R/451/SKBU/14 14/08/2014
Tender
Sealed quotations are invited for supply of Equipment for Physics & Chemistry Department,
SIDHO KANHO BIRSHA University from reputed vendors having valid up to date I.T., VAT,
Service Tax and Professional Tax clearance certificate and experience for at least two years for
supplying similar type of items. Tender document may be downloaded from the University
website www.skbu.ac.in and the same after filled up must be submitted in a sealed envelope
addressed to The DIC Physics Department, SIDHO KANHO BIRSHA University, Purulia,
723101, West Bengal with a DD of Rs.500/- (non-refundable) for placing quotation with
Physics department and The DIC Chemistry Department, SIDHO KANHO BIRSHA
University, Purulia, 723101, West Bengal with a DD of Rs.500/- (non-refundable) for placing
quotation with Chemistry department. DD will be drawn on any Bank having Service Branch
at Purulia and be issued in favour of “SIDHO KANHO BIRSHA University” payable at
Purulia.
Last date of receiving tender document either by hand or by post: 01.09.2014 up to 12:00
hrs.
Bidders must comply the Terms and Conditions as mentioned in the Annexure-1 of the Tender
Documents. For specifications of the above items please refer Annexure-2 for Physics and
Annexure 3 for Chemistry department of the Tender Documents.
Note: For any sorts of query for Physics department, please contact the undersigned at
For any sorts of query for Chemistry department, please contact the undersigned at
Registrar
SKB University, Purulia -723101
Annexure-1
TERMS AND CONDITIONS
1. a)Quotations are invited in duplicate sets complying the requirement for tender as detailed
in the tender specification to be submitted in the company’s/firm’s letter headhead neatly
printed/typed duly signed by authorised person with the seal of the bidders. Corrections, if any,
shall be made by crossing out accompanied with initial of the bidder and rewriting.
b) All duties, taxes and other levies payable by the contractor under the contract shall be
included in the total price but should be indicated separately in the price bid.
c) The rate quoted by the bidder shall be fixed for the duration of the contract and shall not be
subject to adjustment on any account.
d) Bid should be submitted into two envelops, one for Technical Bid and another for Price Bid.
2. Cost of tender paper: Cost of tender paper @ Rs.500/- will be met by the bidder through
Bank draft on any Bank having Service Branch at Purulia drawn in favour of “SIDHO KANHO
BIRSHA University” payable at Purulia. Such costs are non-refundable.
3. Evaluation of Quotation:
The Purchaser will evaluate and compare the quotations determined to be substantially
responsive stage wise. Firstly, Technical Bid will be evaluated and thereafter Price Bid for
qualified bidders after Technical Bid evaluation will be evaluated for selection of vender. Thus,
Price is not the sole consideration for selection of vendor.
4.Award of Contract: The purchaser will award the contract to the bidder whose quotation has
been determined to be substantially responsive both technically and commercially. Purchaser
reserves the right to reject any or all the tender, wholly or partly, without assigning any reason
thereof and shall not be bound to accept the lowest bid.
5.Warranty: The vendor shall be fully responsible for the comprehensive onsite warranty in
all respect of the equipment, accessories etc. including spares and services for a period of
minimum one year from the date of installation. Warranty will be effective from the date of
joint installation Report. Onsite maintenance charges, for the post warranty period must be
quoted in financial bid per year.
6.Adequate support service facility: The bidder/manufacturer should have adequate service
support centre in Purulia for any emergency breakdown/fault offering facility within 24 hours
and should be agreeable to provide AMC facility after the warranty period.
Service Level commitment: - Machine fault maintenance will be given through email/Phone/In
person. Machine should be making good in running condition.
A: - Response Time – 8 hr.
B: - Normal rectify Time – 48 hr.
C: - Maximum Time – 72 hr.
7.User training regarding the operation of the equipment shall be arranged by the
supplier/vendor at no extra cost.
8. Document in support of Manufacturer/Dealer and Service Provider has to be submitted along
with the tender paper. If the bidder is not the manufacturer, proper manufacturer’s authorization
and warranty from manufacturer is required.
9.Documents of previous experience for similar trade, at least for 2 years, must be submitted
along with the tender.
10. Bidder must have adequate documents relating to Trade License and updated returns for
Income Tax, Professional Tax, Service Tax and VAT.
11.Time Schedule: The supply and installation work must be completed within 15 days from
the date of receipt of the purchase order. If the vendor fails to deliver or install the equipment
within 15 days from date of P.O. acceptance or the extended date communicated by SKB
University, it will be breach of contract. Liquidated damages rate for the delay in delivery is
0.5% per week and maximum 5% of the total amount.SKB University reserves the right to
cancel the order in the event of delay in delivery /installation/commissioning of equipment and
forfeit the Earnest Money Deposit.
12.Validity of offer: A bidder should spell out in the tender that it shall remain valid for a
minimum period of three months from the date of opening of the tender and during this period,
the bidder shall not be entitled to revoke or cancel its offer.
13. Place of delivery: Department of Physics, SIDHO KANHO BIRSHA University, Purulia,
West Bengal, India, PIN-723101.
14. 90% of the payment will be made after delivery and installation of the equipment and
balance 10 percent will be made after six months of the date of installation of the particular
item.
15. In case of any dispute, the University’s decision will be treated as the final and conclusive.
All legal actions are subject to Kolkata jurisdiction only.
16.The tender documents shall be addressed and submitted to: Dr. G M Helaluddin, DIC of
Dept. of Physics, SIDHO KANHO BIRSHA University, Purulia, West Bengal, India, PIN-
723101 Last date of receiving tender document: 01/09/14 (Up to 12:00 hrs.) and the tender
will be opened on 01/09/2014 at 2 pm
17.No Tender document will be received by the department after the above date irrespective of
the mode of submission of tender document.
18.Bidder must sign on every pages of the tender document along with the seal Quotation must
be submitted through official pad of the bidder duly signed with seal and contact numbers of
the respective person of the bidder concern.
19.Those bidders who do not receive any communication for supply of instruments may
presume that their bids have not been accepted by the institute.
20.Quantity as stated hereinabove may subject to change at the time of issuing purchase order
due to the fund crunch or for other valid reasons.
21.University may take decision about non-purchase of the said equipment even after selection
of vendor due to its fund constraints.
22.Earnest Money Deposit will be : ₹ 5000/- in the form of a demand draft issued by a
scheduled commercial bank favoring SIDHO KANHO BIRSHA University, payable at ,
Purulia must be submitted along with the Offer. Offers not accompanied with Earnest Money
Deposit of the said amount will not be accepted. This amount will be forfeited, if (being
selected by SKBU as L1 Bidder) the Bidder refuses to accept purchase order or having accepted
the purchase order, fails to carry out his obligations mentioned therein. Bank Guarantee in lieu
of Earnest Money Deposit will not be accepted. No interest will be payable on the Earnest
Money Deposit. The Earnest Money Deposit will be refunded to the unsuccessful Bidder. The
Earnest Money will be converted to security deposit in case of successful bidder and will
remain deposited with SIDHO KANHO BIRSHA University till the end of one year warranty
in an interest free form
-----------------------------------------------------------
Signature of the Bidder (with date and seal)
DEPARTMENT OF PHYSICS, Sidho-Kanho-Birsha University, Purulia
Sl
No Name of the Equipments Specifications
Make
&
Model
Unit
Price(₹)
1
Optical Fibre communication kit Laser, PD, Optical
fibre=2Km) with NA
measurements
2
Multimeter Ohm, A, V, C, L,
Diode/Transistor test, AC/DC
measure
3 Ammeter Analog (0-30mA)
4 Ammeter Analog (0-10mA)
5 Ammeter Analog (0-100mA)
6 Voltmeter Analog (0-10mA)
7 Voltmeter Analog (0-30mA)
8 Voltmeter Analog (0-100mA)
9 CRO 100MHz, Storage, Make:
NVIS
10 CRO 30 MHz, Make: NVIS
11 CRO 70 MHz, Make: NVIS
12 CRO 60 MHz, APLAB 3935R
13 CRO 100 MHz (Storage), APLAB
14 Signal generator 60MHz (sine, square, triangle)
15 Signal generator 20MHz (sine, square, triangle)
16 Signal generator 10MHz (sine, square, triangle)
17 Study of modulation and demodulation Make:SES instr. Pvt. Ltd.
18 Microprocessor-8085 board Programmable
19 Microprocessor-8086 board Programmable
20 USB GPS dongle GPS receiver
21 GPS Trainer Kit Kitek, ACT-15
22 Power supply -15V to +15V variable, step-
0.5V
23 Power supply -15 to +15V fixed
24 Power supply 0-30V, 6mA, Make: Acopian
N030HP2
25 7 segment display Standard specification
26
Microwave generation (Klystron) and
modulation experiment spares: Klystron ,
detector etc.
Microwave modulation
kit(complete set)
27 Capacitance box (variable: 1 to 100 microF,
double dial type)
28 Capacitance box (variable: 0.1 to 1 microF,
single dial type)
29 Capacitance box (variable: 10 to 100 picoF,
single dial type)
30 Resistance box 0.1 to 10 Ohm, Manganine
coil
31 Resistance box 1 to 1000 Ohm, Manganine
coil
32 Resistance box 100 Ohm to 100 Mega-Ohm,
Manganine coil
33 Continuous Variable Resistance /
Rheostate
0 to 1000 Ohm, 1 Amp
34 Remote Slide changer with laser pointer Logitech
35 DPPH solid sample as spare for ESR
experiement SES, ESR-105 compatible
36 Detector for He-Ne laser + power meter 2 mW power [Branded]
37 Beta sensitive G M Counter + 3
different radioactive sources
complete set [Manufacturer:
Para Electronics, Mumbai or
Better]
38 Single channel analyzer based Gamma
ray spectroscopy system
(complete set) [Manufacturer:
Para Electronics, Mumbai]
39 Gamma & Beta ray sources for GM
Counter experiments Standard
40 Frank-Hertz Experiment set up complete set [SES, FH-3001]
41 Franck-Hertz Tube/Valve for SES, FH-3001 set up
42 Planck's Constant Experiment set up By
LED's complete set [SES, PCA-01]
43
Michelson Interferometer [including He-
Ne Laser, Na & W-lamps, and Air
Chamber with Gauge facilities] with
one set of extra Mirrors, glass plates and
Na-lamp as spare
complete set [Lambda
Scientific, LEOI-20]
44 Fabry-Perot Interferometer complete set [Lambda
Scientific, LEOI- 18]
45
Jamin's interferrometer for measuremen
of the refractive indices of glasses and
liquids
Reputed brand
46 Diffraction Intensity Measurement
System using Laser sources
complete set [Lambda
Scientific, LEOI-30]
47 Blackbody Radiation Experimental
System Complete set [Lambda
Scientific, LEOI-63]
48
CE amplifier characteristic study for AC
load variation with and without
feedback stage
Complete seup
49
Study of OPAMP (IC 741)
characteristics and its use as an inverting
amplifier, non-inverting amplifier, adder
and differential amplifie
Complete seup
50 Design and study of current mirror
biasing Complete seup
51 Study the characteristics of a light
dependent resistance (LDR) Complete seup
52 Fibre Optics Kit Complete setup
53 Four Probe setup for resistivity
measurement SES, DFP-RM
54 Optical transmission grating 250 lines per mm, imported
55
Crystallographic Models: simple cubic,
body centred cubic, face centerd cubic,
hexagonal close packed, diamond, ZnS,
CsCl, NaCl, model with surface
dangling-bonds of Si
One set, Good quality
56
Crossed Diffraction Grating for
diffraction experiment using Laser
source
100 diffraction elements per
mm [Imported]
57
Crossed Diffraction Grating for
diffraction experiment using Laser
source
200 diffraction elements per
mm [Imported]
58 Digital Lux meter to measure the light
intensity of LED, 60 W Bulb, etc. (Branded)
59 p-type single crystalline Ge (100) or Ge
(111) wafer
Resistivity 1- 20 Ohm cm,
single side polished, 3 inch
diameter and 0.5 mm
thickness
60 n-type single crystalline Ge (100) or Ge
(111) wafer
Resistivity 1- 20 Ohm cm,
single side polished, 3 inch
diameter and 0.5 mm
thickness
61 Na vapor lamp 35 W [Phillips]
62 He discharge tube [Branded]
63 Ne discharge tube [Branded]
64 Hydrogen discharge tube [Branded]
65 Power supply for He, Ne, and Hydrogen
discharge tubes Variable voltage type
66 Hg Thermometer (-10 to 200 deg C with
0.5 deg div.)
(-10 to 200 deg C with 0.5
deg div.) Zeal make
67 Fortin Barometer Branded
68 Travelling microscope Vertical & Horizontal
motions with VC = 0.001 cm
69 Slide Callipers with V.C. = 0.01 cm or lower
and made of Stainless Steel
70 Screw Guage
with V.C. = 0.001 cm or
lower and made of Stainless
Steel
71 Optical Bread board 5'x3'x6" [Holmarc / Branded]
72 Vibration isolation breadboard 2'x2'x6" [Holmarc / Branded]
73
Determination of Saturation Magnetizati
on, Retentivity and Coercivity of given
Ferromagnetic samples using Hysteresis
loop tracer + two extra samples as spare
SES, HLT-III (complete set)
74
Thermoluminescence of F-centers in
Alkali Halide crystals set up + three
extra samples as spare
SES, TLX - 02 (complete
set)
75 Temperature dependent Hall effect
apparatus + two extra samples as spare SES, HEX-22 (complete set)
76
Measurement of Magnetoresistance
with one extra heating arrangement +
two extra samples as spare
SES, MRX-01 (complete set)
77
Heating arrangement for
Magnetoresistance and Hall effect set
ups
compatible with SES, MRX-
01 set up
78 Arsenic-doped single crystalline Si
(111) wafer
Resistivity 1- 10 Ohm cm,
single side polished, 3 inch
diameter and 0.5 mm
thickness
79 n-type single crystalline Ge (100) or Ge
(111) wafer
Resistivity 1- 20 Ohm cm,
single side polished, 3 inch
diameter and 0.5 mm
thickness
80 Mesurement of dielectric constants +
two extra samples as spare SES, DEC-600 (complete set)
81 Double beam UV-VIS
spectrophotometer
Spectral Range: 190 nm to
1100 nm, Wavelength
resolution: 1 nm ,
Photometric noise: <0.00005
Abs) [Make - Shimadzu,
Model -1800 PC Or any other
better quality] (complete set)
82 Analytical Balance
Capacity: 220 gm,
Readibility: 0.1 mg [Mettler
Toledo Or any other better
quality]
83 Microcentrifuge
Make - Tarsons, Model -
SPINWIN, M01, Code - 1020
+ compatible centrifuge tubes
1 pkt.
84 Ultrasonic cleaner
Capacity about 3 Ltr.
[complete set with one extra
tray] Reputed brand
85
Scaning Tunneling Microscope (STM)
with controller + 10 Tips (Probes) as
spare
Nanosurf Easyscan2 STM or
any other better quality
[complete set]
86 Hg Thermometer (-10 to 200 deg C with 0.5
deg C division) [Zeal make]
87 Synthesized function generator 30 MHz Stanford Research System
DS345
88 Electrometer Keithley 6514 System
Electrometer
89 CRO 50 MHz with Probes Make: Tektronic or Better
90 CRO 30 MHz with Probes Make: Tektronic or Better
91 AC for Condensed Matter Physics
Special Laboratory
(Split AC, 1.5 Ton, 3 to 4
Stars) + including installation
charge
92
Online UPS [for Condensed Matter
Physics lab] for 1 h power back up +
installation charge
2 kVA (220 V, 50 Hz output,
pure Sine wave) [APC make]
93 Refrigarator 180 L [Gordrej/LG make]
94 Power Stabilizer
5 kVA, 230 V and 50 Hz
single phase out put [Reputed
brand]
95 Spectrum analyzer & Other related
accessaries connecting to circuits
Make: HP, Model: 36570A
(FFT Dynamic analyzer)
96 Spectrum analyzer & Other related
accessaries connecting to circuits
Make: HP Model: 8565PC (30
Hz to 50 GHz, FFT Dynamic
Analyzer)
97 Optical Spectrum Analyzer Make: HP, Model: 70950B