Download - SHOEI 2013
• P R E M I U M •
H E L M E T S
CA
TA
LO
G
20
13
New: GT-Air 06X-Spirit II 16XR-1100 20Qwest 28
Safety & comfort 12
Neotec 30Multitec 34
New: J-Cruise 36RJ Platinum-R 40S-20 42
Hornet-DS 44VFX-W 48TR-3 53
Accessories 54
FULL FACE HELMETS
SHOEI TECHNOLOGY
FLIP UP HELMETS
OPEN FACE HELMETS
OFF-ROAD HELMETS
EXTRAS
SAFETYCOMFORTPASSION
GT-AIR
6
SETS THE NEWSTANDARD
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS-liner system with multiple densitiesOptimized protection trough EPS elements with different shock absorbing levels
• Mist-retardant CNS-1 Pinlock systemFast and easy to change
• Micro ratchet systemEasy to handle, always perfect adjusted
• Security systemE.Q.R.S. (Emergency Quick Release System) for easy helmet removal in case of an accident
WEARING COMFORT
• QSV-1 sun visorDIN EN1836 approved
• 3 different outer shell constructionsFor perfect fit and compact dimensions1) XS-M, 2) L, 3) XL-XXL
• 3d-centerpad, detachable, washableFor pleasant wearing comfort
• Cheek pads detachable, washableFor better care and individual adjustment
• Chinstrap cover detachable, washableEasy to maintain and clean
• Ear padsTo reduce noise
• Prepared for Intercom installation
VENTILATION
• Multiple venting and extractionFor optimum ventilation performance
• Inlets on brow and chinFresh air supply guaranteed
• Outlets at the rearTo exhaust warm air
AERODYNAMIC
• Integrated spoilerFor optimised aero dynamical performance
7
NEW
FULL FACE H
ELMETS
ACCESSORIES
• Cheek pads In different sizes for individual adjustment
• Centre padIn different thicknesses
• BreathguardPrevents fogging of the visor (Included)
• ChincurtainReduces turbulences inside the helmet (Included)
• Original SHOEI helmet bagComes with the helmet
8
SHELL SIZES
SHELL SIZES
GT-AIR
8
SUN VISORINTEGRATED
PULL
ADVANCED AERODYNAMICS
LIGHT WEIGHT
WIND TUNNEL ENGINEERED
NOISE REDUCTION
SHELL INTEGRATED SPOILER
AIR FLOW
STREAMLINE
[ A ]
[ B ]
AS 03
RS 1
INTELLIGENT SHAPE
SUN VISOR
• No sacrifice in safety of front absorption layer
• Special lever for easy handling with gloves
• Sun visor anti-fog and anti-scratch coated
• 99% UV blocking
• Easy replaceable
• DIN EN1836 approved
VENTILATION / AERODYNAMIC
• Multiple air inlets and outlets
• Flush surface for less wind turbulence
• Integrated spoiler For best possible performance
E.Q.R.S. - EMERGENCY QUICK RELEASE SYSTEM
• Rescue system
• Pull to remove cheek pad
9
ADVANCED AERODYNAMICS
LIGHT WEIGHT
WIND TUNNEL ENGINEERED
NOISE REDUCTION
SHELL INTEGRATED SPOILER
AIR FLOW
STREAMLINE
[ A ]
[ B ]
AS 03
RS 1
FULLY REMOVABLE INTERIORS
OPTIMIZEDPROTECTION
MULTI DENSITY EPS-LINER
• Inner absorption liner with different densities
• Optimized protection grown from 50 years of experience
• Polyurethane pads and tactile combi-fabrics
• Soft and stable
• Ultra wicking, quick dry
MICRO RATCHET SYSTEM
• Interlocking mechanism 100% stainless steel
• No safety sacrifice by the use of plastic
• Handy to open and close
• Easy to adjust
FULL FACE H
ELMETS
10
AIRGT-
BRILLIANT YELLOW BLACK
LIGHT SILVER SHINE RED
WHITE
MATT DEEP GREY MATT BLACK
JOURNEY TC-5JOURNEY TC-1 JOURNEY TC-2
WANDERER TC-6WANDERER TC-5
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
11
AIRGT-
FULL FACE H
ELMETS
AIMF [ ]
F [ ]
SHELL SIZESXL-XXL
XXXL
LM
XXS-S
SHELL SIZES
SHOEI
12
SUPERIORTECHNOLOGY
SEPARATED SPOILER & TOP VENTS
UP TO 5 SHELL SIZES FOR PERFECT HOLD
6 PLY SHOCK ABSORBENTFIBER SHELL
• For best position and performance
• Flush surface, streamlined shape
• Controlled all around air flow reduces drag and lift
• Improved head stability at top speeds
• Ultimate fitting and comfort
• Sizes: XXS-S / M / L / XL-XXL / XXXL
• AIM+ Multi-Composite & high performance fiber layers
• High strength, light weight
• Optimal elasticity
A IR
OPTIMIZEDPROTECTION
PULL
13
E.Q.R.S. - EMERGENCY QUICK RELEASE SYSTEM
TECHN
OLO
GY
HIGH PERFORMANCEVENTILATION
SIDE AIR OUTLET SYSTEM
LOW PRESSURE AREA
REAR OUTLET
AIR SCOOP 3
LOWER AIR INTAKE
LoPAM
WARM AIR IS SUCKED OUT
FRESH AIR
DUAL EPS-LINER WITH DIFFERENT SHOCK ABSORBING LEVELS
FULLY REMOVABLE INTERIORS
• Inner shell with different densities
• Optimized protection
• Rescue system
• Pull to remove cheek pad
• Polyurethane pads and tactile Combi-Fabrics
• Soft and stable
• Ultra wicking, quick dry
Q&AMARQUEZWhich was your most difficult race of the season so far and why?Mugello has been the most complicated race this year
because we couldn’t find a good set up for the bike.
I rode at the limit during the whole race and a couple
of times I almost crashed. It was frustrating!
Which was your most exciting race of the season so far and why? My victory at the opening race of the championship in
Qatar was fantastic. After the difficulties I had during
the wintertime it was so good to be back!
What are your aims and goals for the upcoming season, where you will start beside your new teammate Dani Pedrosa in the MotoGP-class?The MotoGP class is very difficult with a lot of big
differences from the Moto2 class, mainly due to the
electronics on the bike. My goal for next season is to
learn the category and learn from the experience of Dani.
So I will learn, learn, learn and try my best. Step by
step. Anyway, for me a dream has already come true,
to be at the HRC team. Let’s see!
SEP. 2012 FOR SHOEI: MARC MARQUEZ, WORLD CHAMPION MOTO GP 2014?
15
X-SPIRIT I I
16
SAFETY
• Shell in AIM+Organic fibre, multi-composite and high-performance fibre in various layers for a shock-absorbent shell with optimum rigidity
• Modular EPS liner system with multi densities
Optimised protection through EPS elements with different shock-absorbing levels
• Mist-retardant CW-1 pinlock visor· With Q.R.S.A. (Quick Release Self Adjusting) technology, the visor has always a perfect fit to the beading· fast and simple exchange
• Double-D ringEasy to use and always perfectly adjusted
• Security systemE.Q.R.S. (Emergency Quick Release System) for easy helmet removal in case of an accident
WEARING COMFORT
• 4 different outer shell constructionsFor perfect fit and compact dimensions. Sizes: 1) XS-S, 2) M, 3) L, 4) XL-XXL
• 3D cheek pads and 3D centre pad For perfect fit
• Entirely detachable and washable inner liner
For easy cleaning
• Detachable and washable cheek pads· For easy cleaning· For individual adjustment with different sizes (31, 35, 39, 43 mm)
• Detachable and washable chinstrap cover
For better care
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• Inlet vents on the brow area, and chinFor fresh air supply
• Eight outlet vents in the upper head, rear of the head, neck and side
· Extract exhaled air· Prevent exhaustion
AERODYNAMICS
• Aero Edge Spoiler 2Controlled airflow around the helmet
• Spoiler separated from ventilation For best possible position and performance
PROFESSIONAL RACING HELMET
MARQUEZ2 TC-1
NEWDECOR
17
ACCESSORIES
• 12 different visors (see page 54)In individual tints
• Cheek padsIn different thicknesses for fine adjustment of fit (31, 35, 39, 43 mm)
• Chinstrap cover
• Centre padIn different thicknesses
• Breath Guard (see page 54)Comes with the helmet
• Chin Curtain (see page 54)Comes with the helmet
• Original SHOEI helmet bagComes with the helmet
FULL FACE H
ELMETS
18
X-SPIRIT I I
LASECA TC-4 LASECA TC-2
BAUTISTA TC-2BAUTISTA TC-1
WHITE
B-BOZ TC-8
REVERB TC-2
MATT BLACKBLACK
NEWDECOR
19
FULL FACE H
ELMETS
VERMEULEN5 TC-3
XR-1100
20
SAFETY
• Shell in AIM+Organic fibre, multi-composite and high-performance fibre in various layers for a shock-absorbent shell with optimum rigidity
• Modular EPS liner system with multi densities
Optimised protection through EPS elements with different shock-absorbing levels
• Mist-retardant CW-1 pinlock visor· With Q.R.S.A. (Quick Release Self Adjusting) technology, the visor has always a perfect fit to the beading· fast and simple exchange
• Double-D ringEasy to use and always perfectly adjusted
WEARING COMFORT
• 5 different outer shell constructionsFor perfect fit and compact dimensions. Sizes: 1) XXS-S, 2) M, 3) L, 4) XL-XXL, 5) XXXL*
• 3D cheek pads and 3D centre padFor perfect fit
• Entirely detachable and washable inner liner
For easy cleaning
• Detachable and washable cheek pads· For easy cleaning· For individual adjustment with different sizes (31, 33, 35, 37, 39, 41 mm)
• Detachable and washable chinstrap cover
For better care
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• Inlet vents on the brow area, and chinFor fresh air supply
• Four outlet vents at the rear of the head, neck
Extract exhaled air
AERODYNAMICS
• Tail Fin 3· Controlled airflow· Reduced stress for neck muscles
• Integrated spoilerFor best possible performance
SPORTYTOURING HELMET
* Only in black
21
ACCESSORIES
• 12 different visors (see page 54)In individual tints
• Breath Guard (see page 54)
• Cheek padsIn six different thicknesses for fine adjustment of fit (31, 33, 35, 37, 39, 41 mm)
• Chinstrap cover
• Centre padIn different thicknesses
• Whisper-Strip (see page 54)For advanced noise reduction
• Chin Curtain (see page 54)Comes with the helmet
• Original SHOEI helmet bagComes with the helmet
FULL FACE H
ELMETS
22
XR-1100
UNLIMITED RIDING PLEASURE
GLACIER TC-3
BRADLEY TC-1
23
TANGENT TC-1Art-Nr. *
FULL FACE H
ELMETS
ROLLIN‘ TC-5
TANGENT TC-1TANGENT TC-5
NEWDECOR
NEWDECOR
NEWDECOR
XR-1100
24
BEOWULF TC-6
MARQUEZ TC-1
CHROMA TC-1
TRANSMISSION TC-5 TRANSMISSION TC-2
NEWDECOR
NEWDECOR
25
FULL FACE H
ELMETS
HADRON2 TC-5
PLUGIN TC-4PLUGIN TC-8
CAVALLINO TC-1
PIOUS TC-5TRANSMISSION TC-8
TRANSMISSION TC-10
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
XR-1100
26
MATT DEEP GREYBLACK MATT BLACK
SKEET TC-2
SKEET TC-6
SKEET TC-4
MOIRE TC-5
WINE REDLIGHT SILVER PEARL GREY
CRYSTAL WHITE
NEWDECOR
NEWDECOR
NEWDECOR
27
SAFETYCOMFORTPASSION
FULL FACE H
ELMETS
QWEST
28
SAFETY
• Shell in AIM+Organic fibre, multi-composite and high-performance fibre in various layers for a shock-absorbent shell with optimum rigidity
• Modular EPS liner system with multi densities
Optimized protection through EPS elements with different shock-absorbing levels
• Mist-retardant CW-1 Pinlock visor· With Q.R.S.A. (Quick Release Self Adjusting) technology, the visor has always a perfect fit to the beading· Fast and simple exchange
• Double-D ringEasy to use and always perfectly adjusted
WEARING COMFORT
• 4 different outer shell constructionsFor perfect fit and compact dimensions Sizes: 1) XXS-XS, 2) S-M, 3) L, 4) XL-XXL
• Low weight of only 1,390 g(+/-50 g) for size M, to reduce neck muscle fatigue
• 3D centre pad, washableFor perfect fit
• Detachable and washable cheek pads· For easy cleaning· For individual adjustment with different sizes (31, 33, 35, 37, 39, 41 mm)
• Detachable and washable chinstrap cover
For better care
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• Inlet vents on the brow area, and chinFor fresh air supply
• Two outlet vents in the rear of the head and neck
· Extract exhaled air· Prevent exhaustion
AERODYNAMICS
• Integrated spoilerFor best aerodynamic performance
UNIVERSAL TOURING HELMET
LIGHT SILVERWHITE WINE RED MATT DEEP GREY
29
ACCESSORIES
• 12 different visors (see page 54)In individual tints
• Cheek padsIn different thicknesses for fine adjustment of fit (31, 33, 35, 37, 39, 41 mm)
• Chinstrap cover
• Breath guard (see page 54)
• Chin Curtain (see page 54)Comes with the helmet
• Original Shoei helmet bagComes with the helmet
FULL FACE H
ELMETS
BLACK MATT BLACK
NEOTEC
30
THE MOST VERSATILEFLIP UP HELMET
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS-liner system with two densitiesOptimized protection trough EPS elements with different shock absorbing levels
• Mist-retardant CNS-1 Pinlock systemFast and easy to change
• Micro ratchet systemEasy to handle, always perfect adjusted
• 360° Pivot Locking SystemMade from stainless steal
WEARING COMFORT
• QSV-1 sun visorDIN EN1836 approved
• 3 different outer shell constructionsFor perfect fit and compact dimensions1) XS-M, 2) L, 3) XL-XXL
• 3d-centerpad, detachable, washableFor pleasant wearing comfort
• Cheek pads detachable, washableFor better care and individual adjustment
• Chinstrap cover detachable, washableEasy to maintain and clean
• Ear padsTo reduce noise
• Prepared for Intercom installation
VENTILATION
• Multiple venting and extractionFor optimum ventilation performance
• Inlets on brow and chinFresh air supply guaranteed
• Two outlets at the rearTo exhaust warm air
AERODYNAMIC
• Integrated spoilerFor optimised aero dynamical performance
• Integrated “Vortex Generator”Active noise cancelling
31
FLIP UP HELM
ETS
ACCESSORIES
• Cheek pads In different sizes for individual adjustment
• Centre padIn different thicknesses
• BreathguardPrevents fogging of the visor (Included)
• ChincurtainReduces turbulences inside the helmet (Included)
• Original SHOEI helmet bagComes with the helmet
32
BOREALIS TC-3
ANTHRACITE METALLIC
NEWDECOR
33
NEOTEC
HIGHTECH FEELS NATURAL
WINE RED
LIGHT SILVER MATT BLACK BLACK
FLIP UP HELM
ETS
MATT DEEP GREY WHITE
NEWCOLOR
MULTITEC
34
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS liner system with two densitiesOptimised protection through EPS elements with different shock-absorbing levels
• Mist-retardant CX-1V pinlock visorWith safety locking mechanism and dual resistance visor seal, fast and simple exchange
• 360° Pivot Locking SystemFor secure chin section hold
• Double-D ringEasy to use and always perfectly adjusted
WEARING COMFORT
• 2 different outer shell constructionsFor perfect fit and compact dimensions Sizes: 1) XXS-L, 2) XL-XXL
• Low weight of only 1,560 g*(+/-50 g) for size M, to reduce neck muscle fatigue
• Washable 3D centre padFor pleasant wearing comfort
• Detachable and washable cheek pads with groove for spectacles
For better care
• Detachable and washable chinstrap cover
For better care
• Large recess close to the earSimplifies the installation of intercom systems
• Whisper-Strip and neck padFor noise reduction
• One-hand operation of flip up frontFor maximum convenience
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• 6 inlet vents on the brow and chinFor fresh air supply
• 2 outlet vents on the neckTo exhaust warm air
AERODYNAMICS
• Shell design with integrated spoiler Marked reduction of neck fatigue at high speeds and on long tours
• Chin section fits flush to the helmetFor optimised lateral airflows
SPORTYFLIP UP HELMET
* Not including accessories.** Not in conformity with the current E22/05 homologation requirement. In England and Greece, the helmet comes with a mellow smoke visor instead of the progressively tinted version.
LIGHT SILVERWHITE WINE REDPEARL GREY
35
ACCESSORIES
• Progressively tinted CX-1V Pinlock visor**
With a progressively tinted finish for optimum vision when the sun is low in the sky. Comes with the helmet
• 9 different visors (see page 54)In individual tints
• Cheek padsIn 7 different sizes for individual fine adjustment of fit (31, 33, 35, 37, 39, 41, 43 mm)
• Chinstrap Cover
• Whisper-Strip3 different sizes, depending on the helmet size: 1: XXS-XS, 2: S-L, 3: XL-XXL. Comes with the helmet
• Original SHOEI helmet bagComes with the helmet
FLIP UP HELM
ETS
BLACK MATT BLACKANTHRACITE METALLIC
J-CRUISE
FEEL URBAN
37
OPEN
FACE H
ELMETS
J-CRUISE
38
PREMIUM OPEN FACE HELMET
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS-liner system with multiple densitiesOptimized protection trough EPS elements with different shock absorbing levels
• CJ-2 VisorOptional Pinlock® mounting
• Micro ratchet systemEasy to handle, always perfect adjusted
WEARING COMFORT
• QSV-1 sun visorDIN EN1836 approved
• 3 different outer shell constructionsFor perfect fit and compact dimensions1) XS-M, 2) L, 3) XL-XXL
• 3d-centerpad, detachable, washableFor pleasant wearing comfort
• Cheek pads detachable, washableFor better care and individual adjustment
• Chinstrap cover detachable, washableEasy to maintain and clean
• Ear padsTo reduce noise
• Prepared for Intercom installation
VENTILATION
• Multiple venting and extractionFor optimum ventilation performance
• Inlets on browFresh air supply guaranteed
• Two outlets at the rearTo exhaust warm air
AERODYNAMIC
• Integrated spoilerFor optimised aero dynamical performance
WHITE SHINE REDBRILLIANT YELLOW LIGHT SILVER
NEW NEW NEWNEW
39
OPEN
FACE H
ELMETS
ACCESSORIES
• Cheek pads In different sizes for individual adjustment
• Centre padIn different thicknesses
• Original SHOEI helmet bagComes with the helmet
BLACKMATT BLACKMATT DEEP GREY
NEWNEW
NEW
RJ PLATINUM-R
40
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS liner system with two densitiesOptimised protection through EPS elements with different shock-absorbing levels
• Double-D ringEasy to use and always perfectly adjusted
WEARING COMFORT
• 3 different outer shell constructionsFor perfect fit and maximum compactness Sizes: 1) XS-M, 2) L, 3) XL-XXL
• Low weight of only 1,110 g(+/-50 g) for size M, to reduce neck muscle fatigue
• 3D centre pad, detachable and washableFor perfect fit and easy cleaning
• Detachable and washable cheek pads with groove for spectacles
For better care
• chinstrap cover, detachable and washable
For better care
• Large recess close to the earSimplifies the installation of intercom systems
• Additional collar underneath the helmetTo reduce noise
• Detachable shield
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• 2 closable inlet vents and 2 closable outlet vents integrated in the shell
For fresh air intake and warm air exhaust
AERODYNAMICS
• Streamlined, compact shapeTo minimise drag
• Spoiler integrated in the shellReduces neck fatigue, even at high speeds, and enables the controlled dissipation of air turbulence
COMPACTOPEN FACE HELMET
BLACK ANTHRACITE METALLIC LIGHT SILVER WHITE
41
ACCESSORIES
• Cheek padsIn 7 different sizes for individual fine adjustment of fit (31, 33, 35, 37, 39, 41, 43 mm)
• Chinstrap cover
• Centre pad
• Original SHOEI helmet bagComes with the helmet
OPEN
FACE H
ELMETS
MATT BLACK
S-20
42
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
• Goggle holderTo hold the goggles in place
WEARING COMFORT
• 2 different outer shell constructionsFor perfect fit and compact dimensions Sizes: 1) XS-M, 2) L-XL
• Low weight of only 1,020 g(+/-50 g) for size M, to reduce neck muscle fatigue
• Washable interior liner
• Detachable shield
OPEN FACE HELMET
BLACK MATT BLACK LIGHT SILVER
43
OPEN
FACE H
ELMETS
HORNET-DS
44
SAFETY
• Shell in AIM+Organic fibre, multi-composite and high-performance fibre in various layers for a shock-absorbent shell with optimum rigidity
• Modular EPS liner system with two densities
Optimised protection through EPS elements with different shock-absorbing levels
• Mist-retardant C-49 pinlock visorDual resistance visor seal, adjustable to 4 positions, easy to exchange
• Double-D ringEasy to use and always perfectly adjusted
WEARING COMFORT
• 4 different outer shell constructionsFor perfect fit and compact dimensions Sizes: 1) XXS-XS, 2) S-M, 3) L, 4) XL-XXL
• Low weight of only 1,480 g(+/-50 g) for size M, to reduce neck muscle fatigue
• 3D centre padFor perfect fit
• Entirely detachable and washable inner liner
For easy cleaning
• Detachable and washable cheek pads· For easy cleaning· For individual adjustment with different sizes (31, 35, 39, 43 mm)
• Detachable and washable chinstrap cover
For better care
• Chin Curtain HTo reduce air turbulence in the helmet
VENTILATION
• Multiple venting and extractionFor optimum ventilation
• Inlet vents in the upper head area, forehead and chin areas
For fresh air intake
• 2 outlet vents integrated in the Air Stabilizer, 2 in the neck area
For the extraction of warm air
• Separate visor ventilationFor perfect visibility
• Nose CoverAggressively-shaped front with filter and defroster
AERODYNAMICS
• Streamlined, compact shapeTo minimise drag
• Air-Stabilizer 3To reduce drag and lift, especially at high speeds
ON- AND OFF-ROAD HELMET
45
ACCESSORIES
• 2 different visors (see page 54)
• Cheek padsIn different thicknesses for fine adjustment of fit (31, 35, 39, 43 mm)
• Chinstrap cover
• Centre pad
• Chin Curtain (see page 54)Comes with the helmet
• Including covers for the visor mechanismIf the helmet is used without shield
• Original SHOEI helmet bagComes with the helmet
OFF-R
OAD
HELM
ETS
HORNET-DS
46
MATT DEEP GREY MATT BLACK
LIGHT SILVER
SONORA TC-6
SONORA TC-8 SONORA TC-5
CRYSTAL WHITE BLACK
HORNET-DS
47
DOUBLE ACTION
OFF-R
OAD
HELM
ETS
VFX-W
48
SAFETY
• Shell in AIM +Organic fibre, multi-composite and high-performance fibre in various layers for a shock-absorbent shell with optimum rigidity
• EPS liner system with two densitiesOptimised protection through EPS elements with different shock-absorbing levels
• E.Q.R.S. (Emergency Quick Release System) Simplifies helmet removal by removing the cheek pads in the event of an accident
• Double-D ringEasy to use and always perfectly adjusted
• Including mud guard
WEARING COMFORT
• 4 different outer shell constructionsFor perfect fit and compact shell,sizes: 1) XS, 2) S-M, 3) L, 4) XL-XXL
• Detachable and washable 3D Max-Dry cheek pads
· In differnt sizes for perfect fit (31, 35, 39 mm)· Breathable and moisture absorbent
• Detachable and washable 3D Max-Dry centre pad
· For simple cleaning· Breathable and moisture absorbent
VENTILATION
• Multiple venting and extraction· For optimum ventilation · Especially easy to clean
• Several intake vents on the brow area and on the upper head area
For fresh air intake
• Several outlet vents in the spoiler and on the neck
To exhaust warm air
AERODYNAMICS
• Special shell constructionRadical sporty design with integrated spoilers for optimised aerodynamics and performance
• Aggressively-shaped face guard For reduced drag
PROFESSIONALOFF-ROAD HELMET
BLACKWHITE MATT BLACK
49
ACCESSORIES
• 3D cheek padsIn different thicknesses for fine adjustment of fit (31, 35, 39 mm)
• ShieldAvailable in various colours and decors
• Chinstrap cover
• Centre padIn different thicknesses
• Nose coverAvailable in various colours and chrome finishes
• Original SHOEI helmet bagComes with the helmet
OFF-R
OAD
HELM
ETS
VFX-W
50
DISSENT TC-2
DISSENT TC-7 DISSENT TC-1
DISSENT TC-6 KRACK TC-10
K-DUB3 TC-1
K-DUB3 TC-10 K-DUB3 TC-2
KRACK TC-2
KRACK TC-11
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
VFX-W
THEORIGINAL
51
OFF-R
OAD
HELM
ETS
VFX-W
52
GRANT TC-1
WERX TC-5WERX TC-4WERX TC-2 GRANT TC-4
GRANT TC-2
GRANT TC-5
SALUTE TC-2
WERX TC-1 WERX TC-8
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
NEWDECOR
TR-3
+
53
SAFETY
• Shell in AIMOrganic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity
VENTILATION
• Ventilation with separate, closable inlet and outlet vents
WEARING COMFORT
• 2 different outer shell constructions For perfect fit and compact dimensions, sizes: 1) XS-M, 2) L-XL
• Low weight of only 1,050 g(+/-50 g) for size M, to reduce neck muscle fatigue
• Detachable and washable interior liner For simple cleaning
• Detachable and height-adjustable shieldFor individual adjustment
ACCESSORIES
• Cheek pads
• Chinstrap cover
• Centre pad
• Original SHOEI helmet bagComes with the helmet
TRIAL-HELMET
OFF-R
OAD
HELM
ETS
WHITE
NEOTEC CNS-1 1 + 8 F E – QSV-1 3
GT-AIR CNS-1 1 + 8 F tba – QSV-1 3
QWEST CW-1 1–10 F D – CWF-1 (!) 1–3 + 8
X-SPIRIT II CW-1 1–10 G D – CWF-1 (!) 1–3 + 8
XR-1100 CW-1 1–10 F D – CWF-1 (!) 1–3 + 8
X-SPIRIT CX-1V 1–10 D B – CF-1V (!) 1–3
MULTITEC CX-1V 1–10 – MLTCHI •**
XR-1000 CX-1V 1–10 B X8 • CF-1V (!) 1–3
RAID II CX-1V 1–10 B X8 • CF-1V (!) 1–3
J-CRUISE CJ-2 1+8 – – – QSV-1 3
J-WING CJ-1 1–5 + 9 – – –
HORNET-DS C-49 1+2 – H –
Z-ONE CX-1 1–8 E Aéro – CF-1 (!) 1–3
SYNCROTEC II CX-1 1–8 – C –
54
!MODEL 7***
high definition orange
MODEL 5***
spectra blueMODEL 1clear
MODEL 8Pinlock
MODEL 2mellow smoke
MODEL 9***
progressive tinted(only CX-1V & CW-1)
MODEL 3***
dark smoke
MODEL 10***
spectra rainbow (only CX-1V & CW-1)
MODEL 4***
spectra silver
RACING VISOR (!)CF-1, CF-1V & CWF-1: clear, mellow o. dark smoked, high definition yellow (only CWF-1)
MODEL 6***
spectra gold
Helmets Visor & Model Breath- Chin Whisper- Guard Curtain Strip
(!) for racing CF-1/CF-1V/CWF-1 – for the use of tear-off foils* Illustrations can differ, depending on the model.
** Three sizes, depending on the helmet size: 1) XXS-XS, 2) S-L, 3) XL-XXL.
*** Not in conformity with the current E22/05 homologation requirement.
AIRMASK*(only X-Spirit II, X-Spirit)
TEAR-OFFS (!)Tear-off foils for racing visorsCF-1, CF-1V, CWF-1
BREATH GUARD*(repels breath)
CHIN CURTAIN*prevents air turbulence and helps reduce noise)
WHISPER-STRIP*(only for Raid II, XR-1100, XR-1000 and Multitec)
Caveat emptor: It is possible that during
the reproduction process slight deviations in
colour and graphic design may occur. For these
deviations, any warranty by SHOEI is expressly
excluded.
Last revised: September 2012
Details of scope of delivery, technical data, design,
features, material and external appearance were
correct when the brochure went to print and are
therefore non-binding. Errors excepted. Subject
to modification.
All rights reserved. This publication is copyright
protected. All rights are reserved, in particular
those pertaining to the translation, reprinting,
re-use of illustrations, broadcasting, reproduction
by photocopying machines or similar means and
storage in databases. Reproductions and other
measures which infringe upon rights are only
admissible subject to the prior written consent of
the copyright holder.
CW-1 Visor Patent EP 1 856 999 A2.
Design: Bionic-Systems.com, Düsseldorf
Content: SHOEI (Europa) GmbH, Düsseldorf
Photos: SHOEI, Nico Schneider,
Patrick Krüger aka Kaba Klaus, Frank Hoppen,
Garth Milan, Martin Donat
You can find further information and a list of
distributors at:
www.shoei-europe.com
!
VISORS
ACCESSORIES
EXTRA
S / SSC
SHOEI SAFETY
CONCEPT
SHOEI SAFETY CONCEPT: DELUXE SAFETY.The SHOEI Safety Concept (SSC) surpasses statutory safety standards by far. It was developed to ensure both maximum head protection and optimum wearing comfort because a relaxed ride makes an important contribution to the rider‘s safety. That‘s why the SHOEI Safety Concept addresses both passive and preventative protection.
PASSIVE SAFETYAll SHOEI helmets have optimum impact absorption, material rigidity and dimensional stability. Regular, strict quality inspections that go far beyond the standard required by law guarantee the first-rate quality of each helmet.
ACTIVE SAFETYPerfect fit, optimised ventilation, top aerodynamics, effective noise reduction, excellent visibility and low weight guarantee maximum wearing comfort at all speeds for even more riding pleasure.
SH
OE
I
2
01
3
SHOEI (EUROPA) GMBH
EICHSFELDER STRASSE 27
40595 DÜSSELDORF
GERMANY
T +49 (O) 211 - 17 54 36 32
F +49 (O) 211 - 17 54 36 66
WWW.SHOEI-EUROPE.COM