33m
m
108mm
TLPDXXX
Tradetec Prime Downlight
77mm - 92mm
77-92mm
Martec Pty Ltd6 Austool Pl | Ingleburn, NSW 2565 P: 02 8778 7500F: 02 8778 7555E: [email protected]
Thermal insulation clearance class-IC covered; meaning that thePrime LED down light can be covered entirely by insulationBuilding insulation abutting or is within 100mm horizontally of the luminaire must meet the following requirements: Be of atype that can maintain its dimensions and structural integritywhen exposed to a maximum surface temperature of the class ofthe luminaire, being 90⁰C; Be of a type that can withstand a 30second needle flame test carried out in accordance with AS/NZS60695.11.5 with a flame applied to all surfaces of the sampleInsulation types which should be used with this fitting are glasswool (Pink Batts) & polyester
The Prime down light can be dimmed to 10%.
Martec LED down lights are compatible and supported with the MartecMTD300VA dimmer.
All other dimmers may work, but are not supported by Martec.
