 L2 bl not oil plain 6 2.580
31767 42.4 2.65 1.1/4 231 EN 10255 L2 galvanized plain 6 2.690
54331 42.4 2.65 1.1/4 233 EN 10219 S235JRH bl not oil plain 6 2.580
81853 42.4 2.65 1.1/4 233 EN 10255 L2 CF galvanized plain 6 2.690
7026 42.4 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.090
7027 42.4 3.2 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 3.090
1426 42.4 3.25 1.1/4 220 poly plain 6 3.140
1427 42.4 3.25 1.1/4 220 poly T and C 6 3.170
1435 42.4 3.25 1.1/4 230 EN 10255 M bl not oil plain 6 3.140
1437 42.4 3.25 1.1/4 230 EN 10255 M galvanized plain 6 3.280
36342 42.4 3.25 1.1/4 232 EN 10219 S235JRH bl not oil plain 6 3.140
1436 42.4 3.25 1.1/4 239 EN 10255 M Install bl not oil plain 6 3.140
1438 42.4 3.25 1.1/4 239 EN 10255 M Install el zinc pl plain 6 3.140
1439 42.4 3.25 1.1/4 239 galvanized plain 6 3.280
1440 42.4 3.25 1.1/4 239 shbl paint plain 6 3.140
1445 42.4 3.25 1.1/4 239 EN 10255 M Install bl not oil T and C 6 3.170
1447 42.4 3.25 1.1/4 239 galvanized T and C 6 3.360
1448 42.4 3.25 1.1/4 239 shbl paint T and C 6 3.170
7033 42.4 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.790
142977 42.4 4 217 EN 10219 S355J2H bl not oil plain 6 3.790
7035 42.4 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 3.790
1450 42.4 4.05 1.1/4 239 EN 10255 H Install bl not oil plain 6 3.840
67750 42.4 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.610
7037 42.4 5 212 EN 10219 S235JRH bl not oil plain 6 4.610
67751 42.4 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.080
67752 42.4 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.610
125548 42.4 7.1 120 EN 10216-1 P235TR2 bl not oil plain SRL 6.180
67754 42.4 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.790
67755 42.4 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.990
7063 44.5 2 211 EN 10219 S235JRH bl not oil plain 6,40 2.100
7066 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 7 2.340
39418 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 9 2.340
30 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
93922 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 10 2.340
7067 44.5 2.3 213 EN 10219 S235JRH bl not oil plain 6 2.390
7072 44.5 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.690
7074 44.5 2.6 213 EN 10219 S235JRH bl not oil plain 6 2.690
67758 44.5 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.870
67760 44.5 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.940
67762 44.5 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 6.550
67763 44.5 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.200
67765 44.5 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.510
69042 44.5 11 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.090
67766 44.5 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.860
123510 45 7.5 181 EN 10294-1 E470 bl not oil plain SRL 8.688
1140 48.3 2.5 1.1/2 231 EN 10219 bl not oil plain 6 2.811
1141 48.3 2.5 1.1/2 231 EN 10219 galvanized plain 6 2.980
7226 48.3 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.930
7228 48.3 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.930
7230 48.3 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.930
1145 48.3 2.9 1.1/2 231 EN 10255 L2 galvanized plain 6 3.400
24950 48.3 2.9 1.1/2 231 EN 10255 L2 bl not oil plain 6 3.250
54332 48.3 2.9 1.1/2 233 EN 10219 S235JRH bl not oil plain 6 3.250
57004 48.3 2.9 1.1/2 233 EN 10255 L2 CF galvanized plain 6 3.400
7233 48.3 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.560
32278 48.3 3.2 430 EN39/2001 S235GT galvanized 6 3.830
1138 48.3 3.25 1.1/2 220 poly plain 6 3.610
1139 48.3 3.25 1.1/2 220 poly T and C 6 3.650
1147 48.3 3.25 1.1/2 230 EN 10255 M bl not oil plain 6 3.610
1149 48.3 3.25 1.1/2 230 EN 10255 M galvanized plain 6 3.770
81851 48.3 3.25 1.1/2 232 EN 10255 M CF galvanized plain 6 3.770
81966 48.3 3.25 1.1/2 232 EN 10219 S235JRH bl not oil plain 6 3.610
1148 48.3 3.25 1.1/2 239 EN 10255 M Install bl not oil plain 6 3.610
1150 48.3 3.25 1.1/2 239 EN 10255 M Install el zinc pl plain 6 3.610
1151 48.3 3.25 1.1/2 239 galvanized plain 6 3.770
1152 48.3 3.25 1.1/2 239 shbl paint plain 6 3.610
1156 48.3 3.25 1.1/2 239 EN 10255 M Install bl not oil T and C 6 3.650
1158 48.3 3.25 1.1/2 239 galvanized T and C 6 3.870
1159 48.3 3.25 1.1/2 239 shbl paint T and C 6 3.650
7242 48.3 3.7 1.1/2 STD 150 A333 A333/6LT45 bl oiled plain SRL 4.050
7243 48.3 3.7 1.1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.050
75147 48.3 3.7 1.1/2 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 4.050
7244 48.3 3.7 1.1/2 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 4.240
7246 48.3 4 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 4.370
7245 48.3 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 4.370
141762 48.3 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 4.370
143219 48.3 4 212 EN 10219 S235JRH bl not oil plain 6 4.370
142978 48.3 4 217 EN 10219 S355J2H bl not oil plain 6 4.370
7248 48.3 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 4.370
142655 48.3 4.05 1.1/2 230 EN 10255 H bl not oil plain 6 4.430
1161 48.3 4.05 1.1/2 239 EN 10255 H Install bl not oil plain 6 4.430
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 31
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69043 48.3 4.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.860
69044 48.3 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.340
7255 48.3 5 212 EN 10219 S235JRH bl not oil plain 6 5.340
7256 48.3 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 5.340
7260 48.3 5.1 1.1/2 XS 150 A333 A333/6LT45 bl oiled plain SRL 5.410
7261 48.3 5.1 1.1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.410
75148 48.3 5.1 1.1/2 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 5.410
7262 48.3 5.1 1.1/2 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 5.660
67771 48.3 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.530
7266 48.3 6.3 212 EN 10219 S235JRH bl not oil plain 6 6.530
69045 48.3 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.210
7274 48.3 7.1 1.1/2 S160 150 A333 A333/6LT45 bl oiled plain SRL 7.250
7275 48.3 7.1 1.1/2 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 7.250
67772 48.3 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.950
67773 48.3 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.450
119739 48.3 10.2 1.1/2 XXS 150 A333 A333/6LT45 bl oiled plain SRL 9.560
7222 48.3 10.2 1.1/2 XXS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 9.560
67775 48.3 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.000
7382 50 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.790
123511 50 7.5 181 EN 10294-1 E470 bl not oil plain SRL 9.872
123579 50 10 181 EN 10294-1 E470 bl not oil plain SRL 11.829
7542 51 2 211 EN 10219 S235JRH bl not oil plain 6 2.420
7545 51 2.25 211 EN 10219 S235JRH bl not oil plain 7 2.710
7546 51 2.25 211 EN 10219 S235JRH bl not oil plain 9 2.710
7548 51 2.25 211 EN 10219 S235JRH el zinc pl plain 7 2.710
74666 51 2.25 211 EN 10219 S235JRH bl not oil plain 10 2.710
108266 51 2.25 211 EN 10219 S235JRH galvanized plain 7 2.710
7550 51 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 3.100
7551 51 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 3.100
7553 51 2.6 213 EN 10219 S235JRH bl not oil plain 6 3.100
69047 51 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.440
124427 51 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 3.440
106208 51 2.9 212 EN 10219 S235JRH bl not oil plain 6 3.440
67776 51 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.640
7559 51 4 212 EN 10219 S235JRH bl not oil plain 6 4.640
67777 51 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.670
7562 51 5 212 EN 10219 S235JRH bl not oil plain 6 5.670
67778 51 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.940
67779 51 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.690
67780 51 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.480
67781 51 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.160
67782 51 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.100
67783 51 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.900
67784 51 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 12.900
7583 54 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.570
69048 54 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.650
32 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
-
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69049 54 3.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.470
69050 54 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.930
67785 54 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.040
69051 54 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.410
69052 54 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.210
69053 54 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.900
123512 55 7.5 181 EN 10294-1 E470 bl not oil plain SRL 11.615
123513 55 10 181 EN 10294-1 E470 bl not oil plain SRL 13.905
123580 55 12.5 181 EN 10294-1 E470 bl not oil plain SRL 15.901
7634 57 2 211 EN 10219 S235JRH bl not oil plain 6 2.710
7637 57 2.25 211 EN 10219 S235JRH bl not oil plain 6,40 3.040
55175 57 2.25 211 EN 10219 S235JRH bl not oil plain 9 3.040
7640 57 2.6 213 EN 10219 S235JRH bl not oil plain 6 3.490
7641 57 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 3.870
7646 57 2.9 213 EN 10219 S235JRH bl not oil plain 6 3.870
37823 57 2.9 213 EN 10219 S235JRH bl not oil plain 12 3.870
7651 57 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.250
67788 57 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.230
141763 57 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 6.410
69056 57 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.880
67791 57 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.740
67792 57 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.670
69057 57 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.500
67793 57 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.600
67794 57 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 13.700
67796 57 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.200
8120 60.3 2 211 EN 10219 S235JRH bl not oil plain 6 2.880
8122 60.3 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.880
8123 60.3 2.25 211 EN 10219 S235JRH bl not oil plain 6,40 3.220
3693 60.3 2.5 2 231 EN 10219 bl not oil plain 6 3.539
8124 60.3 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 4.110
8126 60.3 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.110
8127 60.3 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 4.110
8130 60.3 2.9 213 EN 10219 S235JRH bl not oil plain 6 4.110
8131 60.3 2.9 213 EN 10219 S235JRH bl not oil plain 12 4.110
114483 60.3 2.9 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 4.110
8134 60.3 2.9 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 4.110
3697 60.3 2.9 2 231 EN 10255 L2 galvanized plain 6 4.310
31049 60.3 2.9 2 231 EN 10255 L2 bl not oil plain 6 4.110
57005 60.3 2.9 2 233 EN 10255 L2 CF galvanized plain 6 4.310
81964 60.3 2.9 2 233 EN 10219 S235JRH bl not oil plain 6 4.110
8135 60.3 3.2 212 EN 10219 S235JRH bl not oil plain 6 4.510
8