Download - Quick Frames
Waiting for location & sizing Wrong locations & wrong size Re-work Difficult installations (welding/fire) Forgotten frames (roof drains, etc.) Expensive and takes too long Roof frames are a pain in the ___!
ROOF FRAME FRUSTRATIONS
QUICKFRAMES HISTORY
Family of Inventors
2001: Jay Soyko creates a frame due to accident
2004: US Patent
2011: Soyko Industries LLC
2012: Reaches over 2,500 frames sold!
2013: Becoming the Industry Standard
Jay Soyko & Friends
WHAT IS A QUICKFRAME?
Bolt-on Patented Adjustable Pre-engineered Roof Opening
Frame
RUT’S Sky lights Roof drains Exhaust fans Anything that
needs sub-desk support
APPLICATIONS
Commercial buildings Pre-engineered buildings New construction Tenant improvement Panelized wood roof system
PROJECT TYPES
Lower cost = lower bids & more savings Eliminates the need for detailing Avoids risk of fire in the roof or below Faster install time by 4.5 times Adjusts to site conditions Increased productivity – after the deck Reduce project delays No welding = no inspections & no skilled labor
BENEFITS
Laboratory tested and approved for use by◦ Phoenix National Laboratories◦ Caruso Turley Scott Structural Engineers
Engineering for nearly everywhere in US◦ CTS will provide specific engineering as needed
When specific engineering is required, QuickFrames will provide for order over three frames
PRE-ENGINEERED
12 ga Frame x 48” 6’ – 6040 lbs. 8’ – 2760 lbs. 10’ – 2060 lbs.
16 ga Frame x 48” 6’ – 1588 lbs. 8’ – 740 lbs. 10’ – 200 lbs.
WEIGHT LIMITATIONS
*Weights based on equally distributed loading. Seismic Load Category B – Snow Load 20 PSF – Dead/Live Load 10 PSF/ 20 PSF
(roof structure bearing on frame) Wind Load 90 mph, exposure C For Areas with code design greater than what our engineering states CTS can
provide site specific design.
4’ 35” 51"-60" 13” <48> 12” = total 25”
5’ 40” 61"-70" 20” <60> 10” = total 30”
6’ 45” 71"-80" 27” <72> 8” = total 35”
8’ 60” 81"-110" 36” <96> 14” = total 50”
10’ 75” 111"-135" 45” <120> 15” = total 60”
15” 15"-20" 5”
20” 21"-30" 10”
25” 31"-40" 15”
30” 41"-50" 20”
35” 51"-60" 25”
40” 61"-70" 30”
45” 71"-80" 35”
60” 81"-110" 50”
75” 111"-135" 60”
Cross Rail Chart
Joist Rail Size Opening Size Adjustability
ADJUSTABILITY
SIMPLE ORDERING
500 Frames per Truckload
SHIPPING
SHIPPING JUST A FEW?
The only tool required is a ¾” wrench
We recommend a cordless impact driver
Typical install takes roughly 20-30 mins
INSTALLATION
Do you know the cost of a average welded roof frame?
$500 - $1,500 depending on region QuickFrames is between $195 -$325 Skylights $130 - $185 No special inspections No welding / TI Pick-up the same day
COST BENEFITS
CASE STUDY – FIRST SOLAR
Wrong Orientation◦ 376 Skylights
Missed Frames◦ 80 Rood Drains/RTU’s
Wrong Locations◦ 20+
Cost Savings in Excess of
$675,000
THE PROBLEM(S)
Mark Fultz VP of OperationsAble Steel Fabricators
“On our recent project of a 1.3 million square foot warehouse, utilizing QuickFrames allowed us to exceed the initial schedule by 4 weeks. When you’re talking minutes as opposed to hours to install a frame that has adjustment capabilities if there is a problem, [it] was an easy decision for us. We will never go back to the old way.”
TESTIMONIALS
Nikki Wood, Project EstimatorBell Steel
“The entire process with QuickFrames was smooth and easy. I called them and they immediately were on top of handling my order. They personally came to our location to get the information on what we needed, took the time to confirm the details were accurate, and got it ordered. The project went quickly and QuickFrames was able to accommodate everything we asked for, even up to last minute changes. By using QuickFrames, a ton of my shop time was freed up, and the end result looks great. The frames blend into the roof seamlessly and if I need to move them, I can do so in a snap. I will choose QuickFrames every time over traditional frames.”
TESTIMONIALS
Website DWG Files Full Engineering Report Submittals Installation Videos Written Spec
TOOLS FOR CONTRACTORS
EVOLUTION OF THE ROOF FRAME
PICTURE TRIVIA
THANKS!