![Page 1: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/1.jpg)
Sandwich Structures – an Overview
By
K.Kalaichelvan
Associate Professor,
Dept of Production Technology,
MIT Campus, Anna University Chennai
![Page 2: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/2.jpg)
Outline of Presentation
Sandwich structure – basics
Design requirement
Case study I
Applications
Case Study II
Conclusion
![Page 3: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/3.jpg)
Sandwich Structure
Sandwich structure, consists of high strength facings or skins, being adhesively bonded to the low density core.
As per ASTM C274-53
A laminar construction comprising a combination of alternating dissimilar simple or composite materials assembled and intimately fixed in relation to each other so as to use the properties of each to attain specific structural advantages for the whole assembly
![Page 4: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/4.jpg)
Core: A centrally located layer of a sandwich construction, usually low density, which separates and stablises the facings and transmits shear between the facings and provides most of the shear rigidity of the construction.
Facing (skin/face/face sheet):The outermost layer, generally thin and of high density, which resists of most of the edgewise loads and flatwise bending moments.
Adhesives:The adhesives are used to bind the Core and Facing.
Terminology of Sandwich Structures
![Page 5: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/5.jpg)
Sandwich Construction Thin composite skins bonded to thicker,
lightweight core. Large increase in second moment of area
without weight penalty. Core needs good shear stiffness and strength. Skins carry tension and compression loads.
![Page 6: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/6.jpg)
honeycombadhesive layer
face sheet
![Page 7: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/7.jpg)
Sandwich panels are a very efficient way of providing high bending stiffness at low weight. The stiff, strong facing skins carry the bending loads, while the core resists shear loads. The principle is the same as a traditional ‘I’ beam:
![Page 8: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/8.jpg)
Stiffness increase and weight reduction of sandwich composites
![Page 9: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/9.jpg)
Composite sandwich structures are stiffer and stronger than the same weight single skin panels.
![Page 10: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/10.jpg)
![Page 11: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/11.jpg)
Selection of Core material
![Page 12: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/12.jpg)
Foam core comparison
PVC (closed cell)
- ‘linear’ – high ductility, low properties- ‘cross-linked’ – high strength and stiffness, but brittle- ~ 50% reduction of properties at 40-60oC- chemical breakdown (HCl vapour) at 200oC
![Page 13: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/13.jpg)
Foam core comparison
PU
- inferior to PVC at ambient temperatures- better property retention (max. 100oC)
Phenolic
- poor mechanical properties- good fire resistance- strength retention to 150oC
![Page 14: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/14.jpg)
Foam core comparison
Syntactic foam
- glass or polymer microspheres- used as sandwich core or buoyant filler- high compressive strength
Balsa
- efficient and low cost- absorbs water (swelling and rot)- not advisable for primary hull and deck structures; OK for internal bulkheads
![Page 15: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/15.jpg)
Sandwich Panels
![Page 16: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/16.jpg)
Sandwich panels contd..
![Page 17: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/17.jpg)
Design requirements
To find optimum Thickness of core (c) and Thickness of Face sheet (t)
for a specific stiffness ,minimum weight is to be obtained
![Page 18: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/18.jpg)
Design Procedure
1.Core thickness ‘c’ == ‘d’ (1)
2.Core Modulus = Ec* ( * indicates property of the foam rather
than the material of foam made from)
![Page 19: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/19.jpg)
3. Density of Core = ρc*
4. Core Shear Modulus = Gc*
5. Density of Face sheet = ρf
6. Longitudinal Stiffness of face sheet = Ef
7. Equivalent Flexural stiffness = (EI)eq
(EI)eq = Ef[Second moment of area of face sheet]
+
Ec[second moment of area of core]
= Ef [(bt3/6) + (btd2 /2)] + Ec[bc3/6]
------- (2)
![Page 20: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/20.jpg)
The first, second and third terms describe the stiffness of the two face sheets and the core, while the second term adds the stiffness of the faces about the neutral axis of the beam. In a good beam design, the second term is substantially larger than the first and third terms and using equation (1) then
(EI)eq = Ef (btc2 /2) ----- (3)
8.Equivalent Shear Rigidity = (AG)eq
(AG)eq = Gc*bc ------ (4)
![Page 21: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/21.jpg)
Total deflection = bending + shear
Bending depends on the skin properties; shear depends on the core
The stiff, strong facing skins carry the bending loads, while the core resists shear loads.
![Page 22: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/22.jpg)
Contd..
9.When load ‘P’ acting on the end of Cantilever , the total deflection is sum of bending and shear components
δ = δb + δs = (Pl3/B1 EI) + (Pl/B2AG) using equation (3) and (4)
δ = (2l3/B1 Ef btc2) + (l/B2bcGc*) ------- (5)
10. For minimising weight: W = 2ρfgblt + ρc*gblc ------- (6)
![Page 23: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/23.jpg)
Contd. To find optimum core thickness ‘c’ and face sheet
thickness ‘t’, two parameters (c/l) and (t/l) are considered.
Two constraints namely stiffness constraint and weight constraint are constructed from equation (5) and equation (6) respectively
11. From equation (5), Stiffness constraint is
------ (7)
![Page 24: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/24.jpg)
Contd..
12. From equation (6), weight constraint is
----- (8)
For a specific stiffness (P/ δ) and a series of parallel lines for successively increasing weights(W) a graph is constructed
![Page 25: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/25.jpg)
The optimum design point is found where objective function line is tangent to the stiffness constraint. At this point the optimum (minimum weight) values of face sheet thickness ‘t’ and core thickness ‘c’ for a specific stiffness can be taken from graph
![Page 26: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/26.jpg)
The discontinuity of the stress at the skin/core boundary is a clear indication that the fiberglass is absorbing far more tension and compression then the core. The same applies to the simple 'I' beam.
So far, it has been only shown that bonding a strong, tensile material to the core will relieve it of a lot of stress yet make the entire sandwich core stronger.
![Page 27: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/27.jpg)
Yield Stress at face for the given load P
Yield Stress at Core for the given load P
Mode of Loading B1 B2 B3 B4
Cantilever, end load (P) 3 1 1 1
Cantilever, uniformly distributed load (P/l)
8 2 2 1
Three point Bend, central load (P)
48 4 4 2
Three point Bend, uniformly distributed load (P/l)
384/5 8 8 2
Ends built in, central load (P)
192 4 8 2
Ends built in, uniformly distributed load (P/l)
384 8 12 2
![Page 28: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/28.jpg)
Case Study
Fabrication of 3D – spacer fabric Sandwich structure
![Page 29: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/29.jpg)
Development of Loom Methods
- Novel Stitching method
- Automatic stitching method
![Page 30: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/30.jpg)
Effect of stitching in sandwich panels
There is the difficulty of obtaining a strong bond line between the skin and the core, which can often lead to reduction in performance or failure of the component when subjected to impact conditions.
The predominant failure is the delamination of core between the bonding interfaces.
![Page 31: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/31.jpg)
Effect of stitching in sandwich panels (Contd.) The durability of these panels becomes
degraded due to de-lamination at the bonding interfaces and stiffness.
In order to overcome the shortcomings of conventional sandwich structures, the reinforcement to thickness of sandwich structures through the stitching process is one of the solutions to the problem of averting de-lamination and minimizing the degradation of stiffness.
![Page 32: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/32.jpg)
Construction Material Specification
Skin Glass fabric 10-mil Bi-directionally
Woven Cloth.
Resin Epoxy / Hardener Dobeckot 520F / H758
Foam(Core Material) Polyurethane foam
Thermocole or extended
polystyrene
Thermocole with glass
tubes
Thermofoam
Density 65-70 kg/m3
Density 10kg/m3
Density 20kg/m3
Density 25kg/m3
Stitched fibre Glass yarn (Twisted) Distance, 8TPI
![Page 33: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/33.jpg)
![Page 34: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/34.jpg)
![Page 35: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/35.jpg)
![Page 36: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/36.jpg)
![Page 37: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/37.jpg)
It is a bar of 52cm length, with 45 needles placed at 1cm gap.
![Page 38: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/38.jpg)
The glass yarns are tied at one end and they are passed through the needle and feed from the other end.
![Page 39: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/39.jpg)
![Page 40: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/40.jpg)
![Page 41: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/41.jpg)
![Page 42: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/42.jpg)
DOWNWARD MOVEMENT(Z-AXIS) OF THE NEEDLE
BOBBIN ROTATION(1 REVOLUTION PER STITCH)
CROSSWISE MOVEMENT OF THE TABLE CARRYING THE STITCHING MECHANISM
LENGTHWISE DISPLACEMENT OF THE TABLE FOR VARYING THE PILE DENSITY
![Page 43: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/43.jpg)
Needle bar arrangement.
Bobbin arrangement with stopper and lock.
![Page 44: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/44.jpg)
![Page 45: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/45.jpg)
Loop formation in Automatic stitching
![Page 46: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/46.jpg)
![Page 47: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/47.jpg)
Automatic stitching
The 10-mil bi-directionally woven glass fabrics were inserted above and below the transverse angle section, throughout the work area
It was firmly held in the roller rods, such that the fabric was held in tension
The top and the bottom decks were assembled and both of the decks were placed at the left bottom corner.
The absence frictional forces were confirmed by providing proper lubrication in the supporting bush for needle bar.
![Page 48: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/48.jpg)
Automatic stitching (contd.)
The glass thread was wound in the both in bobbin and thread holder for the needle thread.
The glass fabric should be clean from foreign particles.
The stitching mechanism should be activated.
![Page 49: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/49.jpg)
CURING OF RESIN
The resin used was epoxy resin –CY230
The hardener used is HY951
The resin and hardener mixing ratio 100 : 9
Curing time is 7-10 hrs.
![Page 50: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/50.jpg)
Polyurethane Foam
![Page 51: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/51.jpg)
PREPARATION OF CORE
Polyurethane foam is injected inside the 3D space.
Polyal and isocyanide is mixed in equal proportion.
Curing time is 45sec.
![Page 52: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/52.jpg)
3D Spacer fabric without Foam
![Page 53: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/53.jpg)
3D Spacer Fabric with Foam
![Page 54: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/54.jpg)
3D spacer Fabric (Top View)
![Page 55: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/55.jpg)
WITHOUT GLASS TUBES WITH GLASS TUBES
![Page 56: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/56.jpg)
![Page 57: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/57.jpg)
FLEXURAL PROPERTIES OF SANDWICH COMPOSITES
ASTM standard C-393
Static Bending test.
Load at a constant rate of 5mm/min
![Page 58: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/58.jpg)
DIMENSION OF THE SPECIMEN
Total Length : 200mm
Span Length : 150mm
Width : 60mm
Depth : 20.6mm
![Page 59: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/59.jpg)
MID-SPAN LOADING
![Page 60: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/60.jpg)
QUARTER-POINT LOADING
![Page 61: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/61.jpg)
Flexural Stiffness Parameter D and Core Shear Modulus G
![Page 62: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/62.jpg)
![Page 63: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/63.jpg)
CORE MATERIALS The flexural stiffness of thermocole with glass tubes 2x1 areal pile
density showed an increase of 213.72% and core shear modulus showed an increase of 84.79% compared to that of the polyurethane foam
The introduction of glass tubes have a significant effect on the flexural stiffness
Thermocole specimen with glass tubes also showed excellent core compressive strength compared to other specimens.
The flexural stiffness of thermocole with glass tubes increased by 176.8% and the core shear modulus increased by 657.05% compared to that of the thermofoam.
![Page 64: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/64.jpg)
AREAL PILE DENSITYThe thermofoam cored specimen with 1x1 cm areal pile
density showed an increase of 495.8% in terms of flexural stiffness and an increase of 550.79% in terms of core shear modulus
The areal pile density increases the bending strength of the sandwich composite.
The damage propagation (i.e. delamination) is reduced by increasing the areal pile density.
The core shear rigidity increases with the increase in the areal pile density.
![Page 65: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/65.jpg)
FLEXURE CREEP Thermocole with glass tubes showed a dominancy of 16.73% compared to
thermocole without glass tubes
Thermofoam has predominant compressive load carrying capacity and retains its original shape and size after the application of the forces.
![Page 66: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/66.jpg)
Applications
![Page 67: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/67.jpg)
Panels manufactured by Chempharm on the latest Sheet thickness : 0.5 mm to 0.8 mmmachines in India with following SpecificationSize: 1.2 Sandwich / Composite Mtr widths x 6.2 Mtr heightsMaterial of construction: / SS 304 / SS 316Overall thickness of the panel : 50 mm to 200 mmFilling Material : PUF / Mineral wool / Honey comb paper / EPS Application / Usage:Clean Room # 100 to # 100,000 for Pharmaceutical and Electronic industriesOffice Partitions for Industry High bay Warehouses, Storage facilitiesCold storages /Cold rooms and CA systemsRoof structure for Industrial Shed Important Note :The Mineral panel is biologically inert and recyclable. Mineral Panels are used for Fire retardant Application.
![Page 68: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/68.jpg)
Contd..
Fan blade of modern gas turbine jet engines :
Two titanium alloy skins (the front and rear surface of the blade) are separated and bonded to a honeycomb structure made from titanium sheet
Hulls of modern racing yachts :
Two thin layers of composite skin (glass/carbon/kevlar in vinyl ester/epoxy) are separated by a nomex core (nomex is a combination aluminium honeycomb filled with rigid polyurethane foam).
![Page 69: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/69.jpg)
Honeycomb Sandwich structure – a Case study
![Page 70: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/70.jpg)
Component Material Specification
Core Glass ‘E’ fabricEpoxyHardener
Fiber – 220 GSM, Plain weaveLY 556HY 951Cell shape – regular hexagonCell size – 8, 16, 20, 25 mmCell thickness – 0.2 mmHeight – 8 mm
Facing Glass ‘E’ fabricEpoxyHardener
Fiber – 220 GSM, plain weaveLY 556HY 951Thickness – 1 mm
Adhesive Epoxy Flox adhesive
• Matrix used is epoxy resin LY 556 of density 20 g/m3
• Hardener HY 951 of density 0.972 to 0.992 g/ m3.• Resin and hardener is mixed in the weight ratio of 10:1.
• Matrix used is epoxy resin LY 556 of density 20 g/m3
• Hardener HY 951 of density 0.972 to 0.992 g/ m3.• Resin and hardener is mixed in the weight ratio of 10:1.
Selection of Core and Face materials
![Page 71: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/71.jpg)
1. Basic raw materials glass cloth, Epoxy resin LY 556 and Hardener HY951 2. Glass and resin ratio is 65:35. The hardener is 10% of the resin percentage.3. Composites split honeycomb molding tool is made for special purpose fabrication 4. Take the resin and hardener, mix thoroughly and impregnate the glass cloth with the resin mixture and spread over the mould. 5.Then place the mandrel in the respective locations. Subject the system to vacuum for 30 minutes up to 450-500 Hg/mm2 3/2 – 2 hours.6. After ambient curing, release the mould (first half), similarly fabricate the second half 7. By getting two halves, join in together (which forms hexagonal structured cell). Similarly successive honeycomb cells are fabricated and integrated 8. Cut the honeycomb structure to the required standards. Take two plies of glass cloth impregnate the resin mixture, spread it on the honeycomb open structure and similarly apply the vacuum pressure.9. After ambient curing, subject the honeycomb structure to post curing.10.This is achieved by hot-air oven for 100 0C up to 2 hours
1. Basic raw materials glass cloth, Epoxy resin LY 556 and Hardener HY951 2. Glass and resin ratio is 65:35. The hardener is 10% of the resin percentage.3. Composites split honeycomb molding tool is made for special purpose fabrication 4. Take the resin and hardener, mix thoroughly and impregnate the glass cloth with the resin mixture and spread over the mould. 5.Then place the mandrel in the respective locations. Subject the system to vacuum for 30 minutes up to 450-500 Hg/mm2 3/2 – 2 hours.6. After ambient curing, release the mould (first half), similarly fabricate the second half 7. By getting two halves, join in together (which forms hexagonal structured cell). Similarly successive honeycomb cells are fabricated and integrated 8. Cut the honeycomb structure to the required standards. Take two plies of glass cloth impregnate the resin mixture, spread it on the honeycomb open structure and similarly apply the vacuum pressure.9. After ambient curing, subject the honeycomb structure to post curing.10.This is achieved by hot-air oven for 100 0C up to 2 hours
VACUUM BAG MOULDING VACUUM BAG MOULDING
![Page 72: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/72.jpg)
Fabrication of Honeycomb core
11 22
33 44
![Page 73: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/73.jpg)
Fabrication of Sandwich
11 22
33
![Page 74: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/74.jpg)
Fabrication of Sandwich contd…
44 55
66 77
![Page 75: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/75.jpg)
Summary of Case study II
Honeycomb sandwich structure was developed by varying cell height
Sandwich having Cell size of 8mm obtains better results when compared with other cell sizes.
Core shear modulus relation is established with respect to density ratio.
![Page 76: Sandwich Structures - An Overeview 7 Dec, RPT Dept](https://reader034.vdocument.in/reader034/viewer/2022051609/54761605b4af9fa9358b45e1/html5/thumbnails/76.jpg)