Download - Request for Quotation Rpn c 101660
-
8/11/2019 Request for Quotation Rpn c 101660
1/163
Vendor No.: Tender No.: RPNC101660M/S RFQ No.:
RFQ Dt. 09.08.2014
Quotation Deadline:04.09.2014
Tel No.
Tel No. SINGLE BID [ ]Fax TWO BID [ ]
Subject:"Annual Rate Contract (ARC) for execution of Mechanical & Civil works
for process modification schemes in Units areas (Part-A) and Offsite
areas(Part-B) of Panipat Naphtha Cracker."
Dear Sirs,
Please find enclosed one set of tender document for the subject work to be
submitted in 'TWO BID'.
An amount of Rs.74,300/-(Rupees Sventy Four Thousand & Three Hundred Only)as
earnest money deposit (EMD) shall be deposited by you through 'demand draft'
in favour of 'Indian Oil Corporation Ltd., Panipat Refinery' payable at'Panipat'.
Tenders without requisite earnest money deposit shall be rejected.
Scanned copy of the DD shall be uploaded along with the Tender. The original
DD shall be submitted / delivered in person or sent by post so as to reach the
Tender Inviting Authority up to stipulated date & time of Bid Submission
without which Tender will be rejected.
The tender shall be uploaded as per instructions given in the tender document.
Physical Bids will not be accepted. Tender documents can be downloaded from
page 1
Letter Inviting Tender
-
8/11/2019 Request for Quotation Rpn c 101660
2/163
the website https://iocletenders.gov.in upto 03.09.2014.
Online bids are to be uploaded with Digital Signature from 27.08.2014 to
03.09.2014 upto 2.30 p.m.
The techno-commercial part (Part-I) shall be opened on 04.09.2014 at 03:00
p.m. or at a later date convenient thereafter. The Price part (Part-II) of
techno-commercially clear bidders shall be opened on a later date, after due
intimation to them.
IOCL takes no responsibility for delay in uploading the Tender in
E-procurement system.
IOCL reserves the right to reject any/all the tenders without assigning any
reason(s) whatsoever thereof.
Thanking you,
Yours faithfully,
For Indian Oil Corporation Limited,
PNC Panipat Refinery,
(K. M. Sharma)
Chief Manager (PNC-Contract Cell)
Ph. No. +91-1802526611/6614
Fax No. +91-0180-2578170
E-mail:[email protected]/[email protected]
page 2
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
3/163
PREAMBLETO
"SCHEDULE OF RATES"
1. The schedule of rates should be read with all other sections of this
tender.
2. The tenderers shall be deemed to have studied the items, specifications and
details of work to be done within the time schedule attached and to have
acquainted himself with the conditions prevailing at site.
3. The quantities shown against various items are only approximate. Anyincrease or decrease in the quantities shall not form the basis of alteration
of the rates quoted and accepted.
4. The owner reserves the rights to extrapolate/ interpolate the rates for
such items of work falling between similar items of lower and higher
magnitude.
5. The works, item wise, shall be measured upon completion and paid for at the
rates quoted and accepted.
6. All the items of work mentioned in the schedule of rates and covered by
this contract shall be carried out as per the drawings, specifications anddirections of the Engineer-in-Charge and shall include all labour, materials,
tools, tackles, plants testing, if any, with contractors testing appliances
etc., required to complete the job.
7. The tenderer shall quote one flat percentagewith respect to all estimated
rates & amounts given in the schedule of rates. This percentage shall be valid
for the rates & amounts of each & every item in the schedule of rates of the
tender.
8.The use of white/erasing fluid is banned for correcting the rates. Wherever
the rates are corrected with white/erasing fluid, the bids will be summarily
rejected.
Digital Signature of tenderer
page 3
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
4/163
Schedule of RatesService Required for Plant: 9065 ,PNCP-Panipat Refinery
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
RFQ ITEM NO.00010Mech. Jobs in Unit Area
00010 CME01001XX
DISMANTLING OF CARBON STEEL/ ALLOYSTEEL PIPING BY HOT WORK
(INSULATED/ UNINSULATED)
Dismantling and removal of above
ground, overhead under ground
(upto depth of 5m) redundant, steam
traced pipelines, insulated
and uninsulated, of carbon steel /
alloy steel by gas cutting or by
grinder from various locations such as
pipe racks, columns, pump
house, vessels, heaters, heat
exchangers, desalter etc. upto ahight of 5 meters including, removal of
insulation material, all on
line instruments, fittings, flanges,
valves, vents, drains, branching
etc.; lowering down the same to ground
level with due care so that
no other piping, equipment#s,
machinery#s etc. is damaged; cutting
into pieces if required; segregating
for reclaiming useful fittings
such as bends, flanges, valves,
instruments etc. by unbolting,
gas cutting, cold cutting etc.;
transporting and stacking the
salvageable useful materials to
workshop / instrument workshop/
store or as per the direction of the
Engineer-in-Charge and shifting
the scrap pipes etc. to scrap yard or
any other location within
refinery premises
and completing the job as per the
instructions of Engineer in-Charge.
Job also includes supplying of all
types of tools & tackles, liftingarrangements, equipment, machineries,
all consumables & labour
page 4
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
5/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
etc. to complete the work in all
respects in a workman like manner
including area preparation, taking
clearance for hot jobs, blinding
and delinding, area cleaning after
completion of work, flushing
wherever required as directed by the
Engineer-in-Charge.
NOTE :1. Proper safety arrangements for
carrying out the job is under
contractor's scope and the same has to
be complied with as
per the directions of the Engineer-
in-Charge.
2. Salvaging of useful fitting from
redundant pipe, if done, will be
paid under separate item.
3. Civil works (excavation & back
filling) for underground
dismantling shall be paid underseparate item from Civil SOR.
NOTE:
For piping beyond 5 Mtr. Elevation,
Above-Ground Piping Rate to be
Escalated by 20%, 30%, 40% (@10%
increment) upto 10 Mtr,
15 Mtr, 20 Mtr. respectively.
00020 CME0100101 100.000 M 11.06 1,106.00
15 mm NB Rs.ELEVEN & Rs.ONE THOUSAND
PAISE SIX ONLY ONE HUNDRED SIX
ONLY
00030 CME0100102 200.000 M 11.06 2,212.00
20 mm NB Rs.ELEVEN & Rs.TWO THOUSAND
PAISE SIX ONLY TWO HUNDRED
TWELVE ONLY
00040 CME0100103 100.000 M 13.82 1,382.00
25 mm NB Rs.THIRTEEN & Rs.ONE THOUSAND
PAISE THREE HUNDRED
EIGHTY-TWO ONLY EIGHTY-TWO ONLY
00050 CME0100104 100.000 M 31.51 3,151.00
40 mm NB Rs.THIRTY-ONE & Rs.THREE
PAISE FIFTY-ONE THOUSAND ONE
ONLY HUNDRED
FIFTY-ONE ONLY
00060 CME0100105 100.000 M 39.40 3,940.0050 mm NB Rs.THIRTY-NINE Rs.THREE
& PAISE FORTY THOUSAND NINE
page 5
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
6/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
ONLY HUNDRED FORTY
ONLY
00070 CME0100106 50.000 M 58.05 2,902.50
80 mm NB Rs.FIFTY-EIGHT Rs.TWO THOUSAND
& PAISE FIVE NINE HUNDRED
ONLY TWO & PAISE
FIFTY ONLY
00080 CME0100107 50.000 M 74.64 3,732.00
100 mm NB Rs.SEVENTY-FOUR Rs.THREE & PAISE THOUSAND SEVEN
SIXTY-FOUR ONLY HUNDRED
THIRTY-TWO ONLY
00090 CME0100108 50.000 M 126.01 6,300.50
150 mm NB Rs.ONE HUNDRED Rs.SIX THOUSAND
TWENTY-SIX & THREE HUNDRED &
PAISE ONE ONLY PAISE FIFTY ONLY
00100 CME0100109 50.000 M 164.04 8,202.00
200 mm NB Rs.ONE HUNDRED Rs.EIGHT
SIXTY-FOUR & THOUSAND TWO
PAISE FOUR ONLY HUNDRED TWO ONLY
00110 CME0100110 100.000 M 220.20 22,020.00250 mm NB Rs.TWO HUNDRED Rs.TWENTY-TWO
TWENTY & PAISE THOUSAND TWENTY
TWENTY ONLY ONLY
00120 CME0100111 100.000 M 261.21 26,121.00
300 mm NB Rs.TWO HUNDRED Rs.TWENTY-SIX
SIXTY-ONE & THOUSAND ONE
PAISE HUNDRED
TWENTY-ONE ONLY TWENTY-ONE ONLY
00130 CME0100112 20.000 M 286.78 5,735.60
350 mm NB Rs.TWO HUNDRED Rs.FIVE
EIGHTY-SIX & THOUSAND SEVEN
PAISE HUNDRED
SEVENTY-EIGHT THIRTY-FIVE &
ONLY PAISE SIXTY ONLY
00140 CME0100113 20.000 M 327.74 6,554.80
400 mm NB Rs.THREE Rs.SIX THOUSAND
HUNDRED FIVE HUNDRED
TWENTY-SEVEN & FIFTY-FOUR &
PAISE PAISE EIGHTY
SEVENTY-FOUR ONLY
ONLY
00150 CME0100114 10.000 M 368.71 3,687.10
450 mm NB Rs.THREE Rs.THREE
HUNDRED THOUSAND SIX
SIXTY-EIGHT & HUNDRED PAISE EIGHTY-SEVEN &
SEVENTY-ONE ONLY PAISE TEN ONLY
page 6
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
7/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
00160 CME0100115 10.000 M 410.32 4,103.20
500 mm NB Rs.FOUR HUNDRED Rs.FOUR
TEN & PAISE THOUSAND ONE
THIRTY-TWO ONLY HUNDRED THREE &
PAISE TWENTY
ONLY
00170 CME0100116 10.000 M 491.61 4,916.10
600 mm NB Rs.FOUR HUNDRED Rs.FOUR
NINETY-ONE & THOUSAND NINEPAISE SIXTY-ONE HUNDRED SIXTEEN
ONLY & PAISE TEN ONLY
00180 CME0100117 10.000 M 641.03 6,410.30
700 mm NB Rs.SIX HUNDRED Rs.SIX THOUSAND
FORTY-ONE & FOUR HUNDRED
PAISE THREE ONLY TEN & PAISE
THIRTY ONLY
00190 CME0100118 1.000 M 686.82 686.82
750 mm NB Rs.SIX HUNDRED Rs.SIX HUNDRED
EIGHTY-SIX & EIGHTY-SIX &
PAISE PAISE
EIGHTY-TWO ONLY EIGHTY-TWO ONLY00200 CME0100119 1.000 M 732.61 732.61
800 mm NB Rs.SEVEN Rs.SEVEN
HUNDRED HUNDRED
THIRTY-TWO & THIRTY-TWO &
PAISE SIXTY-ONE PAISE SIXTY-ONE
ONLY ONLY
00210 CME0100120 1.000 M 824.18 824.18
900 mm NB Rs.EIGHT Rs.EIGHT
HUNDRED HUNDRED
TWENTY-FOUR & TWENTY-FOUR &
PAISE EIGHTEEN PAISE EIGHTEEN
ONLY ONLY
00220 CME0100121 1.000 M 915.76 915.761000 mm NB Rs.NINE HUNDRED Rs.NINE HUNDRED
FIFTEEN & PAISE FIFTEEN & PAISE
SEVENTY-SIX ONLY SEVENTY-SIX ONLY
00230 CME0100122 1.000 M 1,007.34 1,007.34
1100 mm NB Rs.ONE THOUSAND Rs.ONE THOUSAND
SEVEN & PAISE SEVEN & PAISE
THIRTY-FOUR ONLY THIRTY-FOUR ONLY
00240 CME0100123 1.000 M 1,098.91 1,098.91
1200 mm NB Rs.ONE THOUSAND Rs.ONE THOUSAND
NINETY-EIGHT & NINETY-EIGHT &
PAISE PAISE
NINETY-ONE ONLY NINETY-ONE ONLY
page 7
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
8/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
00250 CME01005XX
WRAPPING & COATING OF VESSELS/
UNDERGROUND PIPING ETC.
Providing wrapping & coating as
per the specifications including
supply of all materials, tools &
tackles, etc. The detailed
specification for wrapping &
coating is as under:1. The surface preparation of pipes
shall be done by grit/shot blast
cleaning to Swedish
standard SA-2.
2. The grit/ shot blasting operation
shall be carried out in the day
time. Blast cleaning
operation shall not be under taken in
humid condition.
3. Only approved quality grit/ shot
shall be used for grit/ shot
blasting. The grit/ shot used shallbe dry and free form any other
impurities.
4. The grit/ shot blasted surface shall
have a shining and near white
metal appearances.
5. After grit/ shot blast cleaning, the
surface shall be dry brushed to
remove deposits.
6. The grit/ shot blasted surface
should be inspected by quality
control/ Inspection agency of
owner/ contractor.
COATING SYSTEM
Following steps shall be followed:
1. Application of one coat of primer.
2. Application of one coat of coal tar
enamel.
3. Wrapping fibre glass.
4. Application of 2nd coat of coal tar
enamel.
5. Wrapping of kraft paper/ coal tar
impregnated outer wrap.
PRIMING
1. Single coat of coal tar primer shall
be applied manually withgood quality brushes. Following
precautions shall be taken
page 8
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
9/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
during application of primer.
2. Primer drum shall be inspected for
manufacturing date batch No etc.
3. Primer drum shall be rotated before
opening for proper mixing.
4. Primer shall be applied within 12
hrs. of completion of sand
blasting.
5. Primer shall be applied evenly allalong the pipe surface.
6. Any holiday or bare pipe left over
during priming shall be
primed again.
7. Primer will not be applied during
rainy/ moist weather.
8. After application of primer and
before drying, adequate precaution
shall be taken to avoid contact of
dust/ sand etc. with primed
surface.
9. Normal primer requires 1 hr. timefor proper drying and
becomes dead after 24 hrs. of its
application.
10. Coating shall be completed within
these limits failingwhich dead
primer shall be cleaned and fresh
primer shall be applied again.
COATING AND WRAPPING
i) When the priming coat has dried and
the surface of the dprimed
pipe has been cleaned preferably by
clean white rags to remove
the settled dust just preceding of the
coating operation. The pipe
shall be coated with hot application of
one coat of coal tar enamel
to give a minimum thickness of 2.5 mm
and to be securely bonded
to the primer.
ii) The coal tar enamel shall be cut
into lumps preferably at the
storage place upon a clean platform
with side boards and due
care must always be exercised by the
contractor to keep the brokenenamel absolutely free form dirt,
grass, water or any other foreign
page 9
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
10/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
material up to the time when enamel is
charged into the melting
kettle.
iii) The coal tar enamel shall be
slowly heated on reduced fire and
maintained to the even temperature
recommended for application
i.e. 220 deg. C to 240 deg. C.
iv) Constant stirring shall benecessary in continuously operating
melting kettles.
v) Melting kettle should have proper
insulation.
vi) The melting kettle should be of
movable type i.e. wheel mounted
and have towing arrangement.
vii) The melting kettle should be kept
near the work site. However,
in no case the molten enamel shall be
carried in bucket for more
than 50 meter distance.Viii) During pouring of molten enamel,
fine wire mesh filter shall be
used to avoid the flow of impurity/
dirt/ sand.
ix) During temporary interruption of
the work the temperature in the
kettle not shall be reduced by at least
50 deg. C below the normal
specified temperature.
x) Any enamel heated to temperature in
excess of the maximum
allowable temperature shall be rejected
and suitably disposed off
by the contractor.
xi) Melting kettles/ pots shall always
be maintained clean and in
good working order and must be cleaned
whenever deposits form
on the heating surface.
xii) A uniform thickness of 2.5 mm of
enamel shall be applied to the
surface of the primed pipe.
xiii) A uniform thickness of 2.5 mm of
enamel shall be applied to the
surface of the primed pipe.xiv) The enamel shall be then
reinforced by a spirally wrapped fibre
page 10
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
11/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
glass wrap, pulled and embedded into
the hot coating with an over
lapping of edges of the wrap not less
than 1/2 and not more than 1
xv) This will be followed by another
coat of hot coal tar enamel
application with a uniform thickness of
1.5 mm followed by kraft
paper/ coal tar impregnated fibre glasscovering.
xvi The coating and wrapping must be
absolutely free of wrinkles
in the wrappers, pinholes, bubbles,
holidays voids thin spots or
foreign matter.
xvii Rols of wrapping material shall
not be kept along the right of
way and shall be stored properly and
brought to site.
xviii) Wrapping material shall be so
hauled and handled as to preventinjury to the packages.
xix) No packages shall be handled with
hooks or thrown form trucks.
xx) Any such material which shows
evidence of deterioration due
to weather or any other cause, shall be
rejected.
COATING THICKNESS
Minimum thickness of first should be
2.5 mm whereas total thickness
should be approx. 4.5 mm.
TESTING
Following testing shall be undertaken:
I) Physical Inspection: All the coated
surface shall be visually
inspected and all the wrinkles,
bubbles, lack of overlap etc. shall
be marked for repair.
Ii) Sound Test: The coating adhesion
can be checked easily with small
wooden hammer by soft striking on
coated surface. Change in sound
indicates coating defects and same can
be checked there by peel test
iii) Peel Test:The field bond test forcoal tar enamel adhesion shall
be preformed at 50-80F normal
page 11
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
12/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
operating temperature of steel piping
If the coating temperature is above 80
deg F or below 50 deg. F, pour
cold or hot water over the test area to
adjust the enamel temperature
cuts through the coating about 4 inch
in length and 3/4 inch apart.
With the edge of knife blade cut under
the enamel strip at one endand loosen the enamel form the pipe the
full width of the strip for
about a 1/2 place the knife blade under
the loosened end and apply
a slow, steady pull upward on enamel
strip.
iv) If the peel length exceeds 1/8 the
test is a failure and two
additional tests shall be made at two
different locations on the same
section. If the additional tests are
satisfactory then the sectionshall be approved. If the either
additional test fails, the pipe
section shall be rejected.
SPECIFICATION OF COALTAR PRIMER
The primer consists of processed coal
tar pitcha nd refined coal
tar oil suitably blended with a solvent
without pigment or inert
filler or other substances (to be
applied cold) for brushing or
spraying as liquid coat to the clean
surface piping as provided for
in AWWA specification C-203-73. The
primer should have no
tendency to settle down in the
container and when applied without
producing bubbles, becomes dry and hard
to touch within specified
time ensuring and effective bond
between the metal pipe surface
and the enamel coating. The main
characteristics of the coal
tap primer should be as follows:
1. Drying time to touch dry, at normal
humidity at 32 deg. C is lessthan 1 hr.
2. Max Boiling point of solvent 25 deg.
page 12
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
13/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
C.
3. Penetration of residue at 25 deg. C.
4. Softening point of residue
(ASTM-D-36) 104 deg. C.
5. Flash point of (ASTM 1310) 37 deg. C.
6. Pigment
7. Solvent
Benzol solvent or highly toxic
volatile solvents excluded.Reputed Indian Suplier (for Coal
Tar Enamel & Coal Tar
Primer).
i) M/s Shalimar Tar Products, Calcutta.
ii) M/s Lloyd Insulation (India) Ltd.,
New Delhi.
2. SPECIFICATION FOR COAL TAR ENAMEL
The enamel shall be a WWA coal
enamel type-I conforming to
AWWA standard, AWWA C-203-86.
The enamel be composed of a
specially processedcoal tar typeblended with an inert mineral filter,
properly graded, cleaned, dust
free and without asphalt of either
petroleum or nature base, to be
applied to a recommended temperature.
The main characteristics
of the enamel shall be as follows:
S. No. Test
Enamel Type - 1
Min Max.
1. Softening Point, ASTM-D-36
140 deg.C 116 deg. C
2. Filter(ash) ASTMD-71
25% 35%
3. Fineness fillet through
90%
Through 200 mesh. ASTM-D-54G
3. SPECIFICATION OF FIBRE GLASS INNER
WRAP
The fibre glass inner wrap of high
tensile long monofilament,
chemically inert glass fibre in jack
straces patterns mat
reinforced by longitudinal continuousstands of glass fibre yarn
blended with insoluble inert resinous
page 13
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
14/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
binder compatiable with hot
coal tar enamel and should conform to
the following specifications:
Tensile Strength (transverse) Kg/cm
0.50 + 0.10
Weight
41gm/sq.m
Reputed Indian Supplier for Fibre Glass
paper andKraft Paper:
i) M/s united paper product,
Saharanpur, U.P.
ii) M/s FGP limited New Delhi.
iii) Specification of Kraft paper.
The craft paper shall be smooth
bituminised to be supplied in rolls.
The average weight of a composite
bituminised kraft paper shall
be a minimum of 120 gms/sq. Meter. A
negative weight tolerance
upto 5% of the composite weight may bepermitted at the discretion
to the owner, (bituminised kraft paper
with average weight less
than 120 gms/sq. Meter in not
acceptable). The bituminised kraft
paper shall be composed of two layers
of kraft paper shall be
composed of two layers of kraft paper
and each weighing not less
than 45 gm/sq. Meter and laminated with
a layer of bitumen
approachments weight 50 gms/sq. M to
have a proper bond
between the two layr of paper. He
bituminised kraft paper for
field application shall be able to
resist penetration.
Specific Gravity at 25 deg. C ASTM D-71
1.4
1.6 Penetration, ASTM-D-5
10 a) At 25 deg. C 100 gms. Weight 5
secs. High temperature
test at 71 deg.C
1/32 (Sag O AWWA C-203. Sec. 2.8.9
Low temperature test at 23 deg. C(Cracking), AWWAC-203 sec. 2.8.10
Peel Test, AWWAC-203 sec. 2.8.11 No
page 14
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
15/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
peeling
Electrical Resistance test at 17000
Volts and low amperage
(1.5 mm thickness)
Other Requirements (For wrapping
& coating)
1. Third party Inspection certificate
for all materials by EIL/ DNV/
LRIS/ MECON or providing IOCL approvedmanufacturers test
certificate shall be in contractors
scope.
2. Holiday testing machine shall be
arranged & provided by
contractor.
3. Vendor to submit transportation and
Handling procedure T avoid
wrapping and coating of pipes.
4. Vendor to submit & Get quality
assurance plan (QAP) for
wrappingand coating approved by owner/
Inspector.
5. The wrapping & coating surface
must have machine finish in
workmanship.
Vessel/ Tank etc sqm
Note:
Additional payment for earth excavation
and wrapping coating will be
made extra for underground piping.
00260 CME0100505 1.000 M 181.69 181.69
50 mm NB Rs.ONE HUNDRED Rs.ONE HUNDRED
EIGHTY-ONE & EIGHTY-ONE &
PAISE PAISE
SIXTY-NINE ONLY SIXTY-NINE ONLY
00270 CME0100506 25.000 M 267.76 6,694.00
80 mm NB Rs.TWO HUNDRED Rs.SIX THOUSAND
SIXTY-SEVEN & SIX HUNDRED
PAISE NINETY-FOUR ONLY
SEVENTY-SIX ONLY
00280 CME0100507 100.000 M 344.24 34,424.00
100 mm NB Rs.THREE Rs.THIRTY-FOUR
HUNDRED THOUSAND FOUR
FORTY-FOUR & HUNDRED
PAISE TWENTY-FOUR ONLYTWENTY-FOUR ONLY
page 15
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
16/163
-
8/11/2019 Request for Quotation Rpn c 101660
17/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
ONE HUNDRED ONE HUNDRED
FORTY-TWO ONLY FORTY-TWO ONLY
00390 CME0100518 1.000 M 2,294.99 2,294.99
750 mm NB Rs.TWO THOUSAND Rs.TWO THOUSAND
TWO HUNDRED TWO HUNDRED
NINETY-FOUR & NINETY-FOUR &
PAISE PAISE
NINETY-NINE ONLY NINETY-NINE ONLY
00400 CME0100519 1.000 M 2,448.00 2,448.00800 mm NB Rs.TWO THOUSAND Rs.TWO THOUSAND
FOUR HUNDRED FOUR HUNDRED
FORTY-EIGHT ONLY FORTY-EIGHT ONLY
00410 CME0100520 1.000 M 2,754.00 2,754.00
900 mm NB Rs.TWO THOUSAND Rs.TWO THOUSAND
SEVEN HUNDRED SEVEN HUNDRED
FIFTY-FOUR ONLY FIFTY-FOUR ONLY
00420 CME0100521 1.000 M 3,059.99 3,059.99
1000 mm NB Rs.THREE Rs.THREE
THOUSAND THOUSAND
FIFTY-NINE & FIFTY-NINE &
PAISE PAISENINETY-NINE ONLY NINETY-NINE ONLY
00430 CME0100522 1.000 M 3,364.19 3,364.19
1100 mm NB Rs.THREE Rs.THREE
THOUSAND THREE THOUSAND THREE
HUNDRED HUNDRED
SIXTY-FOUR & SIXTY-FOUR &
PAISE NINETEEN PAISE NINETEEN
ONLY ONLY
00440 CME0100523 1.000 M 3,671.39 3,671.39
1200 mm NB Rs.THREE Rs.THREE
THOUSAND SIX THOUSAND SIX
HUNDRED HUNDRED
SEVENTY-ONE & SEVENTY-ONE &
PAISE PAISE
THIRTY-NINE ONLY THIRTY-NINE ONLY
00450 CME02008XX
CARBON STEEL PIPING JOINTS FOR
HYDROCARBON SERVICE
(WITH WELDING ELECTRODE E-6010 / E-7018)
Transportation of all piping items from
owner's stroage points to work
site and/ or pre-fabrication yard and
to site after pre-febrication;
cutting, grinding, edge preparation ofpipes and fittings, like
flanges, elbows, tees, reducers etc. to
page 17
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
18/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
match the mating edges
of different thickness; fit-up,
bending, welding using approved
welding electrods as per owners quality
requirements etc.
as per codes/specifications, drawing
etc., threading, laying and
alignment of pipes at ground level i.e.
upto a height of 5 meterson sleepers, pipe racks etc. or upto 5
meters depth in
trenches; connecting with equipments,
nozzles, steam traps,
strainers, orifice assemblies
(including tapping upto first block
valve), spray nozzles rotameters;
tapping for instrument
connections like pressure gauges,
thermowells, sample connections,
vents, drains etc. including fixing of
all types of SW valves,gaskets, nuts & bolts, all inline
instruments, elbows, tees, flanges,
reducers, full coupling or half
coupling, earthing strip wherever
required; welding prefabricated shoes &
supports (including
alignment) as per the drawings,
including preparation small bore
isometric upto 1.5 inch NB,
specifications, codes etc. and as
per the instructions of the
Engineer-in-Charge to his entire
satisfaction including supplying of all
types of tools & tackles,
lifting arrangements, equipment,
machineries, all consumables &
labour etc. to complete the work in all
respects in a workman
like manner including area preparation
for hot jobs, area cleaning
after completion of work, flushing
wherever required, cleaning
of pipes externally off all foreign
materials like weld beads, clamps
fixtures etc. used in fabrication asdirected by the
Engineer-in-Charge.
page 18
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
19/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
NOTE :
Proper safety arrangements for carrying
out the job is under
contractor's scope and the same has to
be complied with as
per the directions of the Engineer-
in-Charge.
NOTE:
For piping beyond 5 Mtr. Elevation,Above/below ground piping rate to be
Escalated by 20%, 30%, 40% (@10%
increment) upto 10 Mtr,
15 Mtr, 20 Mtr. respectively.
NOTE:
For piping where TIG welding is used
for root run only, the rates to be
escalated by 15% &
where TIG welding is used for entire
joints the rates to be escalated by 20%.
NOTE:
Payment of tapping points will also bemade extra on joint basis, as the
measurement is on
joint basis.
00460 CME0200802 50.000 EA 88.49 4,424.50
15 mm NB, Schedule upto 80 Rs.EIGHTY-EIGHT Rs.FOUR
& PAISE THOUSAND FOUR
FORTY-NINE ONLY HUNDRED
TWENTY-FOUR &
PAISE FIFTY ONLY
00470 CME0200803 50.000 EA 88.49 4,424.50
15 mm NB, Schedule above 80 but upto 160 Rs.EIGHTY-EIGHT Rs.FOUR
& PAISE THOUSAND FOUR
FORTY-NINE ONLY HUNDRED
TWENTY-FOUR &
PAISE FIFTY ONLY
00480 CME0200804 50.000 EA 127.82 6,391.00
15 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.SIX THOUSAND
TWENTY-SEVEN & THREE HUNDRED
PAISE NINETY-ONE ONLY
EIGHTY-TWO ONLY
00490 CME0200806 50.000 EA 88.49 4,424.50
20 mm NB, Schedule upto 80 Rs.EIGHTY-EIGHT Rs.FOUR
& PAISE THOUSAND FOUR
FORTY-NINE ONLY HUNDRED
TWENTY-FOUR & PAISE FIFTY ONLY
page 19
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
20/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
00500 CME0200807 50.000 EA 111.48 5,574.00
20 mm NB, Schedule above 80 but upto 160 Rs.ONE HUNDRED Rs.FIVE
ELEVEN & PAISE THOUSAND FIVE
FORTY-EIGHT ONLY HUNDRED
SEVENTY-FOUR
ONLY
00510 CME0200808 50.000 EA 127.82 6,391.00
20 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.SIX THOUSAND
TWENTY-SEVEN & THREE HUNDRED PAISE NINETY-ONE ONLY
EIGHTY-TWO ONLY
00520 CME0200810 20.000 EA 110.59 2,211.80
25 mm NB, Schedule upto 80 Rs.ONE HUNDRED Rs.TWO THOUSAND
TEN & PAISE TWO HUNDRED
FIFTY-NINE ONLY ELEVEN & PAISE
EIGHTY ONLY
00530 CME0200811 20.000 EA 148.28 2,965.60
25 mm NB, Schedule above 80 but upto 160 Rs.ONE HUNDRED Rs.TWO THOUSAND
FORTY-EIGHT & NINE HUNDRED
PAISE SIXTY-FIVE &
TWENTY-EIGHT PAISE SIXTY ONLY ONLY
00540 CME0200812 20.000 EA 172.07 3,441.40
25 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.THREE
SEVENTY-TWO & THOUSAND FOUR
PAISE SEVEN ONLY HUNDRED
FORTY-ONE &
PAISE FORTY ONLY
00550 CME0200814 20.000 EA 252.11 5,042.20
40 mm NB, Schedule upto 80 Rs.TWO HUNDRED Rs.FIVE
FIFTY-TWO & THOUSAND
PAISE ELEVEN FORTY-TWO &
ONLY PAISE TWENTY
ONLY
00560 CME0200815 10.000 EA 289.06 2,890.60
40 mm NB, Schedule above 80 but upto 160 Rs.TWO HUNDRED Rs.TWO THOUSAND
EIGHTY-NINE & EIGHT HUNDRED
PAISE SIX ONLY NINETY & PAISE
SIXTY ONLY
00570 CME0200816 1.000 EA 311.36 311.36
40 mm NB, Schedule XX Strong Rs.THREE Rs.THREE
HUNDRED ELEVEN HUNDRED ELEVEN
& PAISE & PAISE
THIRTY-SIX ONLY THIRTY-SIX ONLY
00580 CME0200817 25.000 EA 250.17 6,254.25
50 mm NB, Schedule upto 40 Rs.TWO HUNDRED Rs.SIX THOUSAND FIFTY & PAISE TWO HUNDRED
SEVENTEEN ONLY FIFTY-FOUR &
page 20
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
21/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
PAISE
TWENTY-FIVE ONLY
00590 CME0200818 150.000 EA 315.16 47,274.00
50 mm NB, Schedule more than 40 but Rs.THREE Rs.FORTY-SEVEN
upto 80 HUNDRED FIFTEEN THOUSAND TWO
& PAISE SIXTEEN HUNDRED
ONLY SEVENTY-FOUR
ONLY
00600 CME0200819 50.000 EA 361.35 18,067.5050 mm NB, Schedule above 80 but upto 160 Rs.THREE Rs.EIGHTEEN
HUNDRED THOUSAND
SIXTY-ONE & SIXTY-SEVEN &
PAISE PAISE FIFTY ONLY
THIRTY-FIVE ONLY
00610 CME0200820 1.000 EA 435.02 435.02
50 mm NB, Schedule XX Strong Rs.FOUR HUNDRED Rs.FOUR HUNDRED
THIRTY-FIVE & THIRTY-FIVE &
PAISE TWO ONLY PAISE TWO ONLY
00620 CME0200821 30.000 EA 464.41 13,932.30
80 mm NB, Schedule upto 40 Rs.FOUR HUNDRED Rs.THIRTEEN
SIXTY-FOUR & THOUSAND NINEPAISE FORTY-ONE HUNDRED
ONLY THIRTY-TWO &
PAISE THIRTY
ONLY
00630 CME0200822 25.000 EA 532.47 13,311.75
80 mm NB, Schedule more than 40 but Rs.FIVE HUNDRED Rs.THIRTEEN
upto 80 THIRTY-TWO & THOUSAND THREE
PAISE HUNDRED ELEVEN
FORTY-SEVEN ONLY & PAISE
SEVENTY-FIVE
ONLY
00640 CME0200823 5.000 EA 641.03 3,205.15
80 mm NB, Schedule above 80 but upto 160 Rs.SIX HUNDRED Rs.THREE
FORTY-ONE & THOUSAND TWO
PAISE THREE ONLY HUNDRED FIVE &
PAISE FIFTEEN
ONLY
00650 CME0200824 1.000 EA 1,621.81 1,621.81
80 mm NB, Schedule XX Strong Rs.ONE THOUSAND Rs.ONE THOUSAND
SIX HUNDRED SIX HUNDRED
TWENTY-ONE & TWENTY-ONE &
PAISE PAISE
EIGHTY-ONE ONLY EIGHTY-ONE ONLY
00660 CME0200825 50.000 EA 597.10 29,855.00
100 mm NB, Schedule upto 40 Rs.FIVE HUNDRED Rs.TWENTY-NINE NINETY-SEVEN & THOUSAND EIGHT
PAISE TEN ONLY HUNDRED
page 21
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
22/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
FIFTY-FIVE ONLY
00670 CME0200826 10.000 EA 684.61 6,846.10
100 mm NB, Schedule more than 40 but Rs.SIX HUNDRED Rs.SIX THOUSAND
upto 80 EIGHTY-FOUR & EIGHT HUNDRED
PAISE SIXTY-ONE FORTY-SIX &
ONLY PAISE TEN ONLY
00680 CME0200827 1.000 EA 1,834.87 1,834.87
100 mm NB, Schedule above 80 but upto Rs.ONE THOUSAND Rs.ONE THOUSAND
160 EIGHT HUNDRED EIGHT HUNDRED THIRTY-FOUR & THIRTY-FOUR &
PAISE PAISE
EIGHTY-SEVEN EIGHTY-SEVEN
ONLY ONLY
00690 CME0200829 30.000 EA 1,008.04 30,241.20
150 mm NB, Schedule upto 40 Rs.ONE THOUSAND Rs.THIRTY
EIGHT & PAISE THOUSAND TWO
FOUR ONLY HUNDRED
FORTY-ONE &
PAISE TWENTY
ONLY
00700 CME0200830 10.000 EA 1,085.81 10,858.10150 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.TEN THOUSAND
upto 80 EIGHTY-FIVE & EIGHT HUNDRED
PAISE FIFTY-EIGHT &
EIGHTY-ONE ONLY PAISE TEN ONLY
00710 CME0200831 1.000 EA 2,701.74 2,701.74
150 mm NB, Schedule above 80 but upto Rs.TWO THOUSAND Rs.TWO THOUSAND
120 SEVEN HUNDRED SEVEN HUNDRED
ONE & PAISE ONE & PAISE
SEVENTY-FOUR SEVENTY-FOUR
ONLY ONLY
00720 CME0200834 20.000 EA 1,312.32 26,246.40
200 mm NB, Schedule above 20 but upto 40 Rs.ONE THOUSAND Rs.TWENTY-SIX
THREE HUNDRED THOUSAND TWO
TWELVE & PAISE HUNDRED
THIRTY-TWO ONLY FORTY-SIX &
PAISE FORTY ONLY
00730 CME0200835 5.000 EA 1,579.87 7,899.35
200 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.SEVEN
upto 80 FIVE HUNDRED THOUSAND EIGHT
SEVENTY-NINE & HUNDRED
PAISE NINETY-NINE &
EIGHTY-SEVEN PAISE
ONLY THIRTY-FIVE ONLY
00740 CME0200836 1.000 EA 3,517.24 3,517.24
200 mm NB, Schedule above 80 but upto Rs.THREE Rs.THREE120 THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
page 22
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
23/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
SEVENTEEN & SEVENTEEN &
PAISE PAISE
TWENTY-FOUR ONLY TWENTY-FOUR ONLY
00750 CME0200839 20.000 EA 1,761.62 35,232.40
250 mm NB, Schedule above 20 but upto 40 Rs.ONE THOUSAND Rs.THIRTY-FIVE
SEVEN HUNDRED THOUSAND TWO
SIXTY-ONE & HUNDRED
PAISE SIXTY-TWO THIRTY-TWO &
ONLY PAISE FORTY ONLY00760 CME0200840 10.000 EA 1,968.89 19,688.90
250 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.NINETEEN
upto 80 NINE HUNDRED THOUSAND SIX
SIXTY-EIGHT & HUNDRED
PAISE EIGHTY-EIGHT &
EIGHTY-NINE ONLY PAISE NINETY
ONLY
00770 CME0200841 1.000 EA 5,701.35 5,701.35
250 mm NB, Schedule above 80 but upto Rs.FIVE Rs.FIVE
120 THOUSAND SEVEN THOUSAND SEVEN
HUNDRED ONE & HUNDRED ONE &
PAISE PAISETHIRTY-FIVE ONLY THIRTY-FIVE ONLY
00780 CME0200843 1.000 EA 1,800.83 1,800.83
300 mm NB, Schedule upto 20 Rs.ONE THOUSAND Rs.ONE THOUSAND
EIGHT HUNDRED & EIGHT HUNDRED &
PAISE PAISE
EIGHTY-THREE EIGHTY-THREE
ONLY ONLY
00790 CME0200844 20.000 EA 2,089.68 41,793.60
300 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.FORTY-ONE
EIGHTY-NINE & THOUSAND SEVEN
PAISE HUNDRED
SIXTY-EIGHT ONLY NINETY-THREE &
PAISE SIXTY ONLY
00800 CME0200845 1.000 EA 2,335.55 2,335.55
300 mm NB, Schedule more than 40 but Rs.TWO THOUSAND Rs.TWO THOUSAND
upto 80 THREE HUNDRED THREE HUNDRED
THIRTY-FIVE & THIRTY-FIVE &
PAISE PAISE
FIFTY-FIVE ONLY FIFTY-FIVE ONLY
00810 CME0200846 1.000 EA 7,825.51 7,825.51
300 mm NB, Schedule above 80 but upto Rs.SEVEN Rs.SEVEN
120 THOUSAND EIGHT THOUSAND EIGHT
HUNDRED HUNDRED
TWENTY-FIVE & TWENTY-FIVE &
PAISE FIFTY-ONE PAISE FIFTY-ONE ONLY ONLY
page 23
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
24/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
00820 CME0200848 5.000 EA 1,977.08 9,885.40
350 mm NB, Schedule upto 20 Rs.ONE THOUSAND Rs.NINE
NINE HUNDRED THOUSAND EIGHT
SEVENTY-SEVEN & HUNDRED
PAISE EIGHT ONLY EIGHTY-FIVE &
PAISE FORTY ONLY
00830 CME0200849 5.000 EA 2,294.20 11,471.00
350 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.ELEVEN
TWO HUNDRED THOUSAND FOUR NINETY-FOUR & HUNDRED
PAISE TWENTY SEVENTY-ONE ONLY
ONLY
00840 CME0200850 1.000 EA 5,708.49 5,708.49
350 mm NB, Schedule more than 40 but Rs.FIVE Rs.FIVE
upto 80 THOUSAND SEVEN THOUSAND SEVEN
HUNDRED EIGHT & HUNDRED EIGHT &
PAISE PAISE
FORTY-NINE ONLY FORTY-NINE ONLY
00850 CME0200853 1.000 EA 2,259.52 2,259.52
400 mm NB, Schedule upto 20 Rs.TWO THOUSAND Rs.TWO THOUSAND
TWO HUNDRED TWO HUNDRED FIFTY-NINE & FIFTY-NINE &
PAISE FIFTY-TWO PAISE FIFTY-TWO
ONLY ONLY
00860 CME0200854 1.000 EA 2,621.94 2,621.94
400 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.TWO THOUSAND
SIX HUNDRED SIX HUNDRED
TWENTY-ONE & TWENTY-ONE &
PAISE PAISE
NINETY-FOUR ONLY NINETY-FOUR ONLY
00870 CME0200855 1.000 EA 6,523.98 6,523.98
400 mm NB, Schedule more than 40 but Rs.SIX THOUSAND Rs.SIX THOUSAND
upto 80 FIVE HUNDRED FIVE HUNDRED
TWENTY-THREE & TWENTY-THREE &
PAISE PAISE
NINETY-EIGHT NINETY-EIGHT
ONLY ONLY
00880 CME0200858 1.000 EA 2,541.96 2,541.96
450 mm NB, Schedule upto 20 Rs.TWO THOUSAND Rs.TWO THOUSAND
FIVE HUNDRED FIVE HUNDRED
FORTY-ONE & FORTY-ONE &
PAISE PAISE
NINETY-SIX ONLY NINETY-SIX ONLY
00890 CME0200859 1.000 EA 2,949.69 2,949.69
450 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.TWO THOUSAND
NINE HUNDRED NINE HUNDRED FORTY-NINE & FORTY-NINE &
PAISE PAISE
page 24
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
25/163
-
8/11/2019 Request for Quotation Rpn c 101660
26/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
PAISE NINE ONLY PAISE NINE ONLY
00970 CME0200867 1.000 EA 4,259.78 4,259.78
700 mm NB, Schedule upto 20 Rs.FOUR Rs.FOUR
THOUSAND TWO THOUSAND TWO
HUNDRED HUNDRED
FIFTY-NINE & FIFTY-NINE &
PAISE PAISE
SEVENTY-EIGHT SEVENTY-EIGHT
ONLY ONLY00980 CME0200868 1.000 EA 4,588.40 4,588.40
700 mm NB, Schedule above 20 but upto 40 Rs.FOUR Rs.FOUR
THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
EIGHTY-EIGHT & EIGHTY-EIGHT &
PAISE FORTY ONLY PAISE FORTY ONLY
00990 CME0200869 1.000 EA 5,128.26 5,128.26
700 mm NB, 7.92 thick Rs.FIVE Rs.FIVE
THOUSAND ONE THOUSAND ONE
HUNDRED HUNDRED
TWENTY-EIGHT & TWENTY-EIGHT &
PAISE PAISETWENTY-SIX ONLY TWENTY-SIX ONLY
01000 CME0200870 1.000 EA 4,564.05 4,564.05
750 mm NB, Schedule upto 20 Rs.FOUR Rs.FOUR
THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
SIXTY-FOUR & SIXTY-FOUR &
PAISE FIVE ONLY PAISE FIVE ONLY
01010 CME0200871 1.000 EA 4,916.14 4,916.14
750 mm NB, Schedule above 20 but upto 40 Rs.FOUR Rs.FOUR
THOUSAND NINE THOUSAND NINE
HUNDRED SIXTEEN HUNDRED SIXTEEN
& PAISE & PAISE
FOURTEEN ONLY FOURTEEN ONLY
01020 CME0200872 1.000 EA 5,494.56 5,494.56
750 mm NB, 7.92 thick Rs.FIVE Rs.FIVE
THOUSAND FOUR THOUSAND FOUR
HUNDRED HUNDRED
NINETY-FOUR & NINETY-FOUR &
PAISE FIFTY-SIX PAISE FIFTY-SIX
ONLY ONLY
01030 CME0200873 1.000 EA 4,868.32 4,868.32
800 mm NB, Schedule upto 20 Rs.FOUR Rs.FOUR
THOUSAND EIGHT THOUSAND EIGHT
HUNDRED HUNDRED
SIXTY-EIGHT & SIXTY-EIGHT & PAISE PAISE
THIRTY-TWO ONLY THIRTY-TWO ONLY
page 26
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
27/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
01040 CME0200874 1.000 EA 5,860.87 5,860.87
800 mm NB, Schedule above 20 but upto 40 Rs.FIVE Rs.FIVE
THOUSAND EIGHT THOUSAND EIGHT
HUNDRED SIXTY & HUNDRED SIXTY &
PAISE PAISE
EIGHTY-SEVEN EIGHTY-SEVEN
ONLY ONLY
01050 CME0200875 1.000 EA 5,860.87 5,860.87
800 mm NB, 7.92 thick Rs.FIVE Rs.FIVE THOUSAND EIGHT THOUSAND EIGHT
HUNDRED SIXTY & HUNDRED SIXTY &
PAISE PAISE
EIGHTY-SEVEN EIGHTY-SEVEN
ONLY ONLY
01060 CME0200876 1.000 EA 5,476.86 5,476.86
900 mm NB, Schedule upto 20 Rs.FIVE Rs.FIVE
THOUSAND FOUR THOUSAND FOUR
HUNDRED HUNDRED
SEVENTY-SIX & SEVENTY-SIX &
PAISE PAISE
EIGHTY-SIX ONLY EIGHTY-SIX ONLY01070 CME0200877 1.000 EA 14,678.96 14,678.96
900 mm NB, Schedule above 20 but upto 40 Rs.FOURTEEN Rs.FOURTEEN
THOUSAND SIX THOUSAND SIX
HUNDRED HUNDRED
SEVENTY-EIGHT & SEVENTY-EIGHT &
PAISE PAISE
NINETY-SIX ONLY NINETY-SIX ONLY
01080 CME0200878 1.000 EA 6,593.48 6,593.48
900 mm NB, 7.92 thick Rs.SIX THOUSAND Rs.SIX THOUSAND
FIVE HUNDRED FIVE HUNDRED
NINETY-THREE & NINETY-THREE &
PAISE PAISE
FORTY-EIGHT ONLY FORTY-EIGHT ONLY
01090 CME0200879 1.000 EA 6,085.40 6,085.40
1000 mm NB, upto 7.92 mm WT Rs.SIX THOUSAND Rs.SIX THOUSAND
EIGHTY-FIVE & EIGHTY-FIVE &
PAISE FORTY ONLY PAISE FORTY ONLY
01100 CME0200880 1.000 EA 7,326.09 7,326.09
1000 mm NB, above 7.92 mm WT but upto Rs.SEVEN Rs.SEVEN
12.7 mm WT THOUSAND THREE THOUSAND THREE
HUNDRED HUNDRED
TWENTY-SIX & TWENTY-SIX &
PAISE NINE ONLY PAISE NINE ONLY
01110 CME0200881 1.000 EA 21,214.34 21,214.34
1000 mm NB, above 12.7 mm WT but upto Rs.TWENTY-ONE Rs.TWENTY-ONE19.1 mm WT THOUSAND TWO THOUSAND TWO
HUNDRED HUNDRED
page 27
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
28/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
FOURTEEN & FOURTEEN &
PAISE PAISE
THIRTY-FOUR ONLY THIRTY-FOUR ONLY
01120 CME0200882 1.000 EA 6,693.94 6,693.94
1100 mm NB, upto 7.92 mm WT Rs.SIX THOUSAND Rs.SIX THOUSAND
SIX HUNDRED SIX HUNDRED
NINETY-THREE & NINETY-THREE &
PAISE PAISE
NINETY-FOUR ONLY NINETY-FOUR ONLY01130 CME0200883 1.000 EA 8,058.69 8,058.69
1100 mm NB, above 7.92 mm WT but upto Rs.EIGHT Rs.EIGHT
12.7 mm WT THOUSAND THOUSAND
FIFTY-EIGHT & FIFTY-EIGHT &
PAISE PAISE
SIXTY-NINE ONLY SIXTY-NINE ONLY
01140 CME0200884 1.000 EA 23,335.78 23,335.78
1100 mm NB, above 12.7 mm WT but upto Rs.TWENTY-THREE Rs.TWENTY-THREE
19.1 mm WT THOUSAND THREE THOUSAND THREE
HUNDRED HUNDRED
THIRTY-FIVE & THIRTY-FIVE &
PAISE PAISE SEVENTY-EIGHT SEVENTY-EIGHT
ONLY ONLY
01150 CME0200885 1.000 EA 7,302.49 7,302.49
1200 mm NB, upto 7.92 mm WT Rs.SEVEN Rs.SEVEN
THOUSAND THREE THOUSAND THREE
HUNDRED TWO & HUNDRED TWO &
PAISE PAISE
FORTY-NINE ONLY FORTY-NINE ONLY
01160 CME0200886 1.000 EA 8,791.30 8,791.30
1200 mm NB, above 7.92 mm WT but upto Rs.EIGHT Rs.EIGHT
12.7 mm WT THOUSAND SEVEN THOUSAND SEVEN
HUNDRED HUNDRED
NINETY-ONE & NINETY-ONE &
PAISE THIRTY PAISE THIRTY
ONLY ONLY
01170 CME0200887 1.000 EA 25,457.21 25,457.21
1200 mm NB, above 12.7 mm WT but upto Rs.TWENTY-FIVE Rs.TWENTY-FIVE
19.1 mm WT THOUSAND FOUR THOUSAND FOUR
HUNDRED HUNDRED
FIFTY-SEVEN & FIFTY-SEVEN &
PAISE PAISE
TWENTY-ONE ONLY TWENTY-ONE ONLY
01180 CME0200888 1.000 EA 7,911.03 7,911.03
1300 mm NB, upto 7.92 mm WT Rs.SEVEN Rs.SEVEN
THOUSAND NINE THOUSAND NINE HUNDRED ELEVEN HUNDRED ELEVEN
& PAISE THREE & PAISE THREE
page 28
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
29/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
ONLY ONLY
01190 CME0200889 1.000 EA 9,523.91 9,523.91
1300 mm NB, above 7.92 mm WT but upto Rs.NINE Rs.NINE
12.7 mm WT THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
TWENTY-THREE & TWENTY-THREE &
PAISE PAISE
NINETY-ONE ONLY NINETY-ONE ONLY
01200 CME0200890 1.000 EA 27,578.64 27,578.641300 mm NB, above 12.7 mm WT but upto Rs.TWENTY-SEVEN Rs.TWENTY-SEVEN
19.1 mm WT THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
SEVENTY-EIGHT & SEVENTY-EIGHT &
PAISE PAISE
SIXTY-FOUR ONLY SIXTY-FOUR ONLY
01210 CME0200891 1.000 EA 8,519.57 8,519.57
1400 mm NB, upto 7.92 mm WT Rs.EIGHT Rs.EIGHT
THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
NINETEEN & NINETEEN &
PAISE PAISEFIFTY-SEVEN ONLY FIFTY-SEVEN ONLY
01220 CME0200892 1.000 EA 10,256.52 10,256.52
1400 mm NB, above 7.92 mm WT but upto Rs.TEN THOUSAND Rs.TEN THOUSAND
12.7 mm WT TWO HUNDRED TWO HUNDRED
FIFTY-SIX & FIFTY-SIX &
PAISE FIFTY-TWO PAISE FIFTY-TWO
ONLY ONLY
01230 CME0200893 1.000 EA 29,700.08 29,700.08
1400 mm NB, above 12.7 mm WT but upto Rs.TWENTY-NINE Rs.TWENTY-NINE
19.1 mm WT THOUSAND SEVEN THOUSAND SEVEN
HUNDRED & PAISE HUNDRED & PAISE
EIGHT ONLY EIGHT ONLY
01240 CME0200894 1.000 EA 9,128.11 9,128.111500 mm NB, upto 7.92 mm WT Rs.NINE Rs.NINE
THOUSAND ONE THOUSAND ONE
HUNDRED HUNDRED
TWENTY-EIGHT & TWENTY-EIGHT &
PAISE ELEVEN PAISE ELEVEN
ONLY ONLY
01250 CME0200895 1.000 EA 10,989.13 10,989.13
1500 mm NB, above 7.92 mm WT but upto Rs.TEN THOUSAND Rs.TEN THOUSAND
12.7 mm WT NINE HUNDRED NINE HUNDRED
EIGHTY-NINE & EIGHTY-NINE &
PAISE THIRTEEN PAISE THIRTEEN
ONLY ONLY01260 CME0200896 1.000 EA 31,821.51 31,821.51
1500 mm NB, above 12.7 mm WT but upto Rs.THIRTY-ONE Rs.THIRTY-ONE
page 29
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
30/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
19.1 mm WT THOUSAND EIGHT THOUSAND EIGHT
HUNDRED HUNDRED
TWENTY-ONE & TWENTY-ONE &
PAISE FIFTY-ONE PAISE FIFTY-ONE
ONLY ONLY
01270 CME0200897 1.000 EA 9,736.65 9,736.65
1600 mm NB, upto 7.92 mm WT Rs.NINE Rs.NINE
THOUSAND SEVEN THOUSAND SEVEN
HUNDRED HUNDRED THIRTY-SIX & THIRTY-SIX &
PAISE PAISE
SIXTY-FIVE ONLY SIXTY-FIVE ONLY
01280 CME0200898 1.000 EA 11,721.74 11,721.74
1600 mm NB, above 7.92 mm WT but upto Rs.ELEVEN Rs.ELEVEN
12.7 mm WT THOUSAND SEVEN THOUSAND SEVEN
HUNDRED HUNDRED
TWENTY-ONE & TWENTY-ONE &
PAISE PAISE
SEVENTY-FOUR SEVENTY-FOUR
ONLY ONLY
01290 CME0200899 1.000 EA 33,942.95 33,942.951600 mm NB, above 12.7 mm WT but upto Rs.THIRTY-THREE Rs.THIRTY-THREE
19.1 mm WT THOUSAND NINE THOUSAND NINE
HUNDRED HUNDRED
FORTY-TWO & FORTY-TWO &
PAISE PAISE
NINETY-FIVE ONLY NINETY-FIVE ONLY
01300 CME02009XX
PROVISION OF REINFORCEMENT PAD (WITH
WELDING ELECTRODE
E-6010 / E-7018)
Transportation from owner's stroage
points to work site and/ or
pre-fabrication yard and to site after
pre-febrication; cutting,
grinding, edge preparation as per the
instructions of the
Engineer-in-Charge to his entire
satisfaction including supplying
of all types of tools & tackles,
lifting arrangements, equipment,
machineries, all consumables & labour
etc. to complete the work
in all respects in a workman like
manner including area preparationfor hot jobs, area cleaning after
completion of work, pneumatic
page 30
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
31/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
testing, cleaning of pipes externally
off all foreign materials like
weld beads, clamps fixtures etc. used
in fabrication as directed
by the Engineer-in-Charge.
NOTE :
Proper safety arrangements for carrying
out the job is under
contractor's scope and the same has tobe complied with as
per the directions of the Engineer-
in-Charge.
01310 CME0200901 10.000 EA 375.25 3,752.50
Branch size 2 inch Rs.THREE Rs.THREE
HUNDRED THOUSAND SEVEN
SEVENTY-FIVE & HUNDRED
PAISE FIFTY-TWO &
TWENTY-FIVE ONLY PAISE FIFTY ONLY
01320 CME0200902 10.000 EA 696.62 6,966.20
Branch size 3 inch Rs.SIX HUNDRED Rs.SIX THOUSAND
NINETY-SIX & NINE HUNDREDPAISE SIXTY-TWO SIXTY-SIX &
ONLY PAISE TWENTY
ONLY
01330 CME0200903 10.000 EA 895.65 8,956.50
Branch size 4 inch Rs.EIGHT Rs.EIGHT
HUNDRED THOUSAND NINE
NINETY-FIVE & HUNDRED
PAISE FIFTY-SIX &
SIXTY-FIVE ONLY PAISE FIFTY ONLY
01340 CME0200904 2.000 EA 1,512.07 3,024.14
Branch size 6 inch Rs.ONE THOUSAND Rs.THREE
FIVE HUNDRED THOUSAND
TWELVE & PAISE TWENTY-FOUR &
SEVEN ONLY PAISE FOURTEEN
ONLY
01350 CME0200905 2.000 EA 1,968.47 3,936.94
Branch size 8 inch Rs.ONE THOUSAND Rs.THREE
NINE HUNDRED THOUSAND NINE
SIXTY-EIGHT & HUNDRED
PAISE THIRTY-SIX &
FORTY-SEVEN ONLY PAISE
NINETY-FOUR ONLY
01360 CME0200906 2.000 EA 2,642.43 5,284.86
Branch size 10 inch Rs.TWO THOUSAND Rs.FIVE
SIX HUNDRED THOUSAND TWO FORTY-TWO & HUNDRED
PAISE EIGHTY-FOUR &
page 31
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
32/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
FORTY-THREE ONLY PAISE
EIGHTY-SIX ONLY
01370 CME0200907 1.000 EA 3,134.53 3,134.53
Branch size 12 inch Rs.THREE Rs.THREE
THOUSAND ONE THOUSAND ONE
HUNDRED HUNDRED
THIRTY-FOUR & THIRTY-FOUR &
PAISE PAISE
FIFTY-THREE ONLY FIFTY-THREE ONLY01380 CME0200908 1.000 EA 3,441.30 3,441.30
Branch size 14 inch Rs.THREE Rs.THREE
THOUSAND FOUR THOUSAND FOUR
HUNDRED HUNDRED
FORTY-ONE & FORTY-ONE &
PAISE THIRTY PAISE THIRTY
ONLY ONLY
01390 CME0200909 1.000 EA 3,932.92 3,932.92
Branch size 16 inch Rs.THREE Rs.THREE
THOUSAND NINE THOUSAND NINE
HUNDRED HUNDRED
THIRTY-TWO & THIRTY-TWO & PAISE PAISE
NINETY-TWO ONLY NINETY-TWO ONLY
01400 CME0200910 1.000 EA 4,424.53 4,424.53
Branch size 18 inch Rs.FOUR Rs.FOUR
THOUSAND FOUR THOUSAND FOUR
HUNDRED HUNDRED
TWENTY-FOUR & TWENTY-FOUR &
PAISE PAISE
FIFTY-THREE ONLY FIFTY-THREE ONLY
01410 CME02010XX
EXTRA FOR IBR GRADE CS PIPING JOINTS
Extra for IBR grade carbon steel piping
joints. For IBR piping jobs,
the scope of contractor shall be
liasoning with IBR authorities
including approval of drawings /
documents from IBR authorities
and also getting the final approval of
the job from IBR authorities
including payment of any fee or charges
to IBR authorities for
this purpose.
01420 CME0201002 10.000 EA 17.70 177.00
15 mm NB, Schedule upto 80 Rs.SEVENTEEN & Rs.ONE HUNDRED PAISE SEVENTY SEVENTY-SEVEN
ONLY ONLY
page 32
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
33/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
01430 CME0201003 10.000 EA 17.70 177.00
15 mm NB, Schedule above 80 but upto 160 Rs.SEVENTEEN & Rs.ONE HUNDRED
PAISE SEVENTY SEVENTY-SEVEN
ONLY ONLY
01440 CME0201005 10.000 EA 17.70 177.00
20 mm NB, Schedule upto 80 Rs.SEVENTEEN & Rs.ONE HUNDRED
PAISE SEVENTY SEVENTY-SEVEN
ONLY ONLY
01450 CME0201006 10.000 EA 22.30 223.0020 mm NB, Schedule above 80 but upto 160 Rs.TWENTY-TWO & Rs.TWO HUNDRED
PAISE THIRTY TWENTY-THREE
ONLY ONLY
01460 CME0201008 10.000 EA 22.12 221.20
25 mm NB, Schedule upto 80 Rs.TWENTY-TWO & Rs.TWO HUNDRED
PAISE TWELVE TWENTY-ONE &
ONLY PAISE TWENTY
ONLY
01470 CME0201009 1.000 EA 29.66 29.66
25 mm NB, Schedule above 80 but upto 160 Rs.TWENTY-NINE Rs.TWENTY-NINE
& PAISE & PAISE
SIXTY-SIX ONLY SIXTY-SIX ONLY01480 CME0201011 10.000 EA 50.42 504.20
40 mm NB, Schedule upto 80 Rs.FIFTY & Rs.FIVE HUNDRED
PAISE FORTY-TWO FOUR & PAISE
ONLY TWENTY ONLY
01490 CME0201012 1.000 EA 57.81 57.81
40 mm NB, Schedule above 80 but upto 160 Rs.FIFTY-SEVEN Rs.FIFTY-SEVEN
& PAISE & PAISE
EIGHTY-ONE ONLY EIGHTY-ONE ONLY
01500 CME0201014 10.000 EA 63.03 630.30
50 mm NB, Schedule more than 40 but Rs.SIXTY-THREE Rs.SIX HUNDRED
upto 80 & PAISE THREE THIRTY & PAISE
ONLY THIRTY ONLY
01510 CME0201015 1.000 EA 72.27 72.2750 mm NB, Schedule above 80 but upto 160 Rs.SEVENTY-TWO Rs.SEVENTY-TWO
& PAISE & PAISE
TWENTY-SEVEN TWENTY-SEVEN
ONLY ONLY
01520 CME0201016 10.000 EA 92.88 928.80
80 mm NB, Schedule upto 40 Rs.NINETY-TWO & Rs.NINE HUNDRED
PAISE TWENTY-EIGHT &
EIGHTY-EIGHT PAISE EIGHTY
ONLY ONLY
01530 CME0201017 1.000 EA 106.49 106.49
80 mm NB, Schedule more than 40 but Rs.ONE HUNDRED Rs.ONE HUNDRED
upto 80 SIX & PAISE SIX & PAISEFORTY-NINE ONLY FORTY-NINE ONLY
page 33
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
34/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
01540 CME0201018 1.000 EA 128.21 128.21
80 mm NB, Schedule above 80 but upto 160 Rs.ONE HUNDRED Rs.ONE HUNDRED
TWENTY-EIGHT & TWENTY-EIGHT &
PAISE PAISE
TWENTY-ONE ONLY TWENTY-ONE ONLY
01550 CME0201019 10.000 EA 119.42 1,194.20
100 mm NB, Schedule upto 40 Rs.ONE HUNDRED Rs.ONE THOUSAND
NINETEEN & ONE HUNDRED
PAISE FORTY-TWO NINETY-FOUR & ONLY PAISE TWENTY
ONLY
01560 CME0201020 1.000 EA 136.92 136.92
100 mm NB, Schedule more than 40 but Rs.ONE HUNDRED Rs.ONE HUNDRED
upto 80 THIRTY-SIX & THIRTY-SIX &
PAISE PAISE
NINETY-TWO ONLY NINETY-TWO ONLY
01570 CME0201021 1.000 EA 366.97 366.97
100 mm NB, Schedule above 80 but upto Rs.THREE Rs.THREE
160 HUNDRED HUNDRED
SIXTY-SIX & SIXTY-SIX &
PAISE PAISE NINETY-SEVEN NINETY-SEVEN
ONLY ONLY
01580 CME0201022 10.000 EA 201.61 2,016.10
150 mm NB, Schedule upto 40 Rs.TWO HUNDRED Rs.TWO THOUSAND
ONE & PAISE SIXTEEN & PAISE
SIXTY-ONE ONLY TEN ONLY
01590 CME0201023 1.000 EA 217.16 217.16
150 mm NB, Schedule more than 40 but Rs.TWO HUNDRED Rs.TWO HUNDRED
upto 80 SEVENTEEN & SEVENTEEN &
PAISE SIXTEEN PAISE SIXTEEN
ONLY ONLY
01600 CME0201024 1.000 EA 540.35 540.35
150 mm NB, Schedule above 80 but upto Rs.FIVE HUNDRED Rs.FIVE HUNDRED
120 FORTY & PAISE FORTY & PAISE
THIRTY-FIVE ONLY THIRTY-FIVE ONLY
01610 CME0201027 20.000 EA 262.46 5,249.20
200 mm NB, Schedule above 20 but upto 40 Rs.TWO HUNDRED Rs.FIVE
SIXTY-TWO & THOUSAND TWO
PAISE FORTY-SIX HUNDRED
ONLY FORTY-NINE &
PAISE TWENTY
ONLY
01620 CME0201028 1.000 EA 315.97 315.97
200 mm NB, Schedule more than 40 but Rs.THREE Rs.THREE
upto 80 HUNDRED FIFTEEN HUNDRED FIFTEEN & PAISE & PAISE
NINETY-SEVEN NINETY-SEVEN
page 34
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
35/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
ONLY ONLY
01630 CME0201029 1.000 EA 703.45 703.45
200 mm NB, Schedule above 80 but upto Rs.SEVEN Rs.SEVEN
120 HUNDRED THREE & HUNDRED THREE &
PAISE PAISE
FORTY-FIVE ONLY FORTY-FIVE ONLY
01640 CME0201032 1.000 EA 352.32 352.32
250 mm NB, Schedule above 20 but upto 40 Rs.THREE Rs.THREE
HUNDRED HUNDRED FIFTY-TWO & FIFTY-TWO &
PAISE PAISE
THIRTY-TWO ONLY THIRTY-TWO ONLY
01650 CME0201033 1.000 EA 393.78 393.78
250 mm NB, Schedule more than 40 but Rs.THREE Rs.THREE
upto 80 HUNDRED HUNDRED
NINETY-THREE & NINETY-THREE &
PAISE PAISE
SEVENTY-EIGHT SEVENTY-EIGHT
ONLY ONLY
01660 CME0201034 1.000 EA 1,140.27 1,140.27
250 mm NB, Schedule above 80 but upto Rs.ONE THOUSAND Rs.ONE THOUSAND120 ONE HUNDRED ONE HUNDRED
FORTY & PAISE FORTY & PAISE
TWENTY-SEVEN TWENTY-SEVEN
ONLY ONLY
01670 CME0201037 1.000 EA 417.94 417.94
300 mm NB, Schedule above 20 but upto 40 Rs.FOUR HUNDRED Rs.FOUR HUNDRED
SEVENTEEN & SEVENTEEN &
PAISE PAISE
NINETY-FOUR ONLY NINETY-FOUR ONLY
01680 CME0201038 1.000 EA 467.11 467.11
300 mm NB, Schedule more than 40 but Rs.FOUR HUNDRED Rs.FOUR HUNDRED
upto 80 SIXTY-SEVEN & SIXTY-SEVEN &
PAISE ELEVEN PAISE ELEVEN
ONLY ONLY
01690 CME0201039 1.000 EA 1,565.10 1,565.10
300 mm NB, Schedule above 80 but upto Rs.ONE THOUSAND Rs.ONE THOUSAND
120 FIVE HUNDRED FIVE HUNDRED
SIXTY-FIVE & SIXTY-FIVE &
PAISE TEN ONLY PAISE TEN ONLY
01700 CME02020XX
Transportation of all piping items from
owner's stroage points to work site
and/ or pre-
fabrication yard and to site afterpre-febrication; cutting, grinding,
edge preparation of pipes
page 35
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
36/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
and fittings, like flanges, elbows,
tees, reducers etc. to match the mating
edges of different
thickness; fit-up, bending, welding
using approved welding electrods as per
owners quality
requirements etc. as per
codes/specifications, drawing etc.,
threading, laying, erection andalignment of pipes at ground level i.e.
upto a height of 5 meters on sleepers,
pipe racks etc. or
upto 5 meters depth in trenches;
connecting with equipments, nozzles,
steam traps,
strainers, orifice assemblies
(including tapping upto first block
valve), spray nozzles
rotameters; tapping for instrument
connections like pressure gauges,
thermowells, sampleconnections, vents, drains etc.
including fixing of all types of SW
valves, gaskets, nuts & bolts,
all inline instruments, elbows, tees,
flanges, "reducers, full coupling or
half coupling, earthing
strip wherever required; welding
prefabricated shoes & supports
(including alignment) as per
the drawings, including preparation
small bore isometric upto 1.5 inch NB,
specifications,
codes etc. and as per the instructions
of the Engineer-in-Charge to his entire
satisfaction
including supplying of all types of
tools & tackles, lifting arrangements,
equipment,
machineries, all consumables & labour
etc. to complete the work in all
respects in a workman
like manner including area preparation
for hot jobs, area cleaning after
completion of work,
flushing wherever required, cleaning ofpipes externally off all foreign
materials like weld
page 36
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
37/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
beads, clamps fixtures etc. used in
fabrication as directed by the
Engineer-in-Charge.
NOTE :
Proper safety arrangements for carrying
out the job is under contractor's scope
and the same
has to be complied with as per the
directions of the Engineer- in-Charge.""NOTE:
For piping beyond 5 Mtr. Elevation,
above/ below-ground piping rate to be
escalated by 20%,
30%, 40% (@10% increment) upto 10 Mtr,
15 Mtr, 20 Mtr. respectively.
NOTE:
For piping where TIG welding is used
for root run only, the rates to be
escalated by 15% &
where TIG welding is used for entire
joints the rates to be escalated by 20%.NOTE:
Payment of tapping points will also be
made extra on joint basis, as the
measurement is on
joint basis.
01710 CME0202002 10.000 EA 80.42 804.20
15 mm NB, Schedule upto 80 Rs.EIGHTY & Rs.EIGHT
PAISE FORTY-TWO HUNDRED FOUR &
ONLY PAISE TWENTY
ONLY
01720 CME0202003 10.000 EA 80.42 804.20
15 mm NB, Schedule above 80 but upto 160 Rs.EIGHTY & Rs.EIGHT
PAISE FORTY-TWO HUNDRED FOUR &
ONLY PAISE TWENTY
ONLY
01730 CME0202004 10.000 EA 118.52 1,185.20
15 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.ONE THOUSAND
EIGHTEEN & ONE HUNDRED
PAISE FIFTY-TWO EIGHTY-FIVE &
ONLY PAISE TWENTY
ONLY
01740 CME0202006 10.000 EA 80.42 804.20
20 mm NB, Schedule upto 80 Rs.EIGHTY & Rs.EIGHT
PAISE FORTY-TWO HUNDRED FOUR &
ONLY PAISE TWENTY ONLY
page 37
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
38/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
01750 CME0202007 10.000 EA 103.00 1,030.00
20 mm NB, Schedule above 80 but upto 160 Rs.ONE HUNDRED Rs.ONE THOUSAND
THREE ONLY THIRTY ONLY
01760 CME0202008 10.000 EA 118.52 1,185.20
20 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.ONE THOUSAND
EIGHTEEN & ONE HUNDRED
PAISE FIFTY-TWO EIGHTY-FIVE &
ONLY PAISE TWENTY
ONLY01770 CME0202010 20.000 EA 100.51 2,010.20
25 mm NB, Schedule upto 80 Rs.ONE HUNDRED Rs.TWO THOUSAND
& PAISE TEN & PAISE
FIFTY-ONE ONLY TWENTY ONLY
01780 CME0202011 25.000 EA 137.18 3,429.50
25 mm NB, Schedule above 80 but upto 160 Rs.ONE HUNDRED Rs.THREE
THIRTY-SEVEN & THOUSAND FOUR
PAISE EIGHTEEN HUNDRED
ONLY TWENTY-NINE &
PAISE FIFTY ONLY
01790 CME0202012 10.000 EA 160.85 1,608.50
25 mm NB, Schedule XX Strong Rs.ONE HUNDRED Rs.ONE THOUSAND SIXTY & PAISE SIX HUNDRED
EIGHTY-FIVE ONLY EIGHT & PAISE
FIFTY ONLY
01800 CME0202013 20.000 EA 181.87 3,637.40
40 mm NB, Schedule upto 40 Rs.ONE HUNDRED Rs.THREE
EIGHTY-ONE & THOUSAND SIX
PAISE HUNDRED
EIGHTY-SEVEN THIRTY-SEVEN &
ONLY PAISE FORTY ONLY
01810 CME0202014 20.000 EA 232.94 4,658.80
40 mm NB, Schedule upto 80 Rs.TWO HUNDRED Rs.FOUR
THIRTY-TWO & THOUSAND SIX
PAISE HUNDRED
NINETY-FOUR ONLY FIFTY-EIGHT &
PAISE EIGHTY
ONLY
01820 CME0202015 5.000 EA 268.04 1,340.20
40 mm NB, Schedule above 80 but upto 160 Rs.TWO HUNDRED Rs.ONE THOUSAND
SIXTY-EIGHT & THREE HUNDRED
PAISE FOUR ONLY FORTY & PAISE
TWENTY ONLY
01830 CME0202017 20.000 EA 227.36 4,547.20
50 mm NB, Schedule upto 40 Rs.TWO HUNDRED Rs.FOUR
TWENTY-SEVEN & THOUSAND FIVE
PAISE HUNDREDTHIRTY-SIX ONLY FORTY-SEVEN &
PAISE TWENTY
page 38
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
39/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
ONLY
01840 CME0202018 50.000 EA 291.20 14,560.00
50 mm NB, Schedule more than 40 but Rs.TWO HUNDRED Rs.FOURTEEN
upto 80 NINETY-ONE & THOUSAND FIVE
PAISE TWENTY HUNDRED SIXTY
ONLY ONLY
01850 CME0202019 10.000 EA 335.08 3,350.80
50 mm NB, Schedule above 80 but upto 160 Rs.THREE Rs.THREE
HUNDRED THOUSAND THREE THIRTY-FIVE & HUNDRED FIFTY &
PAISE EIGHT ONLY PAISE EIGHTY
ONLY
01860 CME0202021 30.000 EA 429.10 12,873.00
80 mm NB, Schedule upto 40 Rs.FOUR HUNDRED Rs.TWELVE
TWENTY-NINE & THOUSAND EIGHT
PAISE TEN ONLY HUNDRED
SEVENTY-THREE
ONLY
01870 CME0202022 20.000 EA 493.75 9,875.00
80 mm NB, Schedule more than 40 but Rs.FOUR HUNDRED Rs.NINE
upto 80 NINETY-THREE & THOUSAND EIGHT PAISE HUNDRED
SEVENTY-FIVE SEVENTY-FIVE
ONLY ONLY
01880 CME0202025 20.000 EA 551.70 11,034.00
100 mm NB, Schedule upto 40 Rs.FIVE HUNDRED Rs.ELEVEN
FIFTY-ONE & THOUSAND
PAISE SEVENTY THIRTY-FOUR ONLY
ONLY
01890 CME0202026 5.000 EA 634.83 3,174.15
100 mm NB, Schedule more than 40 but Rs.SIX HUNDRED Rs.THREE
upto 80 THIRTY-FOUR & THOUSAND ONE
PAISE HUNDRED
EIGHTY-THREE SEVENTY-FOUR &
ONLY PAISE FIFTEEN
ONLY
01900 CME0202029 20.000 EA 934.74 18,694.80
150 mm NB, Schedule upto 40 Rs.NINE HUNDRED Rs.EIGHTEEN
THIRTY-FOUR & THOUSAND SIX
PAISE HUNDRED
SEVENTY-FOUR NINETY-FOUR &
ONLY PAISE EIGHTY
ONLY
01910 CME0202030 1.000 EA 1,015.01 1,015.01
150 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.ONE THOUSAND
upto 80 FIFTEEN & PAISE FIFTEEN & PAISE ONE ONLY ONE ONLY
page 39
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
40/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
01920 CME0202034 10.000 EA 1,216.89 12,168.90
200 mm NB, Schedule above 20 but upto 40 Rs.ONE THOUSAND Rs.TWELVE
TWO HUNDRED THOUSAND ONE
SIXTEEN & PAISE HUNDRED
EIGHTY-NINE ONLY SIXTY-EIGHT &
PAISE NINETY
ONLY
01930 CME0202035 1.000 EA 1,478.61 1,478.61
200 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.ONE THOUSANDupto 80 FOUR HUNDRED FOUR HUNDRED
SEVENTY-EIGHT & SEVENTY-EIGHT &
PAISE SIXTY-ONE PAISE SIXTY-ONE
ONLY ONLY
01940 CME0202039 10.000 EA 1,646.75 16,467.50
250 mm NB, Schedule above 20 but upto 40 Rs.ONE THOUSAND Rs.SIXTEEN
SIX HUNDRED THOUSAND FOUR
FORTY-SIX & HUNDRED
PAISE SIXTY-SEVEN &
SEVENTY-FIVE PAISE FIFTY ONLY
ONLY
01950 CME0202040 1.000 EA 1,842.70 1,842.70250 mm NB, Schedule more than 40 but Rs.ONE THOUSAND Rs.ONE THOUSAND
upto 80 EIGHT HUNDRED EIGHT HUNDRED
FORTY-TWO & FORTY-TWO &
PAISE SEVENTY PAISE SEVENTY
ONLY ONLY
01960 CME0202044 10.000 EA 1,953.43 19,534.30
300 mm NB, Schedule above 20 but upto 40 Rs.ONE THOUSAND Rs.NINETEEN
NINE HUNDRED THOUSAND FIVE
FIFTY-THREE & HUNDRED
PAISE THIRTY-FOUR &
FORTY-THREE ONLY PAISE THIRTY
ONLY
01970 CME0202045 1.000 EA 2,185.87 2,185.87300 mm NB, Schedule more than 40 but Rs.TWO THOUSAND Rs.TWO THOUSAND
upto 80 ONE HUNDRED ONE HUNDRED
EIGHTY-FIVE & EIGHTY-FIVE &
PAISE PAISE
EIGHTY-SEVEN EIGHTY-SEVEN
ONLY ONLY
01980 CME0202049 1.000 EA 2,144.61 2,144.61
350 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.TWO THOUSAND
ONE HUNDRED ONE HUNDRED
FORTY-FOUR & FORTY-FOUR &
PAISE SIXTY-ONE PAISE SIXTY-ONE
ONLY ONLY01990 CME0202050 1.000 EA 5,519.60 5,519.60
350 mm NB, schedule more than 40 but Rs.FIVE Rs.FIVE
page 40
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
41/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
upto 80 THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
NINETEEN & NINETEEN &
PAISE SIXTY ONLY PAISE SIXTY ONLY
02000 CME0202054 1.000 EA 2,450.98 2,450.98
400 mm NB, Schedule above 20 but upto 40 Rs.TWO THOUSAND Rs.TWO THOUSAND
FOUR HUNDRED FOUR HUNDRED
FIFTY & PAISE FIFTY & PAISE
NINETY-EIGHT NINETY-EIGHT ONLY ONLY
02010 CME0202062 1.000 EA 3,068.55 3,068.55
500 mm NB, Schedule above 20 but upto 40 Rs.THREE Rs.THREE
THOUSAND THOUSAND
SIXTY-EIGHT & SIXTY-EIGHT &
PAISE PAISE
FIFTY-FIVE ONLY FIFTY-FIVE ONLY
02020 CME0202065 1.000 EA 3,676.47 3,676.47
600 mm NB, Schedule above 20 but upto 40 Rs.THREE Rs.THREE
THOUSAND SIX THOUSAND SIX
HUNDRED HUNDRED
SEVENTY-SIX & SEVENTY-SIX & PAISE PAISE
FORTY-SEVEN ONLY FORTY-SEVEN ONLY
02030 CME0202070 1.000 EA 4,232.18 4,232.18
750 mm NB, Schedule upto 20 Rs.FOUR Rs.FOUR
THOUSAND TWO THOUSAND TWO
HUNDRED HUNDRED
THIRTY-TWO & THIRTY-TWO &
PAISE EIGHTEEN PAISE EIGHTEEN
ONLY ONLY
02040 CME0202071 1.000 EA 4,595.59 4,595.59
750 mm NB, Schedule above 20 but upto 40 Rs.FOUR Rs.FOUR
THOUSAND FIVE THOUSAND FIVE
HUNDRED HUNDRED
NINETY-FIVE & NINETY-FIVE &
PAISE PAISE
FIFTY-NINE ONLY FIFTY-NINE ONLY
02050 CME0202074 1.000 EA 4,901.96 4,901.96
800 mm NB, Schedule above 20 but upto 40 Rs.FOUR Rs.FOUR
THOUSAND NINE THOUSAND NINE
HUNDRED ONE & HUNDRED ONE &
PAISE PAISE
NINETY-SIX ONLY NINETY-SIX ONLY
02060 CME0202077 1.000 EA 14,193.26 14,193.26
800 mm NB, Schedule above 20 but upto 40 Rs.FOURTEEN Rs.FOURTEEN
THOUSAND ONE THOUSAND ONE HUNDRED HUNDRED
NINETY-THREE & NINETY-THREE &
page 41
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
42/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
PAISE PAISE
TWENTY-SIX ONLY TWENTY-SIX ONLY
02070 CME0202080 1.000 EA 6,856.56 6,856.56
1000 mm NB, above 7.92 mm WT but upto Rs.SIX THOUSAND Rs.SIX THOUSAND
12.7 mm WT EIGHT HUNDRED EIGHT HUNDRED
FIFTY-SIX & FIFTY-SIX &
PAISE FIFTY-SIX PAISE FIFTY-SIX
ONLY ONLY
02080 CME04003XX
STAINLESS STEEL PIPING (GR. SS 300)
JOINTS
Transportation of all piping items from
owner's stroage points to work site
and/ or pre-
fabrication yard and to site after
pre-febrication; cutting, grinding,
edge preparation of pipes
and fittings, like flanges, elbows,
tees, reducers etc. to match the mating
edges of differentthickness; fit-up, bending, welding
using approved welding electrods as per
owners quality
requirements etc. as per
codes/specifications, drawing etc.,
threading, laying, erection and
alignment of pipes at ground level i.e.
upto a height of 5 meters on sleepers,
pipe racks etc. or
upto 5 meters depth in trenches;
anchoring wherever required, connecting
with equipments,
nozzles, steam traps, strainers,
orifice assemblies (including tapping
upto first block valve),
spray nozzles rotameters; tapping for
instrument connections like pressure
gauges,
thermowells, sample connections, vents,
drains etc. including fixing of all
types of SW valves,
gaskets, nuts & bolts, all inline
instruments, elbows, tees, flanges,
"reducers, full coupling or half
coupling, earthing strip whereverrequired; welding
prefabricated shoes and supports
page 42
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
43/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
(including alignment) as per the
drawings, including
preparation of small bore isometric
upto 1.5 inch NB, specifications, codes
etc. and as per the
instructions of the Engineer-in-Charge
to his entire satisfaction including
supplying of all
types of tools & tackles, liftingarrangements, equipment, machineries,
all consumables &
labour etc. to complete the work in all
respects in a workman like manner
including area
preparation for hot jobs, area cleaning
after completion of work, flushing
wherever required,
cleaning of pipes externally off all
foreign materials like weld beads,
clamps fixtures etc. used
in fabrication as directed by theEngineer-in-Charge.
NOTE :
Proper safety arrangements for carrying
out the job is under contractor's scope
and the same
has to be complied with as per the
directions of the Engineer- in-Charge."
"NOTE:
For piping beyond 5 Mtr. Elevation,
above/ below-ground piping rate to be
escalated by 20%,
30%, 40% (@10% increment) upto 10 Mtr,
15 Mtr, 20 Mtr. respectively.
NOTE:
For piping where TIG welding is used
for root run only, the rates to be
escalated by 15% &
where TIG welding is used for entire
joints the rates to be escalated by 20%.
NOTE:
Payment of tapping points will also be
made extra on joint basis, as the
measurement is on
joint basis. "
02090 CME0400301 10.000 EA 89.79 897.90"15 mm NB, Schedule upto 40 " Rs.EIGHTY-NINE Rs.EIGHT
& PAISE HUNDRED
page 43
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
44/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
SEVENTY-NINE NINETY-SEVEN &
ONLY PAISE NINETY
ONLY
02100 CME0400302 10.000 EA 156.17 1,561.70
"15 mm NB, Schedule more than 40 but Rs.ONE HUNDRED Rs.ONE THOUSAND
upto 80" FIFTY-SIX & FIVE HUNDRED
PAISE SEVENTEEN SIXTY-ONE &
ONLY PAISE SEVENTY
ONLY02110 CME0400304 10.000 EA 112.21 1,122.10
"20 mm NB, Schedule upto 40 " Rs.ONE HUNDRED Rs.ONE THOUSAND
TWELVE & PAISE ONE HUNDRED
TWENTY-ONE ONLY TWENTY-TWO &
PAISE TEN ONLY
02120 CME0400305 1.000 EA 195.17 195.17
"20 mm NB, Schedule more than 40 but Rs.ONE HUNDRED Rs.ONE HUNDRED
upto 80" NINETY-FIVE & NINETY-FIVE &
PAISE SEVENTEEN PAISE SEVENTEEN
ONLY ONLY
02130 CME0400307 5.000 EA 244.42 1,222.10
"25 mm NB, Schedule upto 40 " Rs.TWO HUNDRED Rs.ONE THOUSAND FORTY-FOUR & TWO HUNDRED
PAISE FORTY-TWO TWENTY-TWO &
ONLY PAISE TEN ONLY
02140 CME0400308 10.000 EA 244.42 2,444.20
"25 mm NB, Schedule more than 40 but Rs.TWO HUNDRED Rs.TWO THOUSAND
upto 80" FORTY-FOUR & FOUR HUNDRED
PAISE FORTY-TWO FORTY-FOUR &
ONLY PAISE TWENTY
ONLY
02150 CME0400310 1.000 EA 353.17 353.17
"40 mm NB, Schedule upto 40 " Rs.THREE Rs.THREE
HUNDRED HUNDRED
FIFTY-THREE & FIFTY-THREE &
PAISE SEVENTEEN PAISE SEVENTEEN
ONLY ONLY
02160 CME0400311 1.000 EA 417.20 417.20
"40 mm NB, Schedule more than 40 but Rs.FOUR HUNDRED Rs.FOUR HUNDRED
upto 80" SEVENTEEN & SEVENTEEN &
PAISE TWENTY PAISE TWENTY
ONLY ONLY
02170 CME0400313 10.000 EA 441.50 4,415.00
"50 mm NB, Schedule upto 40 " Rs.FOUR HUNDRED Rs.FOUR
FORTY-ONE & THOUSAND FOUR
PAISE FIFTY ONLY HUNDRED FIFTEEN
ONLY02180 CME0400314 1.000 EA 521.54 521.54
"50 mm NB, Schedule more than 40 but Rs.FIVE HUNDRED Rs.FIVE HUNDRED
page 44
Tendor No.: RPNC101660
-
8/11/2019 Request for Quotation Rpn c 101660
45/163
______________________________________________________________
O.Lev. Item No Quantity Unit Rate Amount
Sr.No. Item Description
______________________________________________________________
upto 80" TWENTY-ONE & TWENTY-ONE &
PAISE PAISE
FIFTY-FOUR ONLY FIFTY-FOUR ONLY
02190 CME0400316