S12X Full-Emulator:
Pictures of the Emulator Hardware
S12X CPU-ModuleTARGET CONNECTORS –
ALL S12X SIGNALSAVAILABLE FOR EASY
PROBING
TARGET CONNECTORS –ALL S12X SIGNALS
AVAILABLE FOR EASYPROBING
S12XSIGNALNAMES
MARKINGS
S12X CPU 2nd SILICON –(BLUEFIN2) WITH MANY
S12X BUG FIXES
JUMPERS –TO SELECT
S12X VOLTAGESFROM POD OR
TARGET
LEDINDI-
CATORS
PINSOCKETSFOR THECRYSTALAND PLL-
FILTERANALOGSIGNALS
TO BENEXT TOTHE S12X
CPU
S12X Emulator-Motherboard EMULATOR
MAINFPGA
CONNECTORSTO TRACE
BOARD
2MByteEMULATION
RAM
CONNE-CTORSTO THE
CPU-MODULEAND THETARGET
HIGHSPEED
CONNE-CTORSTO THECPU-
MODULE
Port-Replacement-Unit(PRU) FPGA AND ICs –
RECREATES PORTS A, B, C, D, E & K
8Mbit - UnlimitedHARDWARE
BREAKPOINTS(on the Print-Side)
POWERSUPPLYCONNE-CTOR
PC COMMUN-ICATIONCONNE-CTOR
2MByteSHADOWRAM(on thePrint-Side)
3.3VVOLTAGEREGUL-ATOR
HOUSE-KEEPERCOMMUNICATION
CONTROLLERSYSTEM
New Trace Boardfor the S12X and HCS12
TRACE FPGAS
MISCCONNECTORS
ALLOWSAMPLING
USER-DEFINED16 SIGNALS
TRACE RAMS1,000,000FRAMES
72-bit WIDE(component side
& print side)
8 MByteTRIGGERS& FILTERS
RAMSFOR 8MByte
OF S12XGLOBAL
ADDRESSSPACE
(component side& print side)
TRIGGER-IN &TRIGGER-OUTCONNECTORS
AND TPs
TRACE LED
INDICATORS
INDEPENDENTTRACE CLOCK
HCS12 Emulator Components* FLEX-CABLE ADAPTER ALSO AVAILABLE FOR THE S12X FAMILY
HCS12 Emulator Components
Escaping From the Target at Any of 4 Directions
S12X & HCS12 Target Boards are often buried deep between modules, with very limited access to the target board. The Nohau Flex-Cable resolves this problem by allowing to escape from the target, and connect to the full-emulator, in any of 4 directions. The flex-cable is also designed for high-speed operation above 100MHz, and includes controlled impedance and shielding
System View
The IntuitiveSeehau User-Interface