Download - Product & Process Development and Design
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
1
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
– Implementation of LCA in Implementation of LCA in the early stages of product the early stages of product
developmentdevelopment.
G. Singh Bhander “Raja”Department of Manufacturing Engineering and
Management (IPL) Technical University of Denmark
Product & Process Development and DesignProduct & Process Development and Design
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
2
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Why do LCA? LCA provides a framework for identifying and evaluating
environmental burdens associated with the life cycles of materials and services in a "cradle-to-grave" approach.
LCA systematically identifies and evaluates opportunities for minimizing the overall environmental consequences of resource usage and environmental releases.
LCA thus helps bridge the gap between product development and environmental improvement.
Governments and society simply expect that companies pay attention to the environmental properties of all products and LCA and its utilization for product/process improvement is the way to meet this demand.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
3
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
LCA deficiencies Very time consuming and costly, does not support reduced
time to market. Generally too complex to implement in the product
development Requires input from environmental experts. No methods exist to reuse or update the assessment
parameters as the circumstances change. Provides a snapshot in time of complex system interactions
and therefore does not cater for the dynamic nature of product evolution in the design process.
Most techniques are first usable after the design is completed and do not support the life cycle evaluation throughout the design process.
Current environmental evaluation tools support the convergent learning style of scientists.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
4
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Research focus
Develop methodologies and strategies for implementation of LCA in the early stages of the product design (idea or conceptual design phase).
Analyse CAD-LCA integration approach and restrictions.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
5
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Eco-design process? Customer and Product Requirements definition. Product Functional requirements. Structural and material Requirements definition. General design stage. Detailed design stage.
Design Degreeof freedom
Knowledgeof design
Problem process function principle .. Details shape Implementation
Environmentalimprovement
High
TimeLower
Environmental solutions Design Characteristics
Customer and ProductRequirements definition
Product FunctionalRequirements
GeneralDesign
DetailedDesign
Structure andmaterialrequirements
Solutions
Deg
ree
of e
mbo
dim
ent
Eval
uate
Dia
gnos
e
The problem and customer requirements are translated into design specifications.
The EI curve shows that the conceptual design phase is very significant in comparison to other phases of the product development with respect to the optimisation of environmental performance.
The decision maker (usually the designer) needs to convert the design specifications into environmentally and legislative design specifications.
This stage of the design process describes the architecture of the product system to be designed, which is defined as the input/output interactions of the various devices required to perform the function
The detailed design stage (final stage), where the components' interactions are hierarchically related and detailed design information is performed.
The EI curve shows that the conceptual design phase is very significant in comparison to other phases of the product development with respect to the optimisation of environmental performance.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
6
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Design for the full Life Cycle
Life cycle design strategy: design for raw material
extraction and recycling; design for manufacture and
remanufacture; design for use and reuse; and design for end of life
Five improvement strategies: better material handling; chemical savings or
substitutions; thermal energy
economisation; electricity economisation; overhead reduction
Raw Material
ManufacturingStage
Use stage Reused
Remanufactured
Recycling
Earth
Waste Stream
Disposed
Des
ign
Proc
ess
Info
rmat
ion
Design Process life cycle InformationEnvironmental information
Product life cycle
Environmental evaluations in the design process
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
7
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Life Cycle Design strategies
Design strategies for raw materials extractions:
Minimise toxic chemical content;
Incorporate recycled and recyclable materials;
Use more durable materials; Reduce materials use; Design for sustainable resource
depletion (choose less scarce materials);
Reduce cost of material extraction;
Avoid toxic substances; Increase energy efficiency; Reduce waste streams; Increase re-use (in the form of
raw materials for another system (eco-system)) and recyclability of waste materials.
Raw Material
ManufacturingStage
Use stage Reused
Remanufactured
Recycling
Earth
Waste Stream
Disposed
Life Cycle Assessment Design strategies for manufacture:
Choose low impact substances and materials;
Minimise toxic chemical content; Incorporate recycled and recyclable
materials; Use more durable materials; Reduce the use of materials and
substances in the life time of the product system;
Design for sustainable resource depletion;
Apply a remanufacture, reuse and recycling strategy;
Choose less impact processes (eco-processes);
Increase process efficiency; Increase energy efficiency; Reduce waste streams.
Design strategies for use: Design for energy efficiency; Design for less emissions
and waste; Design for minimised
packaging; Design for functional life; Design for physical life; Design for functional
requirement not for decoration;
Design for increase dfunctional efficiency and accuracy;
Design for product’s less burden to sub-product.
Design strategies for Disposal: Re-use strategy: modular design; consider reduction of wear to components; protect from corrosion; easy to clean; minimum number of components, easy to disassemble; hazardous materials minimization and facilitation
of part or subassembly removal; serviceable. Re-manufacture strategy: serviceable; easy to disassemble; easy to clean; modular design; testable subassemblies; built with durable materials. Recycling strategy: made from recyclable materials; recycled content specified; material variety minimised; number of components minimised; material compatibility maximised; use of hazardous materials minimised; materials labelled for identification; designed for ease of disassembly.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
8
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Main issues for product development
Information must be accessible and useable and in a form which can be understood by all members of the design team;
Formal design methods, strategic frameworks and guidelines must be adapted from existing practices, in order to maximise the chances of success in implementation;
Product developers need help in identifying the environmental issues surrounding the products they are developing;
Product developers should be aware of the use and benefits of the broad range of eco-design tools and techniques now available, and have the confidence in choosing the most relevant tools for the job;
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
9
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
CAD – LCA integration
Design Process
CAD(B)
Environmental Impactpotentials improvement
Materials, ancillarysubstances improvements
Improvement with respect toGovernments requirements
InformationTransformation
(E)
Life Cycle CostingEvaluation
(F)Des
ign
Proc
ess
GPDAI Model(A)
- Impacts Profile - Most effected Material
profile - Most effected ancillary
substance and chemicalprofile
- Most effected processesprofile
- Improvement Profile(H)
Product Process Actual Cost
Evaluation(C)
Green Product Design and Innovation Evaluation Tool (GreenPAS)
HU
ser
Defi
ned
inpu
t
User definedDatabase
EPA Database
EDIP Database
PDM Database
H
Designer
user
Designer
Designer
group2
D
G
Database
Data Controlwindow
(New, modify, view in afile format, evaluate,
compare and print in afile format)
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
10
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
GreenPAS approach? GreenPAS PC tool will help product and
system developers to view quick and precise results of the product system. It will also show profiles and scores showing the environmental and cost performance of the chosen product, which will: alert the decision maker or product developer to
important choices made during development of the product or system.
guide the developer to reduce the environmental score derived from a product.
disclose the economic effects for the customer and company and help the company develop a more economic product or system.
help to enhance the LCA by improving deficiencies.
TECHNICAL UNIVERSITYOF DENMARK
G. Singh Bhander LCM2003 Conference
Seattle, USA22 – 25 September
11
DEPARTMENT OFMANUFACTURING ENGINEERING ANDMANAGEMENT
Conclusion Sustainable product design requires deeper analyses
in the early phase of the product design process than traditional industrial design, which is the focusing point in this presentation;
The introduction of LCA and industrial ecology forces the product designer to see the product in a wider perceptive;
A knowledge gap between the environmental scientist and the product designer can be filled through an interface between LCA and CAD systems;
An interface PC tool, integrated as early as possible in the design process, as well as being integrated throughout the design process could be of great help.