![Page 1: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/1.jpg)
Semiconductor Devices
Carrier Transport: Part 1
M. B. [email protected]
www.ee.iitb.ac.in/~sequel
Department of Electrical EngineeringIndian Institute of Technology Bombay
M. B. Patil, IIT Bombay
![Page 2: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/2.jpg)
Carrier transport
* We have discussed equilibrium condition in a semiconductorwithout any variations in space.
* We know how to obtain n and p, given the doping densities(Nd and Na) and temperature.
* This background is useful even in non-equilibrium situationsbecause there are regions in a semiconductor device which arealmost in equilibrium.
* We now go one step further and develop an understanding ofcurrent flow and carrier dynamics in a semiconductor, an essentialingredient in any semiconductor device.
M. B. Patil, IIT Bombay
![Page 3: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/3.jpg)
Carrier transport
* We have discussed equilibrium condition in a semiconductorwithout any variations in space.
* We know how to obtain n and p, given the doping densities(Nd and Na) and temperature.
* This background is useful even in non-equilibrium situationsbecause there are regions in a semiconductor device which arealmost in equilibrium.
* We now go one step further and develop an understanding ofcurrent flow and carrier dynamics in a semiconductor, an essentialingredient in any semiconductor device.
M. B. Patil, IIT Bombay
![Page 4: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/4.jpg)
Carrier transport
* We have discussed equilibrium condition in a semiconductorwithout any variations in space.
* We know how to obtain n and p, given the doping densities(Nd and Na) and temperature.
* This background is useful even in non-equilibrium situationsbecause there are regions in a semiconductor device which arealmost in equilibrium.
* We now go one step further and develop an understanding ofcurrent flow and carrier dynamics in a semiconductor, an essentialingredient in any semiconductor device.
M. B. Patil, IIT Bombay
![Page 5: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/5.jpg)
Carrier transport
* We have discussed equilibrium condition in a semiconductorwithout any variations in space.
* We know how to obtain n and p, given the doping densities(Nd and Na) and temperature.
* This background is useful even in non-equilibrium situationsbecause there are regions in a semiconductor device which arealmost in equilibrium.
* We now go one step further and develop an understanding ofcurrent flow and carrier dynamics in a semiconductor, an essentialingredient in any semiconductor device.
M. B. Patil, IIT Bombay
![Page 6: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/6.jpg)
Carrier transport
* We have discussed equilibrium condition in a semiconductorwithout any variations in space.
* We know how to obtain n and p, given the doping densities(Nd and Na) and temperature.
* This background is useful even in non-equilibrium situationsbecause there are regions in a semiconductor device which arealmost in equilibrium.
* We now go one step further and develop an understanding ofcurrent flow and carrier dynamics in a semiconductor, an essentialingredient in any semiconductor device.
M. B. Patil, IIT Bombay
![Page 7: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/7.jpg)
Drift current
electron/hole hole electron
E = 0
E E
∆x ∆x
* The motion of carriers under the action of an electric field is known as “drift.”
* In a semiconductor, electrons and holes are continuously moving with large instantaneousvelocities. However, their trajectories are interrupted because of “scattering events.”
* With zero electric field, the average displacement of a carrier is zero.
* In the presence of an electric field, a carrier undergoes a net change ∆x in its position
over a time interval ∆t.∆x
∆tis called the “drift velocity” of the carrier.
M. B. Patil, IIT Bombay
![Page 8: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/8.jpg)
Drift current
electron/hole hole electron
E = 0
E E
∆x ∆x
* The motion of carriers under the action of an electric field is known as “drift.”
* In a semiconductor, electrons and holes are continuously moving with large instantaneousvelocities. However, their trajectories are interrupted because of “scattering events.”
* With zero electric field, the average displacement of a carrier is zero.
* In the presence of an electric field, a carrier undergoes a net change ∆x in its position
over a time interval ∆t.∆x
∆tis called the “drift velocity” of the carrier.
M. B. Patil, IIT Bombay
![Page 9: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/9.jpg)
Drift current
electron/hole hole electron
E = 0
E E
∆x ∆x
* The motion of carriers under the action of an electric field is known as “drift.”
* In a semiconductor, electrons and holes are continuously moving with large instantaneousvelocities. However, their trajectories are interrupted because of “scattering events.”
* With zero electric field, the average displacement of a carrier is zero.
* In the presence of an electric field, a carrier undergoes a net change ∆x in its position
over a time interval ∆t.∆x
∆tis called the “drift velocity” of the carrier.
M. B. Patil, IIT Bombay
![Page 10: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/10.jpg)
Drift current
electron/hole hole electron
E = 0
E E
∆x ∆x
* The motion of carriers under the action of an electric field is known as “drift.”
* In a semiconductor, electrons and holes are continuously moving with large instantaneousvelocities. However, their trajectories are interrupted because of “scattering events.”
* With zero electric field, the average displacement of a carrier is zero.
* In the presence of an electric field, a carrier undergoes a net change ∆x in its position
over a time interval ∆t.∆x
∆tis called the “drift velocity” of the carrier.
M. B. Patil, IIT Bombay
![Page 11: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/11.jpg)
Drift current
electron/hole hole electron
E = 0
E E
∆x ∆x
* The motion of carriers under the action of an electric field is known as “drift.”
* In a semiconductor, electrons and holes are continuously moving with large instantaneousvelocities. However, their trajectories are interrupted because of “scattering events.”
* With zero electric field, the average displacement of a carrier is zero.
* In the presence of an electric field, a carrier undergoes a net change ∆x in its position
over a time interval ∆t.∆x
∆tis called the “drift velocity” of the carrier.
M. B. Patil, IIT Bombay
![Page 12: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/12.jpg)
Scattering of carriers
* Phonons: Phonons can be thought of as quantum-mechanical “particles” representinglattice vibrations. An electron or a hole can absorb or emit a phonon, gaining or losingenergy, accompanied by a change in its momentum.
* Impurity ions: An ionised donor or acceptor atom is a disruption in the periodic latticepotential of a semiconductor and is therefore a cause for carrier scattering.
* Defects: A semiconductor crystal may have defects, i.e., departures from its periodicstructure. These deviations cause a change in the periodic lattice potential and thereforelead to scattering.
vacancy
interstitialdefect
edge dislocation
* Note that the atoms of the semiconductor crystal do not cause scattering. They arealready accounted for in computing the band structure of the semiconductor.
M. B. Patil, IIT Bombay
![Page 13: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/13.jpg)
Scattering of carriers
* Phonons: Phonons can be thought of as quantum-mechanical “particles” representinglattice vibrations. An electron or a hole can absorb or emit a phonon, gaining or losingenergy, accompanied by a change in its momentum.
* Impurity ions: An ionised donor or acceptor atom is a disruption in the periodic latticepotential of a semiconductor and is therefore a cause for carrier scattering.
* Defects: A semiconductor crystal may have defects, i.e., departures from its periodicstructure. These deviations cause a change in the periodic lattice potential and thereforelead to scattering.
vacancy
interstitialdefect
edge dislocation
* Note that the atoms of the semiconductor crystal do not cause scattering. They arealready accounted for in computing the band structure of the semiconductor.
M. B. Patil, IIT Bombay
![Page 14: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/14.jpg)
Scattering of carriers
* Phonons: Phonons can be thought of as quantum-mechanical “particles” representinglattice vibrations. An electron or a hole can absorb or emit a phonon, gaining or losingenergy, accompanied by a change in its momentum.
* Impurity ions: An ionised donor or acceptor atom is a disruption in the periodic latticepotential of a semiconductor and is therefore a cause for carrier scattering.
* Defects: A semiconductor crystal may have defects, i.e., departures from its periodicstructure. These deviations cause a change in the periodic lattice potential and thereforelead to scattering.
vacancy
interstitialdefect
edge dislocation
* Note that the atoms of the semiconductor crystal do not cause scattering. They arealready accounted for in computing the band structure of the semiconductor.
M. B. Patil, IIT Bombay
![Page 15: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/15.jpg)
Scattering of carriers
* Phonons: Phonons can be thought of as quantum-mechanical “particles” representinglattice vibrations. An electron or a hole can absorb or emit a phonon, gaining or losingenergy, accompanied by a change in its momentum.
* Impurity ions: An ionised donor or acceptor atom is a disruption in the periodic latticepotential of a semiconductor and is therefore a cause for carrier scattering.
* Defects: A semiconductor crystal may have defects, i.e., departures from its periodicstructure. These deviations cause a change in the periodic lattice potential and thereforelead to scattering.
vacancy
interstitialdefect
edge dislocation
* Note that the atoms of the semiconductor crystal do not cause scattering. They arealready accounted for in computing the band structure of the semiconductor.
M. B. Patil, IIT Bombay
![Page 16: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/16.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
hole electron
E E
∆x ∆x GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
T= 300K
* At low fields (up to a few kV/cm), the drift velocity vd varies linearly with the electric field E. (Note thata 10 x change in E causes a 10 x change in vd .)
* The low-field region is characterised by the “mobility” (µn for electrons, µp for holes), defined as µ =vd
E .
* Units of µ:cm
s× 1
V/cm→ cm2
V-s.
* µ =qτ
m∗ , where m∗ is the effective mass and τ is the momentum relaxation time, i.e., the average time
interval between successive scattering events (typically 10−14 to 10−12 sec, i.e., 0.01 ps to 1 ps).
M. B. Patil, IIT Bombay
![Page 17: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/17.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
hole electron
E E
∆x ∆x GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
T= 300K
* At low fields (up to a few kV/cm), the drift velocity vd varies linearly with the electric field E. (Note thata 10 x change in E causes a 10 x change in vd .)
* The low-field region is characterised by the “mobility” (µn for electrons, µp for holes), defined as µ =vd
E .
* Units of µ:cm
s× 1
V/cm→ cm2
V-s.
* µ =qτ
m∗ , where m∗ is the effective mass and τ is the momentum relaxation time, i.e., the average time
interval between successive scattering events (typically 10−14 to 10−12 sec, i.e., 0.01 ps to 1 ps).
M. B. Patil, IIT Bombay
![Page 18: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/18.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
hole electron
E E
∆x ∆x GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
T= 300K
* At low fields (up to a few kV/cm), the drift velocity vd varies linearly with the electric field E. (Note thata 10 x change in E causes a 10 x change in vd .)
* The low-field region is characterised by the “mobility” (µn for electrons, µp for holes), defined as µ =vd
E .
* Units of µ:cm
s× 1
V/cm→ cm2
V-s.
* µ =qτ
m∗ , where m∗ is the effective mass and τ is the momentum relaxation time, i.e., the average time
interval between successive scattering events (typically 10−14 to 10−12 sec, i.e., 0.01 ps to 1 ps).
M. B. Patil, IIT Bombay
![Page 19: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/19.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
hole electron
E E
∆x ∆x GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
T= 300K
* At low fields (up to a few kV/cm), the drift velocity vd varies linearly with the electric field E. (Note thata 10 x change in E causes a 10 x change in vd .)
* The low-field region is characterised by the “mobility” (µn for electrons, µp for holes), defined as µ =vd
E .
* Units of µ:cm
s× 1
V/cm→ cm2
V-s.
* µ =qτ
m∗ , where m∗ is the effective mass and τ is the momentum relaxation time, i.e., the average time
interval between successive scattering events (typically 10−14 to 10−12 sec, i.e., 0.01 ps to 1 ps).
M. B. Patil, IIT Bombay
![Page 20: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/20.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
hole electron
E E
∆x ∆x GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
T= 300K
* At low fields (up to a few kV/cm), the drift velocity vd varies linearly with the electric field E. (Note thata 10 x change in E causes a 10 x change in vd .)
* The low-field region is characterised by the “mobility” (µn for electrons, µp for holes), defined as µ =vd
E .
* Units of µ:cm
s× 1
V/cm→ cm2
V-s.
* µ =qτ
m∗ , where m∗ is the effective mass and τ is the momentum relaxation time, i.e., the average time
interval between successive scattering events (typically 10−14 to 10−12 sec, i.e., 0.01 ps to 1 ps).M. B. Patil, IIT Bombay
![Page 21: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/21.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
Doping density (cm−3)
µn
µp
µ(cm
2/V
-s)
103
104
102
Nd= 1014 (cm−3)
1018
1017
1016
µn(cm
2/V
-s)
1000100T (K)
GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
102
103
1014T= 300K
T= 300K
1016 1018 1020
* The velocity-field relationship is related to the detailed band structure and scatteringmechanisms in the semiconductor.
As E is increased, vd saturates in silicon.
In GaAs, as E is increased, vd increases, reaches a peak, and then decreases to saturateto a constant value.
* The mobility varies significantly with temperature and doping density.
M. B. Patil, IIT Bombay
![Page 22: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/22.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
Doping density (cm−3)
µn
µp
µ(cm
2/V
-s)
103
104
102
Nd= 1014 (cm−3)
1018
1017
1016
µn(cm
2/V
-s)
1000100T (K)
GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
102
103
1014T= 300K
T= 300K
1016 1018 1020
* The velocity-field relationship is related to the detailed band structure and scatteringmechanisms in the semiconductor.
As E is increased, vd saturates in silicon.
In GaAs, as E is increased, vd increases, reaches a peak, and then decreases to saturateto a constant value.
* The mobility varies significantly with temperature and doping density.
M. B. Patil, IIT Bombay
![Page 23: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/23.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
Doping density (cm−3)
µn
µp
µ(cm
2/V
-s)
103
104
102
Nd= 1014 (cm−3)
1018
1017
1016
µn(cm
2/V
-s)
1000100T (K)
GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
102
103
1014T= 300K
T= 300K
1016 1018 1020
* The velocity-field relationship is related to the detailed band structure and scatteringmechanisms in the semiconductor.
As E is increased, vd saturates in silicon.
In GaAs, as E is increased, vd increases, reaches a peak, and then decreases to saturateto a constant value.
* The mobility varies significantly with temperature and doping density.
M. B. Patil, IIT Bombay
![Page 24: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/24.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
Doping density (cm−3)
µn
µp
µ(cm
2/V
-s)
103
104
102
Nd= 1014 (cm−3)
1018
1017
1016
µn(cm
2/V
-s)
1000100T (K)
GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
102
103
1014T= 300K
T= 300K
1016 1018 1020
* The velocity-field relationship is related to the detailed band structure and scatteringmechanisms in the semiconductor.
As E is increased, vd saturates in silicon.
In GaAs, as E is increased, vd increases, reaches a peak, and then decreases to saturateto a constant value.
* The mobility varies significantly with temperature and doping density.
M. B. Patil, IIT Bombay
![Page 25: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/25.jpg)
Drift current
108
107
105
106
102 103 104 105 106
v d(cm/s)
E (V/cm)
Doping density (cm−3)
µn
µp
µ(cm
2/V
-s)
103
104
102
Nd= 1014 (cm−3)
1018
1017
1016
µn(cm
2/V
-s)
1000100T (K)
GaAs (n)
GaAs (p)
Si (n)
Si (p)
vd=µE
102
103
1014T= 300K
T= 300K
1016 1018 1020
* The velocity-field relationship is related to the detailed band structure and scatteringmechanisms in the semiconductor.
As E is increased, vd saturates in silicon.
In GaAs, as E is increased, vd increases, reaches a peak, and then decreases to saturateto a constant value.
* The mobility varies significantly with temperature and doping density.
M. B. Patil, IIT Bombay
![Page 26: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/26.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* The electric field shown in the figure causes holes to drift in the +x direction with avelocity vp
d and electrons in the −x direction with a velocity −vnd .
* “Flux” is defined as the number of carriers crossing a unit area in one second.
* Consider the box in the figure.
Fp =number of holes in the box
time to traverse ∆x× 1
A=
p A∆x
∆x/vpd
× 1
A= p vp
d .
Similarly, Fn = −n vnd .
* Current density J = Jp + Jn = (+q)×Fp + (−q)×Fn = q (p vpd + n vn
d ).
M. B. Patil, IIT Bombay
![Page 27: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/27.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* The electric field shown in the figure causes holes to drift in the +x direction with avelocity vp
d and electrons in the −x direction with a velocity −vnd .
* “Flux” is defined as the number of carriers crossing a unit area in one second.
* Consider the box in the figure.
Fp =number of holes in the box
time to traverse ∆x× 1
A=
p A∆x
∆x/vpd
× 1
A= p vp
d .
Similarly, Fn = −n vnd .
* Current density J = Jp + Jn = (+q)×Fp + (−q)×Fn = q (p vpd + n vn
d ).
M. B. Patil, IIT Bombay
![Page 28: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/28.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* The electric field shown in the figure causes holes to drift in the +x direction with avelocity vp
d and electrons in the −x direction with a velocity −vnd .
* “Flux” is defined as the number of carriers crossing a unit area in one second.
* Consider the box in the figure.
Fp =number of holes in the box
time to traverse ∆x× 1
A=
p A∆x
∆x/vpd
× 1
A= p vp
d .
Similarly, Fn = −n vnd .
* Current density J = Jp + Jn = (+q)×Fp + (−q)×Fn = q (p vpd + n vn
d ).
M. B. Patil, IIT Bombay
![Page 29: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/29.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* The electric field shown in the figure causes holes to drift in the +x direction with avelocity vp
d and electrons in the −x direction with a velocity −vnd .
* “Flux” is defined as the number of carriers crossing a unit area in one second.
* Consider the box in the figure.
Fp =number of holes in the box
time to traverse ∆x× 1
A=
p A∆x
∆x/vpd
× 1
A= p vp
d .
Similarly, Fn = −n vnd .
* Current density J = Jp + Jn = (+q)×Fp + (−q)×Fn = q (p vpd + n vn
d ).
M. B. Patil, IIT Bombay
![Page 30: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/30.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* The electric field shown in the figure causes holes to drift in the +x direction with avelocity vp
d and electrons in the −x direction with a velocity −vnd .
* “Flux” is defined as the number of carriers crossing a unit area in one second.
* Consider the box in the figure.
Fp =number of holes in the box
time to traverse ∆x× 1
A=
p A∆x
∆x/vpd
× 1
A= p vp
d .
Similarly, Fn = −n vnd .
* Current density J = Jp + Jn = (+q)×Fp + (−q)×Fn = q (p vpd + n vn
d ).
M. B. Patil, IIT Bombay
![Page 31: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/31.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* Current density J = Jn + Jp = +qFp + (−q)Fp = q (p vpd + n vn
d ).
* If the electric field is small, vpd = µpE, vn
d = µnE.
→ J = q (µpp + µnn) E.
* Check units: Coul× cm2
V-s× 1
cm3× V
cm=
Amp
cm2
M. B. Patil, IIT Bombay
![Page 32: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/32.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* Current density J = Jn + Jp = +qFp + (−q)Fp = q (p vpd + n vn
d ).
* If the electric field is small, vpd = µpE, vn
d = µnE.
→ J = q (µpp + µnn) E.
* Check units: Coul× cm2
V-s× 1
cm3× V
cm=
Amp
cm2
M. B. Patil, IIT Bombay
![Page 33: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/33.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* Current density J = Jn + Jp = +qFp + (−q)Fp = q (p vpd + n vn
d ).
* If the electric field is small, vpd = µpE, vn
d = µnE.
→ J = q (µpp + µnn) E.
* Check units: Coul× cm2
V-s× 1
cm3× V
cm=
Amp
cm2
M. B. Patil, IIT Bombay
![Page 34: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/34.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* Current density J = Jn + Jp = +qFp + (−q)Fp = q (p vpd + n vn
d ).
* If the electric field is small, vpd = µpE, vn
d = µnE.
→ J = q (µpp + µnn) E.
* Check units: Coul× cm2
V-s× 1
cm3× V
cm
=Amp
cm2
M. B. Patil, IIT Bombay
![Page 35: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/35.jpg)
Drift current
electric field
electron flux
hole flux
electron current density
hole current density
x∆x
E
Area A
E
Fn
Fp
Jn
Jp
* Current density J = Jn + Jp = +qFp + (−q)Fp = q (p vpd + n vn
d ).
* If the electric field is small, vpd = µpE, vn
d = µnE.
→ J = q (µpp + µnn) E.
* Check units: Coul× cm2
V-s× 1
cm3× V
cm=
Amp
cm2
M. B. Patil, IIT Bombay
![Page 36: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/36.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 37: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/37.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 38: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/38.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 39: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/39.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 40: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/40.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 41: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/41.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 42: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/42.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 43: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/43.jpg)
Example
5V
L
x
For the rectangular silicon bar shown in the figure, L= 50µm, and the cross-sectional area is20µm2. It is uniformly doped with Nd = 5× 1017 cm−3. At T = 300 K and with an appliedvoltage of 5 V, find the following.
(a) electric field,
(b) current density,
(c) total current,
(d) resistance of the bar,
(e) conductivity and resistivity of the material.
Given: µn = 400 cm2/V-s for Nd = 5× 1017 cm−3 at T = 300 K.
(Note: Such a bar does not exist in isolation, but we can fabricate a region inside a silicon wafer which would
resemble this structure.)
M. B. Patil, IIT Bombay
![Page 44: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/44.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 45: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/45.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 46: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/46.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 47: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/47.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 48: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/48.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)
= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 49: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/49.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
Assuming all donors to be ionised, n = p + N+d ≈ Nd = 5× 1017 cm−3.
Assume that the metal-semiconductor contacts serve as a perfect source or sink for the carriers.
The applied voltage appears across the semiconductor, resulting in a uniform field and causinga drift current.
E = − dV
dx= − V0
L= − 5 V
50× 10−4 cmi.e., −1 kV/cm ≡ E0
→ 1
q
dEc
dx= E0 →
∫ L
x=0dEc = −q V0
LL = −q V0 = −5 eV.
E0 is sufficiently low → we can use vd =µE.
J = Jn + Jp = q (Nd µn + Na µp) E ≈ q Nd µn E
= 1.6× 10−19 C× 5× 1017 1
cm3× 400
cm2
V-s×(−103 V
cm
)= −3.2× 104 A/cm2.
M. B. Patil, IIT Bombay
![Page 50: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/50.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
I = J × A = 3.2× 104 A/cm2 × 20× 10−8 cm2 = 6.4 mA.
Resistance R =V0
I= 780 Ω.
J = σ E → σ =J
E =q n µnEE = q n µn = 32 /Ω-cm.
(or compute σ directly from J and E.)
ρ =1
σ= 3.12× 10−2 Ω-cm.
M. B. Patil, IIT Bombay
![Page 51: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/51.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
I = J × A = 3.2× 104 A/cm2 × 20× 10−8 cm2 = 6.4 mA.
Resistance R =V0
I= 780 Ω.
J = σ E → σ =J
E =q n µnEE = q n µn = 32 /Ω-cm.
(or compute σ directly from J and E.)
ρ =1
σ= 3.12× 10−2 Ω-cm.
M. B. Patil, IIT Bombay
![Page 52: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/52.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
I = J × A = 3.2× 104 A/cm2 × 20× 10−8 cm2 = 6.4 mA.
Resistance R =V0
I= 780 Ω.
J = σ E → σ =J
E =q n µnEE = q n µn = 32 /Ω-cm.
(or compute σ directly from J and E.)
ρ =1
σ= 3.12× 10−2 Ω-cm.
M. B. Patil, IIT Bombay
![Page 53: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/53.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
I = J × A = 3.2× 104 A/cm2 × 20× 10−8 cm2 = 6.4 mA.
Resistance R =V0
I= 780 Ω.
J = σ E → σ =J
E =q n µnEE = q n µn = 32 /Ω-cm.
(or compute σ directly from J and E.)
ρ =1
σ= 3.12× 10−2 Ω-cm.
M. B. Patil, IIT Bombay
![Page 54: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/54.jpg)
5V
L
x
L
Ec
Ev
5 eV
E
J
I = J × A = 3.2× 104 A/cm2 × 20× 10−8 cm2 = 6.4 mA.
Resistance R =V0
I= 780 Ω.
J = σ E → σ =J
E =q n µnEE = q n µn = 32 /Ω-cm.
(or compute σ directly from J and E.)
ρ =1
σ= 3.12× 10−2 Ω-cm.
M. B. Patil, IIT Bombay
![Page 55: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/55.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 56: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/56.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 57: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/57.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 58: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/58.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 59: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/59.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 60: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/60.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 61: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/61.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 62: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/62.jpg)
Example
(a) Calculate the conductivity and resistivity of intrinsic silicon at T = 300 K.
(b) How would σ change if the temperature increases by 10 C?
Given: The electron and hole mobilities for undoped silicon (Nd → 0, Na → 0) are
µn = 1500 cm2/V-s, µp = 450 cm2/V-s at 300 K.
Solution:
(a) For intrinsic silicon, n = p = ni ≈ 1010 cm−3 at T = 300 K.
σ = q (µn ni + µp ni ) = 3.12× 10−6 /Ω-cm→ ρ= 1/σ= 3.2× 105 Ω-cm.
(b) ni for silicon nearly doubles every 10 C near room temperature.
T (C) ni (cm−3)
25 8.1× 109
35 1.7× 1010
45 3.5× 1010
55 6.9× 1010
65 1.3× 1011
75 2.3× 1011
The mobilities µn and µp do not change significantly over this temperature range.
→ at T = 310 K, ni ≈ 2× 1010 cm−3, and σ will double.
M. B. Patil, IIT Bombay
![Page 63: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/63.jpg)
Effect of doping
Let us compare the two cases we have discussed.
(a) Silicon with Nd = 5× 1017 cm−3, T = 300 K: σ = 32 /Ω-cm.
(b) Intrinsic silicon, T = 300 K: σ = 3.12× 10−6 /Ω-cm.
By replacing 5× 1017 silicon atoms per cm3 with donor atoms,
i.e., one in nearly5× 1022
5× 1017= 105 atoms, we can change the conductivity
by a factor of 107.
A huge change!
M. B. Patil, IIT Bombay
![Page 64: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/64.jpg)
Effect of doping
Let us compare the two cases we have discussed.
(a) Silicon with Nd = 5× 1017 cm−3, T = 300 K: σ = 32 /Ω-cm.
(b) Intrinsic silicon, T = 300 K: σ = 3.12× 10−6 /Ω-cm.
By replacing 5× 1017 silicon atoms per cm3 with donor atoms,
i.e., one in nearly5× 1022
5× 1017= 105 atoms, we can change the conductivity
by a factor of 107.
A huge change!
M. B. Patil, IIT Bombay
![Page 65: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/65.jpg)
Effect of doping
Let us compare the two cases we have discussed.
(a) Silicon with Nd = 5× 1017 cm−3, T = 300 K: σ = 32 /Ω-cm.
(b) Intrinsic silicon, T = 300 K: σ = 3.12× 10−6 /Ω-cm.
By replacing 5× 1017 silicon atoms per cm3 with donor atoms,
i.e., one in nearly5× 1022
5× 1017= 105 atoms, we can change the conductivity
by a factor of 107.
A huge change!
M. B. Patil, IIT Bombay
![Page 66: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/66.jpg)
Effect of doping
Let us compare the two cases we have discussed.
(a) Silicon with Nd = 5× 1017 cm−3, T = 300 K: σ = 32 /Ω-cm.
(b) Intrinsic silicon, T = 300 K: σ = 3.12× 10−6 /Ω-cm.
By replacing 5× 1017 silicon atoms per cm3 with donor atoms,
i.e., one in nearly5× 1022
5× 1017= 105 atoms, we can change the conductivity
by a factor of 107.
A huge change!
M. B. Patil, IIT Bombay
![Page 67: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/67.jpg)
Diffusion
x0
t= t0
x
t= t1
0 x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 68: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/68.jpg)
Diffusion
x0
t= t0
x
t= t1
0 x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 69: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/69.jpg)
Diffusion
x0
t= t0
x
t= t1
0
x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 70: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/70.jpg)
Diffusion
x0
t= t0
x
t= t1
0 x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 71: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/71.jpg)
Diffusion
x0
t= t0
x
t= t1
0 x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 72: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/72.jpg)
Diffusion
x0
t= t0
x
t= t1
0 x
t= t2
0
* Consider a group of particles confined to a narrow region at t = t0, with randomlyassigned initial velocities.
* The particles are subjected to random scattering events.
* As time advances, the distribution function becomes more uniform, i.e., its peak reduces,and it spreads in space.
* The particles “diffuse” much like smoke emanating from a chimney.
M. B. Patil, IIT Bombay
![Page 73: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/73.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 74: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/74.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 75: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/75.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 76: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/76.jpg)
Diffusion
t= 00
t= 2∆t
t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 77: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/77.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t
t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 78: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/78.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 79: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/79.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 80: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/80.jpg)
Diffusion
t= 00
t= 2∆t t= 5∆t t= 20∆t
Consider the “balls and bins” system in the figure, governed by the following rules.
* A ball can move from its present bin to an adjacent bin (but not beyond that) in eachtime step ∆t.
* The probabilities of a ball staying in its current bin, moving to the left bin, and moving tothe right bin (in one time step) are 0.3, 0.35, and 0.35, respectively.
We can make the following observation.
* The driving force behind the process of diffusion is a concentration gradient.
* If all bins were equally populated, the number of balls going from bin k to an adjacentbin (k − 1 or k + 1) would be equal to the number of balls coming from that bin. As aresult, the population of each bin would remain constant with time.
M. B. Patil, IIT Bombay
![Page 81: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/81.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 82: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/82.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 83: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/83.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 84: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/84.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 85: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/85.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 86: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/86.jpg)
Diffusion
* The process of diffusion is described by Fick’s law:
Fx = −D dη
dx(F = −∇η in three dimensions),
where Fx is the flux (number of particles crossing a unit area in a unit time), η is theparticle concentration, and D is the diffusion coefficient.
* In semiconductors, diffusion of electrons and holes is described by
Fn = −Dndn
dx, Fp = −Dp
dp
dx.
* Units of D: Dn ∼ Fn ×1
dn
dx
→ 1
cm2-s
11
cm3
1
cm
→ cm2
s.
* The negative sign implies that, ifdn
dxis negative, electrons will diffuse in the +x direction
(and vice versa).
n (or p) n (or p)
xx
−→F
−→F
M. B. Patil, IIT Bombay
![Page 87: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/87.jpg)
Total electron and hole current densities
Drift
hole
electron
−→E
hole
−→E
electron
n (or p) n (or p)
xx
Diffusion
* Flux due to drift:
Fdriftn = −nµnE,
Fdriftp = +pµpE.
* Flux due to diffusion:
Fdiffn = −Dn
dn
dx,
Fdiffp = −Dp
dp
dx.
* Total flux [ (cm2-s)−1]:
Fn = Fdriftn + Fdiff
n ,
Fp = Fdriftp + Fdiff
p .
* Current density (A/cm2):
Jn = −qFn = qn µnE + qDndn
dx,
Jp = +qFp = qp µpE − qDpdp
dx.
M. B. Patil, IIT Bombay
![Page 88: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/88.jpg)
Total electron and hole current densities
Drift
hole
electron
−→E
hole
−→E
electron
n (or p) n (or p)
xx
Diffusion
* Flux due to drift:
Fdriftn = −nµnE,
Fdriftp = +pµpE.
* Flux due to diffusion:
Fdiffn = −Dn
dn
dx,
Fdiffp = −Dp
dp
dx.
* Total flux [ (cm2-s)−1]:
Fn = Fdriftn + Fdiff
n ,
Fp = Fdriftp + Fdiff
p .
* Current density (A/cm2):
Jn = −qFn = qn µnE + qDndn
dx,
Jp = +qFp = qp µpE − qDpdp
dx.
M. B. Patil, IIT Bombay
![Page 89: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/89.jpg)
Total electron and hole current densities
Drift
hole
electron
−→E
hole
−→E
electron
n (or p) n (or p)
xx
Diffusion
* Flux due to drift:
Fdriftn = −nµnE,
Fdriftp = +pµpE.
* Flux due to diffusion:
Fdiffn = −Dn
dn
dx,
Fdiffp = −Dp
dp
dx.
* Total flux [ (cm2-s)−1]:
Fn = Fdriftn + Fdiff
n ,
Fp = Fdriftp + Fdiff
p .
* Current density (A/cm2):
Jn = −qFn = qn µnE + qDndn
dx,
Jp = +qFp = qp µpE − qDpdp
dx.
M. B. Patil, IIT Bombay
![Page 90: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/90.jpg)
Total electron and hole current densities
Drift
hole
electron
−→E
hole
−→E
electron
n (or p) n (or p)
xx
Diffusion
* Flux due to drift:
Fdriftn = −nµnE,
Fdriftp = +pµpE.
* Flux due to diffusion:
Fdiffn = −Dn
dn
dx,
Fdiffp = −Dp
dp
dx.
* Total flux [ (cm2-s)−1]:
Fn = Fdriftn + Fdiff
n ,
Fp = Fdriftp + Fdiff
p .
* Current density (A/cm2):
Jn = −qFn = qn µnE + qDndn
dx,
Jp = +qFp = qp µpE − qDpdp
dx.
M. B. Patil, IIT Bombay
![Page 91: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/91.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 92: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/92.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 93: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/93.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 94: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/94.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 95: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/95.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 96: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/96.jpg)
Example of equilibrium conditions
EF
Ec
Energy,(eV)
Ev
0
−0.8
n,p(cm
−3)
x (µm)
p
n
0 1 1.50.5
1018
1014
106
1010
102
Consider a section of a silicon crystal in equilibrium, with the banddiagram shown in the figure.
* Note that EF is constant, a characteristic feature of theequilibrium condition.
(For now, we are not concerned about why there is bandbending.)
* Since (Ec − EF ) and (EF − Ev ) are varying in space,
n =Nce−(Ec−EF )/kT and p =Nv e−(EF−Ev )/kT will also varyin space.
* Since EF is close to Ec ; the electron density is much largerthan the hole density (notice the log scale).
* Note that np = n2i in equilibrium for non-degenerate
conditions.
M. B. Patil, IIT Bombay
![Page 97: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/97.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Current directions:
* Jdriftn : E =
1
q
dEc
dx> 0 → Fdrift
n < 0 → Jdriftn > 0.
(Electrons flow “downhill” due to electric field.)
M. B. Patil, IIT Bombay
![Page 98: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/98.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Current directions:
* Jdriftp : E =
1
q
dEc
dx> 0 → Fdrift
p > 0 → Jdriftp > 0.
(Holes flow “uphill” due to electric field.)
M. B. Patil, IIT Bombay
![Page 99: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/99.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Drift current magnitudes:
*Jdriftn
Jdriftp
=q n µn Eq p µp E
=n µn
p µp→ |Jdrift
n | |Jdriftp |.
M. B. Patil, IIT Bombay
![Page 100: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/100.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Current directions:
* Jdiffn :
dn
dx< 0 → Fdiff
n > 0 → Jdiffn < 0.
* Jdiffp :
dp
dx> 0 → Fdiff
p < 0 → Jdiffp < 0.
M. B. Patil, IIT Bombay
![Page 101: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/101.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Current directions:
* Jdiffn :
dn
dx< 0 → Fdiff
n > 0 → Jdiffn < 0.
* Jdiffp :
dp
dx> 0 → Fdiff
p < 0 → Jdiffp < 0.
M. B. Patil, IIT Bombay
![Page 102: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/102.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Detailed balance: At equilibrium, each elementary process should be equilibrated by its reverse process. (wiki)
* In equilibrium, Jtotal = Jn + Jp = 0.
* Also, Jn = 0 and Jp = 0 individually → Jdriftn = −Jdiff
n , Jdriftp = −Jdiff
p .
M. B. Patil, IIT Bombay
![Page 103: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/103.jpg)
Example of equilibrium conditions
n,p(cm
−3)
0
−5
5
J(×
104A/cm
2)
J(×
10−9A/cm
2)
x (µm)
Jdiffp
Jdriftp
EF
Ec
Energy,(eV)
Ev
p
n
x (µm)
Jdiffn
Jdriftn
0 1 1.50.5
0
−0.8
1018
1014
106
1010
1020 1 1.50.5
0
1
−1
Detailed balance: At equilibrium, each elementary process should be equilibrated by its reverse process. (wiki)
* In equilibrium, Jtotal = Jn + Jp = 0.
* Also, Jn = 0 and Jp = 0 individually → Jdriftn = −Jdiff
n , Jdriftp = −Jdiff
p .
M. B. Patil, IIT Bombay
![Page 104: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/104.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 105: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/105.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 106: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/106.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 107: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/107.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 108: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/108.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 109: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/109.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 110: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/110.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 111: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/111.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 112: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/112.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,
kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay
![Page 113: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/113.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul
→ V
M. B. Patil, IIT Bombay
![Page 114: Semiconductor Devicessequel/ee207/sd_transport_1.pdfCarrier transport * We have discussed equilibrium condition in a semiconductor without any variations in space. * We know how to](https://reader030.vdocument.in/reader030/viewer/2022040520/5e784a53b7e7812c411dee69/html5/thumbnails/114.jpg)
Equilibrium conditions: implication of Jdriftn = −Jdiff
n
In a non-degenerate semiconductor in equilibrium,
n = Nce−(Ec−EF )/kT ,
where EF is constant, and Ec may vary with x , as we saw in the last example.
Jdriftn = q n µn E = q n µn
1
q
dEc
dx= n µn
dEc
dx.
Jdiffn = q Dn
dn
dx= q Dn Nce
−(Ec−EF )/kT
(− 1
kT
dEc
dx
)= − q
kTDn n
dEc
dx.
Jdriftn = −Jdiff
n → n µndEc
dx=
q
kTDn n
dEc
dx
→ Dn
µn=
kT
q≡ VT (thermal voltage).
Similarly, → Dp
µp=
kT
q≡ VT .
This is known as Einstein’s relation.
Check units:Dn
µn:
cm2
s× 1
cm2
V-s
→ V,kT
q:
eV
Coul→ V
M. B. Patil, IIT Bombay