Download - Power Presentation West Palm
International Energy Resources
INTERNATIONAL ENERGY RESOURCES
PRESENTS
THE IER ENERGY SAVER (ES)!
INTERNATIONAL ENERGY RESOURCES
PRESENTS
THE IER ENERGY SAVER (ES)!
Protecting, Preserving & Improving the Environment
The Need for the IER (ES)The Need for the IER (ES)
•In the 21In the 21stst century “ century “Going GreenGoing Green” ” has become a corporate has become a corporate
responsibilityresponsibility
•With the rising cost of doing With the rising cost of doing business, Energy Efficiency is a business, Energy Efficiency is a
mustmust
•Help meet the social Help meet the social requirements of “requirements of “Being GreenBeing Green” ” and reap the financial savingsand reap the financial savings
The ProblemThe Problem
• Electric Motors use more than half of all electricityElectric Motors use more than half of all electricity• Electricity Costs:Electricity Costs:
– 1960’s1960’s .019/kwh .019/kwh – 1970’s1970’s energy crisis .044/kwh energy crisis .044/kwh – 20082008 .10+ /kwh .10+ /kwh
• Most A/C Induction motors operate at 80% Most A/C Induction motors operate at 80% efficiencyefficiency
• NASA research proved that substantial savings NASA research proved that substantial savings could be made on the running costs of A/C could be made on the running costs of A/C Induction motorsInduction motors
The Power Supply The Power Supply DilemmaDilemma
• The adequacy of North America’s Electricity system The adequacy of North America’s Electricity system will decline unless changes are made soon…will decline unless changes are made soon…
……demand for electricity is expected to increase over demand for electricity is expected to increase over the next ten years by 20% in the U.S., but the next ten years by 20% in the U.S., but confirmed power capacity will increase by only 10%confirmed power capacity will increase by only 10%
-NERC (North American Electric Reliability Council)-NERC (North American Electric Reliability Council)
““Over $16 billion dollars of electricity is Over $16 billion dollars of electricity is unusableunusable energy, but energy, but billablebillable in the US.” in the US.”
- U.S. Dept. of Energy- U.S. Dept. of Energy
20% increase in demand with 10% increase in supply
How the Utility Company & How the Utility Company & the Environment Benefitthe Environment Benefit• Enhancement of the capacity of the Enhancement of the capacity of the
existing electrical systemsexisting electrical systems• Power supplied to more customers Power supplied to more customers
without the generation or acquisition without the generation or acquisition of of additional power plantsadditional power plants..
• Less fossil fuel being used to Less fossil fuel being used to generate powergenerate power
• Less dependency on foreign oilLess dependency on foreign oil
The Unique Energy Savings with The Unique Energy Savings with the IER (ES)the IER (ES)
• The Patented diagnostic device & methodology The Patented diagnostic device & methodology determines to an exact science how much determines to an exact science how much capacitance is required to bring each inductive load capacitance is required to bring each inductive load to unityto unity
• Optimizing is precisely accomplished on each Optimizing is precisely accomplished on each inductive load in minutesinductive load in minutes
• The pre-engineered customized systems are The pre-engineered customized systems are assembled from modular components based on assembled from modular components based on sizing resultssizing results
• Installation is fast and simpleInstallation is fast and simple• Power savings are immediate and can be up to 25%Power savings are immediate and can be up to 25%• Realize a rapid return on investment (often 24 Realize a rapid return on investment (often 24
months or less)months or less)
IER (ES)IER (ES)
• Innovative, unique & Patented *Innovative, unique & Patented *• U.S. ManufacturedU.S. Manufactured• NASA Tested and usedNASA Tested and used• U.S. Government certifiedU.S. Government certified• UL Listed CSA ApprovedUL Listed CSA Approved• Cleaner & Greener / RoHS CertifiedCleaner & Greener / RoHS Certified• Reduces the amount of non-productive current in Reduces the amount of non-productive current in
your existing electrical system, resulting in a your existing electrical system, resulting in a significant reduction in power consumption costssignificant reduction in power consumption costs
• Thousands of installations worldwideThousands of installations worldwide• 5 year warranty / 12 year on Residential5 year warranty / 12 year on Residential *Methodology & Apparatus *Methodology & Apparatus
How does the IER Energy How does the IER Energy Saver (ES) work?Saver (ES) work?
• The IER (ES) stores the reactive power to create the The IER (ES) stores the reactive power to create the electromagnetic field (EMF) around the inductive windings of a electromagnetic field (EMF) around the inductive windings of a motormotor
• As motors operate, reactive power is “pushed” and “pulled” to and As motors operate, reactive power is “pushed” and “pulled” to and from the (ES) by the motor at 60 cycles per secondfrom the (ES) by the motor at 60 cycles per second
• The IER (ES) stores & releases to motors what they need to The IER (ES) stores & releases to motors what they need to function more efficientlyfunction more efficiently
• Electricity reclaimed and recycled by the (ES) would normally be Electricity reclaimed and recycled by the (ES) would normally be pushed back through the power distribution linespushed back through the power distribution lines
• The IER (ES) reclaims, stores, recycles and supplies Reactive The IER (ES) reclaims, stores, recycles and supplies Reactive power to inductive loadspower to inductive loads
Other BenefitsOther Benefits
• The IER (ES) improves the efficiency of the electrical The IER (ES) improves the efficiency of the electrical system & the kW capacity is increasedsystem & the kW capacity is increased
• Maintains quality voltage levels to your system with Maintains quality voltage levels to your system with less voltage drops especially long runs of cableless voltage drops especially long runs of cable
• Reduces the harmful effects from the EMF’sReduces the harmful effects from the EMF’s• Less power system losses in your distribution systemLess power system losses in your distribution system• Reduces the heat on wires and motorsReduces the heat on wires and motors• Decreases premature failure of motors and other Decreases premature failure of motors and other
inductive equipmentinductive equipment• Motors run cooler and are more efficientMotors run cooler and are more efficient• Increases the life of the motorsIncreases the life of the motors• Reduces maintenance costsReduces maintenance costs
Causes of Low Power FactorCauses of Low Power Factor
• Inductive loads are usually the major portion Inductive loads are usually the major portion of the power consumed in commercial of the power consumed in commercial buildings & industrial complexes – 80% or buildings & industrial complexes – 80% or moremore
• Types of Inductive loads (reactive Power)Types of Inductive loads (reactive Power)– TransformersTransformers– MotorsMotors– CompressorsCompressors– Fluorescent lighting with T-12 ballastsFluorescent lighting with T-12 ballasts– Older style high intensity discharge lighting (HID)Older style high intensity discharge lighting (HID)– Lightly loaded motors are wasteful and result in Lightly loaded motors are wasteful and result in
lower power factorlower power factor
Power Factor CorrectionPower Factor Correction
• A 20A 20thth Century Technology Century Technology• Installed on the line side near the main serviceInstalled on the line side near the main service• Main purpose is for the utility company to “clean up” Main purpose is for the utility company to “clean up”
their “dirty Power” their “dirty Power” and saves the electric company and saves the electric company moneymoney
Power factor OptimizationPower factor Optimization• A 21A 21stst Century Technology Century Technology• Installed on the demand side, close to the equipmentInstalled on the demand side, close to the equipment• Reduces amperage kWH (slows the meter)Reduces amperage kWH (slows the meter)• Saves the customer moneySaves the customer money• Reduce or eliminate Power Factor Correction Reduce or eliminate Power Factor Correction
penaltiespenalties
Why you should optimize Why you should optimize Power Factor?Power Factor?
• Reducing Amperage & kW usage, Reducing Amperage & kW usage, directly reflects dollar savingsdirectly reflects dollar savings
• Reduce the monthly “demand charge”Reduce the monthly “demand charge”• Eliminate the primary power factor Eliminate the primary power factor
surcharge penaltysurcharge penalty– Utilities usually charge customers an Utilities usually charge customers an
additional fee (up to 25% more) when additional fee (up to 25% more) when their power factor is less than 0.85 (PFC their power factor is less than 0.85 (PFC equipment)equipment)
Installing the IER (ES) UnitsInstalling the IER (ES) Units
• 2 Types of installations with the IER 2 Types of installations with the IER (ES)(ES)
Panel Mount Panel Mount – accumulation of smaller – accumulation of smaller inductive loadsinductive loads
• Single Phase panel mountSingle Phase panel mount
• Three Phase panel mountThree Phase panel mount
Equipment Mount Equipment Mount – Larger individual – Larger individual inductive loadsinductive loads
Return on InvestmentReturn on Investment
Depends On:Depends On:• Age of EquipmentAge of Equipment• Percentage of PF optimizationPercentage of PF optimization• kW per hour chargedkW per hour charged• Run time of inductive loadsRun time of inductive loads• Panel mount or equipment mountPanel mount or equipment mount• Amount of equipment and labor Amount of equipment and labor
needed for optimizationneeded for optimization
School District, DESchool District, DE
8 out of 10 Schools
Total = 38% Savings
Measuring Power Factor
Select Power Factor
Clamp Load Wire
Leads on Positive and Ground
Read and record initial power factor and Amps
Initial Amps
33.85
Optimized Amps 27.30
6.55 Amp Difference
19.35% Reduction
How the process works!
• Initial meeting to discuss technology and application for your facility.– This is primarily a discussion that lets you find
out who we are and what we provide.– During this meeting we will gather information
about your facility. This is called a pre assessment review (PAR)
– This information is used to deliver to you an estimate for us to complete an energy analysis of the facility.
Energy Analysis
• An Energy analysis is preformed by a specially trained and licensed electrician/s– Our team will conduct checks of all relevant electrical panels
and individual electric motors– Information that we are gathering is related to Voltage,
Current, Power, and Power Factor– After the initial readings are taken our patented equipment is
hooked up to optimize each load.– Often times the electrician is confronted with situations in your
facility that need immediate attention, this information might not have been discovered until to late, had we not been there. We will immediately notify you if this occurs.
– The analysis process is not typically disruptive to the work force and all of our personnel conduct themselves in a professional manner.
Energy Analysis
• Upon completion of the analysis all data is forwarded to the I.E.R. corporate office for review.
• The review process consist of data obtained, special notes from the electrician and parameters of actually installing the equipment.
• The data will now be compiled into a proposal for customer review.
WHY NOW?
•Conditioned power can increase the life of all electric motors in the facility leading to reduced maintenance costs.
•Up to 25% SAVINGS realized immediately upon installation.
•Environmentally responsible organizations are leading the charge in Protecting, Preserving & Improving our environment.