RH Series Battery Testers
RHSBTP-3-12
Copyright © 2012 All Rights ReservedRedHawk Energy Systems, LLC
RedHawk Energy Systems, LLC10340 Palmer Rd., S.W.
Pataskala, OH 43062
Ph: 740-964-4000 Fx: 740-927-6017
www.redhawkenergy.net
ph: 740-964-4000 www.redhawkenergy.net [email protected]
Avoid Costly DowntimeFor a variety of reasons, batteries lose capacity over time. Determining a battery’s true capacity cannot be accomplished by simply measuring the volt-age of the battery or its cells, even under load conditions. The only reliable method of determining battery capacity is to measure the time the battery takes to discharge into a known load. Our innovative RH Series Portable Battery Testers take the guesswork out of determining the true health of your battery system by providing convenient and automated capacity testing of all battery technologies and voltages from 10-48V.
ApplicationsThese rugged Battery Testers are suitable for use in a variety of commercial and industrial applications with batteries that are in-service as well as batteries at the shop or laboratory.
Battery Testers
Battery Testers
[email protected]: 740-964-4000
Key Features & Benefits
True Capacity MeasurementMeasures the time it takes to discharge the battery in a known load.
Versatile Discharge SettingsSettings to discharge at either a constant current (RH1 & RH2), constant power or constant resistance rate (RH2 only).
Self-PoweredPowered from the battery being tested (requires no connection to AC power grid).
Easy to OperateIntuitive, easy-to-use interface that allows all parameters to be set and stored in memory.
Wide Operating RangeAccommodates a wide range of battery voltages and chemistries.
Continuous ProtectionAllows a temporary battery to be connected to provide protection during testing.
Automatic OperationAutomatically finishes test when battery voltage has reached a preset absolute voltage or % of initial discharge voltage.
FailsafeIn the event of a failure, its normally-closed electro mechanical relay defaults to connect the battery to the charger. The load path is fused to protect the system in the event of a short circuit.
Memory Backup & Data LoggingStores all operating parameters in memory and records the discharge current, battery voltages, charger voltages and heat-sink temperature in internal memory or removable SD card.
RH1 Battery Tester
ph: 740-964-4000 www.redhawkenergy.net [email protected]
Suitable for Many Basic Applications The RH1 Portable Battery Tester features a wide input voltage range (10-48V), constant current discharge mode with user settable termination conditions. The RH1 is packaged in a compact, rugged aluminum case with integrated carrying handle.
Quick Specs
Color RedMeasurement Mode Constant CurrentMeasurement Range 2-50ATermination Conditions Percentage Voltage
Absolute VoltageContactor 75A ContinuousInput Voltage Range 10-48VBattery Voltage Measurement InternalReal Time Clock YesAudio Indicator YesInternal Memory 48KB Internal (>50 hours)External Memory SD CardProgrammable Interface Front Panel
USBCable Gauge (Std.) 6 AWGCable Length (Std.) 4 ftDimensions 10.6”L x 10.6”W x 5.5”HWeight 12.8 lbs
Battery & Charger Connection Cables
RH2 Battery Tester
ph: 740-964-4000 www.redhawkenergy.net [email protected]
Suitable for a Wider Range of Applications The RH2 Portable Battery Tester has all the features of the RH1 with several enhancements noted * in the table below.
Quick Specs
Color BlackMeasurement Modes* Constant Current
Constant PowerConstant Resistance
Measurement Range* 2-50A; 25-500W; 0.2-25OhmTermination Conditions* Percentage Voltage
Absolute Voltage Fixed Time
Contactor* 125A ContinuousInput Voltage Range 10-48VBattery Voltage Measurement* Internal
External (Kelvin)Real Time Clock YesAudio Indicator YesInternal Memory* 96KB Internal (>100 hours)External Memory SD CardProgrammable Interface Front Panel
USBCable Gauge (Std.) 6 AWGCable Length (Std.) 4 ftDimensions 10.6”L x 10.6”W x 5.5”HWeight 13.6 lbs
Connection Ports
About Us
RedHawk Energy Systems, LLC 10340 Palmer Rd., S.W.
Pataskala, OH 43062
ph: 740-964-4000www.redhawkenergy.net
RHSBTP-3-12
Copyright © 2012 All Rights Reserved RedHawk Energy Systems, LLC
Our HistoryRedHawk Energy Systems, LLC was officially formed in 2004 as a manufacturing and value-added subsidiary of the Arthur N. Ulrich Company. Since the early 1980’s, the Arthur N. Ulrich Company has designed and deployed renewable energy systems ranging from a few watts to several kilowatts for hundreds of applications throughout North America.
Solar Power Systems
Wind Turbines
Fuel Cells
Thermoelectric Generators
Hybrids
Battery Systems
Battery Testers
Battery Boxes
Battery Enclosures
Lightning Protection
Engineering Services