Poway High School Robotics
Team Spyder 1622FRC Team (FIRST Robotics Competition)
Spring 2014
1
For more information, please contact:
Rodger Dohm, Poway High School – Instructor,Team 1622 FIRST Robotics Lead Advisor
[email protected] Christoph Hiemcke, Mentor, GA-ASI employee,
author of this [email protected]
Matthew Culley, Mentor, GA-ASI employeeClark Schiferl, Mentor, GA-ASI employee
Poway High School Robotics, Team Spyder 1622
Contents
SummaryPoway High School: Engineering Pathway
FIRST: JrFLL, FLL, FRC, and FRCBackground on FRC
2014 FRC Challenge “Aerial Assist”Team Spyder 2014: Mechanical Team
2014 Regional CompetitionTeam Spyder: Website
2
Poway High School Robotics, Team Spyder 1622
Summary
One purpose of this presentation is to express our gratitude to our sponsors, including GA through its
GASSS program.
This presentation provides an overview of the Poway High School Robotics “Team Spyder 1622”
and the worldwide FIRST Robotics Competition (FRC) in which it competes. Special emphasis is
on the activities of the 2014 season.
3
Poway High School Engineering Pathway
The Engineering Pathway is a set of STEM courses (Science, Technology, Engineering, and Technology):
Introduction to Engineering Design Engineering Geometry Principles of Engineering Computer Integrated Manufacturing (CIM) Engineering Design Development Architectural Design Science Olympiad Robotics
http://www.powayusd.com/pusdphs/engine
4
Poway High School Engineering Pathway
The Robotics course is open to all Poway High School students, from Grade 9-12.
The Engineering Pathway is part of Project Lead The Way (PLTW), which involves 68 university
partners. Many universities have special scholarships for FIRST participants.
5
Background on FIRST: JrFLL, FLL, FTC, FRC
FIRST was founded by Dean Kamen (of Segway fame) in 1989. FIRST stands for: For Inspiration and Recognition of
Science and Technology.
http://www3.usfirst.org
6
FIRST is now divided into four programs, based on the participant’s age.
FLL (FIRST Lego League) uses the LegoMindstorms robotics components, whereas FTC (FIRST Technology Challenge)
uses the TETRIX system.
Background on FRC
The FRC is usually a sports-like game with two opposing teams on a field. Each side has three robots. During the qualifiers,
robots are assigned to each side. During later rounds, winning teams get to choose their partners.
http://www.usfirst.org/roboticsprograms/frc/game-and-season-info
7
Each game begins with an autonomous period of about 30 seconds, followed by about two minutes of remotely
operated action.
In R/C mode, the pilots use joysticks to drive the robots via a wireless link. The robots are about five feet high with a footprint of about 3x3 feet. They are limited in
weight to 150 pounds.
2014 FRC Challenge “Aerial Assist”
The 2014 “Aerial Assist” game is almost a mix of basketball and volleyball. Spanning the midline of the court is a truss (see photo on next slide). On either end of the court there are windows behind which the operators stand. Above the windows are oval holes which are goals for scoring. On the ground at each corner is a frame: when the ball is pushed
through it, points are scored. Passing the ball between robots is also worth points.
http://www.usfirst.org/roboticsprograms/frc
8
Poway High, 2014 Team Spyder: Kickoff
2014 Challenge “Aerial Assist”
9
Poway High, 2014 Team Spyder: Kickoff
Students watching the kick-off on Saturday, 4 Jan 2014
10
Poway High, 2014 Team Spyder: Mechanical Team
Students brainstorm, make sketches, and build wooden protoypes: this one was a kicking-pendulum design
11
Poway High, 2014 Team Spyder: Mechanical Team
Students re-design the robot using Creo Parametric 2.0, made available to all FTC teams for free
12
Poway High, 2014 Team Spyder: Mechanical Team
Students and mentors troubleshooting during the assembly: we settled on a launching frame with a linear spring (we added
surgical tubing later, to increase the launch force)
13
Poway High, 2014 Team Spyder: Mechanical Team
Exploration of simulation capabilities within PTC/Creo: using Creo/Mechanism to model spring-loaded launchers
14
Poway High, 2014 Team Spyder: Mechanical Team
Exploration of simulation capabilities within PTC/Creo: using Creo/Simulate to predict stresses in the launch frame
15
Poway High, 2014 Team Spyder: Mechanical Team
Regional Competition in San Diego (Sports Arena): our pit area
16
2014 Team Spyder: Regional in San Diego
Regional Competition in San Diego (Sports Arena): score!
17
2014 Team Spyder: Regional in San Diego
Regional Competition in San Diego (Sports Arena): ready!
18
2014 Team Spyder: Regional in San Diego
Regional Competition in San Diego (Sports Arena): block!
19
Team Spyder: Website
20
http://www.teamspyder.orgIt would be nice to see GA-ASI more prominently featured!