Premium Complete Rework station
with Pneumatic Pump
Ref. RMVE-C
Español 37
English 3
Page
www.jbctools.com
2 3
Index
Packing list ........................................................... 4
JT Hot Air station
Features .............................................................. 8
Adjustable Stand .............................................. 9
Quick Nozzle Changer .................................. 10
Protectors & Extractors ................................ 11
T260 Pick & Place .......................................... 12
Operation & Process Control with JT ....... 13
JT-TA Replacing the Heating Element ...... 16
JT-TA Changing the Heater Hose Set ...... 17
DDE Control Unit & MVE Module
Features ............................................................ 18
Adjustable Stand ........................................... 20
Tip Cleaner ..................................................... 21
T245 Changing Cartridges ......................... 22
DR560 Changing Tips .................................. 23
DR560 Changing the Heating Element ... 24
DR560 Tin Deposit Cleaning ...................... 25
DR560 Tip Care .............................................. 26
Desoldering Process DDE & MVE ............. 26
MVE Initial Setup ............................................ 27
MVE Changing the pump filters ................. 27
Removing the pneumatic tubing .............. 27
Operation with DDE ...................................... 28
Process Analysis ............................................ 30
Soldering Net .................................................. 31
Working with robots ...................................... 32
Station Sotware .............................................. 32
Maintenance ..................................................... 33
Safety ................................................................... 34
Specifications .................................................. 35
Exploded View ................................................. 70
www.jbctools.com
4 5
Packing List
The following items should be included:
Stand ................................ 1 unit
Ref. AD-SD
Pneumatic Desoldering
Module ............................ 1 unit
Ref. MVE-A
DDE Control Unit .......... 1 unit
Ref. DDE-1B (120V)
DDE-2B (230V)
DDE-9B (100V)
Desoldering Iron ............ 1 unit
Ref. DR560-A
Stand ............................... 1 unit
Ref. DR-SD
General Purpose
Handle ............................... 1 unit
Ref. T245-A
Heater hose set ............ 1 unit
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
Stand ................................ 1 unit
Ref. JT-SD
JTE Control Unit ........... 1 unit
Ref. JTE-1D (120V)
JTE-2D (230V)
JTE-9D (100V)
Tip Cleaner ..................... 1 unit
Ref. CL9885
JT Accessory set
Ref. 0012332
Sponge ............................. 1 unit
Ref. S0354
Metal Brush .................... 1 unit
Ref. CL6217
Cartridges ..................... 2 units
Ref. C245903 (x1)
Ref. C245906 (x1)
* These accessories are not supplied with JT-2QC / JT-1QC / JT-9QC stations.
Extractor stand* ............ 1 unit
Ref. 0008752
Suction Tube*
Ref. 0932330
Suction Cups*
Ref. 0930110
Ø 10 - 0934050 (x3)
Ø 4.7 - 0934070 (x1)
Extractors*
Ref. E2184
E2064
E2052
Protectors*
Ref. P2220
P2230
P2235
P4000
P4010
Tripod*
Ref. T2050 (Ø 39mm)
T2250 (Ø 85mm)
Nozzles
Ref. JN2015 (x1)
JN2012 (x1)
JN2020 (x1)
www.jbctools.com
6 7
Suction Filter ................ 1 unit
Ref. 0821830
Cotton Filter ................... 1 unit
Ref. 0781046
It contains 10 filters
Filter Box ........................ 1 unit
Ref. 0005966
It contains 50 filters
DR560 Accessories
Ref. 0010211
Internal gasket ............ 2 units
Ref. 0812360
Tip cleaning set .......................................... 1 unit
Ref. 0965970
Spanner ........................... 1 unit
Ref. 0780550
Tin deposit .................... 1 unit
Ref. 0812620
Long Tip Cleaning set ........................... 1 unit
Ref. 0965760
Metal tin diposit ........... 1 unit
Ref. 0812630
Tips .............................. 3 units
Ref. C560005
Ref. C560013
Ref. C560004
Manual ............................. 1 unit
Ref. 0017358
Premium Complete Rework station
with Pneumatic Pump
Ref. RMVE-C
Stand Cable ................. 2 units
Ref. 0011283
Power cords
For DDE ........................... 1 unit
Ref. 0013671 (100/120V)
0010569 (230V)
Module Cable ................. 1 unit
Ref. 0014874
Cleaning stick .............. 1 unit
Ref. 0786640
Pick & Place ................... 1 unit
Ref. T260-A
Straight Needles Set ... 1 unit
Ref. 0901546
Bent Needles Set ......... 1 unit
Ref. 0861660
Cups Set ......................... 1 unit
Ref. 0940163
Union Flanges ............... 1 unit
Ref. 0011356
Filter Box .................... 1 unit
Ref. 0780840
It contains
10 filters
Escape Filter .................. 1 unit
Ref. 0008446
For JTE ............................. 1 unit
Ref. 0009417 (100V/120V)
0009401 (230V)
www.jbctools.com
www.jbctools.com
Press PressDo not press
JT Features
8 9
1. From the main Menu, select the mode to activate the tool depending on the task.
2. The tool stops blowing hot air when returned to the stand.
Stand + Autostart OFF Stand + Autostart ON Pedal*
Adjust the tool holder angle to suit your work position.
Press the start/stop button to
blow hot air.
The tool automatically starts
blowing hot air when lifted
from the stand.
Press the Pedal to blow hot
air and release to stop.
*The P-005 Pedal is not
supplied with this station.
See our website.
Power Socket
Optional: P-005 Pedal connection
Fuse
Equipotential connection
Stand Ref. JT-SD
Adjustable Stand
Operation Modes
Another connectable tool:
Precision Heater hose set
Ref: TE-TB
Hot Air button
(On / Off)
Heating
element
Suction TubeRef. 0932330
Heater Hose setRef. JT-T1A (100V/120V) JT-T2A (230V)
For tripods and extractors
Activates the
suction pump
USB-B connector
Update the station
software from
the JBC website
www.jbctools.com
10 11
For small components (fig. 1 and 2). For big components (fig. 3 and 4).
Quick Nozzle Changer Changing nozzles quickly and safely.
Compatible Nozzles The JT-TA works with JT nozzles. Find the model that best suits your soldering needs in www.jbctools.com
21
We recommend using the protector + tripod We recommend using the extractors
Protectors & Extractors
1 2 3 4
Protectors
* Ref. AxB (mm) * Ref. AxB (mm)
P3353 4,3 x 3 48 P2230 15 x 15
P3786 5,2 x 5,2 60 P4010 17 x 17
P3352 5,2 x 7,5 P4005 18 x 29
P3355 5,2 x 9,5 P4030 18,5 x 18,5
P3356 6,2 x 4,2 P1068 18,5 x 24
P3785 7,2 x 7,2 P2685 28,5 x 28,5
P3784 8,2 x 8,2 P4085 31,5 x 31,5
P4035 9 x 13 P2672 33 x 46
P4040 9,5 x 19 P4002 50 x 50
P4080 9,5 x 21 P3357 52,5 x 14
32 P2220 10 x 10
P4045 10,5 x 21
P4090 11 x 16
24 P2235 12 x 17
P1249 12 x 23
44 P4000 12,5 x 12,5
P3354 13,2 x 13,2
P4025 13,5 x 21,5
øD
* Reference Desk
Tripods
* Ref. øC (mm)
T2050 39
T2250 85
Manual extractor
* Ref. øD (mm)
E2190 7
Extractors
* Ref. AxB (mm) * Ref. AxB (mm)
52 E2052 20 X 20 E2124 45 X 45
64 E2064 20 X 26
80 E2184 24 X 24
E2068 27 X 27
E4020 28,5 X 28,5
E4015 31,5 X 31,5
E2084 33 X 33
E2100 38 X 38
In case of a loosely fitting nozzle:
Ref. Shape Size
JN2020 Straight Ø 8mm
JN8417 Straight Ø 10mm
JN2015 Bent Ø 4mm
JN2012 Bent Ø 6mm
JN6633 Bent Ø 8mm
JN7637 Flat 10 x 2mm
JN7638 Flat 20 x 2mm
JN7639 Flat 30 x 2mm
Straight Bent Flat
Ø mm Ø mm A x B mm
1. Push the nozzle tab inwards with a
screwdriver or flat-nosed pliers.
2. Insert the nozzle into the JT-TA Heater again.
Turn the tool off and handle with care. The heating element and the nozzle are still hot.
Tripod
Tripod
Protector
Protector
www.jbctools.com
Temp ºC Air % Time to stop 45 seconds
Power 70%
400 85400ºC Select
Choose the suction cup that best fits the component (Maximum working temp.: 250ºC / 482ºF):
12 13
1. Suction 2. Release
This tool helps you easily place and remove SMDs of any size using the suction provided by the station.
T260 Pick & Place
Press the button to
start/stop the suction
Once activated
the suction button,
cover the pen hole
with your finger and
pick the component.
Insert the needle
with the appropriate
cup for a correct
suction process.
Lift your finger
to release the
component on the
appropriate place.
You should avoid the
needle to stick out of
the lower part.
Operation with JT station
Process Control
3. Releasing1. Placing 2. Heating
Operation
Pick & Place
Ref. T260-A
Position the suction cup. Push the button for hot air
heating. The solder melts.
The component lifts off
automatically.
Access Menu (pess key 2 seconds) & Confirm Selection
Selected temperature
Current temperature
% Instant power supplied to heater
You can switch between operating modes (Manual Mode / Profile Mode) by pressing the “increa-
se” and “decrease” keys simultaneously for 2 seconds. (Only when mode profiles is ON)
Manual mode
www.jbctools.com
Temp ºCºCProgram 8
380Air 100%Time 125s.
Main menu
1 Reset settings2 Station Settings3 Program Settings4 Counters
5 Program versionExit
Sett ings Program Sett ings
Edit Program
Edit Program 8
1 Temp unit Celsius2 Maximum temp 4500C3 Minimum temp T OFF*4 Fix temp 4000C
5 Temp Adjust 00C6 Max air 100%7 Min air 10%8 Fix air 40%9 Time to stop 120 sec10 Beep ON11 Pop up ON12 Change PIN
1 Programs2 Edit program3 Copy program4 Delete program
Back
SelectProgram
Step 4Time 20Temp 450Air 100
ºC
ºC
8
Exit
Counters
1 Station ON hours 02 Works hours 03 Works cycles 0
Back
14 15
Decrease program number
Increase program number
Selected program
Current temperature
Selected flowGraph of selected
programRemaining time
Program mode
Program Options
Edit Program
This option allows you to edit or create a program.
First , you must select the program to edit and then modify the points that make up the program.
Each program is composed of 9 points, each point consisting of 3 parameters:
1. Time (seconds)
2. Temperature (°C / °F)
3. Flow rate (%)
You can delete the last point of the program by selecting “-----” in the time parameter.
It should be taken into account that the regulation range permitted by the station is 150-450°C,
whereby it is not possible to create temperature ramps between room temperature (Toff) and
150°C.
The station can store up to 25 temperature programs.
The first three programs are edited by JBC as an example.
Copy Program
This option allows you to copy a program.
You must select the program source and the program destination (where it will be copied).
Delete Program
This option will allow you to delete a previously selected program.
* Selecting Minimum Temp to
“T OFF” allows for blowing at
ambient temperature.
Menu screen
Original PIN: 0105
www.jbctools.com
16 17
Only perform this operation when the element is cold and the unit is disconnected from the mains.
1. Loosen the screw.
2. Pull the heating element away from the handle.
3. Connect the new heating element, ensuring its pushed all the way in.
4. Tighten the screw.
JT-TA Replacing the Heating Element
Heating Hose SetRef. JT-T1A (100V / 120V) JT-T2A (230V)
Heating ElementRef. 0014107 (230V) 0014105 (100V / 120V)
JT HandleRef. JT-A
1. Ensure that the tool is turned off.
2. Use a spanner to unscrew the connecting nut.
3. The tube end of the new heater must be inserted so that the longitudinal rib fits into the groove.
5. Follow the same steps conversely.
JT-TA Changing the Heater Hose Set
www.jbctools.com
DDE & MVE Features
Work simultaneously with up to 2 tools and join each station port with 1 module + 1 pedal (Peripherals).
Stand
Ref. AD-SD
General Purpose Handle
Ref. T245-A
RJ12 connector for Robot
USB-B connector
Equipotential connection
Power Socket
Desoldering IronRef. DR560-A
Cartridge Ref. C245903Ref. C245906
Tip Ref. C560004Ref. C560005Ref. C560013
Pneumatic Desoldering Module
Ref. MVE-A
18 19
Stand
Ref. DR-SD
Stand Cable
Ref. 0011283
Suction FilterRef. 0821830
Module Cable Ref. 0014874
USB-A connector2,8” Color TFT screen
Tilt the display for easy reading
To another module
To PedalRef. P-005
Air pressure (4-6 bar)
www.jbctools.com
Stand
Ref. AD-SD
20 21
Quick tip changer
Permits switching
cartridges without
interrupting
your work.
Adjustable
tool holder
Suits your
work
position.
Adjustable
cable
collector
Adjustable Stands
Stand
Ref. DR-SD
Quick tip changer
Holding tip system
for easy change.
Cable collector
Keeps working area free of cable.
It can be easily removed for cleaning.
Maintenance
Improve thermal transfer by cleaning the tip after each solder joint.
Tip Cleaner
Optional
Brass wool
Ref. CL6210
Inox wool
Ref. CL6205
Brushes
Ref. CL6220
Tip-tinner
Ref. TT-A
Sand
Ref. CL6211
Splashguard
Non-slip base
Sponge
Ref. S0354
Wiper
Ref. CL0236
Very effective cleaning
method. It leaves a small layer
of solder on the tip to prevent
oxidation between cleaning
and rewetting.
It prevents splashing of
solder particles when
using the brass wool. Heavy weighted non-
slip base for simple-
handed cleaning.
The least harmful cleaning
method. Keep the sponge damp
with distilled water when working
to avoid tip wear.
A temperature resistant
receptacle lets the operator
remove excess solder by
gentle tapping or wiping.
It can be easily removed for
cleaning.
Tapping: Wiping:
Tap gently to remove
excess solder.
Use the slots to
remove remaining
particles.
www.jbctools.com
ø 1ø 1,5
ø 3,5
A A B
A ø
B ø
22 23
T245 Changing Cartridges
1. Removing 2. Inserting 3. Fixing
Place the handle in the
extractor and pull to
remove the cartridge.
Place the handle on top of
the new cartridge and press
down slightly.
Use the holes for fixing the
cartridge* as follows:
A. For straight C210.
B. For curved C210.
C. For curved C245.
D. For straight C245.
*Important It is essential to insert the cartridges as far as the mark for a proper connection.
BC
A
D
Compatible cartridges The T245 handle works with C245 cartridges. Find the model that best suits your soldering needs
in www.jbctools.com
Round Chisel Round bent Bevel Special models
Save time and change cartridges safely without switching the station off.
DR560 Changing Tips
This operation should be done while the tip is hot, not below 250°C, so that any tin left inside is in
molten state.
250ºC minimum
C560-001 C560-002
C560-003
C560-004 C560-009
C560-014
C560-001 ØA=1,4 ØB=0,6 Ømax. pin=0,4 C560-002 ØA=1,8 ØB=0,8 Ømax. pin=0,6
C560-003 ØA=2,7 ØB=1 Ømax. pin=0,8
C560-004 ØA=3,2 ØB=1,3 Ømax. pin=1,1 C560-009 ØA=5 ØB=1,3 Ømax. pin=1,1
C560-014 ØA=2,5 ØB=0,8 Ømax. pin=0,6
1. RemovingUnscrew the tip using the spanner
supplied.
2. InsertingFit the new tip and tighten with the
spanner to make sure it is air tight.
Compatible Tips The DR560 works with C560 tips. Find the model that best suits your soldering needs in www.jbctools.com
Here are some C560 tips in real size (mm):
www.jbctools.com
Mark
24 25
DR560 Changing the Heating Element
1. Loosening The deposit lid needs to be
loosened.
2. Removing Loosen the screw as shown
and remove the
Heating Element.
3. Placing Place the new Heating
Element and follow the steps
conversely.
2
1
3
To perform this operation, turn off the station or disconnect the tool.
ImportantFor a proper connection it is essential to insert the cartridge by lining it up to the mark .
DR560 Tin Deposit Cleaning
1. Removing the lid
3. Inserting the deposit
Check filter
Lid
Check internal joint
2. Cleaning
The filter and internal joint must be checked
and replaced if dirty or damaged.
Remove the coil to clean the inside of the
deposit with the stick supplied.
The lid must be removed with the DR560 in
vertical position.
The deposit must be inserted with coil filter in
place, positioned between the 2 lines marked
on the tin deposit.
Then the whole unit must be closed by
screwing the lid.Marks
www.jbctools.com
26 27
Desoldering process
Use a tip with a larger diameter than the pad to achieve maximum aspiration and thermal efficiency.
Place the tip with the
component terminal in the
hole.
After pressing the desoldering key there is a slight delay until the self-contained vacuum pump
stops. This makes sure that the vacuum circuit is completely empty. If any solder remains are left
on a terminal after desoldering it, resolder it with fresh solder and repeat the desoldering operation.
When the solder liquefies,
gently rotate the tip so that
the compo nent terminal can
be lifted off.
Press the vacuum pump
button long enough to remove
the solder.
3. Aspirating1. Placing 2. Rotating
The intake tube should be periodically cleaned by the largest rod.
DR560 Tip Care
ImportantDO NOT press the vacuum pump button while tinning the desoldering tip, as the fumes given
off by the flux would quickly block the ducts and the air filter.
MVE Changing thepump filters
- Use a damp cloth to keep the casing clean.
- Periodically check all cable and tube
connections.
- Keep filters clean to ensure proper solder
suction and replace them when
necessary.
1. Select the module from the list of
peripheral connections. Remember your first
connection is denoted as “a”, the second
being “b”, etc. (e.g. MVE_a, MVE_b,...)
2. Press Menu or Back to save changes.
Once set up, you can change the module
settings by entering the Peripherals Menu.
MVE Initial Setup
Peripherals
After connecting the pneumatic desoldering module (MVE-A), enter the
Peripherals Menu and select the port which you want to join with the module.
Spare filtersRef. 0005966
Cotton filters Ref. 0781046
Suction filter Ref. 0821830
O Ring Ref. 0007717
Filter coverRef. 0004710
Escape filterRef. 0008446
Peripherals Port 2-DR
17:14
Pedal None
Module NoneModule
MVE_a
None
Removing the pneumatic tubing
- Push the release ring to remove the
pneumatic tubing.
1
2
Release
ring
Important: Do not use sharp pointed objects to open the suction filter.
www.jbctools.com
350ºC
Port2
Power45%
Temp. Levels
T245
250 350 380
17:14
28 29
Port2
T245
17:14
3. Hibernation
Operation
The JBC Exclusive Heating SystemOur revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.
1. Work 2. Sleep
When the tool is lifted from the
stand the tip will heat up to the
selected temperature.
When the tool is in the stand,
the temperature falls to the
preset Sleep temperature.
After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
Tools Menu:
· Set Sleep temperature
· Set Sleep delay
(from 0 to 9 min or no Sleep)
· Set Hibernation delay
(from 0 to 60 min or no
hibernation)
Tools Menu: Tools Menu:
Long time in the stand
· Set temperature limits
· Select temperature levels
350ºC
Port2
Power45%
T245
17:14
Selected 350ºC
SleepTool in the standActual Temp. 180ºCDelay to hibernation: 29:30
Port2
T245
17:14
HibernationActual Temp. 25ºC
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Station software update. Press INFO to start the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description, the type of error and how to proceed.
System notifications (Status Bar)Menu Options
Station Information
Power indicator
Toolin use
Work Screen
Status bar
The DDE offers an intuitive user interface which provides quick access to station parameters.
Change port
Displayed if temperature levels are activated
Station Tools Counters
ResetGraphicsPeripherals
Press INFO for each parameter description.
www.jbctools.com
Port 1 - T245
450
400
350
300
250
150
100
50
200
Power Temp
17:14
30 31
By pressing Graphics in the main MENU, temperature and power figures in real
time are displayed for each port. This helps you decide which tip to use to obtain
the best quality solder joints.
Process analysis
Export graphicsInsert a USB flash drive into the USB-A
connector to save your soldering process in
csv format.
Graphics
Temperature
Power (%)
See otherport graphic
Soldering Net
Remotely manage and monitor as many stations as your PC can handle.
Functions:
- Set all the station parameters from your PC.
- Organize groups of stations and set all their parameters at the same time.
- Store specific configurations for later uses.
- Analyze the soldering graphics of the stations on your PC and export them.
1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html
2. Connect the stations via USB-B connector and the PC will automatically detect them.
3. The notification will be displayed on the station.
any JBC station
JBC Manager software
USB Hub
www.jbctools.com
32 33
Clean periodically
Maintenance
1. Connect the tool to the station port by means of the CHB-A Converter.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapater available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot’s commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html.
Manage and monitor the station using a Robotic system.
Working with Robots
Control Unit
Robot
Update the station software
1. Download the JBC Update File from
www.jbctools.com/software.html and save
it on a USB flash drive. Preferably one with
no other files.
JBC Update File
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
1. Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2. Press the new fuse into the fuse holder
and replace it in the station.
- Use a damp cloth to clean the casing and
the tool. Alcohol can only be used to clean
the metal parts.
- Periodically check that the metal parts of
the tool and stand are clean so that the
station can detect the tool status.
Fuse holder
Fuse holder
- Maintain tip surface clean and tinned prior
to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat
transfer to the solder joint.
- Periodically check all cables and tubes.
CHB-A ConverterRef. CHB-A
2. Insert the USB flash drive to the station.
The icon is diplayed while updating.
Fuse
RS-232connection
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
www.jbctools.com
34 35
Safety
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station is
turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
Specifications
Complete Rework station with Pneumatic PumpRMVE-1C / RMVE-2C / RMVE-9C - Total weight: 15.8 kg (35 lb) - Ambient Operating Temperature: 10 to 40ºC (50-104ºF)
JTE-1D 120V 50/60Hz. Input fuse 8A JTE-2D 230V 50/60Hz. Input fuse 4A JTE-9D 100V 50/60Hz. Input fuse 8A - Weight: 5.7 kg (12.6 lb) - Dimensions: 148 x 184 x 140 - Nominal Power: 700W - Temperature range: Room temperature / 150ºC to 450°C (300ºF to 840ºF) Cool mode: T Off. Used to blow air at room temperature. - Air flow regulation: 10-50 SLPM - Vacuum: 30% / 228 mmHg / 9 inHg - USB interface station-PC - P-005 Pedal connection
DDE-1B 120V 50/60Hz. Input fuse: 4A. Output: 23.5V DDE-2B 230V 50/60Hz. Input fuse: 2A. Output: 23.5V DDE-9B 100V 50/60Hz. Input fuse: 5A. Output: 23.5V - Weight: 4.3 Kg (9.4 lb) - Dimensions: 148 x 120 x 232 mm - Output Peak Power: 150W per tool - Temperature Range: 90-450°C (190-840 ºF) - Idle Temp. Stability (still air): ±1.5 ºC (±3 ºF) - Tip to ground resistance: <2 ohms - Tip to ground voltage: <2mV RMS - USB-A / USB-B / Peripherals connectors - RJ12 connector for Robot
MVE-A - Weight: 1 Kg (2.2 lb) - Dimensions: 145 x 55 x 225 mm - Air Pressure supply range: 4-6 Bar - Vacuum at 6 Bar: 90% / 680 mmHg / 26.8 inHg - Flow rate: 15 SLPM - P-005 Pedal connection
Complies with CE standardsESD protected housing “skin effect”
www.jbctools.com
36 37
Índice
Composición .................................................... 38
JT Estación de Aire Caliente
Características ................................................42
Soporte ajustable .......................................... 43
Extractor de boquillas ................................. 44
Protectores y extractores ............................ 45
T260 Lápiz posicionador ............................. 46
Funcionamiento y Control del proceso..... 47
JT-TA Reemplazar elemento calefactor.... 50
JT-TA Cambiar el conjunto calefactor........ 51
DDE Unidad de Control y MVE módulo
Características ............................................... 52
Soportes ..........................................................54
Limpiador de Puntas ................................... 55
T245 Cambiar Cartuchos ............................ 56
DR560 Cambiar Puntas ............................... 57
DR560 Cambiar elemento calefactor ...... 58
DR560 Limpiar depósito de estaño ......... 59
DR560 Mantenimiento de las puntas ...... 60
Desoldar con la DDE y el MVE .................. 60
MVE Puesta en marcha ............................... 61
MVE Cambiar los filtros ............................... 61
Cambiar el tubo del módulo ....................... 61
Funcionamiento ............................................. 62
Pantalla de trabajo ....................................... 63
Análisis del proceso ...................................... 64
Red de Soldadura ......................................... 65
Trabajar con Robots ..................................... 66
Actualizar el Sotware de la estación ........ 66
Mantenimiento ................................................ 67
Seguridad ......................................................... 68
Especificaciones ........................................... 69
Despiece ........................................................... 70
www.jbctools.com
38 39
Stand
Soporte .............. 1 unidad
Ref. AD-SD
Desoldering Iron
Desoldador .................. 1 unidad
Ref. DR560-A
Stand
Soporte .............. 1 unidad
Ref. DR-SD
Heater hose set
Conjunto calefactor ......... 1 ud
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
Stand
Soporte ....................... 1 unidad
Ref. JT-SD
JTE Control Unit
Unidad de Control JTE ... 1 ud
Ref. JTE-1D (120V)
JTE-2D (230V)
JTE-9D (100V)
Conjunto de accesorios JT
Ref. 0012332
Cartridges
Cartuchos ....................... 2 units
Ref. C245903 (x1)
Ref. C245906 (x1)
* Estos accesorios no se suministran con las estaciones JT-2QC / JT-1QC / JT-9QC.
Extractor stand*
Soporte de extractores ..... 1ud
Ref. 0008752
Suction Tube*
Tubo de succión
Ref. 0932330
Suction Cups*
Ventosas
Ref. 0930110
Ø 10 - 0934050 (x3)
Ø 4.7 - 0934070 (x1)
Extractors*
Extractores
Ref. E2184
E2064
E2052
Protectors*
Protectores
Ref. P2220
P2230
P2235
P4000
P4010
Tripod* · Tripode
Ref. T2050 (Ø 39mm)
T2250 (Ø 85mm)
Nozzles
Boquillas
Ref. JN2015 (x1)
JN2012 (x1)
JN2020 (x1)
Pneumatic Desoldering
Module
Módulo desoldador
neumático .................... 1 unidad
Ref. MVE-A
DDE Control Unit
Unidad de Control DDE ..... 1 ud
Ref. DDE-1B (120V)
DDE-2B (230V)
DDE-9B (100V)
General Purpose Handle
Mango para aplicaciones
generales ............ 1 unidad
Ref. T245-A
Composición
Los siguientes artículos deberían estar incluidos:
Tip Cleaner
Limpiador de puntas ........ 1 ud
Ref. CL9885
Metal Brush
Cepillo metálico ......... 1 unidad
Ref. CL6217
Sponge
Esponja ....................... 1 unidad
Ref. S0354
www.jbctools.com
40 41
Accessorios del DR560
Ref. 0010211
Manual ....................... 1 unidad
Ref. 0017358
Cables de red
Para DDE ................... 1 unidad
Ref. 0013671 (100/120V)
0010569 (230V)
Cleaning stick
Bastoncillo de limpieza ... 1 ud
Ref. 0786640
Pick & Place
Lápiz posicionador ... 1 unidad
Ref. T260-A
Straight Needles Set
Conjunto de agujas
rectas ........................... 1 unidad
Ref. 0901546
Bent Needles Set
Conjunto de agujas
dobladas ..................... 1 unidad
Ref. 0861660
Suction Cup Set
Conjunto de ventosas ..... 1 ud
Ref. 0940163
Escape Filter
Filtro de escape .......... 1 unidad
Ref. 0008446
Premium Complete Rework station
with Pneumatic Pump
Ref. RMVE-C
Para JTE ..................... 1 unidad
Ref. 0009417 (100V/120V)
0009401 (230V)
Tip cleaning set
Juego de limpieza de puntas ............... 1 unidad
Ref. 0965970
Long Tip Cleaning set
Juego de limpieza de puntas largo ........ 1 ud
Ref. 0965760
Tips
Puntas ................. 3 unidades
Ref. C560005 (x1)
Ref. C560013 (x1)
Ref. C560004 (x1)
Tin deposit
Depósito de estaño ......... 1 ud
Ref. 0812620
Spanner
Llave ........................... 1 unidad
Ref. 0780550
Filter Box
Caja de filtros ....... 1 unidad
Ref. 0780840
Contiene 10 filtros
Internal gasket
Casquillo junta
interior ................... 2 unidades
Ref. 0812360
Metal tin diposit
Depósito de metal
para estaño ............... 1 unidad
Ref. 0812630
Cotton Filter
Filtros de algodón ... 1 unidad
Ref. 0781046
Contiene 10 filtros
Filter Box
Caja de filtros ............ 1 unidad
Ref. 0005966
Contiene 50 filtros
Suction Filter
Filtro de aspiración ... 1 unidad
Ref. 0821830
Stand Cable
Cable del soporte .......... 2 uds
Ref. 0011283
Module Cable
Cable del módulo .... 1 unidad
Ref. 0014874
Union Flanges
Bridas de unión ......... 1 unidad
Ref. 0011356
Contiene 2 bridas
www.jbctools.com
www.jbctools.com
JT Características
Pulse PiseNo
pulse
42 43
1. Desde el menú principal, seleccione el modo de activación de la herramienta en función de la
tarea a desarrollar.
2. La herramienta deja de emitir aire caliente cuando se deja en el soporte.
Soporte + Autostart OFF Soporte + Autostart ON Pedal*
El elemento ajustable del soporte se adapta a su posición de trabajo.
Pulse el interruptor para emitir
aire caliente.
La herramienta se activa
automáticamente cuando se
levanta del soporte.
Use el pedal para el control
del calefactor.
*El pedal P-005 no se incluye
en esta estación.
Consulte nuestra web.
Elemento
calefactor
Suction Tube
Tubo de succión
Ref. 0932330
Heater Hose set Conjunto calefactorRef. JT-T1A (100V - 120V) JT-T2A (230V)
Para trípodes y
extractores
Activación de
la bomba de
succión
USB-B connector
Actualice el software
de la estación en
www.jbctools.com
Interruptor para
aire caliente
(ON / OFF)
Otra herramienta conectable:
Precision Heater hose set
Conjunto calefactor de precisión
Ref: TE-TB
Entrada de red
Fusible
Conexión equipotencial
Al PedalRef. P-005 Con el pedal pulsado se emite aire caliente.
Soporte ajustable
Modos de operación
SoporteRef. JT-SD
www.jbctools.com
44 45
Para componentes pequeños (fig. 1 y 2) Para componentes grandes (fig. 3 y 4)
Extractor de boquillas Changing nozzles quickly and safely.
21
Boquillas compatibles El JT-TA funciona con las boquillas JT. Encuentre el modelo que mejor se ajuste a sus necesidades de
trabajo en www.jbctools.com
Protectores y extractores
Recomendamos usar extractoresRecomendamos usar protector + trípode
1 2 3 4
Protectores
* Ref. AxB (mm) * Ref. AxB (mm)
P3353 4,3 x 3 48 P2230 15 x 15
P3786 5,2 x 5,2 60 P4010 17 x 17
P3352 5,2 x 7,5 P4005 18 x 29
P3355 5,2 x 9,5 P4030 18,5 x 18,5
P3356 6,2 x 4,2 P1068 18,5 x 24
P3785 7,2 x 7,2 P2685 28,5 x 28,5
P3784 8,2 x 8,2 P4085 31,5 x 31,5
P4035 9 x 13 P2672 33 x 46
P4040 9,5 x 19 P4002 50 x 50
P4080 9,5 x 21 P3357 52,5 x 14
32 P2220 10 x 10
P4045 10,5 x 21
P4090 11 x 16
24 P2235 12 x 17
P1249 12 x 23
44 P4000 12,5 x 12,5
P3354 13,2 x 13,2
P4025 13,5 x 21,5
øD
* Referencia del soporte de extractores
Tripodes
* Ref. øC (mm)
T2050 39
T2250 85
Extractor manual
* Ref. øD (mm)
E2190 7
Extractores
* Ref. AxB (mm) * Ref. AxB (mm)
52 E2052 20 X 20 E2124 45 X 45
64 E2064 20 X 26
80 E2184 24 X 24
E2068 27 X 27
E4020 28,5 X 28,5
E4015 31,5 X 31,5
E2084 33 X 33
E2100 38 X 38
Para una mejor sujeción de la boquilla:
1. Empuje la lengüeta hacia dentro con la ayuda
de un destornillador o unos alicates planos.
2. Inserte la boquilla en el conjunto calefactor.
Apague la herramienta y maneje con cuidado. El elemento calefactor y la boquilla todavía están calientes.
Ref. Forma Medida
JN2020 Recta Ø 8mm
JN8417 Recta Ø 10mm
JN2015 Doblada Ø 4mm
JN2012 Doblada Ø 6mm
JN6633 Doblada Ø 8mm
JN7637 Plana 10 x 2mm
JN7638 Plana 20 x 2mm
JN7639 Plana 30 x 2mm
Recta Doblada Plana
Ø mm Ø mm A x B mm
Tripode
ProtectorTripodeProtector
www.jbctools.com
Temp ºC Air % Time to stop 45 seconds
Power 70%
400 85400ºC Select
Elija la ventosa que mejor se adapte al componente (Temp. máxima de trabajo: 250ºC / 482ºF):
46 47
T260 Lápiz posicionador
Apriete para
iniciar o detener
la succión
Inserte la aguja en la
ventosa apropiada
para una succión
correcta.
Evite que la aguja
sobresalga de la parte
inferior de la ventosa.
Esta herramienta permite colocar y retirar SMDs fácilmente gracias al sistema de succión de la unidad.
1. Succionar
Funcionamiento
2. Soltar
Una vez activado el
botón de succión,
cubra el agujero del
lápiz con el dedo
hasta y recoja el
componente.
Levante el dedo del
agujero para soltar
el componente en el
sitio adecuado.
Funcionamiento de la JT
Control del proceso
3. Soltar1. Colocar 2. Calentar
Pick & PlaceLápiz posicionador
Ref. T260-A
Posicione la ventosa y
apriete el botón de succión.
Proyecte aire caliente con el
conjunto calefactor.
El componente se levantará
automáticamente cuando el
estaño se derrita.
Confirme la selección Para acceder al Menú (apriete 2 segundos)
Temperatura seleccionada
Temperatura actual
% potencia
Puede intercambiar los modos (manual / programa) apretando las teclas “aumentar” o “disminuir”
simultáneamente durante 2 segundos (sólo si el modo programa está activo).
Modo manual
www.jbctools.com
Temp ºCºCProgram 8
380Air 100%Time 125s.
Main menu
1 Reset settings2 Station Settings3 Program Settings4 Counters
5 Program versionExit
Sett ings Program Sett ings
Edit Program
Edit Program 8
1 Temp unit Celsius2 Maximum temp 4500C3 Minimum temp T OFF*4 Fix temp 4000C
5 Temp Adjust 00C6 Max air 100%7 Min air 10%8 Fix air 40%9 Time to stop 120 sec10 Beep ON11 Pop up ON12 Change PIN
1 Programs2 Edit program3 Copy program4 Delete program
Back
SelectProgram
Step 4Time 20Temp 450Air 100
ºC
ºC
8
Exit
Counters
1 Station ON hours 02 Works hours 03 Works cycles 0
Back
48 49
Disminuir número de programa
Aumentar número de programa
Programa seleccionado
Temperatura actual
Caudal seleccionadoGráfico del programa
seleccionadoTiempo restante
Modo programa
Opciones de Programa
Edit Program
Esta opción le permite crear o editar un programa. Seleccione un número de programa a editar y
modifique los puntos en función de sus necesidades de trabajo. Cada programa se compone de 9
puntos y cada punto consiste en 3 parámetros:
1. Tiempo (segundos)
2. Temperatura (°C / °F)
3. Caudal de Aire (%)
Puede borrar el último punto del programa seleccionando “-----” en el parámetro Tiempo.
Tenga en cuenta que el rango de temperatura permitido por la estación es 150- 450°C, por lo que
no es posible crear rampas de temperatura entre la temperatura ambiente y los 150°C.
La estación puede almacenar hasta 25 programas de temperatura. Los primeros 3 programas
que muestra la estación han sido editados por JBC a modo de ejemplo.
Copy Program
Esta opción le permite copiar un programa. Seleccione la opción “program source” e indique
el programa que quiere copiar. A continuación seleccione “program destination” e indique el
programa donde será copiado. En el momento de salir (Exit) podrá salvar los cambios.
Delete Program
Esta opción le permite borrar un programa previamente seleccionado.
* Seleccionando “T OFF” en la
Mínima temperatura permite la
emisión de aire ambiente.
Pantallas de Menú
PIN original: 0105
www.jbctools.com
50 51
Heating Hose SetConjunto calefactorRef. JT-T1A (100V / 120V) JT-T2A (230V)
Heating Element Elemento calefactorRef. 0014107 (230V)
0014105 (100V / 120V)
Asegúrese que el elemento calefactor está frío y la unidad de control desconectada de la red.
1. Afloje el tornillo.
2. Tire del elemento calefactor y sáquelo del mango.
3. Conecte el nuevo elemento calefactor hasta que encaje lo más adentro posible.
4. Atornille de nuevo.
JT-TA Reemplazar el elemento calefactor
1. Apague la herramienta.
2. Desenrosque la tuerca de conexión con la ayuda de una llave inglesa.
3. Encaje el extremo del nuevo conjunto calefactor en la unidad de control.
4. Siga los mismos pasos al revés.
JT-TA Cambiar el conjunto calefactor
JT HandleManguera JT-A
Ref. JT-A
www.jbctools.com
Pneumatic Desoldering Module
Módulo desoldador neumático
Ref. MVE-A
52 53
A otro periférico
Al PedalRef. P-005
Presión aire (4-6 bar)
Características DDE y MVE
Trabaje simultáneamente con 2 herramientas y enlace cada puerto con 1 módulo + 1 pedal (Peripherals).
Stand Soporte
Ref. AD-SD
General Purpose Handle
Mango para aplicaciones generales
Ref. T245-A
Conector RJ12 para Robot
Conector USB-B
Conexión equipotencial
Toma de correinte
Desoldering IronDesoldador
Ref. DR560-A
CartridgeCartucho
Ref. C245903Ref. C245906
TipPunta
Ref. C560004Ref. C560005Ref. C560013
StandSoporte
Ref. DR-SD
Stand Cable
Cable del soporte
Ref. 0011283
Suction FilterFiltro de succiónRef. 0821830
Conector USB-A
Pantalla color TFT de 2,8”
Incline la pantalla para una mejor lectura
Module Cable Cable del móduloRef. 0014874
www.jbctools.com
54 55
Se puede quitar fácilmente para su limpieza.
Mejore la transferencia térmica de la punta limpiándola después de cada soldadura.
Limpiador de Puntas
Brass wool
Lana de latón
Ref. CL6210
Protección
anti-salpicaduras Limpiador
Ref. CL0236
Método de limpieza
muy efectivo. Deja una
fina capa de soldadura
en la punta para
prevenir la oxidación
entre la limpieza y la
rehumectación.
Previene las
salpicaduras de
partículas de soldadura.
Para esponja: Para cepillos: Golpeteo: Limpieza: Mantenimiento
Golpe suave para retirar restosde soldadura.
Ranuras para retirar partículas adheridas.
Base
antideslizante
Sponge
Esponja
Ref. S0354
No es necesario sujetar
la base.
El método de limpieza
más eficaz y menos
dañino. Mantenga la
esponja húmeda con agua
destilada, así evitará el
desgaste de la punta.
Receptáculo resistente a la temperatura para eliminar
el exceso de soldadura golpeteando y limpiando.
Cambio rápido
de cartuchos
Cambie cartuchos
sin interrumpir
su trabajo
Soporte de
herramienta
ajustable
Se adapta a
su posición
de trabajo.
Recogecable
ajustable
Soportes ajustables
Stand
Soporte
Ref. DR-SD
Cambio rápido
de puntas
El sistema de
sujeción de puntas
facilita el cambio.
Recogecable
Mantiene el área de trabajo ordenada sin cable
Stand
Soporte
Ref. AD-SD
Opcional
Inox wool
Lana inoxidable
Ref. CL6205
Brushes
Cepillos de metal
Ref. CL6220
Tip-tinner
Reestañador de puntas
Ref. TT-A
Sand · Arena
Ref. CL6211
www.jbctools.com
ø 1ø 1,5
ø 3,5
A A B
A ø
B ø
56 57
BC
A
D
C560-001 C560-002
C560-003
C560-004 C560-009
C560-014
Cambiar cartuchos del T245
1. Retirar 2. Insertar 3. Fijar
Coloque el soldador en el
extractor y tire para retirar
el cartucho.
Coloque el mango soldador
en la parte superior del
nuevo cartucho y presione
ligeramente.
Fije el cartucho* utilizando
los agujeros:
A. Para los C210 rectos.
B. Para los C210 curvados.
C. Para los C245 curvados.
D. Para los C245 rectos.
*Importante
Es necesario insertar el cartucho hasta la marca para una conexión correcta.
Marca
Cartuchos compatiblesEl mango para soldador T245 funciona con cartuchos C245. Encuentre el modelo que mejor se
adapte a sus necesidades de soldadura en www.jbctools.com
Redondo Cincel Redondo curvado
Bisel Modelos especiales
Ahorre tiempo cambiando los cartuchos de forma rápida y segura sin apagar la estación.
Cambiar puntas del DR560
Esta operación debe realizarse con la punta caliente (por encima de los 250°C) para que el estaño
de su interior se mantenga fundido.
250ºC mínimo
C560-001 ØA=1,4 ØB=0,6 Ømax. pin=0,4 C560-002 ØA=1,8 ØB=0,8 Ømax. pin=0,6
C560-003 ØA=2,7 ØB=1 Ømax. pin=0,8
C560-004 ØA=3,2 ØB=1,3 Ømax. pin=1,1 C560-009 ØA=5 ØB=1,3 Ømax. pin=1,1
C560-014 ØA=2,5 ØB=0,8 Ømax. pin=0,6
1. RetirarDesenrosque la punta utilizando la llave
suministrada.
2. InsertarColoque la punta nueva y enrósquela
con la llave para asegurarse que queda
hermético.
Puntas compatibles El DR560 funciona con puntas C560.
Encuentre el modelo que mejor se adapte a sus necesidades de desoldadura en www.jbctools.com
Algunas de las puntas
C560 en tamaño real
(mm):
www.jbctools.com
58 59
DR560 Cambiar el elemento calefactor
1. Desenroscar Desenrosque la tapa del
depósito.
2. Retirar Afloje el tornillo y retire el
elemento calefactor.
3. Colocar Coloque el nuevo elemento
calefactor hasta la marca* y
siga los mismos pasos a la
inversa.
2
1
3
Para realizar esta operación apague la estación o desconecte la herramienta.
*ImportantePara una conexión apropiada es necesario insertar el cartucho alineándolo con la marca .
DR560 Limpieza del depósito de estaño
1. Retirar la tapa
3. Insertar el depósito
Compruebe el filtro
Tapa
Compruebe la junta interna
2. Limpiar
El filtro y la junta interna deben supervisarse
para reemplazarlos si fuera necesario, ya sea
por exceso de suciedad o por algún daño.
Retire el espiral para limpiar el interior del
depósito con la baqueta suministrada.
La tapa se debe retirar con el desoldador en
posición vertical.
El depósito se debe insertar con el espiral ya
colocado entre las dos marcas.
Concluya el proceso cerrando el depósito
con la tapa.Marcas
www.jbctools.com
60 61
Peripherals Port 2-DR
17:14
Pedal None
Module NoneModule
MVE_a
None
Cambiar los filtros de la bomba MVE
Escape filterFiltro de escapeRef. 0008446
Cambiar el tubo delmódulo
- Presione el anillo de liberación para extraer
el tubo del módulo.
1
2
Anillo de
liberación
Importante: No utilice objetos punzantes para abrir el filtro de aspiración.
Proceso de desoldadura
La punta elegida debe tener un diámetro más grande que el pad para conseguir la máxima aspiración
posible y el mejor rendimiento térmico.
Coloque la punta en el
terminal del through-hole
tal y como se muestra.
Tras pulsar el botón del desoldador hay un ligero retraso hasta que la bomba de succión se
detiene. Esto asegura que el conducto de succión está completamente vacío.
Si se quedaran restos de soldadura en algun terminal después de desoldarlo, vuelva a soldarlo
con estaño nuevo y repita el proceso de desoldadura.
Cuando la soldadura se liqüe,
gire la punta con suavidad
para que el terminal del
componente se suelte.
Pulse el botón de la bomba
de succión hasta retirar
por completo los restos de
soldadura.
3. Aspirar1. Colocar 2. Rotar
El conducto de entrada se debe limpiar periódicamente con la baqueta más grande posible.
Mantenimiento de puntas del DR560
ImportanteNO pulse el botón de la bomba de succión mientras estaña la punta, ya que los humos produ-
cidos por el flujo bloquearían rápidamente los conductos y el filtro de aire.
- Limpie la carcasa con un paño húmedo.
Asegúrese que utiliza un paño suave para
el frontal.
- Revise periódicamente los cables y tubos.
- Mantenga los filtros limpios para garantizar
una correcta aspiración y reemplácelos si
fuera necesario.
FiltrosRef. 0005966
Suction filterFiltro de aspiración Ref. 0821830
Anillo Ref. 0007717
Tapa de filtros Ref. 0004710
1. Seleccione el módulo del listado de
conexiones periféricas. Recuerde que su
primera conexión se indica como “a”, la
segunda como “b”, etc. (MVE_a, MVE_b,...)
2. Pulse Menu o Back para guardar los
cambios. Una vez configurado podrá
modificar cambios desde el menú Peripherals.
Puesta en marcha de la bomba MVE
Peripherals
Tras conectar el módulo desoldador neumático (MVE-A), entre en el menú de
Peripherals y seleccione el puerto con el que desee enlazar el módulo.
Cotton filtersFiltros de algodón Ref. 0781046
www.jbctools.com
350ºC
Port2
Power45%
Temp. Levels
T245
250 350 380
17:14
62 63
Port2
T245
17:14
350ºC
Port2
Power45%
T245
17:14
Selected 350ºC
SleepTool in the standActual Temp. 180ºCDelay to hibernation: 29:30
Port2
T245
17:14
HibernationActual Temp. 25ºC
Station Tools Counters
ResetGraphicsPeripherals
3. Hibernación
Funcionamiento
El exclusivo sistema calefactor de JBCNuestra tecnología revolucionaria es capaz de recuperar la temperatura de la punta de forma
extremadamente rápida. Esto significa que el usuario puede trabajar a una temperatura más baja
y mejorar la calidad de la soldadura. Esta temperatura se reduce aún más gracias a los modos de
Sleep e Hibernation que incrementan hasta 5 veces la vida de las puntas.
1. Trabajo 2. Sleep
Al levantar la herramienta
del soporte, la punta se
calienta hasta la temperatura
seleccionada.
Si la herramienta permenece
en el soporte, la temperatura
se reduce a la temperatura
predefinida.
Tras largos períodos de
inactividad (predefinido a
30min), se corta el suministro
de energía y la punta se enfría
hasta temperatura ambiente.
Menú Tools:
· Configure la temperatura
de Sleep
· Configure el tiempo de
retraso de Sleep
(de 0 a 9 min o ninguno)
· Configure el retraso de
Hibernación
(de 0 a 60 min o ninguno)
Menú Tools: Menú Tools:
Períodos largos en el soporte
· Configure límites de
temperatura.
· Seleccione niveles de
temperatura.
Unidad de memoria USB conectada.
Estación controlada por un PC.
Estación controlada por un robot.
Actualización del software de la estación. Pulse INFO para iniciar el proceso.
Aviso. Pulse INFO para la descripción del fallo.
Error. Pulse INFO para la descripción del fallo, el tipo de error y cómo proceder.
Notificaciones (Barra de estado)
Ayuda de la estación
Indicador de potencia
Herramienta en uso
Pantalla de trabajo
Barra de estado
La DDE-B presenta una interfaz de usuario intuitiva y ofrece un rápido acceso a los parámetros.
Cambio de puerto
Se muestra si los niveles de temperatura están activos
Pulse INFO para la descripción de parámetros.
Opciones de Menú
www.jbctools.com
Port 1 - T245
450
400
350
300
250
150
100
50
200
Power Temp
17:14
64 65
Graphics
Pulsando sobre Graphics en el menú principal, se muestran las respuestas de
temperatura y potencia en tiempo real de cada puerto. Esto le ayudará a decidir
cuál es la punta más adecuada para obtener la mejor calidad en sus soldaduras.
Análisis del proceso
Exporte gráficosInserte una unidad de memoria USB para
guardar su proceso de trabajo en formato csv.
Temperatura
Potencia (%)
Vea el gráfico del otro puerto
Red de soldadura
Gestione y monitorice tantas estaciones como soporte su PC.
Funciones:
- Configure todos los parámetros de la estación desde su PC.
- Organice grupos de estaciones y configure todos sus parámetros al mismo tiempo.
- Guarde configuraciones específicas para usos posteriores.
- Analice gráficos del proceso de soldadura de las estaciones desde su PC y expórtelos.
cualquier estación
JBC
JBC Manager software
USB Hub
1. Descargue el software JBC Manager y el manual de usuario de www.jbctools.com/manager.html
2. Conecte las estaciones a través del conector USB-B y el PC las detectará automáticamente.
3. La notificación se mostrará en la estación.
www.jbctools.com
66 67
Mantenga limpio
1. Conecte la herramienta a la estación utilizando el convertidor CHB-A (Ref: CHB-A).
2. Conecte su sistema robotizado al conector Robot de la estación (RJ12).
Si lo necesita, el adaptador DB9-RJ12 está disponible (Ref: 0013772).
3. Active la opción de robot en la estación y se mostrará la siguiente notificación:
4. Configure su sistema robotizado según el Protocolo de Comunicación para Robots,
que encontrará en www.jbctools.com/jbcsoftware-menu-115.html.
Gestione y monitorice la estación por medio de un sistema robotizado.
Trabajar con Robots
Unidad de Control
Robot
Actualice el software de la estación
1. Descargue el archivo de actualización de
www.jbctools. com/software.html
cuando esté disponible y guárdelo en una
unidad de memoria USB (preferentemente
una sin otros archivos).
JBCUpdate File
ConvertidorRef. CHB-A
Conexión RS-232
Mantenimiento
Antes de realizar tareas de mantenimiento o almacenar, desconecte el equipo y déjelo enfriar.
1. Tire del portafusible para retirar el fusible.
Si lo precisa, utilice una pequeña palanca.
2. Sustituya el fusible y coloque de nuevo el
portafusibles en su sitio.
- Use un paño húmedo para limpiar la
pantalla del equipo, la carcasa y la
herramienta. Puede utilizar alcohol
solamente en las partes metálicas.
- Compruebe periódicamente que las partes
metálicas de la herramienta y del soporte
están limpias. Así la estación puede
detectar el estado de la herramienta y
activar los modos de Sleep o Hibernation.
Portafusible
Portafusible
- Mantenga la punta limpia y estañada la
para evitar su oxidación. Las superfícies
sucias reducen la transferencia térmica a la
soldadura.
- Revise periódicamente los tubos y cables.
Fusible
2. Inserte la unidad de memoria USB.
La notificación se muestra mientras
se actualiza el software.
- Cambie el fusible fundido de la siguiente manera:
- Cambie cualquier pieza defectuosa o dañada. Utilice solamente recambios originales de JBC.
- Cualquier reparación sólo se podrá realizar por un servicio técnico oficial JBC.
www.jbctools.com
68 69
Seguridad
- No utilice el equipo para otros fines que no sea la soldadura o reparación. El uso incorrecto
puede causar fuego.
- El cable de red debe enchufarse en bases homologadas. Asegúrese de que está conectado a
tierra correctamente antes de su uso. Al retirarlo, tire del conector, no del cable.
- No trabaje con tensión.
- La herramienta debe permanecer en el soporte mientras no está en uso con el fin de activar el modo
de Sleep o Hibernación. El cartucho y las partes metálicas de la herramienta o del soporte pueden
estar calientes incluso cuando con la estación apagada. Manipule con cuidado, incluso cuando se
ajusta la posición del soporte.
- No deje el aparato desatendido cuando está en funcionamiento.
- No cubra las rejillas de ventilación. El calor puede causar que los productos inflamables se enciendan.
- Utilice flux clasificado como “non residue”. Evite el contacto con la piel y ojos para que no se irriten.
- Tenga cuidado con el humo producido al trabajar.
- Mantenga su lugar de trabajo limpio y ordenado. Use gafas y guantes de protección adecuados.
Así evitará cualquier daño.
- Tenga cuidado con los restos de estaño líquido. En contacto con la piel, puede causar quemaduras.
- Este aparato puede ser utilizado por personas a partir de 8 años y también por aquellas
personas con movilidad reducida o capacidades físicas, sensoriales o mentales limitadas o
con falta de experiencia y conocimientos siempre y cuando reciban supervisión o instrucciones
relativas al uso del aparato de una manera segura y entiendan los riesgos que implica. Los niños
no deben jugar con el aparato.
- Los niños no deberán realizar tareas de mantenimiento sin supervisión.
Es necesario cumplir estas normas de seguridad para prevenir cualquier
choque eléctrico, heridas, fuego o explosiones.
Complete Rework station with Pneumatic PumpEstación completa de reparación con bomba neumática RMVE-1C / RMVE-2C / RMVE-9C - Peso total: 15,8 kg (35 lb) - Temperatura de trabajo ambiente: 10-40ºC (50-104ºF) JTE-1D 120V 50/60Hz. Fusible de entrada: 8A JTE-2D 230V 50/60Hz. Fusible de entrada: 4A JTE-9D 100V 50/60Hz. Fusible de entrada: 8A - Peso: 5,7 kg (12.6 lb) - Dimensiones: 148 x 184 x 140 - Potencia nominal: 700W - Rango de temperatura: Temp. ambiente / 150-450°C (300-840ºF) Modo frío: T Off. Utilizado para emitir aire en temperatura ambiente. - Regulación del caudal de aire: 10-50 SLPM - Vacío: 30% / 228 mmHg / 9 inHg - Conexión USB estación-PC - Conector para pedal P-005
DDE-1B 120V 50/60Hz. Fusible de entrada: 4A. Salida: 23.5V DDE-2B 230V 50/60Hz. Fusible de entrada: 2A. Salida: 23.5V DDE-9B 100V 50/60Hz. Fusible de entrada: 5A. Salida: 23.5V - Peso: 4,3 Kg (9.4 lb) - Dimensiones: 148 x 120 x 232 mm - Potencia máxima de pico: 150W por herramienta - Rango de temperatura: 90-450°C (190-840 ºF) - Estabilidad de temperatura en reposo: ±1.5 ºC (±3 ºF) - Resistencia punta a tierra: <2 ohms - Tensión en punta: <2mV RMS - Conectores USB-A / USB-B / Peripherals (periféricos) - Conector RJ12 para Robot
MVE-A - Peso: 1 Kg (2.2 lb) - Dimensiones: 145 x 55 x 225 mm - Rango de suministro de presión de aire: 4-6 Bar - Vacío a 6 Bar: 90% / 680 mmHg / 26.8 inHg - Caudal de aire: 15 SLPM - Conector para pedal P-005
Cumple con las normativas CESeguridad ESD
Especificaciones
www.jbctools.com
70 71
Exploded View · Despiece
www.jbctools.com
0017
358-
0216
WarrantyJBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of their life must be collected and returned to an authorized recycling facility.
GarantíaEsta garantía de 2 años cubre este equipo contra cualquier defecto de fabricación, incluyendo la sustitución de partes defectuosas y mano de obra.La garantía no cubre el desgaste del producto por uso o mal uso. Para que esta garantía sea válida, el equipo debe ser devuelto, a portes pagados, al distribuidor donde se compró.
Este producto no debe desecharse en la basura. De acuerdo a la directiva europea 2012/19/UE, los equipos electrónicos al final de su vida se deberán recoger y trasladar a una planta de reciclaje autorizada.
www.jbctools.com