Attention! To disassemble the PSG5
electronic pump module (EPM), you do not need to remove the
pump out of the car!
Location of the PSG5 EPM
Attention! Try to cut near the middle of the wire, not at the edges!
Attention! Cut the wires one by
one, and at a different point. Just before and after the
middle.
Attention! There is an angle
sensor with delicate flat cable underneath!
Attention! There is an angle
sensor with delicate flat cable underneath
Attention! Use a magnetic
screwdriver.
Attention! Use a magnetic
screwdriver.
Attention! Use a magnetic
screwdriver.
Attention! Secure the angle
sensor during transport.
Attention! Make sure the flat
cable is not twisted.
Attention! Secure the angle
sensor during transport.
Attention! Pack the PSG5 EPM
along with the ROF form
and sent it to us.