SIXTEENTH STATEWIDE CONFERENCE
ON LOCAL BRIDGES
OCTOBER 21‐22, 2009
SYRACUSE, N.Y.
Presented By
NYS DEPARTMENT OF TRANSPORTATION
NYS COUNTY HIGHWAY SUPERINTENDENTS ASSOCIATION
FEDERAL HIGHWAY ADMINISTRATION
CORNELL LOCAL ROADS PROGRAM
ASSOCIATION FOR BRIDGE CONSTRUCTION & DESIGN ‐ WESTERN NY CHAPTER
ASSOCIATION FOR BRIDGE CONSTRUCTION & DESIGN ‐ EASTERN NY CHAPTER
Sixteenth Statewide Conference on Local Bridges Syracuse, New York ‐ October 21‐22, 2009
Handbook Contents:
Conference Organization Chart & Committee Membership
Agenda
Conference Sessions: Session 1 ‐ General Topics Session 2 ‐ Featured Region ‐ NYSDOT, Region 1 Session 3 ‐ General Topics Session 4A ‐ Local Agency Forum Session 4B ‐ General Topics Session 5 ‐ Maintenance and Repairs Session 6 ‐ General Topics
Appendix:
NYSDOT Featured Region NYSDOT Region and County Map Statewide Conference on Local Bridges 2010: Program Chair Info How to Access Conference Presentations
Sixteenth Statewide Conference on Local Bridges
Syracuse, New York ‐ October 21‐22, 2009
Steering Committee
George A. Christian, Chairman
Cornell Local Roads Program
Lynne Irwin David Orr
Program Committee
Paul Campisi, Chairman Adrienne LiBritz‐Cooley, 2010 Chairperson
Logistics Committee
Scott Lagace Donna Simons
Training / Communications Subcommittee Rohit Dagli, Chairman
Sixteenth Statewide Conference on Local Bridges Syracuse, New York ‐ October 21‐22, 2009
Steering Committee
George A. Christian, Chairman Scott Lagace Peter Weykamp Lorraine Mihaljevic Lynne Irwin David Orr Donna Simons Mark Laistner Earl Dubin Christopher Day Willy Grimmke Thomas Hack Guy James
NYSDOTNYSDOT NYSDOT NYSDOT Cornell Local Roads Program Cornell Local Roads Program Cornell Local Roads Program ABCD FHWA Ontario County Washington Co., DPW City of Rochester Allegany County
518‐457‐6827 518‐485‐1386 518‐457‐8485 315‐785‐2338 607‐255‐8033 607‐255‐8465 607‐255‐5437 585‐427‐8888 ext. 257 518‐431‐4125 ext. 229 585‐396‐4000 518‐746‐2440 585‐428‐6852 585‐268‐9230
Cornell Local Roads Program
Lynne Irwin Cornell Local Roads Program 607‐255‐8033 David Orr Cornell Local Roads Program 607‐255‐8465
Program Committee
Paul Campisi, Chairman Adrienne LiBritz‐Cooley
NYSDOTNYSDOT
518‐457‐7822 518‐457‐4533
Logistics Committee
Scott Lagace Donna Simons
NYSDOTCornell Local Roads Program
518‐485‐1386 607‐255‐5437
Training/Communication Subcommittee
Rohit Dagli, Chairman NYSDOT 518‐485‐7238
Sixteenth Statewide Conference on Local Bridges Syracuse, New York ‐ October 21‐22, 2009
Featured Region:
NYSDOT Region 1 ‐ Schenectady
Albany
Essex
Greene
Rensselaer
Saratoga
Schenectady
Warren
Washington
Sixteenth Statewide Conference on Local Bridges Syracuse, New York ‐ October 21‐22, 2009
Statewide Conference on Local Bridges 2010 Program Chair
For program suggestions for 2010, please contact Adrienne Libritz‐Cooley
at the following:
Adrienne LiBritz‐Cooley 50 Wolf Road, POD 4‐3 Office of Structures
New York State Department of Transportation Albany, NY 12232
Phone (518) 457‐4533 [email protected]
HOW TO ACCESS CONFERENCE PRESENTATIONS: ● Go to NYSDOT website – www.dot.state.ny.us ● Click on “About NYSDOT” ● Click on "Divisions" ● Select "Office of Structures" ● Click on "Events/News"
● Click on "Reviews of Statewide Conference on Local Bridges"
● Click on the year desired
● Click on "Presentations"
Adobe Reader is required to view these presentations.
Rohit Dagli, P.E.
NYSDOT, Office of Structures 50 Wolf Road, POD 43 Albany, NY 12232
Phone: (518) 485‐7238 [email protected]
Synopsis:
The Statewide Conference on Local Bridges’ Steering Committee instructed the Training and Communication Subcommittee to focus on forming an effective partnership among NYSDOT, local highway officials, and the Cornell Local Roads Program to identify training and communication opportunities which will strengthen and clarify technical, administrative, and procedural linkages among the state’s bridge partners. To attain this, the subcommittee, which comprises a cross section of local, state, federal, consultant and academic professionals across the state has surveyed the local bridge community and has identified areas where training can help local bridge owners manage and maintain their structures. The subcommittee update will discuss yesterdays training sessions, evaluations by attendees and future direction of training workshops in coming years.
About the Presenter:
Rohit Dagli is a Project Engineer in the Design Bureau of the Office of Structures, of the NYSDOT. Rohit has been with the Bridge Design Bureau since joining the Department in 1987. He graduated from L. D. College of Engineering, India with a Bachelor of Engineering in Civil Engineering in 1979. Since joining the Bridge Design Bureau Rohit has designed different types and varieties of bridges including arch, truss, steel, concrete, and precast structures. Rohit is also actively involved in training activities in the Office of Structures and coordinates training for the Statewide Local Bridge Conference. Rohit can be contacted at the address above if you have any questions or comments concerning the training for Statewide Local Bridge Conference.
SESSION 1.1
Training Subcommittee Update
Michael Davies, P.E. Structural Engineer
FHWA – Technology Services (HTS‐NY) Leo W. O’Brien Federal Bldg., Suite 719
Clinton Ave. & North Pearl St. Albany, NY 12207
Phone: (518) 431‐4125 [email protected]
Synopsis:
This presentation will discuss issues occurring both at the FHWA’s New York Division and Nationwide offices, which could impact the local bridge program in New York State. These issues include review of projects funded with Federal stimulus package money and review of state and local preventative maintenance bridge projects. Additionally, reauthorization of a new federal highway bill will be discussed as well as efforts to streamline the federal aid process.
About the Presenter:
Michael Davies became Assistant Division Administrator of the Federal Highway Administration’s (FHWA) New York Division in July of 2009. In this capacity, he manages the day‐to‐day operations of the New York Division, and assists the Division Administrator in implementation and oversight of FHWA’s policies, objectives, and priorities. He provides leadership and guidance to the FHWA NY Division staff who administer New York’s $1.2+ billion annual federal‐aid transportation budget. Mr. Davies served for 3 years as the Operations Team Leader for FHWA’s Colorado Division. Prior to his Colorado assignment, he served for 4 years as the Safety, Traffic Operations and ITS Program Manager in the FHWA‐Maine Division. Before joining the FHWA Michael was a Project Manager and Team Leader with the Maine Department of Transportation. Michael has over 24 years of transportation engineering experience. He has a Bachelor of Science degree in Civil Engineering from the University of Alaska and a Master of Science degree in Civil Engineering from the University of Maine. Although Michael grew up in Troy, NY, he does not follow the NY Yankees. He is a fan of two baseball teams, the Boston Red Sox and whoever beats the New York Yankees.
SESSION 1.2
FHWA Update
Diane L. Kenneally, P.E. Director, Local Programs Bureau
NYSDOT 50 Wolf Road, POD 5‐2
Albany, NY 12232 Phone: (518) 457‐4059
Synopsis:
The presentation will include an update on the Local Programs Bureau, the American Recovery and Reinvestment Act implementation, and Procedures for Locally Administered Federal Aid Projects (PLAFAP). Also included are activities underway by FHWA’s New York Division as well nationally in their oversight role. Implementation of Training Special Provisions on federal aid contracts will be discussed.
OUTLINE
• Local Programs Bureau Overview • American Recovery and Reinvestment Act (ARRA) and Transportation • FHWA National Team Review – ARRA • Manual Revisions
o Four focus areas • Training Special Provisions
About the Presenter:
Diane Kenneally, is the Director of the Local Programs Bureau at NYSDOT which administers State and Federal Aid programs available to municipalities, non‐governmental organizations and other State Agencies. These programs include State Aid Programs: CHIPS, Multi‐modal Program and Member Items as well as Federal Aid guidance for the Safe Routes to School (SRTS) Program, Transportation Enhancement Program (TEP), Emergency Relief (ER) Program and the Procedures for Locally Administered Federal Aid Projects Manual.
Diane began her career at NYSDOT as a construction inspector working summers during college. She joined NYSDOT as a Junior Engineer in the Design Services Bureau, designing and developing highway and bridge projects, eventually leading a design squad for 3 years. Diane has worked as an Assistant to a number of Executives including the Chief Engineer and
SESSION 1.3
Local Programs Bureau Update
Director of Operations. She led the Local Projects Team that developed the NYSDOT Procedures for Locally Administered Federal Aid Projects Manual.
Diane has a B.S. in Civil Engineering from Rensselaer Polytechnic Institute and a B.S. in Physics from the State University College at Oneonta. Since 1996, she has been an adjunct lecturer teaching Highway Engineering at Rensselaer Polytechnic Institute.
APPRENTICE / TRAINING / LABOR / CIVIL RIGHTS PROVISIONS IN LOCALLY ADMINISTERED FEDERAL AID CONTRACTS
At this time, the only training provision approved by the Federal Highway Administration (FHWA) for inclusion in FHWA funded contracts in New York State, is NYSDOT’s Training Special Provisions (TSP) issued by the NYSDOT’s Engineering Instruction, EI 06‐018. The purpose of the Training Special Provisions is to both provide for workforce development and address under‐representation of minorities and women in the transportation construction industry, while not restricting competition in the bidding process.
A number of municipalities have enacted local laws and regulations, in a variety of forms, which require their contractors to have apprentice programs for their workforce. However, depending upon how they are written and implemented, these requirements may not meet all of the specific criteria mandated by federal law. Federal regulations require that the State highway agency (NYSDOT) and the Federal Highway Administration (FHWA) must approve all Training Special Provisions before they may be included in a federal aid contract. As noted above, the only approved training provision is NYSDOT’s TSP. Any other provision would require NYSDOT and FHWA review and approval / disapproval on a case‐by‐case basis. This requirement is included in the Procedures for Locally Administered Federal Aid Projects (PLAFAP) Manual, Chapter 12, Section 12.4.1.4. With the submission of NYSDOT’s On the Job Training Plan for 2009 to FHWA, which added local sponsors as potential users, NYSDOT’s Training Special Provisions are the only provisions for training/apprenticeship permitted for use on Locally Administered Federal Aid Contracts, but they will not be mandated. Various chapters in the PLAFAP Manual are under revision and, when finalized, will reflect this change.
For State‐let projects, NYSDOT design guidance suggests inclusion of the Training Special Provisions (TSP) on projects greater than $5,000,000. The use of TSP is considered on projects between $1,000,000 and $5,000,000. NYSDOT does not use TSP on projects with engineer’s estimates less than $1,000,000 as these projects usually do not employ enough workers in a specific trade to warrant an apprentice. Regardless of the amount, the inclusion should also be based on the likelihood of the contract containing meaningful and effective training opportunities. (See EI 06‐019.) These criteria are applied by NYSDOT to State‐let contracts. They are not mandated for contracts let by local sponsors. If a local sponsor can verify that a project with an engineer’s estimate less than $1,000,000 meets the TSP criteria, the sponsor may include the TSP in the proposed plans, specifications and estimate (bid documents), but must also include an explanation for review and approval by NYSDOT and the Federal Highway Administration (FHWA).
NYS Department of Labor (NYSDOL) does not approve Training Special Provisions for FHWA funded projects. NYSDOL registers apprenticeship programs. If contractors are looking for information regarding approved apprenticeship programs, entities that have registered programs, etc., they should contact NYSDOL for that information. NYSDOT is responsible for review of contract provisions for compliance with FHWA policies.
ACTION STEPS
NYSDOT’s Training Special Provisions may be included in FHWA‐funded contracts, but all other training provisions must be removed, as they have not received approval from FHWA. Contractors may use NYSDOL approved apprenticeship programs to fulfill NYSDOT’s Training Special Provisions.
If a Sponsor has received bids for any contracts where a non‐NYSDOT training provision has been incorporated into the bid documents, the project must be re‐advertised and new bids solicited (a two week ad may be sufficient for this purpose). NYSDOT’s Training Special Provisions may be included by amendment to the bid documents. The apparent low bidder will notify the Sponsor how it intends to fulfill the NYSDOT’s Training Special Provisions included in the bid documents.
A Sponsor may pursue approval of its own Training Special Provisions. Any new Training Special Provisions will require NYSDOT review and recommendation to the FHWA, which has the responsibility to approve all training special provisions on FHWA‐funded projects. All Training Special Provisions must comply with Title 23 Code of Federal Regulations (23 CFR) Part 230.111. The review and approval process is extensive; the proper amount of time should be allowed to obtain approval prior to the advertisement of a construction project. Contact your Regional Local Project Liaison (RLPL) to begin this process.
Christopher Day, P.E. Meghan Morales Bridge Engineer Associate Ontario County DPW Wiss, Janney, Elstner, Associates Inc. (WJE)
2962 County Road No. 48 330 Pfingsten Road Canandaigua, NY 14424 Northbrook, Illinois 60062 Phone: (585) 396‐4282 Phone: (847) 753‐6318
[email protected] [email protected]
Synopsis:
The County received yellow structural flags for two bridges with diagonal cracking near the bearings on the fascia girders at both ends of the bridges. The single span bridges are constructed of adjacent prestressed, precast concrete box beams with cast‐in‐place concrete decks. The span lengths of the bridges are 84 feet and 99 feet. The County’s initial assessment of the structures did not reveal the root cause of the cracking. WJE was hired to evaluate the bridges and investigate the cracking. The presentation will focus on WJE’s evaluation procedures including design review, field investigation, full scale load testing, load rating and maintenance recommendations.
About the Presenters:
Christopher Day received his BS degree in Civil Engineering from the State University of New York at Buffalo in 1994. Chris worked in consulting engineering designing and managing bridge projects for various clients throughout the northeast. In 2005, Chris began working as a bridge engineer for the Ontario County Department of Public Works. His principal duties include management of the County’s bridge and large culvert inventory, bridge and culvert design, oversight of bridge construction and maintenance and administering federal aid bridge projects. Meghan Morales has a Bachelors degree in Civil Engineering from the University of Notre Dame in South Bend, Indiana and an MS in Structural Engineering from the University of Illinois Urbana‐Champaign. Since joining Wiss, Janney, Elstner Associates, Inc. (WJE) in 2005, Meghan has been involved extensively in public works projects which include structural investigation, condition assessment, load rating, structural rehabilitation and new design of various bridges, tunnels, and culverts. Some of her recent projects include the Central Artery/Tunnel (“Big Dig”) investigation in Boston, Franklin Avenue Bridge rehabilitation design in Minneapolis, and the Old Elm Road new bridge design in Lake Forest, Illinois. Meghan has significant experience with structural analysis software programs, including extensive nonlinear finite element modeling of both concrete and steel structures.
SESSION 1.4
Investigation of Two Prestressed Concrete Box Beam Bridges with Diagonal Cracking
Stanley Gee
Acting Commissioner NYSDOT, Office of the Commissioner
50 Wolf Road, 6th Floor Albany, NY 12232
Phone: (518) 457‐4422 [email protected]
About the Presenter:
Stanley Gee was appointed by Governor David Paterson as Acting Commissioner of the New York State Department of Transportation (NYSDOT) effective May 8, 2009. Prior to assuming the position of Acting Commissioner, Stan served as the Executive Deputy Commissioner of NYSDOT. As the Executive Deputy Commissioner, Stan functioned as the Chief Operating Officer of the Department. Under his leadership, Stan focused on improving the performance and accountability of the Department and communicating results to its customers and employees.
At the national level, Stan is a member of the Transportation Research Board’s Second Strategic Highway Research Program Oversight Committee, and Vice‐Chair of the I‐95 Corridor Coalition’s Executive Board. Stan was recently appointed as Chair of the American Association of State Highway and Transportation Officials’ Subcommittee on Organizational Management.
Stan came to New York State government in 2007 after a distinguished 36‐year career with the Federal Highway Administration, an agency within the U.S. Department of Transportation. His most recent position was as the Massachusetts Division Administrator, where he led a multi‐disciplinary staff overseeing the Commonwealth’s $550 million annual Federal‐Aid Highway Program, which included constructing the country’s largest and most complex transportation project, the Central Artery/Tunnel Project (“The Big Dig”).
Stan began his career in transportation as a summer construction inspector with the State Department of Transportation while he attended the Rensselaer Polytechnic Institute, where he obtained his B.S. in Civil Engineering.
SESSION 1.5
NYSDOT Update
Thomas Hoffman, P.E.
Regional Structures Engineer NYSDOT – Region 1 328 State Street
Schenectady, NY 12305 Phone: (518) 388‐0317
Synopsis:
Tom Hoffman will introduce the Featured Region session and share information about Region One of the New York State Department of Transportation.
About the Presenter:
Tom Hoffman received his BS degree in Civil Engineering from Rensselaer Polytechnic Institute in 1991 with a focus in structural engineering. He joined NYSDOT Region One Bridge Design in 1992, and has worked his entire DOT career in the Regional Office. Tom has designed and managed a variety of steel and prestressed concrete bridge replacement and rehabilitation projects. Tom currently serves as the Region One Structures Engineer, overseeing bridge projects in the eight county region based in Schenectady. Part of his duty is in assisting the Regional Planning office in developing the bridge program, reviewing local federally aided bridge projects, and granting concurrence on the use of Federal funds. He is a licensed Professional Engineer in the State of New York.
SESSION 2.1
Introduction to Region 1
Wayne E. Bonesteel, P.E. Eric L. Alexopoulos, P.E. Deputy County Engineer Structural Engineer Rensselaer County Erdman Anthony
124 Bloomingrove Drive 317 Brick Church Road Troy, New York Troy, New York 12180 Phone: (518) 283‐0973 Phone: (518) 279‐0505 [email protected] [email protected]
Synopsis:
Red flags issued on local bridges are at record high numbers. This is the result of continued aging of structures and increased traffic volumes. It is necessary for local bridge owners to develop innovative, fast, and economical solutions to correct red‐flagged conditions. Prior to the replacement or major rehabilitation of these aging structures, immediate corrective action is required to safely keep them in service. This presentation will provide some examples of red flag conditions and the cost effective corrective measures taken to remedy them.
About the Presenters:
Wayne Bonesteel has a Bachelors degree in Civil Engineering from Rochester Institute of Technology. He was appointed Deputy County Engineer for Rensselaer County in 2008. He is responsible for the County’s Bridge Program which includes oversight of bridge capital projects and bridge maintenance projects. He has 24 years of experience in bridge design and construction projects mostly with consulting engineering companies. He is a licensed engineer in New York, Massachusetts and Connecticut. Eric Alexopoulos graduated with a Bachelor of Science degree in Civil Engineering in 1993 from Rensselaer Polytechnic Institute. He joined Erdman Anthony in 2002 and is currently the Structural Team Leader for the Albany Office. Mr. Alexopoulos is a licensed Professional Engineer in New York and Maine. He has over 16 years of engineering design and management experience in commercial, industrial, and municipal structures. Mr. Alexopoulos serves as the project manager for the County Route 111 Bridge replacement and Southeast Hollow Road Bridge rehabilitation projects.
SESSION 2.2
Red Flag Repairs on Rensselaer County Bridges
Willy Grimmke, P.E.
County Superintendent Washington County Department of Public Works
383 Broadway Fort Edward, NY 12828 Phone: (518) 746‐2440
Synopsis:
Bridges are, by their very nature, supposed to be durable structures that we anticipate will last many years despite being exposed to the elements and relatively harsh conditions. Local bridges can meet or exceed their design life, if properly maintained. In time of increasingly tight maintenance budgets, bridges that require low maintenance to meet their design life are becoming more of the norm. This presentation will show a number of details from existing bridges which tend to be maintenance intensive, and some alternative approaches which should be less so.
About the Presenter: Willy Grimmke has a Bachelor of Science degree in Civil and Environmental Engineering from Clarkson University and a Master of Science Degree from Rensselaer Polytechnic Institute. He has served as the Superintendent of Public Works with Washington County since early 1997. Washington County Department of Public Works is the proud owner of approximately 120 bridges which require periodic maintenance.
SESSION 2.3
Maintenance Free Bridge – In Search of the Holy Grail
Gary R. Harvey, L.S. Jeremy M. Bourdeau, P.E. Charles Tutunjian, P.E. County Superintendent Senior Project Engineer Construction Manager Greene Co. Hwy. Dept. Barton & Loguidice, P.C. Creighton‐Manning Engr. LLP P.O. Box 485 2 Corporate Plaza 17 Computer Drive West 240 West Main Street 264 Washington Ave. Ext. Albany, NY 12205 Catskill, NY 12414 Albany, NY 12203 Phone: (518) 446‐0396 Phone: (518) 943‐4600 Phone: (518) 218‐1801 [email protected] [email protected] [email protected]
Synopsis:
The goal of the project to replace the bridge carrying High Falls Road Extension over the Kaaterskill Creek was to remove structural and hydraulic deficiencies present in the existing bridge while preserving the historic, aesthetic and in‐situ characteristics of the site. The construction concepts utilized resulted in a better quality product completed within the overall budget.
The original two‐span structure’s pier yielded a hydraulic obstruction that snagged floating debris and exacerbated flood level conditions. Further, the laid‐stone wingwall construction did not respond well to high flow conditions and promoted undesirable vegetative growth. The new single span superstructure increased the waterway opening by eliminating the pier. In addition, the prestressed adjacent box beam superstructure provides a smooth bottom surface which enhances hydraulic efficiency. Aesthetic formliner treatments on both the pre‐cast and cast‐in‐place concrete elements tied the structure to the adjacent stone walls, upstream dam and a historic building on one quadrant. By precasting the form patterns into the fascia beams, the exposed bridge fascias provide a link to the stone construction predominant in Greene County.
This presentation will focus on design considerations, options and decisions required to yield a successful final bridge replacement, as well as the lessons learned during construction particularly with respect to the use of formliners and concrete staining when using both cast‐in‐place and pre‐cast concrete.
About the Presenters:
Gary R. Harvey is a Professional Land Surveyor, with an Associate in Applied Science degree in Civil Technology from Canton College in 1971, and a Bachelor of Science degree in Vocational Technical Education from SUNY Oswego. Before joining the Greene County Highway Department in 1995 as an Assistant Engineer, he worked in the private sector, and has over 35 years experience in the
SESSION 2.4
High Falls Road Extension Bridge Replacement Project
engineering and construction field. He has been the Greene County Highway Superintendent since 1998. Jeremy Bourdeau is a Senior Project Engineer with Barton & Loguidice, P.E., located in Albany, New York. He is a graduate of Clarkson University with a Bachelor of Science in Civil Engineering Degree. Jeremy has been with B&L since 2001 and has over 8 years of engineering design and construction administration experience in the field of bridges and other transportation related infrastructure. He is responsible for the technical execution of bridge and hydraulic designs, and for associated construction administration services. He served as project engineer for the design and contract document development for this project and for numerous other bridge and transportation projects throughout New York.
Charles Tutunjian, PE, is a Senior Project Manager with Creighton Manning Engineering and has served as the head of the Bridge Structures Group since joining the firm 4 years ago. He is a graduate of Rensselaer Polytechnic Institute with a Bachelor of Science Degree in Civil Engineering. Charles has 18 years of experience in consulting engineering working with the NYSDOT, NYS Thruway Authority, and numerous local municipalities throughout eastern NYS. He has served as Project Manager for over 40 bridge replacement and rehabilitation projects, including 14 locally administered federal aid projects. Charles was responsible for the Construction Administration for this project.
Kyle Vandewater Deputy Superintendent Washington County DPW Phone: (518) 746‐2440
Synopsis:
When replacing a bridge on a dead end road in the Adirondack Park, in the Town of Dresden, a successful project is less defined by preserving the rural character, than surviving the rural characters…
About the Presenter:
Kyle Vandewater has been the Deputy Superintendent of Public Works for Washington County since 2001. He provides general supervision for the Solid Waste and Engineering Divisions, and manages construction performed by county forces in the Highway Division.
Mr. Vandewater received a B.S. in Civil Engineering from Union College and has worked as a project manager for Stonebridge Iron & Steel, and The Chazen Companies.
SESSION 2.5“Wheelers Bridge"
South Bay Road over Pike Brook Town of Dresden
James H. Flynn, P.E. Scott D. Lagace, P.E. NYSDOT, Office of Structures NYSDOT, Office of Structures 50 Wolf Road, POD 43 50 Wolf Road, POD 43 Albany, NY 12232 Albany, NY 12232 Phone: (518) 485‐9117 Phone: (518) 485‐1386 [email protected] [email protected]
Synopsis:
New York State’s Divisible Load Permit Program allows approved overweight divisible load vehicles to travel on the State’s highways. The program provides many economic benefits to business operators, customers and highway travelers throughout the state. Some of these benefits include decreased traffic congestion, reduced CO2 emissions and a decrease in transportation costs. However, the advantages noted must be balanced with the need to protect the safety of the traveling public and the need to minimize the adverse effects on the State’s infrastructure. This presentation will discuss the history and current policies of New York State’s Divisible Load Permit Program and how the program may affect local bridge owners.
About the Presenters:
James Flynn received his BS degree in Civil Engineering from Rensselaer Polytechnic University in 1992. Jim first worked for Frederic R. Harris, Inc. performing both bridge inspections and bridge design. In 1994, Jim joined NYSDOT as a junior engineer in Main Office Structures. After spending 10+ years in bridge design, he took over the Office of Structures Bridge Standards and Policy Unit. Most recently, in early 2008, Jim became the head of the Office of Structures Bridge Safety Assurance Unit. Jim is a licensed Professional Engineer in New York.
Scott Lagace, is a 1991 graduate of Union College with a B.S. in Civil Engineering and a 1998 graduate of the University of Albany where he earned his M.B.A. Scott has spent 17 years working for New York State Department of Transportation. He spent seven years in Bridge Design, followed by nine years in Bridge Safety Assurance, where he was responsible for overseeing the NYSDOT Load Rating Program, the Bridge Office’s Overload Permit Review Unit, and Bridge Safety Assurance program. Scott is currently the Technical Assistant to the Director of Structures.
SESSION 3.1
Divisible Loads
Glenn R. Tabolt, P.E.
Vice President, STS Steel, Inc. 301 Nott Street
Schenectady, NY 12065 Phone: ( 518) 370‐2693 [email protected]
Synopsis:
This presentation will provide a steel fabricator’s perspective on rolled beam, plate girder and truss bridges. Material availability, fabrication processes, NDT and the cost impact of some common design details will be discussed.
About the Presenter:
Glenn Tabolt has a Bachelor of Science degree in Civil Engineering from Clarkson University and an MBA from the University of Pittsburgh. He began his career with Pittsburgh des‐Moines Steel (PDM) and co‐founded STS Steel in 1984 with Jim Stori.
SESSION 3.2
Fabrication Considerations for Steel Bridges
Christopher Day, P.E. Wendell Buckman, P.E.
Bridge Engineer Project Engineer Ontario County DPW Barton & Loguidice, PC
2962 County Road No. 48 290 Elwood Davis Road Canandaigua, NY 14424 Syracuse, NY 13220 Phone: (585) 396‐4282 Phone: (315) 457‐5200 [email protected] [email protected]
Synopsis:
The presentation discusses the replacement of the William Street Bridge over Flint Creek in the Village of Phelps. The project was initiated by the Ontario County Department of Public Works in cooperation with NYSDOT Region 4 and the FHWA as a federal aid “pass through” project. Barton & Loguidice, P.C. (B&L), provided full preliminary and final design services, and construction inspection. Ramsey Constructors, Inc. was the contractor and completed construction in 2008. The existing William Street bridge was a steel multi‐girder superstructure with a cast‐in‐place concrete deck supported by gravity abutments. The narrow steel girder superstructure was deteriorated and the abutments were poorly aligned with the stream creating scour concerns. The skewed crossing is located in a ravine‐like setting with highly competent rock located at the stream bed elevation. During design, several superstructure types were considered for replacement including a precast arch, precast concrete box beams and a cast‐in‐place concrete arch. The cast‐in‐place arch was selected because it better accommodated the skew, eliminated many high maintenance bridge elements and provided a more cost effective structure. The superstructure selection was also influenced by the existing venerable arch bridges located upstream and downstream that have performed well by taking advantage of the natural benefits provided by the setting. Other interesting project features to be discussed include explosive demolition of the existing bridge, coordination with village public works and schedule constraints.
About the Presenters:
Christopher Day received his BS degree in Civil Engineering from the State University of New York at Buffalo in 1994. Chris worked in consulting engineering designing and managing bridge projects for various clients throughout the northeast. In 2005, Chris began working as a bridge engineer for the Ontario County Department of Public Works. His principal duties
SESSION 3.3
William Street Bridge Replacement
include management of the County’s bridge and large culvert inventory, bridge and culvert design, oversight of bridge construction and maintenance and administering federal aid bridge projects. Wendell Buckman is a Project Engineer and licensed Professional Engineer with Barton & Loguidice located in Syracuse New York. He has 8 years of experience in bridge design and construction. He has been involved with various aspects of bridge design including superstructure design, substructure design, hydraulic analysis, scour calculations, deterioration mapping of structural members, condition analysis of existing structural components and Level 1 load ratings.
Thomas Hoffman, P.E. Regional Structures Engineer
NYSDOT – Region 1 328 State Street
Schenectady, NY 12305 Phone: (518) 388‐0317
Synopsis: The I‐87 over the Mohawk River bridges, also known as the Twin Bridges, carry over 100,000 vehicles a day between Albany and Saratoga counties. The main span, a 600’ steel arch with suspended floorbeams, required replacement of all the bridge strands on the structure. The condition of the bridge strands required special monitoring and rapid replacement at many locations. This presentation discusses the bridge conditions, design aspects for a successful project, and the construction phase of the strand replacement.
About the Presenter:
Tom Hoffman received his BS degree in Civil Engineering from Rensselaer Polytechnic Institute in 1991 with a focus in structural engineering. He joined NYSDOT Region One Bridge Design in 1992, and has worked his entire DOT career in the Regional Office. Tom has designed and managed a variety of steel and prestressed concrete bridge replacement and rehabilitation projects. Tom currently serves as the Region One Structures Engineer, overseeing bridge projects in the eight county region based in Schenectady. Part of his duty is in assisting the Regional Planning office in developing the bridge program, reviewing local federally aided bridge projects, and granting concurrence on the use of Federal funds. He is a licensed Professional Engineer in the State of New York.
SESSION 4B.1
Twin Bridges Cable Replacement
Mathew Royce, P.E. Stephen J. Percassi Jr., P.E. NYSDOT, Office of Structures Associate / Structural Engineer 50 Wolf Road, POD 43 Erdman Anthony Albany, NY 12232 2165 Brighton Henrietta Town Line Road Phone: (518) 485‐7256 Rochester, NY 14623 [email protected] Phone: (585) 427‐8888 [email protected]
Synopsis:
NYSDOT recently completed its first precast concrete “Deck Bulb Tee” superstructure carrying Route 31 over Canandaigua Outlet in Lyons, NY. Even though deck bulb tee superstructures have been used elsewhere in the country with reasonable success, poor long term performance of the grouted joints was a concern especially for bridges carrying high volumes of truck traffic. The above bridge utilized innovative Ultra High Performance Concrete (UHPC) for the reinforced closure joints. The first part of this presentation by Mathew Royce will focus on the design, detailing, fabrication and installation aspects of this project. Due to the geometric limitations of the bridge location, very tight tolerances of adjacent flanges along each longitudinal joint were needed. Forced adjustment of camber was used to achieve the required tolerance. Erdman Anthony, consultant to the contractor Ramsey Constructors, developed a hydraulic jacking system for this purpose. The second part of this presentation by Stephen Percassi will concentrate on the above mentioned jacking system.
SESSION 4B.2
Superstructure Replacement of Route 31 over Canandaigua Outlet with Deck Bulb Tees
About the Presenters: Mathew Royce is a Project Engineer in the Structures Design Bureau, Office of Structures. Mathew received Bachelor of Science in Civil Engineering with concentration in Structural Engineering from the University of Calicut, India. Mathew has been working for the Office of Structures, NYSDOT, since 1988. He is currently managing two Design Squads. Prior to his current assignment, he supervised the Concrete Engineering Unit which managed the Quality Assurance program for all precast concrete structural elements for the Department. Mathew is a licensed professional engineer in New York State. Steve Percassi is an associate with Erdman Anthony Consulting Engineers. He attended the State University of New York at Buffalo from which he received a Bachelors of Science degree in Civil and Structural Engineering in 1999. Additionally, Steve received his Masters of Science degree in Structural and Earthquake Engineering from SUNY Buffalo in 2000.
Since joining Erdman Anthony in 2000, Steve has acquired experience in the rehabilitation, design and erection of bridge structures for numerous Departments of Transportation. Steve is a licensed professional engineer in New York, Pennsylvania and Maine. Steve is also a member of the Association of Bridge Construction and Design.
John Wind, P.E. Stephen J. Percassi, Jr., P.E. Associate Construction Engineer Associate/Structural Engineer NYSDOT – Region 5 Erdman Anthony 100 Seneca Street 2165 Brighton Henrietta Town Line Rd. Buffalo, NY 14203 Rochester, NY 14623 Phone: (716) 847‐3901 Phone: (585) 427‐8888 [email protected] [email protected]
Synopsis:
The NYSDOT is currently constructing a 4.2 mile extension of US Route 219 from Springville to Ashford, New York. The centerpiece of the project is twin open spandrel steel arch structures spanning Cattaraugus Creek from Erie to Cattaraugus Counties.
Access into Zoar Valley and Cattaraugus Creek presented many engineering challenges for erecting the twin 725 ft structures. Unique construction techniques and temporary supports were required to facilitate erection of the structural steel. This presentation will include description and photographs of the erection of these arch structures.
About the Presenters:
John Wind is a licensed Professional Engineer and an Associate Construction Engineer with the New York State Department of Transportation. John attended the State University of New York at Buffalo from which he received a Bachelors of Science degree in Civil Engineering in 1983.
John began his career with NYSDOT in 1983 as a Junior Engineer, starting in the Region 5 Design Group. He has been with the Construction Group for 22 years having run the plan review functions and then as Engineer‐in‐Charge. He has been a Construction Supervisor for the past six years.
John currently serves as the Department’s Construction Supervisor for the Route 219, Section 5 expressway construction project.
Steve Percassi is an associate with Erdman Anthony Consulting Engineers. Steve attended the State University of New York at Buffalo from which he received a Bachelors of Science
SESSION 4B.3
Route 219 Over Cattaraugus Creek Arch Erection
degree in Civil and Structural Engineering in 1999. Additionally, Steve received his Masters of Science degree in Structural and Earthquake Engineering from SUNY Buffalo in 2000. Since joining Erdman Anthony in 2000, Steve has acquired experience in the rehabilitation, design and erection of bridge structures for numerous Departments of Transportation. Steve is a licensed professional engineer in New York, Pennsylvania and Maine. Steve is also a member of the Association of Bridge Construction and Design.
Synopsis:
The Dinosaur Bar‐B‐Que was started in 1983 by three bikers, bound together by the love of good food, a 55 gallon drum cut in half, and a serious case of wanderlust. For five years the road was their home, slinging Bar‐B‐Que at motorcycle shows, fairs, and festivals up and down the east coast. It is from their travels that their Bar‐B‐Que evolved. By 1988, burnt out from the road, their gypsy journey settled into downtown Syracuse and opened up as a take out Bar‐B‐Que joint.
In 1990, feeling the need to couple some booze with their Bar‐B‐Que, they doubled their space and added a full bar and waitress service. Blues always served as their musical backdrop so the next step became live music. Starting with their first act, Dr. Blue, they went from one night of live music to two, then three…as they say, the rest is history.
In April of 1998, they opened their second Dinosaur Bar‐B‐Que in Rochester, NY. It has taken on its own unique personality, while offering the same great Dinosaur grub and passion for blues.
Their third location opened in December 2004, in Harlem, NY. Harlem Dinosaur has become a favorite destination for Manhattanites, locals, and everyone in the tri‐state area.
They anticipate opening their fourth restaurant in Troy, NY in the Spring of 2010.
Over the last decade, their Bar‐B‐Que has been nationally acclaimed, as well as their blues club, as one of the best in the country. They also manufacture and distribute five of their own specialty sauces throughout the U.S., England, and Australia.
Their Dinosaur cookbook is available with over 100 attitude‐packed recipes. John Stage reveals many of his secret recipes that have made “The Dinosaur” a favorite with Barbecue aficionados everywhere!
Additional information can be found at www.dinosaurbarbque.com.
Dinner Topic: Dinosaur Bar‐B‐Que
Pete Weykamp, P.E. NYSDOT
Transportation Maintenance Division 50 Wolf Road, POD 5‐1 Albany, NY 12232
Phone: (518) 457‐8485 [email protected]
Synopsis:
Pete Weykamp co‐chaired the domestic scan tour sponsored by AASHTO and NCHRP. The team identified and visited seven leading state agencies to discuss the types of information and processes used in developing their bridge maintenance program. This presentation provides a synopsis of the findings and provides a listing of common attributes found in each of the agencies. Also included are “Good Practices” developed in several of host agencies. Topics discussed include:
Identification and Categorization of Needs Use of Performance Measures Maintenance Budgets and Costs Planning and Programming Process Maintenance Tracking and Accomplishments Data Systems Post‐tour Activities
A summary report is available at www.transportation.org/sites/bridges/docs/2009 Domestic Scan ‐ Bridge Management Decision Making Summary Report.pdf. A webinar on scan highlighting the programs developed in California and Michigan is scheduled for November 19th. The final report is expected to be available in December.
About the Presenter:
Peter Weykamp is the Bridge Maintenance Program Engineer for the New York State Department of Transportation (NYSDOT). His primary duties include development of network level maintenance strategies, operations management, product evaluation, and technical supervision. He has been with NYSDOT for 26 years, holding positions in structural design, research, and construction. Mr. Weykamp chairs the Bridge Task Force on the AASHTO Subcommittee on Maintenance, is a member of the TRB AHD‐30 Structures Maintenance Committee, and is currently a panel member for several NCHRP projects related to bridge maintenance/preservation. Of particular interest is the use of GPR for network level bridge deck management.
SESSION 5.1
Scan Tour Findings: Best Practices Bridge Management Decision Making
Douglas Rose, P.E.
Bridge Maintenance Engineer NYSDOT – Region 1 328 State Street
Schenectady, NY 12305 Phone: (518) 388‐0398 [email protected]
Synopsis:
One of the most important considerations of bridge repairs is access. This presentation will discuss various methods used to access bridges for repair. Workers need to be safe and comfortable when working on a bridge. Access for repair usually differs from access for inspection as the work area needs to be able to accommodate workers, tools, materials, etc. Access can be simple and inexpensive or very complicated and pricey and is very often complicated by traffic considerations.
About the Presenter:
Doug Rose has been with DOT since 1985 and is currently the Regional Bridge Maintenance Engineer for Region One in Schenectady. He is responsible for the Bridge Maintenance Program for the 835 DOT maintained bridges in Region One. DOT bridge maintenance work is performed by 6 crews located in 5 facilities across the Region. Prior to coming to Maintenance, Doug was a Regional Structures Engineer and Bridge Management Engineer in two DOT Regions. He has a Bachelor’s Degree in Civil Engineering from Worcester Polytechnic Institute.
SESSION 5.2
Bridge Access For Repairs
Kevin P. Marracino, P.E. William Fox, P.E.
Regional Bridge Management Engineer Senior Civil Engineer NYSDOT – Region 5 Cattaraugus County DPW 100 Seneca Street Engineering Division Buffalo, NY 14203 8810 Route 242 Phone: (716) 847‐3195 Little Valley, NY 14755 [email protected] Phone: (716) 938‐9121 [email protected]
Synopsis:
The presentation will outline the Local Bridge Maintenance Initiative set in place by Region 5 for Local Bridge owners through the LAFAP program using HBRR funding. The presentation will describe Region 5’s approach to the initiative using HBRR funds, the types of project eligible, the project selection process, the design procedures and construction examples.
About the Presenters:
Kevin P. Marracino is the Regional Bridge Management Engineer for Region Five of NYSDOT. Mr. Marracino joined the NYSDOT in 1979. He is responsible for safety assurance and inspection of bridges, overhead sign structures, and large culverts located in Region Five. Prior to his current position, he was the Regional Structures Engineer, Team Leader for Bridge Inspection, Assistant to the Regional Bridge Maintenance Engineer, and worked in a Regional Structures Design Group.
Mr. Marracino is an active member of the New York State Association of Transportation Engineers; American Society of Civil Engineers (Buffalo Section); International Concrete Repair Institute, WNY Chapter; and Association for Bridge Construction and Design, WNY Chapter. Kevin is a Licensed Professional Engineer in New York State and has a degree in Civil Engineering from State University of New York at Buffalo.
William Fox graduated from The Citadel, The Military College of South Carolina with a Bachelor of Science in Civil Engineering in 1989. Mr. Fox has been with Cattaraugus County since 1998 serving as the county’s Senior Civil Engineer. Prior to coming to Cattaraugus County, Mr. Fox began his career in 1989 working as a consultant for a Rochester, NY based firm, then in 1995 he joined Mid‐Atlantic consulting firm located in Raleigh, NC. As a consultant, he has been involved in the design and development of highway, bridge, wetland
SESSION 5.3
Keeping What We have – Federal Aid For Local Bridge Maintenance
restoration, recreation trail and building projects. He has acted as a structural engineer for bridges in New York, North Carolina, South Carolina, Virginia and Georgia. His building experience has ranged from private homes, office buildings, public schools and universities to working on the Pentagon’s refurbishing project. His duties include administering the county’s federal aid program, performing in‐house designs for county‐funded capital and maintenance projects and administering the code compliance program for county‐owned buildings.
Vince Spagnoletti
Steuben County Commissioner of Public Works Steuben County Office Building
3 East Pulteney Square Bath, NY 14810
Phone: (607) 664‐2460 [email protected]
Synopsis:
The Local Agency Forum is a place where individuals can voice the problems they are having and get feedback from others on how to address the problem. Individuals may also share success stories that may help others with their jobs.
About the Presenter:
Vincent Spagnoletti was appointed Commissioner of Public Works for the County of Steuben in November 1992. Mr. Spagnoletti received his Bachelor's Degree in Civil Engineering from Clarkson College.
SESSION 6.1
Local Agency Forum Report
David Kennicutt, P.E. Project Manager
Delta Engineers, Architects and Land Surveyors 184 Court Street
Binghamton, NY 13901 Phone: (607) 231‐6606
[email protected] Synopsis:
The Bevier Street Bridge, owned by Broome County, is a five‐span steel multi‐girder structure crossing the Chenango River in Binghamton, NY. This federally funded “pass‐thru” project consisted of a complete rehabilitation of the structure, including replacement of the deck, bearings, railings, joints, cleaning and painting, and intersection improvements on the approaches. Highlighted features include: • Staging techniques whereby two‐way traffic was maintained during construction. • Use of precast concrete Texas aesthetic barrier system. • Context sensitive measures that provide for a future extension of a local river trail
system, including widening and the addition of a sidewalk and bike lanes on the structure, Otsiningo Park entrance improvements with Native American theme, construction of a VFW memorial (the structure is designated the “VFW Memorial Bridge”), and construction of a multi‐use trail that wraps under the structure into the County‐owned park.
Mr. Kennicutt will provide an overview of this $6.4 million project, discuss unique features and lessons learned during construction.
About the Presenter:
David Kennicutt is a Project Manager in the Transportation Department for Delta Engineers, Architects and Land Surveyors. He has over 30 years of experience in the design of highway bridges, with special expertise in the rehabilitation of historic concrete arch and metal truss bridges, and has managed the design of numerous State and municipal bridge rehabilitation and replacement projects. Mr. Kennicutt is a registered Professional Engineer licensed in New York State.
SESSION 6.2
Bevier Street Bridge Rehabilitation
James Craig, P.E. Managing Engineer, Bridge Department
Highway‐Bridge Service Group C&S Engineers, Inc.
499 Col. Eileen Collins Blvd. Syracuse, NY 13212 (315) 455‐2000
Synopsis:
This project included major bridge rehabilitation using a unique precast, post‐tensioned HP concrete deck reinforced with glass Fiber Reinforced Polymer (GFRP) reinforcement. The steel girders and reinforcement for substructures were galvanized. This presentation will focus on the design and construction challenges of the project.
About the Presenter:
Jim Craig received his BS degree in Civil Engineering from the University of Buffalo with a focus in structural engineering. Jim has been a design engineer/project manager on numerous LAFA, local and NYSDOT bridge projects over the past 13 years. Jim served as the Project Manager for the CR 30 over Roaring Brook Bridge Rehabilitation in Lewis County, NY. He has also been the Project Manager for 6 bridge projects utilizing Fiber Reinforced Polymer (FRP) materials through the FHWA’s Innovative Bridge Programs. These bridge projects have included FRP Deck Panels and FRP reinforcement for several Counties including Lewis and St. Lawrence.
He is a member of ASCE and the Western NY Chapter of ABCD (Association for Bridge Construction and Design). Jim is a licensed Professional Engineer in New York.
SESSION 6.3
Concrete Deck Panels with Fiber Reinforced Polymer (FRP) Rebars
Vance G. Carpenter, P.E.
Civil Engineer Jefferson County Highway Department
21897 County Road 190 Watertown, NY 13601 Phone: (315) 786‐3600
Synopsis:
Jefferson County has been placing precast concrete box structures for over 15 years. The engineering section has been working with their bridge crew over the past several years to develop and provide an efficient and effective scour protection alternative for their culvert and short span bridge replacement projects. This presentation will provide a review of three structure replacements and the different scour protection techniques used leading to the current process installed on Jefferson County structures.
About the Presenter:
Vance Carpenter received his BS in Civil Engineering from Clarkson University in 1982. He received a direct commission in the US Army and spent the next 11 years on active duty in the US Army Corps of Engineers working on many facets of construction throughout the United States and Europe. In 1993 he left active duty and was hired as a Junior Engineer at Jefferson County in charge of bridge and culvert replacements. In 1995 he received his Professional Engineering license in Virginia and New York and was promoted to Civil Engineer. Vance continues to provide all facets of transportation design for Jefferson County. Additionally, he continues to serve as a Lieutenant Colonel in the US Army Reserves assigned as the Design Engineer for the 411th Engineer Brigade.
SESSION 6.4
Jefferson County – Scour Protection/Cut‐Off Wall Design
Steering Committee:
George Christian, Chairman NYSDOT Scott Lagace NYSDOT Peter Weykamp NYSDOT Lorraine Mihaljevic NYSDOT Lynne Irwin Cornell Local Roads Program David Orr Cornell Local Roads Program Donna Simons Cornell Local Roads Program Mark Laistner ABCD Earl Dubin FHWA Christopher Day Ontario County Willy Grimmke Washington Co., DPW Thomas Hack City of Rochester Guy James Allegany County
Presented By:
New York State New York State County Highway Department of Transportation Superintendents Association Federal Highway Administration Cornell Local Roads Program Association for Bridge Construction Association for Bridge Construction and Design – Western NY Chapter and Design – Eastern NY Chapter
SIXTEENTH STATEWIDE CONFERENCE
ON LOCAL BRIDGES
October 21 – 22, 2009
Holiday Inn Syracuse/Liverpool, NY
AGENDA 6:45-8:00 am BREAKFAST - Cotillion Ballroom Wed. & Thurs. 6:45-8:00 am REGISTRATION – Convention Center Foyer Wed. & Thurs.
SESSIONS WILL BE HELD IN CONVENTION CENTER
WEDNESDAY, OCTOBER 21, 2009
8:00-8:10 am Welcome/Opening Remarks George Christian Carl Ford Don Higgins SESSION I GENERAL TOPICS George Christian 8:10-8:25 am Training Subcommittee Update Rohit Dagli 8:25-8:50 am FHWA Update Mike Davies 8:50-9:15 am Local Programs Bureau Update Diane Kenneally 9:15-9:45 am Investigation of Two Prestressed Christopher Day Concrete Box Beam Bridges with Meghan Morales Diagonal Cracking 9:45-10:00 am NYSDOT Update Stanley Gee 10:00-10:30 am BREAK – Grand Ballroom East SESSION 2 FEATURED REGION – REGION 1 Thomas Hoffman 10:30-10:35 am Introduction to Region 1 Thomas Hoffman 10:35-11:00 am Red Flag Repairs on Wayne Bonesteel Rensselaer County Bridges Eric Alexopoulos 11:00-11:30 am Maintenance Free Bridge - Willy Grimmke In Search of the Holy Grail 11:30-12:00 am High Falls Road Extension Gary Harvey Bridge Replacement Project Jeremy Bourdeau Charles Tutunjian 12:00-12:30 pm “Wheelers Bridge” South Bay Road Kyle Vandewater Over Pike Brook, Town of Dresden 12:30-1:45 pm LUNCH – Cotillion Ballroom SESSION 3 GENERAL TOPICS Guy James 1:45-2:15 pm Divisible Loads Jim Flynn Scott Lagace
2:15-2:45 pm Fabrication Considerations Glenn Tabolt For Steel Bridges 2:45-3:15 pm William Street Bridge Christopher Day Replacement Wendell Buckman 3:15-3:45 pm BREAK – Grand Ballroom East SESSION 4A LOCAL AGENCY FORUM Vince Spagnoletti 3:45 pm Break Out Session for Local Agency Reps – Onondaga Room SESSION 4B GENERAL TOPICS Earl Dubin 3:45-4:15 pm Twin Bridges Cable Replacement Thomas Hoffman
4:15-4:45 pm Superstructure Replacement of Rte. 31 Matthew Royce Over Canandaigua Outlet with Deck Stephen Percassi Bulb Tees 4:45-5:15 pm Route 219 over Cattaraugus Creek John Wind Arch Erection Stephen Percassi 5:15 pm SOCIAL HOUR – Grand Ballroom East 7:00 pm DINNER / SPEAKER – Cotillion Ballroom Dinosaur Bar-B-Que
THURSDAY, OCTOBER 22, 2009
SESSION 5 MAINTENANCE & REPAIRS Pete Weykamp 8:30-9:00 am Scan Tour Findings: Best Practices Pete Weykamp Bridge Management Decision Making 9:00-9:30 am Bridge Access For Repairs Doug Rose 9:30-10:00 am Keeping What We Have – Federal Aid Kevin Marracino For Local Bridge Maintenance William Fox 10:00 -10:30 am BREAK – Grand Ballroom East SESSION 6 GENERAL TOPICS William Fox 10:30-10:45 am Local Agency Forum Report Vince Spagnoletti 10:45-11:10 am Bevier Street Bridge David Kennicutt Rehabilitation 11:10-11:35 am Concrete Deck Panels with Fiber Jim Craig Reinforced Polymer (FRP) Rebars 11:35 -12:00pm Jefferson County – Scour Vance Carpenter Protection/Cut-Off Wall Design 12:00 pm Final Questions and Wrap-up George Christian