1RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED300 | LED AREA LIGHT
RAB DESIGN LIGHTING INC. 222 Islington Avenue, Toronto, ON M8V 3W7 • TEL. 1 800-268-0381 RABDESIGN.CA03 | 201 7
1RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
DESCRIPTIONThe AL-LED fixtures are high efficiency area lights with multiple beam patterns to suit a variety of applications. Intelligently designed, this series of fixtures provide superior lighting performance and significant energy savings over traditional fixtures.
AL3-LED320 LED Area Light
Project Type Date Notes
5YEA
R WARRA
NT
YWE
T LO CATION
AP
PROVED FOR
IP65RATED
easy
INSTALLATIO
N
INSTALLATION
*The above specs apply to the standard product configuration - AL3-LED320, 120V, 5K. For spec information on other product configurations please see page 2. NOTE: Not all of our product configurations are qualified on the DLC QPL. To view all of our DLC qualified products please visit the DLC qualified products list at www.designlights.org/qpl.
SPECIFICATIONS*
Watts 315
Lumens 38,551
Efficacy 122
Replaces Up To 1,000W MH
Colour Temp 5,000K*, 4,000K, 3,000K
Operating Temp -40˚C to +40˚C
Voltage 120-277*, 120, 347
LED Life 100,000 hours
Housing Material Die Cast Aluminum
Lens Material Clear Polycarbonate
Beam Pattern Type 2,3,4,5
Total Harmonic Distortion 6.31%
Power Factor 0.99
Mounting Options
• Slipfitter for 2 3/8” Tenon• Wall Mount Bracket• 6”/12” Straight Arm for
Round/Square Pole• 6” Die Cast Arm for 4”
Diameter Pole• Yoke
APPLICATIONS FEATURES• High efficiency area lights with
multiple beam patterns to suit a variety of applications.
• Fixture provides superior lighting performance at approx. 115 lumens per watt with T2, T3, T4, and T5 beam pattern options.
• Superior heat sinking with air-flow fins on the top.
Parking Lots Roadways Perimeter Lighting
2RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
OTHER MODEL SPECIFICATIONS
MODEL DESCRIPTION VOLTAGE (V) INPUT POWER (W)
LIGHT OUTPUT
EFFICACY (Lm/W) THD PF BUG RATING
AL3-LED320-B-3K-T2-XXX-DIM 120-277 314.8 38422 122.05 6.54 0.9947 B4-U3-G4
AL3-LED320-B-4K-T2-XXX-DIM 120-277 314.2 41431 131.86 6.59 0.9944 B4-U3-G4
AL3-LED320-B-5K-T2-XXX-DIM 120-277 315.1 43081 136.72 6.48 0.9942 B4-U3-G4
AL3-LED320-C-3K-T2-XXX-DIM 347-480 312.5 37978 121.53 8.14 0.9854 B4-U3-G4
AL3-LED320-C-4K-T2-XXX-DIM 347-480 313.2 41160 131.42 8.02 0.9879 B4-U3-G4
AL3-LED320-C-5K-T2-XXX-DIM 347-480 313.9 43022 137.06 8.11 0.988 B4-U3-G4
AL3-LED320-B-3K-T3-XXX-DIM 120-277 314.9 35530 122.83 6.34 0.9947 B4-U3-G5
AL3-LED320-B-4K-T3-XXX-DIM 120-277 313.1 37820 120.79 6.39 0.9947 B4-U3-G5
AL3-LED320-B-5K-T3-XXX-DIM 120-277 315.4 38551 122.23 6.31 0.9945 B4-U3-G5
AL3-LED320-C-3K-T3-XXX-DIM 347-480 315.6 35238 111.65 8.07 0.988 B4-U3-G5
AL3-LED320-C-4K-T3-XXX-DIM 347-480 312.5 37790 120.93 8.21 0.9882 B4-U3-G5
AL3-LED320-C-5K-T3-XXX-DIM 347-480 313.1 38493 122.94 8.14 0.9882 B4-U3-G5
AL3-LED320-B-3K-T4-XXX-DIM 120-277 314.6 35361 112.40 6.37 0.9949 B4-U3-G5
AL3-LED320-B-4K-T4-XXX-DIM 120-277 313.8 37873 120.69 6.41 0.9945 B4-U3-G5
AL3-LED320-B-5K-T4-XXX-DIM 120-277 313 38002 121.41 6.48 0.9945 B4-U3-G5
AL3-LED320-C-3K-T4-XXX-DIM 347-480 315.1 35264 111.91 8.15 0.9878 B4-U3-G5
AL3-LED320-C-4K-T4-XXX-DIM 347-480 311.2 37084 119.16 8.29 0.9876 B4-U3-G5
AL3-LED320-C-5K-T4-XXX-DIM 347-480 313.2 38635 123.36 8.21 0.9878 B4-U3-G5
AL3-LED320-B-3K-T5-XXX-DIM 120-277 312.7 37646 120.39 6.58 0.9948 B5-U3-G4
AL3-LED320-B-4K-T5-XXX-DIM 120-277 313.3 40477 129.2 6.45 0.9948 B5-U3-G4
AL3-LED320-B-5K-T5-XXX-DIM 120-277 315.4 43438 137.72 6.47 0.9949 B5-U3-G4
AL3-LED320-C-3K-T5-XXX-DIM 347-480 315.6 38313 121.4 8.03 0.9878 B5-U3-G4
AL3-LED320-C-4K-T5-XXX-DIM 347-480 312.1 40828 130.82 8.11 0.9875 B5-U3-G4
AL3-LED320-C-5K-T5-XXX-DIM 347-480 313.5 43622 139.15 8.07 0.9879 B5-U3-G4
LEGENDB - 120V–277V, C - 347V3K - 3000K, 4K - 4000K, 5K - 5000KT2 - TYPE 2, T3 - TYPE 3, T4 - TYPE 4, T5 - TYPE 5XXX - HOUSING FINISHDIM - DIMMABLE
3RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
CANDELA PLOTS
EPA RATING
.1.2.512510
0’
30’
30’
60’
60’
90’
90’
120’
120’
150’
150’
0’30’ 30’ 60’60’ 90’90’ 120’120’ 150’150’
AL3-LED320 5K TYPE II MOUNTED ON A 30 FOOT POLE
.1
.2 .5 12
AL3-LED320 5K TYPE IV MOUNTED ON A 30 FOOT POLE
0’
30’
30’
60’
60’
90’
90’
120’
120’
150’
150’
180’
180’
0’30’ 30’ 60’60’ 90’90’ 120’120’ 150’150’ 180’180’
.1.2.512
AL3-LED320 5K TYPE III MOUNTED ON A 30 FOOT POLE
0’
0’
30’ 30’
30’
30’
60’60’
60’
60’
90’
90’
90’
90’ 120’120’
120’
120’
150’150’
150’
150’
180’180’
180’
180’
.1
.2
.5
1
2
AL3-LED320 5K TYPE V MOUNTED ON A 30 FOOT POLE
0’
0’
30’ 30’
30’
30’
60’ 60’
60’
60’
90’90’
90’
90’
120’120’120’
120’
AL3-LED320 5K TYPE || MOUNTED ON A 30 FOOT POLE
AL3-LED320 5K TYPE |V MOUNTED ON A 30 FOOT POLE
AL3-LED320 5K TYPE ||| MOUNTED ON A 30 FOOT POLE
AL3-LED320 5K TYPE V MOUNTED ON A 30 FOOT POLE
0° TILT: 1.02
90° TILT: 4.06
45° TILT: 2.90
4RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
OFSheet: 21
.31in8mm
2.00in
50.80mm
2.95in75mm
3.44in
87.50mm
6.22in
158mm
2.95in75mm
(I.D. 2.52 in)I.D. 63.98 mm
3.35in85mm
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE Feb 12, 2014 PaulW
DO NOT SCALE DRAWING
SEE INDIV. PARTS
DWG No.
AREV No.
Part No.
Material:
Description:
SEE INDIV. PARTSFinish:
Date:
Designed By:
Date:March 16,2016Bianca Jerca
Drawn By:
Date:
Dwg.Approved.By:
SLIP FITTER
ASize:
mm 1:2.5Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
7.87in200.0mm
4.61in117.0mm
6.14in156.0mm
2.99in76.0mm
2.36in60.0mm
5.91in150.0mm
4.72in120.0mm
4.33in110.0mm
7.87in200.0mm
2x 0.36in9.2mm
4x 0.52in13.1mm
MOUNTING OPTIONS
DIMENSIONS
18.50in470mm
25.71in653mm
16.08in408mm
4.12in105mm
Slipfit Mount for 2 3/8” Tenon Optional - Factory Installed
Weight = 35lbs
Wall Mount Bracket Optional - order separately
with slipfitter
5RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
2.60in66mmMIN.
3.39in86mmMAX.
2.00in51mm
5.51in140mm
5.88in149mm
2.95in75mm
5.51in140mm
2.95in75mm
4.00in102mm
MOUNTING OPTIONS
12.008in305mm
2.953in75mm
2.000in51mm
VARIES2.953in
75mm
.354in9mm
1.000in25mm
OFSheet: 11
5.04in128.0mm
5.53in140.4mm
2.52in
64.0mm
4.53in115.0mm
0.87in 22.2mm THRU
0.43in 11.0mm THRU
1.49in37.9mm
1.49in37.9mm
1.97in50.0mm
2X 0.31in 8.0mm THRU
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE APRIL 17 2015 BIANCA J
DO NOT SCALE DRAWING
ALUMINUM ALLOW
DWG No. REV No.
Part No.
Material:
Description:
195751
PAINTEDFinish:
Date:Designed By:
Date:APRIL 17 2015BIANCA J.
Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
12” Straight Arm for Square Pole Optional - order separately
(6” Straight arm also available)
6” Die Cast Arm for 4” Round Pole Optional - order separately
Round Pole Mount Optional - order separately
Yoke Optional - Factory Installed
2.000in
50.80mm
2.
000i
n50
.80m
m
0.177inR4.50mm
12.008in
305.00mm
2.
953i
n75
.00m
m
OFSheet: 11
5.04in128.0mm
5.53in140.4mm
2.52in
64.0mm
4.53in115.0mm
0.87in 22.2mm THRU
0.43in 11.0mm THRU
1.49in37.9mm
1.49in37.9mm
1.97in50.0mm
2X 0.31in 8.0mm THRU
REV. DESCRIPTION DATE REV. BYA INITIAL RELEASE APRIL 17 2015 BIANCA J
DO NOT SCALE DRAWING
ALUMINUM ALLOW
DWG No. REV No.
Part No.
Material:
Description:
195751
PAINTEDFinish:
Date:Designed By:
Date:APRIL 17 2015BIANCA J.
Drawn By:
Date:Dwg.Approved.By:
RFL3/RFL4 YOKE
ASize:
inch 1:2Scale:Dims:
This drawing is issued in the strictest confidence and shall not be used for, or as the basis of the manufacture of any product in whole or in part, without the express written consent
of RAB Design Lighting Inc., © 2014
THIS PART TOLERANCE GRADE:
4.0°2.0°2.0°1.0°1.0°
GRADEANGLE40.01
~~
13.0140.00
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
~
5.0113.00
~
5.001.51
~~
0.500.16
~
0.15 0.511.50
DIM
1
3
54
2 0.012
0.0280.039
0.018
0.0080.0080.006
0.0180.028
0.0120.0120.018
0.008
0.004 0.0060.0280.018
0.0390.059
0.0280.0590.079
0.039
0.012 0.0180.0590.039
0.0790.118
0.0590.1180.157
0.079
0.028 0.039
6RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
Operating Temperature -10°C to +40°C
Humidity Max. 95% RH
Detection Radius/Angle Max Meters/360°
Mounting Height Max 40ft
Remote Range
50ft. (15m) indoor, no backlight
Certification IP66, cULus
Warranty 5 years
DESCRIPTION
The DMS mounts in an outdoor/indoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, and is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.
OPERATIONTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On or Off based on the ambient light level so that lighting remains on overnight even without motion detection.
WIRELESS REMOTE CONTROLInitial setup and subsequent sensor adjustments are made using a remote control. This remote control enables adjustment of parameters and is also used to initiate automatic calibration of the DMS ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at a low level when there is sufficient daylight. The remote control stores up to five sensor parameter profiles to speed the configuration of multiple sensors.
APPLICATIONSOutdoor or indoor applications, ideal for use with Highbay fixtures (HB-LED Series), Area Lights for poles <40’ high (AL-LED Series) or Linear vapourproof with junction box accessory (LFW-LED Series).
Power Supply 120-277VAC
Maximum Load at -40°C - 70°C
Resistive/Tungsten - 600W@120V
Ballast Electronic (LED) - 800/1200VA @120/277V
Dim Control Output
0-10V max. 25mA sinking current
DMS360° Passive Infra Red Dimming Motion Sensor
SPECIFICATIONS*
*See DMS specification sheet for more details.
FEATURES
• Provides line voltage On/Off switching and 0-1 0VDC dimming control
• Works with ballasts or LED drivers
• High and low modes fully adjustable from O to 1 0V
• Time delay from 5 to 30 minutes
• Optional cut off delay
• Adjustable ramp up and fade down times
• CLASS 2 for whole sensor
• Optional day lighting setpoints feature automatic calibration, and permit manual adjustment.
• Polycarbonate, flame retardant, UV resistant, impact resistant.
• UL773A and FCC.
7RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
DMS - DIMMABLE MOTION SENSOR
SENSOR DEFAULT SETTING
The sensor has the following default setting:
• Sensitivity – 100%
• Standby Time – 5 minutes
• Daylight setting –
• Dimming level – 20%
• Dimming time – 60 mins
WHERE:
1. Sensitivity is the responsiveness to detect movement.
2. Standby time denotes how long the lights remain at 100% lux levels once the sensor is activated
3. Daylight sensor setting sets the natural light levels needed for the sensor to shut off the fixture. The default setting deactivates the daylights sensor completely.
4. Dimming level indicates the level at which light drops after no motion has been detected during the standby time.
5. Dimming time is how long the light will remain at the low dim level on without activity before it turns off.
Sensor is fully adjustable. For custom settings, order Sensor Remote separately.
PROGRAMMING
· 0 – 10VDC dimming control
· Multi level dimming from 10%-30%
· Time delay can be set from 5 – 30 minutes
· 360° Range - 40 ft high x 30 ft across
The light either permanently turns ON / OFF. Sensor is disabled.
Turns the fixture ON with the last saved settings.
Set the sensitivity and range of the motion sensor.
When pressed, sensor will measure the Lux level of the surrounding area and save it. The light will adjust its dimming level based on the changes occurring with the surrounding ambient light
Set the Stand-by dimming level.
Set the dimming time period. (If set at 24H, the light stays ON). When sensor detects no motion it will stay ON at the dimming level set, for the chosen time.
Set the Lux level for the light to operate. The light will turn on after the surrounding light level is less than the light level set on the sensor except the daylight option which disables the Lux settings.
Set the hold – time. When sensor detects motion, the light stays on at the maximum light level for the hold-time period chosen.
Pressing this button will reset the light to default setting.1. 100% Sensor sensitivity2. 5 min stand-by time3. Lux level at daylight threshold4. 20% dimming level5. 60 min dimming period
Long press for 3-4s for the sensor to go into test mode which allows the user to test the motion sensor sensitivity in the daylight by disabling the dimming time period and lux level.
8RAB DESIGN LIGHTING INC. | 222 ISLINGTON AVENUE, TORONTO, ON, M8V 3W7 | TEL 1 800-268-0381 | RABDESIGN.CA
AL3-LED320 | LED AREA LIGHT
FIELD INSTALLED ACCESSORIES
Wall Mount Bracket (Order with slip fitter)
6” Straight Arm for Square Pole
12” Straight Arm for Square Pole
6” Straight Arm for 4” Diameter Round Pole
6” Straight Arm for 5” Diameter Round Pole
6” Straight Arm for 6” Diameter Round Pole
12” Straight Arm for 4” Diameter Round Pole
12” Straight Arm for 5” Diameter Round Pole
12” Straight Arm for 6” Diameter Round Pole
6” Die Cast Arm for 4” Diameter Round Pole
Wireless Remote Control
CHECK THE ACCESSORIES YOU WISH TO ORDER:
SF - The slipfit and yoke mounting option is factory installed. See below for field installed mounting options.
*Standard Configuration.
DMS - Can be used on poles at a maximum of 40’ high and for 120-277V only.
ORDERING GUIDE
WATTS
B - 120 - 277V*
A - 120V
C - 347V
5K - 5000K*
4K - 4000K
3K - 3000K
T2 - TYPE 2
T3 - TYPE 3
T4 - TYPE 4
T5 - TYPE 5
BRZ - BRONZE*
CC - CUSTOM
DIM - DIMMABLE
DRIVER*
PC - PHOTOCELL
DMS - DIMMING MOTION SENSOR
SF - SLIPFIT
YK - YOKE
BLANK - WITHOUT
MOUNTING
VOLTAGE COLOUR TEMP. BEAM FINISH DRIVER OPTIONS MOUNTING
AL3 LED320