K-140 K-141 K-142
148126
23
11°�
K-203-1
K-35-2
Grooved rolls for close-to-flare cuts.
Rotate to a direction of an arrow and cut tube off.
There is a replacement blade in the rear of the handle.
With chamfering blade
■Replacement Parts
■Replacement Parts
■Replacement Parts
Brade
K-35 �BURR SCRAPER●It can cut copper, brass, aluminum and thin stainless steel tube and conduit tubes.�
●The main body of the tools is made from high strength aluminum alloy. The cutter wheels and reamer are made from hardened alloy steel.�
●The reamer is conveniently stored in the rear of the handle.�
�
■Length of blade：10mm■O.A.L.：148mm■Weight：35g
K-203 �PIPE CUTTER
■For stainless steel,copper pipe■Cuts Capability：3～32mm（1/8"～1 1/4"φ）■O.A.L.：130mm■Weight：205g■Accessory：K-203-1
This tube cutter is designed to cut without leaving a
burr or distorting the tube.
K-88 �HAND NIBBLING TOOL
■Cuts Capability：Thin iron sheet up to 0.6 mm thick. Aluminum plate up to 1.5 mm thick.
■O.A.L.：173mm■Weight：190g※It requires a 10mm hole to allow the cutting tool to enter the work.
This is a hand held nibbling cutter to cut any desired shape hole in sheet materials.
Medium♯60
Fine♯120
Extra fine♯320
Part No. Dimensionsmm WeightGrit Grade Example used Materials
K-140 Steel
K-141 Aluminum 50×25.5×20
K-142 Soldering iron tips
K-35-1/2/3 BLADE
■2/pack■K-35-1 For steel(black,single)�K-35-2 For resin(silver,double)�K-35-3 Almighty blade(black,double)��
K-203-1 �BLADE■For stainless steel and
copper pipe
K-203-11 �BLADE■Exclusive copper pipe
K-881 �BLADE
K-140/141/142 �POLISHING PAD
●They are made from alumina media which is a very good abrasive.��
■Operating temperature limit：Approx. 60℃ to 70℃�
These are rubberized abrasive blocks
designed to remove rust, oxides and
other unwanted coatings.
The K-140 has medium grade, #60 media.It is best for removing rust and oxides from the surface of metals.
The K-141 is very good for removing burrs on aluminum sheets or other soft materials.
Once the nibbler is inserted the user is free to cut any kind of hole they want.
The K-142 is very good for cleaning soldering tips especially for cleaning the oxides from using lead free solder.
※It should only be used when the tip has returned to room temperature.K-140 K-141 K-142
4Foamed NBR & Sintered alumina
�
51E-mail for a technical inquiry. [email protected]
Polishing Pad / Burr Scraper / Pipe Cutter / Hand Nibbling Tool KMETAL WORKING TOOLSSCREW
DRIVERS & W
RENCHESM
ETAL WORKING
TOOLSDESO
LDERING
TO
OLS
MEASURING
INSTRUMENTS
MICROSCOPES &
MAGNIFIERS
MAIN
TENAN
CE TO
OLS
CLEAN ENVIRONM
ENTCU
TTERS
CRIM
PERS
TWEEZ
ERS
CASES & BAG
STO
OL K
ITSSOLDERING TOOLS
STATIC CONTROLCH
EMICA
LSW
IRE STRIPPERS
050-051 08.2.22 11:24 PM ページ 2
