Download - Single Tank Liquid Level Monitor - King Gage
Effective: July 2015 Supplement 1500-51
Marsh Bellofram Group of Companies
8019 Ohio River Blvd. Newell, WV 26050 U.S.A.304-387-1200 • 800-242-8871 • Fax: 304-387-4417
marshbellofram.com • king-gage.com
Single Tank Digital Display ■ Calculates volumetric tank inventory
■ Dual line high visibility LED display
■ Use for vertical or horizontal tanks
The new KING-GAGE® LP1 Tank Level Indicator com-bines intelligent signal processing and data acquisition for seamless integration in process control. This high precision digital tank level indicator will provide con-tinuous measurement of liquid inventory in storage or processing tanks. It can calculate tank inventory on the basis of hydrostatic pressure (created by liquid depth) or from direct level measurement (such as radar or ultrasonic).
The LP1 single tank digital indicator features a dual line LED providing full 6-digit display in large 0.6” (15mm) characters for easy viewing with a smaller second line identifying readout units. Tank level is shown directly in the unit of weight or volume (as specified). You get ac-curate level or tank inventory regardless of tank shape (even horizontal tanks with dish ends).
The LP1 indicator accepts the proportional 4-20 mA signal from a tank level transmitter. LP1 indicators express tank level directly in engineering units. The indi-cator references a capacity profile to correlate transmit-ter output to actual tank geometry. The indicator then formats the resulting value directly as the total weight or volume of liquid in the tank. All application param-eters are factory preprogrammed (based on supplied application data) into nonvolatile memory. This means there are no user conversion factors involved or scaling points to enter during installation.
The KING-GAGE LP1 digital tank level indicator em-ploys a 24-bit A/D architecture for better than ±0.03% accuracy (± 1 count). Consistent and repeatable level measurement ensures better control of your process and improved inventory reporting.
24 Vdc Output (Transmitter Excitation)The LP1 tank indicator provides an isolated 24Vdc transmitter power supply over the 2-wire signal loop. This simplifies system installation and ensures proper excitation of the level transmitter even over substantial cable runs.
Modbus Digital Communications (Option)You can use the LP1tank level indicator to integrate into your process control scheme through digital serial com-munications. This widely used Modbus RTU protocol is supported by a large number of products and vendors in industrial control. (Requires the serial communication option.)
®®KING-GAGE LP1Tank Level Indicator
® KING-GAGE and the KE emblem are registered trademarks of ATC King Engineering, Newell, WV U.S.A.
All specifications are subject to change without notice. LTKE1500-51
www.king-gage.com
Specifications
Input Signal4–20 milliamperes (mAdc)Input current limiting; auto reset internal fuse
Display TypeDual line alphanumeric 0.6” LED 6-digit (displayed value) 0.4” LED 6-character units designator
Accuracy±0.03% calibrated span
Resolution24-bit A/D conversion, ±1 count
Temperature Range-40° to 140°F/-40° to 60°C (operating range)
Power Requirements85-265 Vac 50/60 Hz
Voltage Output24 Vdc (@ 200 mA)
RatingsUL listedCEIP65, NEMA 4X
LP1 Digital Indicator Model 4650-1
KING-GAGE® — LP1 Digital Tank Level Indicator Supplement 1500-51
60000GALS
60000GALS
®
KING ENGINEERINGNewell, West Virginia U.S.A.
LP1 DISPLAYModel 4650-1
11.75 in298 mm
6.0 in152 mm
13.78 in350 mm
9.0 in229 mm
3.31 in84 mm3/4 NPT
(3) Places
6.87 in174 mm
Dual Line LED Display