Pocket Guide to Cold Applied Liquid Waterproofing
Flat Roofs | Green Roofs | Balconies | Walkways | Podia | Terraces
abc
Contents
Tremco Cold AppliedWaterproofing Systems Page No.
Introduction 4
Rapid Cure Roofing System
Tremco CR360 / CP930 6
Low Odour Roofing System
Tremco LWS 25 CR320 / CR325 8
Buried Membrane for Concrete Substrates
Tremco CP250 10
Balcony and Walkway Coating System
Tremco CP350 / CP951 12
Decorative Balcony & Walkway Coating System
Tremco CP310 14
Coverage & Packaging Guide 16
Primer Table 18
First for Performance
Cold Applied Liquid WaterproofingFlat Roofs | Green Roofs | Balconies | Walkways | Podia | Terraces
A Choice of Systems to Match Your Needs With nearly 85 years’ experience in waterproofing buildings and structures, we know that projects vary greatly in terms of site conditions, application restrictions and client expectations. Common sense tells us that the concept of ‘one system fits all’ simply doesn’t work. This is why we offer a range of liquid coating systems to meet your individual circumstances and requirements, be they on new build or refurbishment projects.
Adding Value To . . .
Building Owners – Peace of mind is ultimately what we seek to deliver. Our products will do what they claim to do, that is waterproof your structure and protect your asset. Recommended installers get the job done right first time. Our high performance systems help minimise future maintenance liabilities.
Specifiers/Designers – We will provide tailored solutions that match your needs, supported with technical assistance from the design stage through to pre-start meetings and on-going project support on site.
Contractors – Cost effective products designed with the demands of real-life site application in mind. We provide training for new operatives at our in-house facilities. On-site, technical support is in place to ensure an effective application. A smooth supply chain delivers products where and when you need them.
4 | | 5
Support for You
• Conditionsurveysand fault identification
• Detailingrecommendations
• Methodstatements
• SpecificationsincludingNBS
• RIBAapprovedCPD
• CADdrawings
• Experton-sitesupport
• Recommendedcontractors
• Warranties
Warm Roofs Inverted Roofs Cold Roofs
Paved Roofs Green Roofs Planters & Water Features
Balconies Walkways Buried Membranes
Tremco LWS 25(Tremco CR320/325)
Effective solutions for:
Repoma (Tremco CR360)
6 | | 7
Rapid Cure Roofing System
Tremco CR360/CP930 Repoma A unique roof waterproofing system based on PUMA technology, incorporating the flexibility and crack bridging of polyurethane and the key benefits of methacrylate resins.
Tremco CR360 Repoma Heavy Duty Waterproof CoatingTremco CP930 Coloured Sealer Coat (optional)
Suitable for:
• Exposedflatorslopingroofs
• Year round roofing projects
• New build or refurbishment of existing, structurally sound roofs
Suitable Substrates
• Roofing felt • Wood
• Mastic asphalt (roofing grade) • Metals
• PVC single ply membranes • Concrete
Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.
Key Features
• Very fast curing – 30 minutes at 15°C
• Possibility to apply at very low temperatures (0°C)
• No primer needed on most substrates
• Excellentthermalresistance-30°Cto+90°C
• Cold applied – no hazardous hot works
• Seamless & fully bonded
• High elasticity and crack bridging
• High vapour permeability
• TestedinaccordancewithETAG005 To request technical or specification assistance
) 01942 251400 * [email protected]
�
Asphalt Substrate
��
�
Main Application Areas
Warm Roofs Inverted Roofs Cold Roofs
Paved Roofs Green Roofs Planters & Water Features
System Build-Up Example
1. Tremco CR360 Waterproof Coating - Light Grey
2. Tremco CP581 Fleece Reinforcement Membrane
3. Tremco CR360 Waterproof Coating - Light Grey
4. Tremco CP930 Coloured Sealer Coat (optional)
Colours: RAL 7016 Dark Grey, RAL 7037 Medium Grey, RAL 6024 Green, RAL 5017 Blue and RAL 3020 Red
Ancillary Components
Tremco CP510 - Initiator for CR360
Tremco CP592 - Pigment for CP930
Tremco CP150 - Primer for concrete, cement & wood
Tremco CR520 - Thixotropic filler for CR360 for upstands
Application Detail
Refer to current product Technical Data Sheets.
8 | | 9
Low Odour Roofing System
Tremco LWS 25 CR320 / CR325 A roof waterproofing system comprising two, single part, moisture curing, polyurethane coatings, reinforced with an embedded fibreglass matting.
Tremco CR320 Base Coat
Tremco CR325 Top Coat
Suitable for:
• Exposedflatorslopingroofswithlimitedaccess
• New build or refurbishment of existing structurally sound roofs
An optional wearing course is available for areas subject
to regular foot traffic.
Suitable Substrates
• Roofing felt • Wood
• Mastic asphalt (roofing grade) • Metals
• PVC single ply membranes • Concrete
Durability Under normal service conditions the system will provide a durable waterproof covering with a service life up to 25 years.
Key Features
• Excellentdurability
• Weather resistant
• Cold applied – no hazardous hot works
• Seamless & fully bonded
• UV resistant
• Accommodates complex shapes and penetrations
• Single component
• BBA certification To request technical or specification assistance
) 01942 251400 * [email protected]
�
Asphalt Substrate
���
Main Application Areas
Warm Roofs Inverted Roofs Cold Roofs
Paved Roofs Green Roofs
System Build-Up Example
1. Tremco CR320 Base Coat - Red
2. Tremco CR510 Reinforcement Matting - 100 gsm
3. Tremco CR320 Base Coat - Red
4. Tremco CR325 Top Coat - Light Grey
Ancillary Components
Tremco CR100 Concrete & Asphalt Primer
Tremco CR110 Metal Primer
Tremco CR300 Fibre Reinforced Coating
Tremco CR525 Reinforcement Matting - 225 gsm
Application Detail
Refer to current product Technical Data Sheets.
10 | | 11
Buried Membrane for Concrete Substrates
Tremco CP250 An elastomeric waterproofing membrane for unexposed applications. Comprising a single part, rapid curing, modified polyurethane coating that can be applied to ‘green’ or damp concrete. Available in self-leveling and trowelable grades.
Suitable for:
• Unexposed waterproofing applications
• Vertical and horizontal substrates
• New build or refurbishment projects
Suitable Substrates
• Concrete
Durability Under normal service conditions the system will provide a durable waterproof covering with a service life in excess of 20 years.
Key Features
• Membrane applied in a single coat without primer in most cases
• Can be applied directly to damp or green concrete without priming
• Rapid curing – can be overlaid in as little as 4 hours
• Self-leveling & trowelable grades
• Cold applied – no hazardous hot works
• Seamless & fully bonded
• Highly elastomeric To request technical or specification assistance
) 01942 251400 * [email protected]
�
Concrete Substrate
��
Main Application Areas
Paved Roofs Inverted Roofs Green Roofs
Planters Buried Membranes
System Build-Up Example
1. Tremco CP250 Waterproof Membrane 2. Tremco CP620 Heavy Duty Protection Course 3. Tremco CP650 Multi-Composite Drainage & Protection Mat* * See data sheet for availablity of different grade options.
Ancillary Components
TremcoCP600DualflexReinforcement
Tremco CP610 Dualdrain Reinforcement
Tremco CP630 Protection Sheet
Tremco CP640 Root Barrier
Application Detail
Refer to current product Technical Data Sheets.
12 | | 13
Balcony and WalkwayCoating System
Tremco CP350 / CP951 A balcony and walkway waterproofing system comprising two modified polyurethane coatings
Tremco CP350 Base Coat - Single part elastomeric coating
Tremco CP951 Top Coat - Two part wearing coating
Suitable for:
• Exposedandunexposedsurfaces
• Areas subject to pedestrian and vehicular traffic
• New build or refurbishment projects
Suitable Substrates
• Concrete & cementious screeds
• Timber
Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.
Key Features
CP350
• Highly elastomeric coating – excellent crack bridging properties
• Self-levelling
• Fast curing – overcoat in as little as 6 hours
CP951
• Extremelytoughwithexcellentabrasionresistance
• Fast curing – usually able to receive light foot traffic within 24 hours depending on temperatures and site conditions
• Can be applied over existing polyurethane coatings To request technical or specification assistance
) 01942 251400 * [email protected]
�
Concrete Substrate
��
�
Main Application Areas
Balconies Walkways
System Build-Up Example
1. Tremco CP171 Concrete Primer
2. Tremco CP350 Base Coat - Grey
3. Tremco CP951 Top Coat Colours: RAL 3020 Red, RAL 5017 Blue, RAL 6024 Green, RAL 7016 Grey, RAL 7037 Light Grey, RAL 9005 Black
4. Tremco CP508 - a medium-fine natural quartz sand
Ancillary Components
Tremco CP191 Reactivator - for overcoating existing PU coatings
Tremco CP590 Colourpaste - for use with Tremco CP951
Application Detail
Refer to current product Technical Data Sheets.
14 |
Decorative Balcony and Walkway Coating System
Tremco CP310 A balcony and walkway waterproofing system comprising a single part, elastomeric, polyurethane coating applied in one layer. Single colour or decorative flake finishes available.
Suitable for:
• Exposedsurfaces
• Areas subject to pedestrian traffic
• New build or refurbishment projects
Suitable Substrates
• Concrete & cementious screeds
• Timber
Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.
Key Features
• Membrane applied in a single coat
• Touch dry after 2 hours, fully cured after 6 hours
• Maybescatteredwithflakestoprovideadecorativefinish
• Elastomericthroughcompletesystem
• Contains biocide, effective against micro-organisms
• Exceptionalabrasionresistance
| 15
To request technical or specification assistance
) 01942 251400 * [email protected]
�
Concrete Substrate
��
Main Application Areas
Balconies Walkways
System Build-Up Example
1. Tremco CS175 Dry Substrate Primer
TremcoES200WetSubstratePrimer
2. Tremco CP310 Flexible PU Wearing Membrane - Grey
3. Tremco CS681 Decorative Flake Blend Colours: Grey, Black/Grey, Brown/Beige, Beige, Blue and Red.
Application Detail
Refer to current product Technical Data Sheets.
16 |
Coverage & Packaging Guide
Product Description Unit Size Approximate Coverage/ Unit
Rap
id C
ure Ro
of S
ystem
TremcoCR360
Waterproofing Coating
25 kg 8.1 m²
TremcoCP930
Coloured Sealer Coat
25 kg 66.7 m²
Tremco CP581
Fleece Reinforcement
150 mm x 98.8 m roll1020 mm x 98.8 m roll
98.8 lm100.0 m²
TremcoCP510
Initiator for use with CR360
2 kg25 kg
32.4 m²405.0 m²
TremcoCP150
Primer Concrete, Cement & Wood
20 kg 50.0 m²
Tremco CP592
Micronised Pigment Powder
for use with CP930
25 kg1 kg per 10 kg of
CP930
TremcoCR520
Thixotropic Filler 10 kg 178.6 m²
Low
Od
our R
oo
f System
TremcoCR320
Base Coat 12.5 litres 12.5 m²
TremcoCR325
Top Coat 12.5 litres
25.0 m² 10 year system
16.0 m² 15 year system
12.5 m² 20/25 year system
TremcoCR510
ReinforcementMatting - 100
gsm1 m x 150 m roll 150.0 m²
Tremco CR525
ReinforcementMatting - 225
gsm1 m x 112 m roll 112.0 m ²
TremcoCR100
Primer Concrete &
Asphalt5 litres 20.0 m²
TremcoCR110
Primer Metal
5 litres 110.0 m²
TremcoCR300
Fibre Reinforced Coating
5 litres 8.0 m²
| 17
Product Description Unit Size Approximate Coverage/ Unit
Buried
Mem
brne
TremcoCP250
Waterproof Coating
Self-LevellingTrowelable
21.6 litres
12.0 litres
9.8 m² @ 2 mm6.5 m² @ 3 mm
3.6 m² @ 3 mm
TremcoCP620
Protection Course
1.0 m x 20 m roll 20 m²
TremcoCP650*
Drainage & Protection
Board1.1 m x 50 m roll 55 m²
Balco
ny & W
alkway C
oating
s
TremcoCP350
ElastomericBase Coat
18.9 litres 26 m²
TremcoCP951
Wearing Top Coat
Pt A - 14.2 litresPt B - 3.2 litres
54 m²
Tremco CP590
Colourpaste for CP951
400 g2 pots per 17.4 litres of CP951
TremcoCP171
PrimerConcrete
19.0 litres 135 m²
TremcoCP191
Reactivator to ExistingPU
Coatings18.9 litres 235 m²
Tremco CP508
Medium-FineNatural Quartz
Sand25.0 kg 25 m²
Tremco CP310
Balcony Coating 12.5 litres 8.3 m²
Tremco CS175
Dry Surface Primer
Pt A ) 7.5 kgPt B )
75 m²
Tremco ES200
Wet Surface Primer
Pt 1 ) 6.0 kgPt 2 )
12.5 to 15 m²
CS681Decorative Flake
Blend20.0 kg as required
* See data sheet for availablity of different grade options. Coverage rates indicated should not be exceeded as this may affect product performance.
Priming Guide
The table below indicates the appropriate primer for each of our waterproofing systems.
With the variability in substrates it is best practice to carry out an on-site adhesion test. Technical Service support is available to assist with this.
TremcoCR320
TremcoCR360
TremcoCP250
TremcoCP350
Bitumen Roof Felt ü ü û û
Asphalt ü ü û ûConcrete Screeds
CR100 CP150 ü CP171
Single Ply Membrane ¬ ¬ û û
Brickwork CR100 CP150 ü CP171
Glass ü ü û ûCopper CR110 ü ü CP171
Lead CR110 ü ü CP171
AluminiumGalvanised SteelZinc
CR110 ü ü CP171
Wood Panels CR100 CP150 ü CP171
Polyurethane Insulation Boards ¬ ¬ û û
ü No Primer Requiredû Not Suitable¬ Contact Tremco illbruck Technical Department
19 | | 19
Tremco illbruck LimitedCoupland Road,Hindley GreenWigan WN2 4HT UK
Tel:+44(0)1942251400Fax:+44(0)[email protected]
January 2012