Product Data SheetJune 2015
SD 6703-2E04
TM
Damcos™ Hand Pump - Electro-hydraulic
Damcos™ Hand Pump - Electro-hydraulic June 2015
2
General DescriptionThe hand pump is always mounted with LPU or LPUM. HP-LPU can be mounted directly or as bulkhead mounted. HP-LPUM can be mounted directly on actuator only.
The handpump itself does not require any tank, but general tank requirements for LPU must be fulfilled.
Note!The very large actuators are not recommendable to be oper-ated by standard handpump - ask for directions.
Hand pump type Range
HP-LPU BRC/F/KF (Direct) BRC /F 125 - 8000 & KF 65 - 250
HP-LPU KC (Direct) KC 65 - 400
HP-LPUM BRC/F/KF (Direct) BRC/F 125 - 500
HP-LPUM KC (Direct) KC 65 - 125
HP-LPU BRC/F/KF (BB) BRC/F 125 - 8000 & KF 65 - 250
HP-LPU KC (BB) KC 65 - 400
Application
Direct and Bulkhead Mounted Handpump
Please note that oil volume must be taken into consideration to determine the correct VPI gear ratio.
Direct mounted hand pump. Bulkhead mounted hand pump.
Damcos™ Hand Pump - Electro-hydraulicJune 2015
3
Mounting Prepared for actuator and bulkhead block interface
Maximum operation pressure 135 bar
Test pressure 225 bar
Maximum hand pump pressure 135 bar
Weight without oil 4.3 kg BRC/F KF version5 kg KC version
Oil displacement per double stroke 8 cm3
Oil viscosity range From 15 to 200 cSt
Temperature range From -25o to 80o C
Recommended oil filtration ISO Solid contaminant code 18/15 or NAS 160/10
Main Data
Housing / Cover Brass
Spindle / Piston Brass
Valves Brass
Screws / Sign plate / Rivet Stainless steel
Sealings NBR (Acrylonitrile butadiene)
Material
Bulkhead Installation Requirement − To gain maximum hand pump performance it is of significant
importance that the pipes between hand pump and actuator are well de-aired.
− Distance between hand pump and actuator must not exceed 80 m.
− Bulkhead mounted hand pump can be with or without VPI. − Specific rules related to hand pump applications can be found
in related instructions.
Damcos™ Hand Pump - Electro-hydraulic June 2015
4
Hydraulic Diagram for Direct Mounted LPU Handpump
Hydraulic Diagram for Bulkhead Mounted LPU Handpump
Note!
Manually operated valves have the possibility of closing the connection to LPU. For LPU-S this will always be required for hand pump operation as open solenoid valve else would force actuator into fail safe position.
Note!
Manually operated valves have the possibility of closing the connection to LPU. For LPU-S this will always be required for hand pump operation as open solenoid valve else would force actuator into fail safe position.
Damcos™ Hand Pump - Electro-hydraulicJune 2015
5
Dimensions for Handpump
Approx 260 mm movement of handle
extra forKC-actuators70 extra for
non-KC-actuators50
Appro
x 316
-375
118
Additional weight: 4,2 kg for non-KC actuators, 5 kg for KC-actuators
HP-LPU shown on KC 125controlled by LPUM-D
HP-LPU shown on BRCF 500controlled by LPU-S
Product Data SheetAugust 2013
TM
Damcos™ Hand Pump - Electro-hydraulicSD 6703-2E04
Emerson Process ManagementDamcos A/S Aaderupvej 41 DK-4700 Naestved T +45 5578 7200 F +45 5578 7272
www.EmersonProcess.com/mtm
©2015 Emerson Process Management. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Damcos and the Damcos logotype are trademarks of Damcos A/S. All other marks are the property of their respective owners.
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. Standard Terms and Conditions of Sale can be issued by contacting Damcos A/S. We reserve the right to modify or improve the designs and specifications of our products at any time without notice. Damcos A/S accepts no responsibility for any errors that may appear in this publication.