-
Model No. KX-NCP500KX-NCP1000
Pure IP-PBX
PT Programming Manual
Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-NCP500/KX-NCP1000: PBMPR Software File Version 2.0000 or later
-
IntroductionAbout this Programming Manual
The PT Programming Manual is designed to serve as a reference to programming the Panasonic Pure IP-PBXusing a Panasonic proprietary telephone (PT) with display.
The PT Programming Manual is divided into the following sections:
Section 1, OverviewProvides an overview of programming the PBX.
Section 2, PT ProgrammingServes as reference operating instructions when using a display PT to program the PBX.
Section 3, AppendixProvides a list of changes from the previous version of each model.
Feature Programming ReferencesProvides a list of all related PT programming items for each feature.
References Found in the PT Programming ManualPT Programming Manual ReferencesRelated sections of the PT Programming Manual are listed for your reference.
Feature Guide ReferencesThe Feature Guide explains what the PBX can do, as well as how to obtain the most of its many features andfacilities. Sections from the Feature Guide are listed throughout the PT Programming Manual for yourreference.
Links to Other Pages and ManualsIf you are viewing this manual with a PC, certain items are linked to different sections of the PT ProgrammingManual and other Pure IP-PBX manuals. Click on a link to jump to that section.Linked items include:• PT Programming Manual References• Feature Guide References
Safety NoticesPlease observe the safety notices in this manual in order to avoid danger to users or other people, and preventdamage to property.The notices are classified as follows, according to the severity of injury or damage:
WARNING This notice means that misuse could result in death or serious injury.
CAUTION This notice means that misuse could result in injury or damage toproperty.
2 PT Programming Manual
Introduction
-
WARNINGUnplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise.These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact anauthorised Panasonic Factory Service Centre.
NOTES• The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of
this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) SoftwareVersion Reference.
• Some optional service cards, PTs, and features are not available in some areas. Additionally, some optionalservice cards and features are not available for some PBX models. Please consult your certifiedPanasonic dealer for more information.
• Product specifications are subject to change without notice.• Throughout this manual, PT displays and other displays are shown in English. Other languages may be
available, depending on the country or area.• In this manual, the suffix of each model number (e.g., KX-NCP500NE) is omitted unless necessary.• For details about PT programming using the KX-NT400, refer to the Operating Instructions for the
KX-NT400.
The KX-NCP500UK/KX-NCP1000UK, KX-NCP500NE/KX-NCP1000NE, and KX-NCP500GR/
KX-NCP1000GR are designed to interwork with the:
• Analogue Public Switched Telephone Network (PSTN) of European countries
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access
• Pan-European Integrated Services Digital Network (ISDN) using ISDN primary rate access
• ONP 2048 kbit/s digital structured leased lines (D2048S)
Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd. declares that this
equipment is in compliance with the essential requirements and other relevant provisions of Radio &
Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available for
download by visiting:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
PT Programming Manual 3
Introduction
http://www.doc.panasonic.de
-
Table of Contents1 Overview ...................................................................................................91.1 Introduction .....................................................................................................................101.1.1 Introduction .....................................................................................................................101.1.2 Password Security ..........................................................................................................111.1.3 Entering Characters .......................................................................................................12
2 PT Programming ....................................................................................172.1 PT Programming .............................................................................................................182.1.1 Programming Instructions ..............................................................................................182.1.2 Maximum Values ............................................................................................................212.1.3 Basic Programming ........................................................................................................22
[000] Date & Time ........................................................................................................22[001] System Speed Dialling Number ..........................................................................22[002] System Speed Dialling Name .............................................................................22[003] Extension Number ..............................................................................................22[004] Extension Name .................................................................................................23[005] Extension Personal Identification Number (PIN) ................................................23[006] Operator Assignment ..........................................................................................23[007] DSS Console Paired Telephone .........................................................................23[008] Absent Message .................................................................................................24[010] Charge Margin ....................................................................................................24[011] Charge Tax .........................................................................................................24[012] Charge Rate per Unit ..........................................................................................24
2.1.4 System Management Programming ...............................................................................25[100] Flexible Numbering .............................................................................................25[101] Time Service Switching Mode ............................................................................25[102] Time Service Starting Time ................................................................................25[103] Idle Line Access (Local Access) .........................................................................26[110] System Password for Administrator—for PT Programming ...............................26[111] System Password for User—for PT Programming .............................................26[112] Manager Password .............................................................................................26[120] Verification Code ................................................................................................26[121] Verification Code Name ......................................................................................27[122] Verification Code Personal Identification Number (PIN) .....................................27[123] Verification Code COS Number ..........................................................................27[130] Decimal Point Position for Currency ...................................................................27[131] Currency .............................................................................................................27[190] Main Processing (MPR) Software Version Reference ........................................28
2.1.5 Timer Programming ........................................................................................................29[200] Hold Recall Time ................................................................................................29[201] Transfer Recall Time ..........................................................................................29[203] Intercept Time .....................................................................................................29[204] Hot Line Waiting Time ........................................................................................29[205] Automatic Redial Repeat Times .........................................................................29[206] Automatic Redial Interval ....................................................................................29[207] Door Unlock Time ...............................................................................................30[208] Call Duration Count Starting Time for LCOT ......................................................30[209] DISA Delayed Answer Time ...............................................................................30[210] DISA Trunk-to-Trunk Call Prolong Time .............................................................30[211] DISA Intercept Time ...........................................................................................30
2.1.6 TRS/Barring/ARS Programming .....................................................................................31[300] TRS/Barring Override by System Speed Dialling ...............................................31
4 PT Programming Manual
Table of Contents
-
[301] TRS/Barring Denied Code ..................................................................................31[302] TRS/Barring Exception Code .............................................................................31[303] Special Carrier Access Code ..............................................................................31[304] Emergency Number ............................................................................................31[320] ARS Mode ..........................................................................................................31[321] ARS Leading Number .........................................................................................32[322] ARS Routing Plan Table Number .......................................................................32[325] ARS Exception Number ......................................................................................32[330] ARS Routing Plan Time Table ............................................................................32[331–346] ARS Routing Plan Table (1–16) .................................................................33[350] ARS Carrier Name ..............................................................................................33[351] ARS Trunk Group for Carrier Access .................................................................33[352] ARS Removed Number of Digits for Carrier Access ..........................................33[353] ARS Carrier Access Code ..................................................................................33
2.1.7 Trunk Programming ........................................................................................................34[400] LCOT/BRI Trunk Connection ..............................................................................34[401] LCOT/BRI Trunk Name ......................................................................................34[402] LCOT/BRI Trunk Group Number ........................................................................34[409] LCOT/BRI Trunk Number Reference .................................................................34[410] LCOT Dialling Mode ...........................................................................................34[411] LCOT Pulse Rate ...............................................................................................34[412] LCOT DTMF Minimum Duration .........................................................................35[413] LCOT CPC Signal Detection Time—Outgoing ...................................................35[414] LCOT CPC Signal Detection Time—Incoming ...................................................35[415] LCOT Reverse Circuit ........................................................................................35[416] LCOT Pause Time ..............................................................................................35[417] LCOT Flash/Recall Time ....................................................................................35[418] LCOT Disconnect Time ......................................................................................36[420] BRI Network Type ..............................................................................................36[421] BRI DIL/DDI/MSN Selection ...............................................................................36[422] BRI Subscriber Number ......................................................................................36[424] BRI Layer 1 Active Mode ....................................................................................36[425] BRI Layer 2 Active Mode ....................................................................................36[426] BRI Configuration ...............................................................................................37[427] BRI TEI Mode .....................................................................................................37[450] DIL 1:1 Destination .............................................................................................37[451] DID Number ........................................................................................................37[452] DID Name ...........................................................................................................37[453] DID Destination ..................................................................................................38[471] Host PBX Access Code ......................................................................................38[472] Extension-to-Trunk Call Duration .......................................................................38[473] Trunk-to-Trunk Call Duration ..............................................................................38[475] DISA Silence Detection ......................................................................................38[476] DISA Continuous Signal Detection .....................................................................39[477] DISA Cyclic Signal Detection .............................................................................39[490] Caller ID Signal Type ..........................................................................................39[491] Pay Tone Signal Type ........................................................................................39
2.1.8 COS Programming .........................................................................................................40[500] Trunk Group Number ..........................................................................................40[501] TRS/Barring Level ..............................................................................................40[502] Trunk Call Duration Limitation ............................................................................40[503] Call Transfer to Trunk .........................................................................................40[504] Call Forwarding to Trunk ....................................................................................40[505] Executive Busy Override ....................................................................................41[506] Executive Busy Override Deny ...........................................................................41
PT Programming Manual 5
Table of Contents
-
[507] DND Override .....................................................................................................41[508] Account Code Mode ...........................................................................................41[509] TRS/Barring Level for System Speed Dialling ....................................................41[510] TRS/Barring Level for Extension Dial Lock ........................................................41[511] Manager Assignment ..........................................................................................41[512] Permission for Door Open Access .....................................................................42[514] Time Service Manual Switching .........................................................................42[515] Wireless XDP Parallel Mode for Paired Telephone ............................................42[516] Programming Mode Limitation ............................................................................42
2.1.9 Extension Programming .................................................................................................43[600] EXtra Device Port (XDP) Mode ..........................................................................43[601] Terminal Device Assignment ..............................................................................43[602] Class of Service ..................................................................................................43[603] Extension User Group ........................................................................................43[604] Extension Intercept Destination ..........................................................................43[605] Call Forwarding—No Answer Time ....................................................................44[606] CLIP/COLP Number ...........................................................................................44[620] Incoming Call Distribution Group Member ..........................................................44[621] Incoming Call Distribution Group Delayed Ringing ............................................44[622] Incoming Call Distribution Group Floating Extension Number ...........................44[623] Incoming Call Distribution Group Name .............................................................45[624] Incoming Call Distribution Group Distribution Method ........................................45[625] Destination for Overflow Time Expiration ...........................................................45[626] Overflow Time ....................................................................................................45[627] Destination When All Busy .................................................................................45[628] Queuing Call Capacity ........................................................................................46[629] Queuing Hurry-up Level .....................................................................................46[630] Queuing Time Table ...........................................................................................46[631] Sequences in Queuing Time Table ....................................................................46[632] Maximum Number of Agents ..............................................................................46[640] Extension User Groups of a Paging Group ........................................................47[641] External Pagers of a Paging Group ....................................................................47[650] Extension User Groups of a Pickup Group .........................................................47[660] VM Group Floating Extension Number ...............................................................47[680] Idle Extension Hunting Type ...............................................................................48[681] Idle Extension Hunting Group Member ..............................................................48[690] PS Registration ...................................................................................................48[691] PS Termination ...................................................................................................48[692] Personal Identification Number (PIN) for PS Registration ..................................49[699] CS Status Reference ..........................................................................................49
2.1.10 Resource/Interface Programming ..................................................................................50[700] External Pager Floating Extension Number .......................................................50[710] Music Source Selection for BGM ........................................................................50[711] Music on Hold .....................................................................................................50[712] Music for Transfer ...............................................................................................50[720] Doorphone Call Destination ................................................................................50[729] Doorphone Number Reference ..........................................................................50[730] Outgoing Message (OGM) Floating Extension Number .....................................51[731] Outgoing Message (OGM) Name .......................................................................51[732] DISA Security Mode ...........................................................................................51
2.1.11 SMDR & Maintenance Programming .............................................................................52[800] RS-232C Parameter—New Line Code ...............................................................52[800] RS-232C Parameter—Baud Rate ......................................................................52[800] RS-232C Parameter—Word Length ...................................................................52[800] RS-232C Parameter—Parity Bit .........................................................................52
6 PT Programming Manual
Table of Contents
-
[800] RS-232C Parameter—Stop Bit Length ...............................................................52[801] External Modem Control .....................................................................................52[802] SMDR Page Length ............................................................................................53[803] SMDR Skip Perforation ......................................................................................53[804] SMDR Outgoing Call Printing .............................................................................53[805] SMDR Incoming Call Printing .............................................................................53[810] Remote Programming ........................................................................................53[811] Modem Floating Extension Number ...................................................................53[812] ISDN Remote Floating Extension Number .........................................................53
2.1.12 Card Programming .........................................................................................................54[900] Slot Card Type Reference ..................................................................................54[901] Slot Card Deletion ..............................................................................................54[902] Slot Card Reset ..................................................................................................54[910] OPB3 Option Card Type Reference ...................................................................54[911] OPB3 Option Card Deletion ...............................................................................54
3 Appendix .................................................................................................553.1 Revision History ..............................................................................................................563.1.1 KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.0xxx .................................56
Feature Programming References .............................................................57
PT Programming Manual 7
Table of Contents
-
8 PT Programming Manual
Table of Contents
-
Section 1
Overview
This section provides an overview of programming thePBX.
PT Programming Manual 9
-
1.1 Introduction
1.1.1 IntroductionThese programming instructions are designed to serve as an overall system programming reference for thePanasonic Pure IP-PBX. Each feature in the PBX has default settings that can be changed to customise thePBX to your requirements. These settings control the functions of the PBX, and changing them is referred toas "system programming".Only one person can perform system programming at a time. Any other users trying to enter systemprogramming mode will be denied access.
Ways to ProgrammeThere are two programming methods:• PC (Personal Computer) Programming
All features and settings of the PBX can be programmed through PC programming with MaintenanceConsole. Installing and starting the Maintenance Console is described in the Installation Manual.
• PT (Proprietary Telephone) ProgrammingA subset of the features and settings of the PBX can be programmed using a PT. PT programming isdescribed in Section 2.1 PT Programming. An extension user can perform system programming byentering three-digit programming numbers with a PT.
10 PT Programming Manual
1.1.1 Introduction
-
1.1.2 Password SecurityTo maintain system security, system passwords are required to access certain programming functions of thePBX. By giving different users access to different passwords, it is possible to control the amount ofprogramming that each user is able to perform.The following types of system passwords are available:
Password Description Format
System Password (PT) forUser
Used to access user-level PT programming. The specific PTprogramming items that may be programmed at user levelcan be selected through system programming.
4–10 digits
System Password (PT) forAdministrator
Used to access administrator-level PT programming. All PTprogramming settings are available.
CAUTIONTo the Administrator or Installer regarding the system password1. Please provide all system passwords to the customer.2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known toothers.
3. The PBX has default passwords preset. For security, change these passwords the first time that youprogramme the PBX.
4. Change the passwords periodically.5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in systempasswords, refer to Section 1.1.3 Entering Characters.
PT Programming Manual 11
1.1.2 Password Security
-
1.1.3 Entering CharactersThe following characters can be used when storing a name, message, or other text entry data using a PT. Thetables below show you the characters available by pushing each button a specific number of times.
Table 1 (Standard mode)
Table 1 (Standard mode for RU model)
12 PT Programming Manual
1.1.3 Entering Characters
-
Table 2 (Option mode)
Table 2 (Option mode for CE model)
PT Programming Manual 13
1.1.3 Entering Characters
-
Table 2 (Option mode for GR model)
Table 2 (Option mode for RU model)
14 PT Programming Manual
1.1.3 Entering Characters
-
[Example of Entering Characters]To enter "Ann":
A n n
6 (5 times) 6 (5 times)2 ORFWD/DND
Note• To erase the character on the cursor, press CLEAR.• To move the cursor to the left, press .• To move the cursor to the right, press . When entering two or more characters that use the same
button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after enteringthe first character.
• If SELECT is pressed, the characters for each button will be displayed in reverse order.• To toggle between Table 1 and Table 2 when using the KX-NT300/KX-DT300/KX-T7600 series, press
the leftmost soft button.
PT Programming Manual 15
1.1.3 Entering Characters
-
16 PT Programming Manual
1.1.3 Entering Characters
-
Section 2
PT Programming
This section serves as reference operating instructionswhen using a display PT to program the PBX.
PT Programming Manual 17
-
2.1 PT Programming
2.1.1 Programming InstructionsRequired Telephone/Extension
PBX settings can be customised through system programming by using a proprietary telephone (PT) with amultiline display, such as the KX-NT343 or KX-NT346. To access system programming, the Class of Service(COS) assigned to the PT’s extension must be programmed to allow system programming, or the PT must beconnected to the lowest-numbered port on the card installed in the lowest-numbered slot.Only one system programming session can be performed at a time. This means that only one user can accesssystem programming at a time, whether through a PT or PC.For a list of characters that can be entered during system programming, see Section 1.1.3 EnteringCharacters.
Buttons and Functions
Fixed ButtonsFunction
KX-NT300/KX-DT300 KX-T7600 KX-T7200/KX-T7400/KX-T7500*1
REDIAL PREVIOUS
SP-PHONE NEXT
FWD/DND (Page up)
CONF (Page down)
AUTO DIAL
STORE
ENTER
— Back to Previous Menu(CANCEL)
SHIFT SHIFT SHIFT SHIFT
PAUSE PAUSE
PROGRAM PAUSE
PROGRAM
HOLD HOLD END
AUTO ANS
MUTE
MESSAGE
MUTE
AUTO ANSWER MESSAGE SELECT
18 PT Programming Manual
2.1.1 Programming Instructions
-
Fixed ButtonsFunction
KX-NT300/KX-DT300 KX-T7600 KX-T7200/KX-T7400/KX-T7500*1
FLASH/RECALL FLASH FLASH
TRANSFER
TRANSFER
CLEAR
INTERCOM
INTERCOMSECRET
*1 The buttons shown in this column are from the KX-T7400 series.
Entering System Programming ModeUsing a PT to perform system programming allows an authorised extension user to set a wide range of PBXfeatures and parameters.There are two levels of system programming that can be performed with a PT: administrator-level programmingand user-level programming.
Administrator Level:Allows the programming of all settings accessible through PT programming.
PROGRAM/ PAUSE
#
= 1234
System Password for AdministratorProgramming No.
3 digits —for PT Programming
User Level:Allows the programming of limited settings as permitted through PC programming.
= 1234
Programming No.
3 digits
System Password for User
—for PT ProgrammingPROGRAM/
PAUSE
Note means default value throughout this manual.
Programming StructureProgramming
Number Programming Group Title Description
[0XX] Basic Programming Frequently used programming steps
[1XX] System ManagementProgrammingGlobal system parameters
[2XX] Timer Programming System timers
PT Programming Manual 19
2.1.1 Programming Instructions
-
ProgrammingNumber Programming Group Title Description
[3XX] TRS/Barring/ARS Programming TRS/Barring and Automatic Route Selection (ARS)programming
[4XX] Trunk Programming Trunk, trunk group, and BRI line settings
[5XX] COS Programming Class of Service parameters
[6XX] Extension Programming Extension feature settings
[7XX] Resource/InterfaceProgrammingPBX interface and external device settings
[8XX] SMDR & MaintenanceProgrammingStation Message Detail Recording (SMDR) andmaintenance feature settings
[9XX]Card Programming Used to display the cards currently installed in the
PBX, or to delete a card from system programmingbefore physically removing it.
20 PT Programming Manual
2.1.1 Programming Instructions
-
2.1.2 Maximum ValuesThroughout this manual, maximum entry values are shown for each programming item, as shown in theexample below.
Disable/
Enable
SELECT[351] Carrier Table No. Trunk Group No.END
ENTER ENTER
SELECT
01–10 01–64
However, please note that slot and port entry values are not listed within each programming item. These valuesvary depending on the model of PBX and the card type installed, as shown below.
Available Slot Entry Values
PBX Model Free Slot Number Supported Cards
KX-NCP500 01–05All cards
KX-NCP1000 01–07
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Card Type Port Number Related Programming
BRI2 01–02 [400] [409] [42x] [450]
DHLC4 01–04
[600] [601]DLC8 01–08
DLC16 01–16
DPH2 11–32*1[72x]
DPH4 11–34*1
LCOT4 01–04 [400] [409] [41x] [450]
Enter values as two-digit numbers (e.g. "04" for port 4).*1 Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).
PT Programming Manual 21
2.1.2 Maximum Values
-
2.1.3 Basic Programming[000] Date & Time
[In 12-hour Format]
[000]00–99
Year
01–31
Date
01–12
Hour
00–59
Minute
END(HOLD)
ENTER ENTER
ENTER
01–12
Month
NEXTAM/PM
SELECT(AUTO ANS/MESSAGE)
[In 24-hour Format]
[000]00–99
Year
01–31
Date
00–23
Hour
00–59
Minute
END(HOLD)
ENTER ENTER
ENTER
01–12
Month
NEXT
[001] System Speed Dialling Number
[001]000–999
Speed Dialling No. Telephone No.
Max. 32 digits ENDENTER ENTER
CANCELNEXT
To the Next Speed Dialling No.
To the Desired Speed Dialling No.
[002] System Speed Dialling Name
[002] NameMax. 20 characters000-999 END
ENTER ENTER
Speed Dialling No.
[003] Extension Number
[003] New Extn. No.END
Current Extn. No.
ENTER ENTER1–5 digits 1–5 digits
22 PT Programming Manual
2.1.3 Basic Programming
-
NoteIf PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whoseextension number is to be programmed/modified, quit the application first.
[004] Extension Name
[004] NameMax. 20 characters END
Extn. No.
ENTER ENTER1–5 digits
[005] Extension Personal Identification Number (PIN)
[005]ENDMax. 10 digits
PIN
ENTER ENTER
Extn. No.
1–5 digits
CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.
[006] Operator Assignment
[006]END
Extn. No.
ENTER ENTER1 Day/2 Lunch/3 Break/4 Night
Time No.1–5 digits
[007] DSS Console Paired Telephone
[007]01–08
DSS Console No.END
ENTER ENTER
Extn. No.
1–5 digits
NoteThis programme is only available after the port connected to the DSS Console is assigned as "DSSConsole" in [601] Terminal Device Assignment.Note that if one or more SDN buttons have been set at the DSS Console, they must be deleted before thissetting can be changed.
PT Programming Manual 23
2.1.3 Basic Programming
-
[008] Absent Message
[008]1–8
Location No.END
Message
ENTER ENTERMax. 16 characters
[010] Charge Margin
[010]2+2 decimal places
Margin XX.YY%END
ENTER ENTER
[011] Charge Tax
[011]01–03
Location No.2+2 decimal places
Tax XX.YY%END
ENTER ENTER
[012] Charge Rate per Unit
[012]01–64
Trunk Group No.
Max. 8 digits including decimal point
Charge RateEND
ENTER ENTER
24 PT Programming Manual
2.1.3 Basic Programming
-
2.1.4 System Management Programming[100] Flexible Numbering
[100]01–68
Location No. Feature No.END
(HOLD)ENTER ENTER
CANCELNEXT
To the Next Location No.
To the Desired Location No.
1–4 digits
[101] Time Service Switching Mode
[101]
Manual/AutomaticEND
SELECT(AUTO ANS/MESSAGE)
ENTER ENTER
[102] Time Service Starting Time[In 12-hour Format]
[102]
01:00–12:59
Hour:MinuteEND
ENTER
ENTER
Day No. Time No.0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat
1 Day-1/2 Lunch/3 Day-2/4 Night
Page up
NEXT
To the Next Time No.
To the Next Day No.
AM/PM
SELECT
PT Programming Manual 25
2.1.4 System Management Programming
-
[In 24-hour Format]
[102]00:00–23:59
Hour:MinuteEND
ENTER ENTER
Day No. Time No.0 Sun/1 Mon/2 Tue/3 Wed/4 Thu/5 Fri/6 Sat
1 Day-1/2 Lunch/3 Day-2/4 Night
Page upNEXT
To the Next Time No.
To the Next Day No.
[103] Idle Line Access (Local Access)
[103] Location No. Trunk Group No.END
ENTER ENTER01–6401–64
[110] System Password for Administrator—for PT Programming
[110]4–10 digits
PasswordEND
ENTER ENTER1234
[111] System Password for User—for PT Programming
[111]4–10 digits
PasswordEND
ENTER ENTER1234
[112] Manager Password
[112]4–10 digits
PasswordEND
ENTER ENTER1234
[120] Verification Code
[120]0001–1000
Location No.1–4 digits
Verification CodeEND
ENTER ENTER
26 PT Programming Manual
2.1.4 System Management Programming
-
[121] Verification Code Name
[121]0001–1000
Location No.Max. 20 characters
NameEND
ENTER ENTER
[122] Verification Code Personal Identification Number (PIN)
[122]0001–1000
Location No.Max. 10 digits
PINEND
ENTER ENTER
CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.
[123] Verification Code COS Number
[123]0001–1000
Location No.01–64
COS No.END
ENTER ENTER
[130] Decimal Point Position for Currency
[130]0–6
Desired No.END
ENTER ENTER
[131] Currency
[131]3 characters
CurrencyEND
ENTER ENTER
PT Programming Manual 27
2.1.4 System Management Programming
-
[190] Main Processing (MPR) Software Version Reference
[190]Reference only
MPR VersionEND
ENTER
28 PT Programming Manual
2.1.4 System Management Programming
-
2.1.5 Timer Programming[200] Hold Recall Time
[200]0–240 s
TimeEND
(HOLD)ENTER ENTER
[201] Transfer Recall Time
[201]END
ENTER ENTER1–240 s
Time
[203] Intercept Time
[203]END
ENTER ENTER1–240 s
Time1 Day/2 Lunch3 Break/4 Night
Time No.Time No.
[204] Hot Line Waiting Time
[204]0–15 s
TimeEND
ENTER ENTER
[205] Automatic Redial Repeat Times
[205]0–10
Number of TimesEND
ENTER ENTER
[206] Automatic Redial Interval
[206](1–120) ×10 s
Time
ENDENTER ENTER
PT Programming Manual 29
2.1.5 Timer Programming
-
[207] Door Unlock Time
[207]2–7 s
TimeEND
ENTER ENTER
[208] Call Duration Count Starting Time for LCOT
[208]0–60 s
TimeEND
ENTER ENTER
[209] DISA Delayed Answer Time
[209]0–30 s
TimeEND
ENTER ENTER
[210] DISA Trunk-to-Trunk Call Prolong Time
[210]0–7 min
TimeEND
ENTER ENTER
[211] DISA Intercept Time
[211]0–60 s
TimeEND
ENTER ENTER1 Day/2 Lunch3 Break/4 Night
Time No.
30 PT Programming Manual
2.1.5 Timer Programming
-
2.1.6 TRS/Barring/ARS Programming[300] TRS/Barring Override by System Speed Dialling
[300]Disable/Enable
END(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER ENTER
[301] TRS/Barring Denied Code
ENTER ENTER
[301]2–6
Level No.Max. 16 digits
Denied Code001–100
Location No.END
CANCELNEXT
To the Next Location No.
To the Desired Location No.
[302] TRS/Barring Exception Code
[302]2–6
Level No.Max. 16 digits
Exception Code
001–100
Location No.END
ENTER ENTER
[303] Special Carrier Access Code
[303]Max. 16 digits
Carrier Access Code
01–20
Location No.END
ENTER ENTER
[304] Emergency Number
[304]Max. 32 digits
Emergency No.
01–10
Location No.END
ENTER ENTER
[320] ARS Mode
[320] Off/Idle Line/
All Access
END
SELECT
ENTER ENTER
PT Programming Manual 31
2.1.6 TRS/Barring/ARS Programming
-
[321] ARS Leading Number
[321]0001–1000
Location No.
Max. 16 digits
Leading No.END
ENTER ENTER
[322] ARS Routing Plan Table Number
[322]0001–1000
Location No.
01–16
Plan Table No.END
ENTER ENTER
[325] ARS Exception Number
[325]001–200
Location No.
Max. 16 digits
Exception No.END
ENTER ENTER
[330] ARS Routing Plan Time Table[In 12-hour Format]
01–16
Plan Table No.
01–12/00–59
Hour:Minute
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
Day No.
END
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
ARS Time No.
ENTER
ENTER
[330]
AM/PM
SELECT
[In 24-hour Format]
Plan Table No.
00–23/00–59
Hour:Minute
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
Day No.
END
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
ARS Time No.
ENTER
ENTER
[330]01–16
32 PT Programming Manual
2.1.6 TRS/Barring/ARS Programming
-
[331–346] ARS Routing Plan Table (1–16)
[331–346] Day No.
01–10/None
Carrier Table No.
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
ARS Time No.
END
1–6
Priority
ENTER
ENTER
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
[350] ARS Carrier Name
[350]01–10
Carrier Table No.
Max. 20 characters
NameEND
ENTER ENTER
[351] ARS Trunk Group for Carrier Access
SELECT[351] Carrier Table No. Trunk Group No.
END
ENTER ENTER
SELECT
01–10 01–64 Disable/
Enable
[352] ARS Removed Number of Digits for Carrier Access
[352] Carrier Table No.0–15
Digits to RemoveEND
ENTER ENTER
01–10
[353] ARS Carrier Access Code
[353] Carrier Table No.Max. 32 digits
Carrier Access CodeEND
ENTER ENTER01–10
PT Programming Manual 33
2.1.6 TRS/Barring/ARS Programming
-
2.1.7 Trunk Programming[400] LCOT/BRI Trunk Connection
ENTER ENTER
[400]No Connect/ Connect
END(HOLD)
SELECT(AUTO ANS/MESSAGE)
CANCELNEXT
To the Next Port No.To the Desired Port No.
Slot No. Port No.
[401] LCOT/BRI Trunk Name
[401]Max. 20 characters
NameEND
ENTER ENTER3 digits
Trunk No.
[402] LCOT/BRI Trunk Group Number
[402]01–643 digits
Trunk Group No.
END
ENTERENTER
Trunk No.
[409] LCOT/BRI Trunk Number Reference
[409]Reference only
Slot No. Port No. Trunk No.END
ENTER
[410] LCOT Dialling Mode
[410]DTMF/Pulse
ENDSELECT
ENTER ENTER
Slot No. Port No.
[411] LCOT Pulse Rate
[411]Low/High ENDSELECT
ENTER ENTER
Slot No. Port No.
34 PT Programming Manual
2.1.7 Trunk Programming
-
[412] LCOT DTMF Minimum Duration
[412]80/160 ms ENDSELECT
ENTER ENTER
Slot No. Port No.
[413] LCOT CPC Signal Detection Time—Outgoing
[413]0: None/1: 6.5/2–113: (N–1)×8 ms
ENDENTER ENTER
Slot No. Port No. Mode No.
[414] LCOT CPC Signal Detection Time—Incoming
[414]END
ENTER ENTER0: None/1: 6.5/2–113: (N–1)×8 ms
Slot No. Port No. Mode No.
[415] LCOT Reverse Circuit
[415] Disable/ Outgoing/Both Call
ENDSELECT
ENTER ENTER
Slot No. Port No.
[416] LCOT Pause Time
[416] 1.5/2.5/
3.5/4.5 s
ENDSELECT
ENTER ENTER
Slot No. Port No.
[417] LCOT Flash/Recall Time
[417]None/80/96/112/300/600/900/1200 ms/option
ENDSELECT
ENTER ENTER
Slot No. Port No.
PT Programming Manual 35
2.1.7 Trunk Programming
-
[418] LCOT Disconnect Time
[418]0.5/1.5/2.0/
4.0/12.0 s
ENDSELECT
ENTER ENTER
Slot No. Port No.
[420] BRI Network Type
ENTER ENTER
[420] Slot No. Port No.00–56
Network TypeEND
[421] BRI DIL/DDI/MSN Selection
[421] Slot No. Port No.DIL/DDI/MSN
ENDSELECT
ENTER ENTER
[422] BRI Subscriber Number
[422] Slot No. Port No.Max. 16 digits
Subscriber No.END
ENTER ENTER
[424] BRI Layer 1 Active Mode
[424] Slot No. Port No. Permanent/ Call by call
ENDSELECT
ENTER ENTER
NoteAfter changing this setting, perform [902] Slot Card Reset to enable the new setting.
[425] BRI Layer 2 Active Mode
[425] Slot No. Port No. Permanent/ Call by call
ENDSELECT
ENTER ENTER
NoteAfter changing this setting, perform [902] Slot Card Reset to enable the new setting.
36 PT Programming Manual
2.1.7 Trunk Programming
-
[426] BRI Configuration
[426] Slot No. Port No.P-P/P-MP
ENDSELECT
ENTER ENTER
NoteAfter changing this setting, perform [902] Slot Card Reset to enable the new setting.
[427] BRI TEI Mode
ENTERENTER
[427] Slot No. Port No.00–63 (for Fix)/
TEIEND
ENTERClear (for Automatic)
NoteAfter changing this setting, perform [902] Slot Card Reset to enable the new setting.
[450] DIL 1:1 Destination
[450]
END
ENTER
ENTER
Time No. Slot No. Port No. Destination No.1 Day/2 Lunch/3 Break/4 Night
1–5 digits
[451] DID Number
[451]0001–1000
Location No.Max. 32 digits
DID No.END
ENTER ENTER
[452] DID Name
[452]0001–1000
Location No.Max. 20 characters
NameEND
ENTER ENTER
PT Programming Manual 37
2.1.7 Trunk Programming
-
[453] DID Destination
[453]0001–1000
Location No. Destination No.END
ENTER ENTER
1 Day/2 Lunch/3 Break/4 Night
Time No.1–5 digits
[471] Host PBX Access Code
[471] Trunk Group No.01–10
Location No.
Max.10 digits
Host PBX Access CodeEND
ENTER
ENTER
01–64
[472] Extension-to-Trunk Call Duration
[472] Trunk Group No.01–60 min
TimeEND
ENTER ENTER01–64
[473] Trunk-to-Trunk Call Duration
[473] Trunk Group No.01–60 min
TimeEND
ENTER ENTER01–64
[475] DISA Silence Detection
ENTER ENTER
[475] Trunk Group No.
No Detect/
Detect
ENDSELECT
01–64
38 PT Programming Manual
2.1.7 Trunk Programming
-
[476] DISA Continuous Signal Detection
[476] Trunk Group No.No Detect/
Detect
ENDSELECT
ENTER ENTER01–64
[477] DISA Cyclic Signal Detection
[477] Trunk Group No.No Detect/
Detect
ENDSELECT
ENTER ENTER01–64
[490] Caller ID Signal Type
ENTER ENTER
[490] Slot No. FSK/FSK with
Visual Caller ID/DTMF
SELECTEND
[491] Pay Tone Signal Type
[491] Slot No.12/16 kHz
SELECTEND
ENTER ENTER
PT Programming Manual 39
2.1.7 Trunk Programming
-
2.1.8 COS Programming[500] Trunk Group Number
[500]1 Day/2 Lunch/3 Break/4 Night
01–64
COS No.Time No.
Trunk Group No.
Disable/EnableEND
(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER
ENTER
NEXT
To the Next
Trunk Group
No.
To the Next
COS No.
Page up
01–64
[501] TRS/Barring Level
[501]01–64
COS No.Time No.1–7
LevelEND
ENTER ENTER1 Day/2 Lunch/3 Break/4 Night
[502] Trunk Call Duration Limitation
[502]01–64
COS No.END
ENTER ENTER
SELECT
Disable/
Enable
[503] Call Transfer to Trunk
[503]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[504] Call Forwarding to Trunk
Disable/
Enable
SELECT[504]
01–64
COS No.END
ENTER ENTER
40 PT Programming Manual
2.1.8 COS Programming
-
[505] Executive Busy Override
SELECT
Disable/
Enable
[505]01–64
COS No.END
ENTER ENTER
[506] Executive Busy Override Deny
Disable/
Enable
SELECT
ENTER ENTER
[506]01–64
COS No.END
[507] DND Override
SELECT
Disable/
Enable
[507]01–64
COS No.END
ENTER ENTER
[508] Account Code Mode
[508]01–64
COS No.END Option/
Forced
SELECT
ENTER ENTER
[509] TRS/Barring Level for System Speed Dialling
[509]01–64
COS No.1–7
TRS/Barring LevelEND
ENTER ENTER
[510] TRS/Barring Level for Extension Dial Lock
[510]01–64
COS No.1–7 END
ENTER ENTER
TRS/Barring Level
[511] Manager Assignment
[511]01–64
COS No.END Disable/Enable
SELECT
ENTER ENTER
PT Programming Manual 41
2.1.8 COS Programming
-
[512] Permission for Door Open Access
Disable/
Enable
SELECT[512]01–64
COS No.END
ENTER ENTER
[514] Time Service Manual Switching
[514]01–64
COS No.END Disable/
Enable
SELECT
ENTER ENTER
[515] Wireless XDP Parallel Mode for Paired Telephone
SELECT
Disable/
Enable
[515]01–64
COS No.END
ENTER ENTER
[516] Programming Mode Limitation
[516]01–64
COS No.END Disable/Personal/
System&Personal
SELECT
ENTER ENTER
42 PT Programming Manual
2.1.8 COS Programming
-
2.1.9 Extension Programming[600] EXtra Device Port (XDP) Mode
[600] Slot No. Port No.
Off/OnEND
(HOLD)
SELECT(AUTO ANS/MESSAGE)
ENTER ENTER
CANCELNEXT
To the Next Port No.
To the Desired Port No.
[601] Terminal Device Assignment
[601] Slot No. Port No.Telephone/DSS Console 01–08/Voice Mail 1–(01–12)/Voice Mail 2–(01–12)/PC Console 1–8
ENDSELECT
ENTER ENTER
NoteWhen changing the type of a port for which one or more SDN buttons are set (except when changingbetween PC Console and Telephone), all SDN buttons customised for that device will be deleted.
[602] Class of Service
[602]01–64
COS No.END
ENTER ENTER
Extn. No.
1–5 digits
[603] Extension User Group
[603] Extn. User Group No.END
ENTER ENTER
Extn. No.
001–0321–5 digits
[604] Extension Intercept Destination
[604]Max. 32 digits
Destination No.1 Day/2 Lunch/3 Break/4 Night
ENDENTER ENTER
Time No. Extn. No.1–5 digits
PT Programming Manual 43
2.1.9 Extension Programming
-
[605] Call Forwarding—No Answer Time
[605]0–120 s
TimeEND
ENTER ENTER
Extn. No.1–5 digits
[606] CLIP/COLP Number
[606]Max. 16 digits
CLIP/COLP No.END
ENTER ENTER
Extn. No.1–5 digits
[620] Incoming Call Distribution Group Member
[620] Location No.Incoming Call
Distribution
Group No.
END
ENTER
ENTER
Extn. No.
001–128
01–32 1–5 digits
[621] Incoming Call Distribution Group Delayed Ringing
[621] Location No.
END
Immediate/ 1–6 (rings)/ No ring
SELECT
ENTER
ENTER
Incoming Call
Distribution
Group No.
001–128
01–32
[622] Incoming Call Distribution Group Floating Extension Number
[622]END
ENTER ENTER
Extn. No.Incoming Call
Distribution
Group No.001–128
1–5 digits
44 PT Programming Manual
2.1.9 Extension Programming
-
[623] Incoming Call Distribution Group Name
[623]Max. 20 characters
NameEND
ENTER ENTER
Incoming Call
Distribution
Group No.
001–128
[624] Incoming Call Distribution Group Distribution Method
[624]END Ring/UCD/
Priority Hunt
SELECT
ENTER ENTER
Incoming Call
Distribution
Group No.001–128
[625] Destination for Overflow Time Expiration
[625]1 Day/2 Lunch/3 Break/4 Night
Max. 32 digits
Destination No.
END
ENTER
ENTER
Time No.Incoming Call
Distribution
Group No.001–128
[626] Overflow Time
[626](1–125)×10 s
001-128
Overflow TimeEND
ENTER ENTER
Incoming Call
Distribution
Group No.
[627] Destination When All Busy
[627]Max. 32 digits
Destination No.
END
ENTER
ENTER
Incoming Call
Distribution
Group No.1 Day/2 Lunch/3 Break/4 Night
Time No.
001–128
PT Programming Manual 45
2.1.9 Extension Programming
-
[628] Queuing Call Capacity
[628]0–30
Number in QueuingEND
ENTER ENTER
Incoming Call
Distribution
Group No.001–128
[629] Queuing Hurry-up Level
[629]None/1–30
Hurry-up LevelEND
ENTER ENTER
Incoming Call
Distribution
Group No.001–128
[630] Queuing Time Table
[630]1 Day/2 Lunch/3 Break/4 Night
Table No.Time No.
END
ENTER
ENTER
Incoming Call
Distribution
Group No.
001–128
01–64
[631] Sequences in Queuing Time Table
[631]01–16
* Number must be entered in the "N".
Location No.Table No.
END
None/Overflow/Disconnect/"N" × 5 s/Sequence "N"/OGM "N"
SELECT
ENTER
ENTER
01–64
[632] Maximum Number of Agents
[632]No Limitation/01–32
Number of AgentsEND
ENTER ENTER
Incoming Call
Distribution
Group No.
001–128
46 PT Programming Manual
2.1.9 Extension Programming
-
[640] Extension User Groups of a Paging Group
[640] Extn. User Group No.Paging Group No.
END
No/Yes
SELECT
ENTER
ENTER
01–32 001–032
[641] External Pagers of a Paging Group
[641] External Pager No.Paging Group No.
END
SELECT
ENTER
ENTER
No/Yes01–32 1
[650] Extension User Groups of a Pickup Group
[650] Pickup Group No.
END
SELECT
ENTER
ENTER
No/Yes
Extn. User Group No.
01–64 001–032
[660] VM Group Floating Extension Number
[660]1–2
VM (DPT) Group No.END
ENTER ENTER
Extn. No.
1–5 digits
PT Programming Manual 47
2.1.9 Extension Programming
-
[680] Idle Extension Hunting Type
[680] Hunting Group No.END
Circular/
Terminate
SELECT
ENTER ENTER01–64
[681] Idle Extension Hunting Group Member
[681]01–16
Location No.Hunting Group No.
END
ENTER
ENTER
Extn. No.
01–64
1–5 digits
[690] PS Registration
[690] PS No.
KX-TD7690
END
ENTER ENTER
To the PSoperationbelow
Extn. No.
Push power button for 2 seconds.
Push F3 key for 2 seconds.
C.Tone
001–064 1–5 digits
NoteFor details about PS registration, refer to the Quick Installation Guide for the relevant Cell Station (CS).
[691] PS Termination
[691] PS No.END
ENTER ENTER001–064
48 PT Programming Manual
2.1.9 Extension Programming
-
[692] Personal Identification Number (PIN) for PS Registration
[692]4 digits
PIN for PS Registration END
ENTER ENTER1234
[699] CS Status Reference
[699]END
Slot No.Reference only
CS Status
ENTER
Port No.
PT Programming Manual 49
2.1.9 Extension Programming
-
2.1.10 Resource/Interface Programming[700] External Pager Floating Extension Number
[700]1
Pager No.END
(HOLD)ENTER ENTER
Extn. No.1–5 digits
[710] Music Source Selection for BGM
[710]END
External/Internal1/ Internal2
ENTER ENTER
SELECT(AUTO ANS/MESSAGE)
[711] Music on Hold
[711]ENDTone/BGM1–7
Music Source No.
ENTER ENTER
[712] Music for Transfer
[712]END Hold Music/
Ring back
SELECT
ENTER ENTER
[720] Doorphone Call Destination
[720]
END
1 Day/2 Lunch/3 Break/4 Night
Max. 32 digits
Slot No.1–3 1–4
Card No. and Port No.Time No.
Destination No.
ENTER
ENTER
[729] Doorphone Number Reference
[729]END
Slot No.1–3 1–4 Reference only
Doorphone No.
ENTER
Card No. and Port No.
50 PT Programming Manual
2.1.10 Resource/Interface Programming
-
[730] Outgoing Message (OGM) Floating Extension Number
[730]END
Message No.
ENTER ENTER
Extn. No.
01–64 1–5 digits
[731] Outgoing Message (OGM) Name
[731]END
Message No.Max. 20 characters
Name
ENTER ENTER01–64
[732] DISA Security Mode
[732]END None/
Trunk/All
SELECT
ENTER ENTER
PT Programming Manual 51
2.1.10 Resource/Interface Programming
-
2.1.11 SMDR & Maintenance Programming[800] RS-232C Parameter—New Line Code
[800]END
(HOLD)CR+LF/CR
SELECT(AUTO ANS/MESSAGE)
1
Location
ENTER ENTER
[800] RS-232C Parameter—Baud Rate
[800]END2400/4800/9600/
19200/38400/57600/115200 bps
2
Location
ENTER ENTER
SELECT
[800] RS-232C Parameter—Word Length
[800]END
7/8 bits
SELECT
3
Location
ENTER ENTER
[800] RS-232C Parameter—Parity Bit
[800]ENDNone/Mark/
Space/Even/Odd
SELECT
4
Location
ENTER ENTER
[800] RS-232C Parameter—Stop Bit Length
[800]END1 bit/2 bits
SELECT
5
Location
ENTER ENTER
[801] External Modem Control
[801]END
ENTER ENTER
Command No.1–5
52 PT Programming Manual
2.1.11 SMDR & Maintenance Programming
-
[802] SMDR Page Length
[802]END
4–99 lines
Page length
ENTER ENTER
[803] SMDR Skip Perforation
[803]END0–95 lines
Skip Perforation
ENTER ENTER
[804] SMDR Outgoing Call Printing
[804]ENDNo print/Print
SELECT
ENTER ENTER
[805] SMDR Incoming Call Printing
[805]ENDNo print/Print
SELECT
ENTER ENTER
[810] Remote Programming
Disable/
Enable
SELECT[810]END
ENTER ENTER
[811] Modem Floating Extension Number
[811]END
ENTER ENTER
Extn. No.1–5 digits
[812] ISDN Remote Floating Extension Number
[812]END
ENTER ENTER
Extn. No.1–5 digits
PT Programming Manual 53
2.1.11 SMDR & Maintenance Programming
-
2.1.12 Card Programming[900] Slot Card Type Reference
[900]Reference only
Slot No. Card NameEND
(HOLD)ENTER
[901] Slot Card Deletion
[901]END
ENTER
Slot No. Delete
ENTER
To the Next Slot No.To the Desired Slot No.
CANCELNEXT
Confirming the deleting operation.
[902] Slot Card Reset
[902]END
Slot No. Reset
ENTER ENTERConfirming the resetting operation.
[910] OPB3 Option Card Type Reference
[910]END
Slot No.
Reference only
Option Card Type
ENTER 1–3
Card No.
[911] OPB3 Option Card Deletion
[911]END
Slot No.1–3
Card No. Delete
ENTER ENTERConfirming the deleting operation.
54 PT Programming Manual
2.1.12 Card Programming
-
Section 3
Appendix
PT Programming Manual 55
-
3.1 Revision History
3.1.1 KX-NCP500/KX-NCP1000 PBMPR Software File Version2.0xxxChanged Contents
• 2.1.9 Extension Programming[690] PS Registration
• 2.1.10 Resource/Interface Programming[711] Music on Hold
56 PT Programming Manual
3.1.1 KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.0xxx
-
Feature Programming References
PT Programming Manual 57
-
Absent Message• [008] Absent Message
Feature Guide References1.19.2 Absent Message
Account Code Entry• [508] Account Code Mode
Feature Guide References1.5.4.3 Account Code Entry
Automatic Route Selection (ARS)• [320] ARS Mode• [321] ARS Leading Number• [322] ARS Routing Plan Table Number• [325] ARS Exception Number• [330] ARS Routing Plan Time Table• [331–346] ARS Routing Plan Table (1–16)• [350] ARS Carrier Name• [351] ARS Trunk Group for Carrier Access• [352] ARS Removed Number of Digits for Carrier Access• [353] ARS Carrier Access Code
Feature Guide References1.10.1 Automatic Route Selection (ARS)
Call Charge Services• [010] Charge Margin• [011] Charge Tax• [012] Charge Rate per Unit• [130] Decimal Point Position for Currency• [131] Currency• [491] Pay Tone Signal Type
Feature Guide References1.26.3 Call Charge Services
Call Forwarding (FWD)• [472] Extension-to-Trunk Call Duration• [473] Trunk-to-Trunk Call Duration• [504] Call Forwarding to Trunk• [605] Call Forwarding—No Answer Time
Feature Guide References1.3.1.2 Call Forwarding (FWD)
Call Hold• [200] Hold Recall Time
58 PT Programming Manual
Feature Programming References
-
Feature Guide References1.13.1 Call Hold
Call Pickup• [650] Extension User Groups of a Pickup Group
Feature Guide References1.4.1.3 Call Pickup
Call Transfer• [201] Transfer Recall Time• [503] Call Transfer to Trunk• [712] Music for Transfer
Feature Guide References1.12.1 Call Transfer
Caller ID• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [490] Caller ID Signal Type
Feature Guide References1.18.1 Caller ID
Calling Line Identification (CLI) Distribution• [001] System Speed Dialling Number• [002] System Speed Dialling Name
Feature Guide References1.1.1.5 Calling Line Identification (CLI) Distribution
Calling Party Control (CPC) Signal Detection• [413] LCOT CPC Signal Detection Time—Outgoing• [414] LCOT CPC Signal Detection Time—Incoming
Feature Guide References1.11.10 Calling Party Control (CPC) Signal Detection
Calling/Connected Line Identification Presentation (CLIP/COLP)• [003] Extension Number• [422] BRI Subscriber Number• [606] CLIP/COLP Number
Feature Guide References1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected NameIdentification Presentation (CNIP/CONP)—by QSIG
• [003] Extension Number
PT Programming Manual 59
Feature Programming References
-
• [004] Extension Name
Feature Guide References1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected NameIdentification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)• 2.1.8 COS Programming• [602] Class of Service
Feature Guide References2.2.1 Class of Service (COS)
Dial Type Selection• [410] LCOT Dialling Mode• [411] LCOT Pulse Rate• [412] LCOT DTMF Minimum Duration
Feature Guide References1.5.4.4 Dial Type Selection
Direct In Line (DIL)• [421] BRI DIL/DDI/MSN Selection• [450] DIL 1:1 Destination
Feature Guide References1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)• [421] BRI DIL/DDI/MSN Selection• [451] DID Number• [452] DID Name• [453] DID Destination
Feature Guide References1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)• [209] DISA Delayed Answer Time• [210] DISA Trunk-to-Trunk Call Prolong Time• [211] DISA Intercept Time• [475] DISA Silence Detection• [476] DISA Continuous Signal Detection• [477] DISA Cyclic Signal Detection• [604] Extension Intercept Destination• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [732] DISA Security Mode
Feature Guide References
60 PT Programming Manual
Feature Programming References
-
1.17.6 Direct Inward System Access (DISA)
Display Information• [130] Decimal Point Position for Currency• [131] Currency
Feature Guide References1.20.4 Display Information
Do Not Disturb (DND)• [507] DND Override
Feature Guide References1.3.1.3 Do Not Disturb (DND)
Door Open• [207] Door Unlock Time• [512] Permission for Door Open Access
Feature Guide References1.17.2 Door Open
Doorphone Call• [720] Doorphone Call Destination• [729] Doorphone Number Reference
Feature Guide References1.17.1 Doorphone Call
Emergency Call• [304] Emergency Number
Feature Guide References1.5.4.2 Emergency Call
Executive Busy Override• [505] Executive Busy Override• [506] Executive Busy Override Deny
Feature Guide References1.8.2 Executive Busy Override
Extension Dial Lock• [510] TRS/Barring Level for Extension Dial Lock
Feature Guide References1.9.3 Extension Dial Lock
Extension Personal Identification Number (PIN)• [005] Extension Personal Identification Number (PIN)
PT Programming Manual 61
Feature Programming References
-
Feature Guide References1.28.1 Extension Personal Identification Number (PIN)
Extension Port Configuration• [007] DSS Console Paired Telephone• [600] EXtra Device Port (XDP) Mode
Feature Guide References2.1.1 Extension Port Configuration
External Feature Access (EFA)• [417] LCOT Flash/Recall Time
Feature Guide References1.11.7 External Feature Access (EFA)
Flash/Recall/Terminate• [418] LCOT Disconnect Time
Feature Guide References1.11.6 Flash/Recall/Terminate
Flexible Numbering/Fixed Numbering• [100] Flexible Numbering
Feature Guide References2.3.6 Flexible Numbering/Fixed Numbering
Floating Extension• [623] Incoming Call Distribution Group Name• [660] VM Group Floating Extension Number• [700] External Pager Floating Extension Number• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [811] Modem Floating Extension Number• [812] ISDN Remote Floating Extension Number
Feature Guide References2.3.7 Floating Extension
Group Call Distribution• [621] Incoming Call Distribution Group Delayed Ringing• [624] Incoming Call Distribution Group Distribution Method• [632] Maximum Number of Agents
Feature Guide References1.2.2.2 Group Call Distribution
62 PT Programming Manual
Feature Programming References
-
Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)• [471] Host PBX Access Code
Feature Guide References1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Hot Line• [204] Hot Line Waiting Time
Feature Guide References1.6.1.7 Hot Line
Idle Extension Hunting• [680] Idle Extension Hunting Type• [681] Idle Extension Hunting Group Member
Feature Guide References1.2.1 Idle Extension Hunting
Incoming Call Distribution Group Features• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [623] Incoming Call Distribution Group Name• [624] Incoming Call Distribution Group Distribution Method• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents
Feature Guide References1.2.2 Incoming Call Distribution Group Features
Integrated Services Digital Network (ISDN)• [420] BRI Network Type• [424] BRI Layer 1 Active Mode• [425] BRI Layer 2 Active Mode• [426] BRI Configuration• [427] BRI TEI Mode
Feature Guide References1.21.1 Integrated Services Digital Network (ISDN)
Intercept Routing• [203] Intercept Time• [604] Extension Intercept Destination
PT Programming Manual 63
Feature Programming References
-
• [625] Destination for Overflow Time Expiration
Feature Guide References1.1.1.6 Intercept Routing
Intercept Routing—No Destination• [006] Operator Assignment
Feature Guide References1.1.1.7 Intercept Routing—No Destination
Intercom Call• [003] Extension Number• [004] Extension Name
Feature Guide References1.5.3 Intercom Call
Internal Call Features• [720] Doorphone Call Destination
Feature Guide References1.1.2 Internal Call Features
Last Number Redial• [205] Automatic Redial Repeat Times• [206] Automatic Redial Interval
Feature Guide References1.6.1.4 Last Number Redial
Line Preference—Outgoing• [103] Idle Line Access (Local Access)• [500] Trunk Group Number
Feature Guide References1.5.5.2 Line Preference—Outgoing
Manager Features• [112] Manager Password• [511] Manager Assignment
Feature Guide References2.2.6 Manager Features
Multiple Subscriber Number (MSN) Ringing Service• [421] BRI DIL/DDI/MSN Selection• [426] BRI Configuration
Feature Guide References
64 PT Programming Manual
Feature Programming References
-
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Music on Hold• [710] Music Source Selection for BGM• [711] Music on Hold
Feature Guide References1.13.4 Music on Hold
Network Direct Station Selection (NDSS)• [511] Manager Assignment
Feature Guide References1.30.5.1 Network Direct Station Selection (NDSS)
Operator Features• [006] Operator Assignment
Feature Guide References2.2.5 Operator Features
Outgoing Message (OGM)• [631] Sequences in Queuing Time Table• [730] Outgoing Message (OGM) Floating Extension Number
Feature Guide References1.17.5 Outgoing Message (OGM)
Outside Destinations in Incoming Call Distribution Group• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method• [629] Queuing Hurry-up Level
Feature Guide References1.2.2.3 Outside Destinations in Incoming Call Distribution Group
Overflow Feature• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy• [628] Queuing Call Capacity• [632] Maximum Number of Agents
Feature Guide References1.2.2.6 Overflow Feature
Paging• [640] Extension User Groups of a Paging Group
PT Programming Manual 65
Feature Programming References
-
• [641] External Pagers of a Paging Group
Feature Guide References1.15.1 Paging
Parallelled Telephone• [600] EXtra Device Port (XDP) Mode
Feature Guide References1.11.9 Parallelled Telephone
Pause Insertion• [416] LCOT Pause Time
Feature Guide References1.5.4.7 Pause Insertion
PC Phone/PC Console• [601] Terminal Device Assignment
Feature Guide References1.32.2 PC Phone/PC Console
Portable Station (PS) Connection• [690] PS Registration• [691] PS Termination• [692] Personal Identification Number (PIN) for PS Registration
Feature Guide References1.25.1 Portable Station (PS) Connection
PS Directory• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [004] Extension Name
Feature Guide References1.25.3 PS Directory
PS Ring Group• [620] Incoming Call Distribution Group Member
Feature Guide References1.25.2 PS Ring Group
PS Roaming by Network ICD Group• [620] Incoming Call Distribution Group Member• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method
66 PT Programming Manual
Feature Programming References
-
Feature Guide References1.30.6.1 PS Roaming by Network ICD Group
PT Programming• 2.1 PT Programming• [516] Programming Mode Limitation
Feature Guide References2.3.2 PT Programming
Queuing Feature• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents
Feature Guide References1.2.2.4 Queuing Feature
Reverse Circuit• [415] LCOT Reverse Circuit
Feature Guide References1.5.4.5 Reverse Circuit
Software Upgrading• [190] Main Processing (MPR) Software Version Reference
Feature Guide References2.3.8 Software Upgrading
Special Carrier Access Code• [303] Special Carrier Access Code
Feature Guide References1.5.4.9 Special Carrier Access Code
Speed Dialling—Personal/System• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [509] TRS/Barring Level for System Speed Dialling
Feature Guide References1.6.1.5 Speed Dialling—Personal/System
Station Message Detail Recording (SMDR)• [800] RS-232C Parameter—New Line Code• [800] RS-232C Parameter—Baud Rate• [800] RS-232C Parameter—Word Length
PT Programming Manual 67
Feature Programming References
-
• [800] RS-232C Parameter—Parity Bit• [800] RS-232C Parameter—Stop Bit Length• [802] SMDR Page Length• [803] SMDR Skip Perforation• [804] SMDR Outgoing Call Printing• [805] SMDR Incoming Call Printing
Feature Guide References1.26.1.1 Station Message Detail Recording (SMDR)
Tenant Service• [001] System Speed Dialling Number• [006] Operator Assignment• [320] ARS Mode• [711] Music on Hold
Feature Guide References2.2.3 Tenant Service
TIE Line Service• [453] DID Destination• [500] Trunk Group Number
Feature Guide References1.30.1 TIE Line Service
Time Service• [101] Time Service Switching Mode• [102] Time Service Starting Time• [514] Time Service Manual Switching
Feature Guide References2.2.4 Time Service
Toll Restriction (TRS)/Call Barring (Barring)• [300] TRS/Barring Override by System Speed Dialling• [301] TRS/Barring Denied Code• [302] TRS/Barring Exception Code• [501] TRS/Barring Level• [509] TRS/Barring Level for System Speed Dialling• [602] Class of Service
Feature Guide References1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
Trunk Access• [400] LCOT/BRI Trunk Connection• [401] LCOT/BRI Trunk Name• [409] LCOT/BRI Trunk Number Reference• [500] Trunk Group Number
68 PT Programming Manual
Feature Programming References
-
Feature Guide References1.5.5.3 Trunk Access
Trunk Answer From Any Station (TAFAS)• [700] External Pager Floating Extension Number
Feature Guide References1.17.3 Trunk Answer From Any Station (TAFAS)
Trunk Busy Out• [511] Manager Assignment
Feature Guide References1.5.4.6 Trunk Busy Out
Trunk Call Limitation• [472] Extension-to-Trunk Call Duration• [473] Trunk-to-Trunk Call Duration• [502] Trunk Call Duration Limitation
Feature Guide References1.11.8 Trunk Call Limitation
Verification Code Entry• [120] Verification Code• [121] Verification Code Name• [122] Verification Code Personal Identification Number (PIN)• [123] Verification Code COS Number
Feature Guide References1.9.6 Verification Code Entry
Virtual PS• [690] PS Registration
Feature Guide References1.25.6 Virtual PS
Voice Mail (VM) Group• [601] Terminal Device Assignment• [660] VM Group Floating Extension Number
Feature Guide References1.24.1 Voice Mail (VM) Group
Voice Mail DPT (Digital) Integration• [201] Transfer Recall Time
Feature Guide References
PT Programming Manual 69
Feature Programming References
-
1.24.3 Voice Mail DPT (Digital) Integration
Walking COS• [005] Extension Personal Identification Number (PIN)
Feature Guide References1.9.5 Walking COS
Walking Extension• [007] DSS Console Paired Telephone
Feature Guide References1.28.3 Walking Extension Features
Wireless XDP Parallel Mode• [515] Wireless XDP Parallel Mode for Paired Telephone
Feature Guide References1.25.5 Wireless XDP Parallel Mode
70 PT Programming Manual
Feature Programming References
-
PT Programming Manual 71
Notes
-
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
PSQX4954YA
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use
only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
Panasonic Communications Co., Ltd. 2008
KK0808HS1049
Table of Contents1 Overview1.1 Introduction1.1.1 Introduction1.1.2 Password Security1.1.3 Entering Characters
2 PT Programming2.1 PT Programming2.1.1 Programming Instructions2.1.2 Maximum Values2.1.3 Basic Programming2.1.4 System Management Programming2.1.5 Timer Programming2.1.6 TRS/Barring/ARS Programming2.1.7 Trunk Programming2.1.8 COS Programming2.1.9 Extension Programming2.1.10 Resource/Interface Programming2.1.11 SMDR & Maintenance Programming2.1.12 Card Programming
3 Appendix3.1 Revision History3.1.1 KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.0xxx
Feature Programming References