WORKPLACE TOOLS
Power & Cable Management
For more information, visit hon.com/workplacetools
© 2017 The HON Company. Form No. H4987 (3/17)
To view the registered and unregistered trademarks owned and used by The HON Company, visit hon.com/protected-marks. Models, upholstery and finishes are subject to change without notice.
The HON Company200 Oak StreetMuscatine, IA 52761800.833.3964 | hon.com
WIRED FOR WORKBring power and data directly to the worksurface and cleanly route cables and cords out of your way with HON power and cable management solutions. From electrical and USB outlets to advanced data ports, you don’t have to reach far to access the connectivity you need. Each attachment is designed to fit a variety of HON worksurfaces and workstations.
POWER HUB, 3" GROMMET MOUNT
HFLDGRMT, HFLDGRMT3, HGRMTAC, HGRMTUSB2 & HGRMDATA• Fits in 3" round grommet holes• HGRMTAC, HGRMTUSB2 &
HGRMDATA include 6′ cord with three-prong plug
HPWRMOD3WC, HPWRMOD3UWM, HPWRMOD2WC & HPWRMOD2UWM• 6’ power cord with three-prong plug• Under-worksurface mounting bracket
models work with any top that has a 5" x 5" square clearance
• Worksurface clamp models work on any top with a 4" overhang
• UL Listed
HPWRMOD2• Includes 10' cord with three-
prong plug• Fits in cable management troughs• 4 outlets on side create easy access
POWER MODULES
HCOMDOME2• Standard with two receptacles
and openings for two data ports• 6′ power cord with three-
prong plug• Fits on any worksurface with a
4" overhang• UL Listed
POWER/DATA CENTER
HTPWRGROM1 • Fits into 4" x 8" cutout• Pop-up Port provides three
power ports and one blank data receptacle
• Sits flush with worksurface when closed
• Includes 6′ cord with three- prong plug
HTPWRGROM2, HTPWRGROM3, HTPWRGROM4 & HTPWRGROM5• Fits into 5" x 11" cutout• Flip-top Port provides power and
data receptacles• Includes 6′ cord with three-prong
circuit breaker plug
POP-UP PORTS
HTPLATEVHAU & HTPLATEDHAU • Can be used in a single
Flip-Top Port• HTPLATEVHAU provides one
VGA port, two HDMI ports and one audio port
• HTPLATEDHAU provides one data port, one VGA port, one HDMI port and one audio port
HTPLATEVGA, HTPLATEHD & HTPLATEUSB4• 1 Double Space or 2 Single Space plates
can be used in a single Flip-Top Port• HTPLATEVGA provides one VGA port• HTPLATEHD provides one HDMI port• HTPLATEUSB4 provides one USB port
EXTRON PLATES CABLE MANAGEMENT
HCTROUGH17, HCTROUGH1710, HCTROUGH36 & HCTROUGH3610 • Attach underneath the
worksurface with screws• Wire access cut outs give users
access to inside the trough without having to detach it from the worksurface
HWMCLIPLG & HWMCLIPSM• Cleanly route cables and cords in
freestanding workstations• HWMCLIPSM ships as a 4-pack• HWMCLIPLG ships as an 8-pack
O-LEG CORD CLIPS
HHCMT24 & HHCMT36• Neatly route cords in 24"L or
36"L cable management tray for an organized work area