Slot Diffusers • Round Duct Diffusers
LD-13
SLOT DIFFUSERS, ROUND DUCT DIFFUSERS
LD-14
LD-15
LDP-14
SKD-13D
LD-16N
Slot diffusers LD-13, LD-14, LD-15
Panel design slot diffusers LDP-13 and LDP-14
SLOT DIFFUSERS
Application:Slot diffusers are designed for air supply in roomswith floor to ceiling heights of 2.5 to 4 m. Theyare suitable for supplying either cold or warm air, in particular in applications where air conditioningcomfort demands are stringent. Due to their highinduction rate and rapid decrease of temperaturedifference, these diffusers are also suitable forvariable systems.
Description:Diffuser face plate is made of anodized aluminiumsections with built-in cylindrical deflectors madeof recycled plastics. Deflectors allow continuosadjustment of discharged air direction within the360o range. The diffuser plenum box is made ofgalvanised sheet steel and has a flow rate controldamper built in its inlet spigot, to allow fineadjustment of the desired air flow rate.
PANEL DESIGN SLOT DIFFUSERS
A panel design slot diffuser consists of a faceplate and a plenum box. Cylindrical air deflectors,equal to those in LD-13 and LD-14 diffusers, are installed in the slots, to allow continuousadjustment of discharged air direction within the360o range. On order, diverse plate designs andslot patterns are available.
ROUND DUCT DIFFUSERS
Application:Round duct diffusers can be installed at variouslocations within the duct network. They are suitablefor supplying either cold or warm air.
Description:They are made of galvanised tubes with slotsequipped with cylindrical air deflectors equal to those in the LD-13 slot diffuser, to allowadjustment of air direction and flow rate. As standard, the tube and cylindrical deflectors are in RAL 9010 white colour.
SOFTWARE: KLIMA ADE 5.3
LD and SKD Software:- available calculation and graphical display of air
supply for slot diffusers LD-13, LD-14 and LD-15
- available calculation of technical specificationsfor the application of wall- or ceiling-mountedslot diffusers
- available calculation of ceiling-mountedmultiple-diffuser configuration air supply
- application of vertical or horizontal slot diffuserair supply into the room, depending on themode of operation - heating or cooling
- the package supports basic air supply modemodels for the SKD-13 round duct diffuser
- available calculation of SKD-13 round ductdiffuserscooling mode: single-side and two-sidehorizontal supply and alternating horizontal supplyheating mode: vertical air supply
Round duct diffusers SKD-13
LD and SKD Software
Software: Klima ADE 5.3
RAL9010
M
CD
PROGRAMM AIR CONDITIONING AIR DISTRIBUTIONSlot Diffusers, Round Duct Diffusers
Slot diffusers Page
Slot diffusers LD-13 and LD-14 ................................................................................................................................................................................................2• Technical data for LD-13 and LD-14 Slot diffusers................................................................................................................................................................8Slot diffusers LD-15 ................................................................................................................................................................................................................15Floor slot diffusers LD-16N.....................................................................................................................................................................................................19Panel design slot diffusers LDP-13, LDP-14...........................................................................................................................................................................21
Round duct diffusersRound duct diffusers SKD-13 ..................................................................................................................................................................................................23
Legend of symbols
Element is made of aluminium profiles, aluminium sheet or aluminium casting.
Element is made of steel sheet.
Element is powder painted in standard RAL 9010 colour. Other desired colour is to be specified in the order.
Shady symbol means possibility of optional material, surface protection, motor version, ...
Element is intended to be built in the floor.
Element is intended to be built in the wall.
Element is intended to be built in the ceiling or in the wall.
Element for air conditioning of rooms with floor to ceiling heights room up to 4m.
Element for air conditioning of rooms with floor to ceiling heights from 6 to 15m.
Element is suitable for the supply of warm air (heating).
Element is suitable for the supply of cool air (cooling).
Element allows regulation by electric motor (Belimo electric motors).
Element is intended for air filtration. The filter of class ... is built in.
The possibility of the automatic selection and calculation of the technical characteristics of grilles and difusers in regard to the givenconditions with the assistance of the Klima ADE program.
St
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production 2
A
9.4
8.5
41
15
E
5
6
7
LD-13
12
3
φ D
Ha
B 60
H1LD-13
LD-14
8
53
8.5
9.4 4
5
6
E
26A
7
LD-14
SLOT DIFFUSERS LD-13, LD-14
RAL
CD
Slot diffusers LD-13, LD-14
Application:LD-13 and LD-14 slot diffusers are designed forthe supply of air in rooms with floor to ceilingheights of 2.5 to 4 m for supplying either cold orwarm air, in particular in applications where air conditioning comfort demands are stringent. Due to their high induction rate and rapid decrease of temperature difference, these diffusers are alsosuitable for variable systems.
Description:LD-13 and LD-14 slot diffusers are designed in 1,2, 3 and 4-slot versions. Diffuser face plate consists of anodised aluminium sections withbuilt-in cylindrical deflectors made of recycledplastics. Deflectors allow continuos adjustment of discharged air direction within the 360o range as well as control of supply air flow rate. Thecylindrical deflectors also allow full shutting of the diffuser. The slot diffuser plenum box is madeof galvanised sheet steel and has a flow rate control damper built in its inlet spigot, to allowfine adjustment of the desired air flow rate.
Component parts:
1 Plenum box2 Inlet spigot 3 Volume control damper4 Main section5 Cylindrical deflector6 Side lateral section7 Connecting section8 Outside insulation
Control schematic of the spigot volumecontrol damper:
Installation openings:(A+5) x (L+15)
Installation openings:(A+5) x (L+15)
3TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
LD-14 O/1
LD-14 O/2
LD-14 O/4
LD-14 O/3
LD-13 O/1
LD-13 O/2
LD-13 O/3
LD-13 O/4
50
96.5
142
187.5
53.5
53.5
53.5
53.5
142
107
72.5
37.5
41.5
41.5
41.5
41.5
LD-13, LD-14LD-13 O, LD-14 O
LD-13/1
LD-14/1
LD-13/2 LD-13/3 LD-13/4
LD-14/2 LD-14/3 LD-14/4
SLOT DIFFUSERS LD-13, LD-14
No. of slots H H1 B A E F1 220 261 95 33 57.5 24.42 230 271 129 67 92 58.23 250 291 162 101 126.5 92.04 290 331 196 135 161.5 125.8
LD-13
No. of slots H H1 B A E F1 233.5 287 106 44 69.5 35.32 253.5 307 150 89 115.5 803 293.5 347 195 133 162.5 124.74 318.5 372 240 178 208.5 169.4
LD-14
Standard lenghts L
LD-13 and LD-14 slot diffusers are available in standard lengths ranging from L=300 toL=2000 mm, with a 100 mm step. In cases wherelonger diffusers are required, they can be jointtogether by means of (rail-type) connecting plates.Plenum boxes are also available in standardlengths ranging from 300 mm to 2000 mm.
Special orders:On customer’s request slot diffusers can be madein other dimensions. End seals and longitudinalsections are painted in any RAL scale colouraccording to the customer’s request. As standard,cylindrical deflectors are black or white, on thecustomer’s request, they can be coloured in anyRAL scale colour. Non-standard colours and extracomponents are to be ordered separately.
Slot diffuser types:
� Single-slot (designation LD-13,14/1) � Two slots (designation LD-13,14/2)� Three-slots (designation LD-13,14/3)� Four-slots (designation LD-13,14/4)
Slot diffusers LD-13 O and LD-14 ONarrow version - New installation method
The narrow slot diffuser differs from the conventional slot diffuser construction as regards its mounting to the ceiling or wall. The conventional slot diffuser has a L-cross-section mounting sleeve which remains visible and may, in certain applications, interferewith aesthetic requirements. The new design haseliminated this deficiency as well as introducedimproved structural rigidity due to its reinforcedsleeve. The product is thus suitable forinstallation in cooling suspended ceilings as well.
L/2L/2
J J
300
300
SLOT DIFFUSERS LD-13, LD-14
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production 4
Joining diffusers together in length and width
Joining in width (into diffusers with multipleslots) requires special strip sections, while joiningin length requires connecting plates (the totallength of combined diffusers is not limited).
Cylindrical deflectors:
Cylindrical deflectors are the most important components of a slot diffuser. They allowadjustment of both air flow rate and direction.Cylindrical deflectors are made of recycled plastics. As standard, they are black or white.
Slot diffuser face plate designs:
Slot diffuser face plates are made of linear orangular ended sections, which allow the diffusersto be joined at different angles Angular endedsections are not fitted with air direction controls.
End seals
End seals are components of the diffuser face plate.They are available in two designs:• as an angle piece (E – on both ends, ET – on
one end only) or • plates (F – on both ends, FT – on one end
only).The connecting strip-section has no end anglepieces or plates seals (designation T).
angle 90�
Position of inlet spigots:Number Standard Positionof inlet spigots length of spigots1 300 - 1000 L/22 1100 - 1500 J = 3002 1600 - 2000 J = 400
L 300 to 1000 1100 to 1500 1600 to 2000Number N u m b e r a n d d i a m e t e r o f i n l e t s p i g o t sof slots LD-13 LD-14 LD-13 LD-14 LD-13 LD-141 1 x 98 1 x 123 2 x 98 2 x 123 2 x 123 2 x 1382 1 x 138 1 x 158 2 x 123 2 x 138 2 x 138 2 x 1583 1 x 158 1 x 198 2 x 138 2 x 158 2 x 158 2 x 1984 1 x 198 1 x 223 2 x 158 2 x 198 2 x 198 2 x 223
Number and diameter of inlet spigotsStandard lenghts: from 300 mm to 1000 mmNumber of slots: 1
Standard lenghts: from 1000 mm to 2000 mmNumber of slots: 2
SLOT DIFFUSERS LD-13, LD-14
5TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Fixing of the plenum box onto LD-13, LD-14 diffusers• with self-tapping screws (designation U)• with spring clamps (designation S)• with a cross-member (designation Z)
Installation methods: • with a threaded bar (designation R)• with a wire (designation R)• with suspension brackets on the plenum box
(designation P) • with special fixing elements (designation R)• with springs (designation N)
Fixing witha cross-member (Z)
Fixing with springclamps (S)
Fixing with self-tappingscrews (U)
Installation with a threaded bar (R)
Installation with specialfastening elements (R)
Installation with springsinto ducts (N)
Installation with wire (R) Installation with suspension bracket (P)
SLOT DIFFUSERS LD-13, LD-14
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production 6
Types of air discharge
Slot diffuser with actuator controlleddischarge directionSlot diffusers with actuator controlled dischargedirection are suitable for summer-winter air supply applications. The desired direction of airjet is achieved by means of an electric actuatorwhich moves a slider. Manual adjustment istherefore not necessary. Compared with standardslot diffusers, air flow rate is reduced by 50 %.
Component Parts:1 Slot diffuser2 Deflector3 Electric actuator
In case the discharge angle is to be adjustable by means of an electric actuator (winter-summerapplication), this requirement shall be specified in the ordering form.
Top view
Every second row1 Adjustment of deflectors for warm air supply
Every second row2 Adjustment of deflectors for cold air supply
c d
gfe
a b
101ß
LD-13
LD-14
Standard(left)
Standard(vertical)
Air jet angle 60o(left)
Air jet angle 60o(right)
Air jet angle 60o(left, right)
Standard(left, right)
Standard (right)Discharge direction
Discharge angle
Min
. air
flow
rate
Max
. air
flow
rate
Discharge direction
Discharge angle
Min
. air
flow
rate
Max
. air
flow
rate
LD-13/1/B/E/K/M/S/P/I/g L=1700
SLOT DIFFUSERS LD-13, LD-14
7TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
• Please specify the deflector colour in your order. • Standard eloxal colour of the aluminium section is the original aluminium colour. Other colours shall
be specified in the order.• For the LD-13 0 and LD-14 0 type, the following end seals are available: F, FT and T.• When installing in cooling ceilings, consult the manufacturer.• In the case the slot diffuser is ordered complete with plenum box, the air jet configuration is set
as shown on the diagram on page 6.• Versions with insulation on the inside of the plenum box are also available.
Ordering key:
Length L=300, 400, 500, ..., 2000 (single piece)
Type of air discharge (a, b, c, d, e, f, g)
Thermal insulation (polyethylene), 5 mm thick, on the outside of the plenum box.sound and thermal insulation (from -40oC to 105oC), 9 mm thick, on the outside of the plenum box (synthetic rubber based material).sound and thermal insulation (from -40oC to 105oC), 19 mm thick, on the outside of the plenum box(synthetic rubber based material).
Installation with spring clamps – without plenum box (LD-13 and LD-14 only)Installation of the plenum box with hangersInstallation with brackets built in the basic section
Fixing of the diffuser to the plenum box with a cross-memberFixing of the diffuser to the plenum box with spring clampsFixing of the diffuser to the plenum box with self-tapping screws
Volume control damper
Plenum box
End sealing on both endsEnd sealing on one endEnd plate on both endEnd plate on one endRail-type without end sealings and plates
Black deflectorsWhite deflectors
Number of slots
Slot diffuser
Narrow slot diffuser
I5I9
I19
NPR
ZSU
M
K
EETF
FTT
BW
1234
LD-13LD-14
LD-13 OLD-14 O
8
Ax
LL
H1
VH1
ΔtH VLΔtL
x xALL
H1
VL
ΔtLVH1
ΔtHVL
ΔtL
1
2
3
4
100 300 500 1000 1200
LD-13
Nr. o
f slo
ts
Q(m3/hm)
LD-14
Fast selection diagram: LWA < 35 dB(A)
Technical specifications for one-slotdiffuser, per meter of lenght, at horizontal discharge:
A(m2) Q(m3/h) LWA (dB)LD-13 0,0092 135 34LD-14 0,0136 210 28
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Q (m3/h)x (m)H (m)L (m)
VL (m/s)
Δtz (K)
ΔtL (K)
Δp (Pa)LWA (db(A))
vH1 (m/s)A, B (m)
H1 (m)
Air flow rateHorizontal distance to the wallRoom heightThrow distance (L=H1+x) Air velocity at the throw distance LTemperate difference between the supply and room airDifference between the core androom air temperaturePressure dropSound power levelAir velocity at the distance H1Distance between diffusers, inlength and in widththrow distance
9
A (m)
V
(m/s
)H1
0.4
0.3
0.25
0.2
0.15
H1 (m)
1 1.2 1.6 2
LD-13 / 1 160 125 110 90 70 55 45
LD-13 / 4 325 250 215 180
LD-13 / 2 230 180 155 125 100LD-13 / 3 280 220 185 155
2 2.5 3 4 5 7 10
V
(m/s
)H1
0.3
H1 (m)
1 1.2 1.6 2
LD-13 / 1 160 125 110 90 70 55 45
LD-13 / 4 395 325 250 215 180
LD-13 / 2 230 180 155 125 100LD-13 / 3 340 280 220 185 155
2.5
0.25
0.2
0.15
0.1
2 3 4 5 7 10A (m)
V
(m/s
)L
LD-13 / 1 160 125 110 90 70 55 45
LD-13 / 4 395 325 250 215 180
LD-13 / 2 230 180 155 125 100LD-13 / 3 340 280 220 185 155
2.5
0.7
0.5
0.4
0.30.250.2
0.15
0.1
0.052 2.5 3 4 5 7 10
L (m)
LD-13 / 1 160 125 110 90 70 55 45
LD-13 / 4 325 250 215 180
LD-13 / 2 230 180 155 125 100LD-13 / 3 280 220 185 155
L (m)
0.8
V
(m/s
)L
0.6
0.5
0.4
0.3
0.25
0.2
0.15
0.12 2.5 3 4 5 7 10
2.5
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Air velocity diagrams for LD-13, at different throw distances:
One or two sided horizontal discharge:
Alternate sided horizontal discharge:
10
H1 (m)
1 1.2 1.6 2
LD-14 / 1 160 125 110 90 70 55 45
LD-14 / 4 325 250 215 180
LD-14 / 2 230 180 155 125 100LD-14 / 3 280 220 185 155
0.4
0.3
0.25
0.2
0.15
2 2.5 3 4 5 7 10
V
(m/s
)H1
A (m)
V L (m
/s)
LD-14 / 1 160 125 110 90 70 55 45
LD-14 / 4 325 250 215 180
LD-14 / 2 230 180 155 125 100LD-14 / 3 280 220 185 155
2.5
0.8
0.6
0.5
0.4
0.3
0.25
0.2
0.15
0.12 2.5 3 4 5 7 10
L (m)
H1 (m)
1 1.2 1.6 2
LD-14 / 1 160 125 110 90 70 55 45
LD-14 / 4 395 325 250 215 180
LD-14 / 2 230 180 155 125 100LD-14 / 3 340 280 220 185 155
0.30.25
0.2
0.15
0.1
2 2.5 3 4 5 7 10
V
(m/s
)H1
A (m)
2.5
LD-14 / 1 160 125 110 90 70 55 45
LD-14 / 4 395 325 250 215 180
LD-14 / 2 230 180 155 125 100LD-14 / 3 340 280 220 185 155
0.7
0.5
0.4
0.30.25
0.2
0.15
0.1
0.052 2.5 3 4 5 7 10
V
(m/s
)L
L (m)
Air velocity diagrams for LD-14, at different throw distances:
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
One or two sided horizontal discharge:
Alternate sided horizontal discharge:
Q (m3/h)
200
100
50
20
15
1086
4
3
2
1.5
1100 150 200 300 400 500 700 1000
20
25
30
35
40
45
50
55
500
1000
1500 20
00
LwA (dB(A) )
p
(Pa)
t
Q (m3/h)
200
100
50
20
108
6
43
2
1.5
1100 150 200 300 400 500 700 1000
60
500
1000
1500
2000
LwA (dB
(A) )
5550
45
40
35
30
25
20
15
10
t p
(P
a)
11
LD 13/1 LD 13/2
Sound power level and pressure drop:
Correction factors applicable to LD-13/1Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 1,44 x 0,87 x 1,34L=1000 x 1 x 3,30 x 0,85 x 3,02L=1500 x 1 x 5,26 x 0,84 x 4,47L=2000 x 1 x 7,37 x 0,81 x 5,68
Example:Q = 150 m3/hL = 1000 mmΔpt = 14 Pa (vertical; damper closed)Δpt = 14 x 3,30 = 46,2 Pa (vertical; damper closed)Δpt = 14 x 0,85 = 11,9 Pa (horizontal; damper opened)Δpt = 14 x 3,02 = 42,3 Pa (horizontal; damper closed)
LWA = 32 dB(A)
Correction factors applicable to LD-13/2Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 1,91 x 0,86 x 1,79L=1000 x 1 x 5,91 x 0,70 x 5,31L=1500 x 1 x 9,88 x 0,58 x 8,67L=2000 x 1 x 14,10 x 0,47 x 11,99
Example:Q = 150 m3/hL = 500 mmΔpt = 22 Pa (vertical; damper opened)Δpt = 22 x 1,91 = 42,0 Pa (vertical; damper closed)Δpt = 22 x 0,86 = 18,9 Pa (horizontal; damper opened)Δpt = 22 x 1,79 = 39,4 Pa (horizontal; damper closed)
LWA = 30 dB(A)
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
12
200
100
50
20
1086
43
21.5
1
500
1000
1500
2000
LwA (dB(A) )
10
Q (m3/h)
100 150 200 300 400 500 700 1000
15
20
25
30
35
4045
5060
70
75
p
(Pa)
t
200
100
50
20
1086
43
21.5
1
500
1000
1500
2000
LwA (dB
(A) )
10
15
20
25
30
35
40
45
5055
Q (m3/h)
100 150 200 300 400 500 700 1000
p
(Pa)
t
LD 13/3 LD 13/4
Correction factors applicable to LD-13/3Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 2,37 x 0,84 x 2,24L=1000 x 1 x 8,52 x 0,56 x 7,59L=1500 x 1 x 14,50 x 0,32 x 12,86L=2000 x 1 x 20,82 x 0,18 x 18,29
Example:Q = 300 m3/hL = 1000 mmΔpt = 15 Pa (vertical; damper opened)Δpt = 15 x 8,52 = 127,8 Pa (vertical; damper closed)Δpt = 15 x 0,56 = 128,4 Pa (horizontal; damper opened)Δpt = 15 x 7,59 = 113,8 Pa (horizontal; damper closed)
LWA = 29 dB(A)
Correction factors applicable to LD-13/4Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 3,08 x 0,70 x 2,91L=1000 x 1 x 11,07 x 0,47 x 9,87L=1500 x 1 x 18,85 x 0,27 x 16,72L=2000 x 1 x 27,07 x 0,15 x 23,78
Example:Q = 300 m3/hL = 500 mmΔpt = 35 Pa (vertical; damper opened)Δpt = 35 x 3,08 = 107,8 Pa (vertical; damper closed)Δpt = 35 x 0,70 = 024,5 Pa (horizontal; damper opened)Δpt = 35 x 2,91 = 101,8 Pa (horizontal; damper closed)
LWA = 33 dB(A)
Sound power level and pressure drop:
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
13
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Sound power level and pressure drop:
Correction factors applicable to LD-14/1Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 1,81 x 0,76 x 1,31L=1000 x 1 x 3,83 x 0,42 x 3,23L=1500 x 1 x 5,80 x 0,28 x 5,11L=2000 x 1 x 7,87 x 0,19 x 7,07
Example:Q = 300 m3/hL = 1000 mmΔpt = 33 Pa (vertical; damper opened)Δpt = 33 x 3,83 = 126,4 Pa (vertical; damper closed)Δpt = 33 x 0,42 = 14,0 Pa (horizontal; damper opened)Δpt = 33 x 3,23 = 107,0 Pa (horizontal; damper closed)
LWA = 38 dB(A)
Correction factors applicable to LD-14/2Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 2,11 x 0,53 x 1,59L=1000 x 1 x 8,84 x 0,29 x 7,96L=1500 x 1 x 15,36 x 0,20 x 14,14L=2000 x 1 x 22,32 x 0,14 x 20,70
Example:Q = 300 m3/hL = 500 mmΔpt = 47 Pa (vertical; damper opened)Δpt = 47 x 2,11 = 99,2 Pa (vertical; damper closed)Δpt = 47 x 0,53 = 24,9 Pa (horizontal; damper opened)Δpt = 47 x 1,59 = 74,7 Pa (horizontal; damper closed)
LWA = 36 dB(A)
200
100
50
20
10
6
4
2
1.5
1
5001000
1500
2000
p
(Pa)
t
LwA (dB(A) )
15
Q (m3/h)
100 150 200 300 400 500 700 1000
20
25
30
3540
45
50
8
3
200
100
50
20
108
6
43
2
1.5
1
500
1000
1500
2000
p
(Pa)
t
LwA (dB(A) )
15
Q (m3/h)
100 150 200 300 400 500 700 1000
20
25
30
35
4045
50
LD 14/2LD 14/1
14
200
100
50
20
108
6
43
2
1.5
1
500
1000
1500
2000
p
(Pa)
t
15
Q (m3/h)
100 150 200 300 400 500 700 1000
LwA (dB(A) )
20
25
30
35
4045
50
200
100
50
20
1086
43
21.5
1
500
1000
1500
2000
p
(Pa)
t
LwA (dB(A) )
15
Q (m3/h)
100 150 200 300 400 500 700 1000
520
25
30
35
40
LD 14/3 LD 14/4
SLOT DIFFUSERS LD-13, LD-14 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Sound power level and pressure drop:
Correction factors applicable to LD-14/3Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 2,41 x 0,33 x 1,87L=1000 x 1 x 13,86 x 0,19 x 12,69L=1500 x 1 x 24,92 x 0,16 x 23,17L=2000 x 1 x 36,76 x 0,13 x 31,33
Example:Q = 600 m3/hL = 1000 mmΔpt = 18 Pa (vertical; damper opened)Δpt = 18 x 13,86 = 249,5 Pa (vertical; damper closed)Δpt = 18 x 0,19 = 3,4 Pa (horizontal; damper opened)Δpt = 18 x 12,69 = 228,4 Pa (horizontal; damper closed)
LWA = 38 dB(A)
Correction factors applicable to LD-14/4Type of discharge vertical horizontalFlow rate control damper open closed open closedL=500 x 1 x 3,14 x 0,28 x 2,43L=1000 x 1 x 18,02 x 0,15 x 16,50L=1500 x 1 x 32,34 x 0,13 x 28,12L=2000 x 1 x 47,79 x 0,10 x 39,63
Example:Q = 600 m3/hL = 500 mmΔpt = 70 Pa (vertical; damper opened)Δpt = 70 x 3,14 = 219,8 Pa (vertical; damper closed)Δpt = 70 x 0,28 = 19,6 Pa (horizontal; damper opened)Δpt = 70 x 2,43 = 170,1 Pa (horizontal; damper closed)
LWA = 36 dB(A)
15
41
205
15
7.5
147
80φ7
860
4
3
2
1
SLOT DIFFUSERS LD-15
RAL
Slot diffuser LD-15
Application:Slot diffuser LD-15 is designed to supply air inrooms with floor to ceiling heights from 2.5 to 4m.They are primarily designed for the supply of coldair in applications with high comfort demands.
Description:LD-15 slot diffuser is of a one-slot construction. The diffuser face plate consists of aluminium sections with built-in cylindrical deflectors madeof recycled plastics. Individually adjustable deflectors allow continuous adjustment of discharge angle within the 3600 range, as well asadjustment of air flow rate. The diffuser air flowcan be completely shut by means of the cylindricaldeflectors. The plenum box is made of galvanisedsheet steel.
Component Parts:
1 Plenum box2 Inlet spigot3 Main section4 Cylindrical air deflector
No. of spigots Standard lengths (L)
1 300, 400, 500, 600, 700800, 900, 10001100, 1200, 1300, 1400
2 1500, 1600, 1700, 18001900, 2000
Position of inlet spigots
The positions of inlet spigots are equal to those ofLD-13 and LD-14 slot diffusers. See diagram andtable on page 4.
Slot diffuser face plate designs
Slot diffuser face plates are made of linear orangular ended sections, which allow the diffusersto be joined at different angles. Angular endedsections are not fitted with air direction controls.
Cylindrical air deflectors
Cylindrical deflectors are the most important com-ponents of a slot diffuser. They allow free adjust-ment of the air flow rate.
Joining slot diffusers together in length
Sections can be joint together by means of connecting plates. Total length of so joint sectionsis not limited.
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Installation openings:15 x L (diffuser length)
CD
LD-15/B/K/M/S/P/I L=1500
16
SLOT DIFFUSERS LD-15
Fixing of the diffuser to the plenum box with self-tapping screws (U)
Fixing of the diffuser to the plenum box with a spring clamps (S)
Installation with suspensionbrackets on the plenum box (P)
Installations with suspension bracket on the main section (R)
Ordering key:
Length L=300, 400, 500, 600 ..., 2000 (single piece)
Thermal insulation (polyethylene), 5 mm thick, on the outside of the plenum box.Sound and thermal insulation (from -40oC to 105oC), 9 mm thick, on the out-side of the plenum box (synthetic rubber based material).Sound and thermal insulation (from -40oC to 105oC), 19 mm thick, on theoutside of the plenum box (synthetic rubber based material).
Installation of the diffuser with suspension brackets on the plenum boxInstallation with suspension brackets on the main section
Fixing of the diffuser to the plenum box with a spring clamp Fixing of the diffuser to the plenum box with self-tapping screwsVolume control damperPlenum box
Black deflectorsWhite deflectors
Installation methods:
• Installation with suspension brackets onthe plenum box (designation P)
• Instalaltion with suspension brackets on themain section (designation R)
Fixing of the plenum box onto a LD-15 slotdiffuser:
• with self-tapping screws (designation U)• with spring clamps (designation S)
• Please specify the deflector colour in your order.• Standard eloxal colour of the aluminium section
is the original aluminium colour. Other colours shall be specified in the order.
• When installing in cooling ceilings, consult the manufacturer.
• Versions with insulation on the inside of the plenum box are also available.
I5I9
I19
PR
SUMK
BW
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
17
L= 500
L=1500
L=1000
L=2000
50 100 150 200
Q (m3/hm)
250
LWA<35 dB(A)
LWA35-45 dB(A)
0.4
0.3
0.25
0.2
0.15
V
(m/s
)H1
2 2.5 3 4 5 7 10A (m)
H1 (m)1 1.2 1.6 2
LD-15 / 1 160 125 110 90 70 55 45
0.4
0.3
0.25
0.2
0.15
LD-15 / 1 160 125 110 90 70 55 45
V
(m/s
)L
2 2.5 3 4 5 7 10L (m)
2.5
0.5
0.6
0.8
0.1
0.1
0.25
0.2
0.15
V
(m/s
)H1
2 2.5 3 4 5 7 10A (m)
H1 (m)1 1.2 1.6 2
LD-15 / 1 160 125 110 90 70 55 452.5
2 2.5 3 4 5 7 10L (m)
LD-15 / 1 160 125 110 90 70 55 45
0.7
0.5
0.4
0.30.250.2
0.15V
(m/s
)L
0.1
0.05
Technical data:
Free surface, per 1 m of length: Aef=0.004559 m2.Air flow rate per 1 m of length: Q=20-70 m3/hm.
Fast selection diagram:
SLOT DIFFUSERS LD-15 TECHNICAL DATA
One or two sided horizontal discharge:
Alternate sided horizontal discharge:
Air velocity diagrams, at different throw distances:
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
18
αα
200
100
50
20
10
6
43
21.5
1
500
1000
1500
p
(Pa)
t
15
10 20
Lwa (dB(A))
30 40 50 60 80 100 150 200 250
1000
10
20
25
30
35
40
45
50
55
Q (m3/h)
α=0� α=45� α=90�Q (m3/h) 100 150 200 100 150 200 100 150 200L=500 Data in the diagram +5 +7 +10 +15 +32 +35L=1000 Data in the diagram +10 +12 +15 +33 +62 +100L=1500 Data in the diagram +4 +4 +8 +32 +63 +106L=2000 Data in the diagram +1 +2 +3 +27 +55 +81
α = 0� Control damper in the inlet spigot is fully openedα = 45�Control damper in the inlet spigot is half openedα = 90� Control damper in the inlet spigot is fully closed
α=0 α=45� α=90�Q (m3/h) 100 150 200 100 150 200 100 150 200L=500 Data in the diagram +5 +7 +5 +12 +28 +60L=1000 Data in the diagram +8 +25 +33 +29 +66 +116L=1500 Data in the diagram +4 +11 +14 +29 +63 +101L=2000 Data in the diagram +1 +5 +7 +23 +52 +87
α = 0� Control damper in the inlet spigot is fully openedα = 45�Control damper in the inlet spigot is half openedα = 90� Control damper in the inlet spigot is fully closed
ΔPt correction (in Pa) in cases of verticaldischarge
Sound power level and pressure drop
ΔPt correction (in Pa) in cases of inclineddischarge
SLOT DIFFUSERS LD-15 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
19
RAL9010
15 130 15
57
100
18.5
8.5
150
32
180
45.5
230
59
280
72.5
330
86
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
FLOOR SLOT DIFFUSERS LD-16N
Floor Slot Diffusers LD-16N
Application:LD-16N floor slot diffusers are a suitable solutionfor swimming pools and similar rooms with largeglass surfaces and windows. They are designed forinstallation in the floor. Warm air is supplied in theupwards direction, towards the window. Withappropriate dimensions, proper air supply isguaranteed, free of excessive draught or noise(LWA<35 dB(A)).
Description:LD-16N slot diffusers are designed in 1, 2, 3, 4, 5and 6 slot versions. They are made of fixedaluminium sections and an aluminium structuralframe.The diffusers are available in single piece lengths200 mm to 2000 mm. Painting according to thecustomer’s specification is available on order.
Advantages:• no glass misting• optimal ventilation• no heat losses• low pressure drop• prevents the descent of cold air along windows• does not cause heating of air near the windows
even in the sunshine• easy installation
Versions:
single slot LD-16N/1 two slots LD-16N/2 three slots LD-16N/3
four slots LD-16N/4 five slots LD-16N/5 six slots LD-16N/6
20
3
21
max 0.2 m
5
10
15
20
25
1000 2000 3000 4000 6000 7000 8000Q (m3/h)
LD
-16
/1
LD
-1N/
2
L D-1
6/3
L D-16N /4
L D -16N /5
L D -16N/6
5000
L (m
)
vef
N
6
N
LD-16N / 1 / L / n
FLOOR SLOT DIFFUSERS LD-16N INSTALLATION
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
number of longitudinal sections (pieces)
Single piece length (L = 200, 300,......2000)
Number of slots
Floor slot diffuser
123456
LD-16N
Installation Method:
Fast selection diagram:
LwA < 35 dB(A); Vef =2,5 m/s; Δpt = 80 Pa/m
1 glass2 LD 16N slot diffuser3 air supply channel
Q (m3/h)LWA (db(A))
Δpt (Pa)L (m)
vef (m/s)
Air flow rateSound power levelPressure dropSlot diffuser lengthEffective air velocity
Example
The available floor area next to the glass surfaceis 15 m in length. The calculated supplied air flowrate is 4000 m3/h. From the diagram, the type: LD-16N/3 L=15m is selected.
Ordering key:
Standard colour is RAL 9010.
21
1
2
3
4
5 φ C3
φ A
H
9
φ D
RAL
8
7
6
PANEL DESIGN SLOT DIFFUSERS LDP-13, 14
TECHNICAL CATALOGUE IMP Klima d.o.o., Air conditioning systems production
LDP-13 LDP-14Size φ C3 Slot length φ A φ D H No. of slots h No. of slots h400 395 300 370 198 320 8 25 6 40500 495 400 470 198 320 10 6600 595 500 570 248 380 12 25 8625 620 500 570 248 380 12 8
Component parts:
1 Plenum box2 Volume control damper3 Inlet spigot4 Cross member5 Diffuser face plate6 Guide7 Air deflector8 Spring clamp
Panel design slot diffusers LDP-13, LDP-14
Application:Panel design slot diffusers are designed for thesupply of air in rooms with floor to ceilingheights from 2.4 m to 4 m. They are suitable for supplying either cold or warm air.
Description:LDP-13 and LDP-14 consists of a diffuser faceplate and a plenum box. The diffuser face plate iscommonly made of sheet steel and its designcan be suited to the customer’s requirements.Longitudinal guides, fitting tight to the sheetsteel, are inserted in the diffuser face plate.Cylindrical deflectors, made of recycled plastics(ABS-antistatic) are installed in the guides, toallow free adjustment of both air jet dischargedirection and flow rate. The number of slots perunit depends on the size of the unit. Diffuser faceplate is powder painted in a RAL 9010 scalecolour, or, on special orders, in other colours.The deflectors, equal to those of LD-13 or LD-14slot diffusers, are white or black as standard.The plenum box is made of galvanised sheetsteel. It is fitted with a flow rate control damper,designed for fine air flow rate adjustment.
25 40
Dimensions:
Types:
• LDP-13 m = 12 mm• LDP-14 m = 22 mm
St
22
LDP-13/B/K/M/I
PANEL DESIGN SLOT DIFFUSERS LDP-13, 14
TECHNICAL CATALOGUE IMP Klima d.o.o., Air conditioning systems production
Special orders:
On special order, we can deliver diffuser faceplates of any design. The shape and dimensionsare specified in agreement with the designer orcustomer.
Technical data:
Tecnical data are determined upon the definitionof the shape, design, number of discharge slotsand other factors.
Size (400, 500, 600, 625)
Thermal insulation (polyethylene), 5 mm thick, on the outside of the plenum box.sound and thermal insulation (from -40oC to 105oC), 9 mm thick, on the outside of the plenum box (synthetic rubber based material).sound and thermal insulation (from -40oC to 105oC), 19 mm thick, on the outside of the plenum box (synthetic rubber based material).Volume control damper
Plenum box
Black deflectorsWhite deflectors
• Please specify the deflector colour in your order. • Versions with insulation on the inside of the plenum box are also available.
Size 400
Fast flow rate determination (at LWA < 35 db(A)):
LPD-13: flow rate per 1 meter length ≈100m3/hLPD-14: flow rate per 1 meter length ≈150m3/h
Ordering key:
I5I9
I19
M
K
BW
LDP-13LDP-14
23
RAL9010
RAL9010
Dφ
60 60L
Lv
A
60L
Lv
L5
LvL
60
d
23 1
LD L LV
/ 1000 800
1505 750 2 X 500
1755 875 2 X 600
2005 1000 2 X 800
Round Duct Diffuser SKD-13
Application:Round duct diffusers SKD-13 are designed for supplying air to the roomswith large floor to ceiling heights, e.g. conference halls, gyms, industrialhalls etc. They can be installed at any location within the duct network,which renders them suitable for supplying of either hot or cold air.The T register model is designed to control the supply air flow-rate at theindividual diffuser level. The T register design is recommended forinstallations with several round duct diffusers in one line. In such cases,the flow-rates of the diffusers near the line beginning should be slightlyreduced, in order to supply adequate amounts of air to the diffusersfarther along the line.
Description:The duct diffuser consists of galvanised round cross-section tubes withinserted longitudinal guides, fitting tight into the tubes. Cylindricaldeflectors made of recycled plastics are inserted into the guides, to allowcontinuous adjustment of discharged air direction within the 360o range.Diffusers are available with different number of slots. The tube is painted ina RAL 9010 scale colour, or, on special orders, in other colours. Thedeflectors, equal to those of LD-13 slot diffusers, are white or black asstandard.A T register, black in colour, is inserted in the SKD-13D/T. The T registeris adjusted by means of a PVC knob, screwed onto a threaded bar.
Components:1. SKD-13D2. T-register3. T-register adjusting knob
ROUND DUCT DIFFUSER SKD-13
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
St
Diffuser structure for lengths exceeding 1000 mm:
Note: φ D is the diffuser internal diameter.
φD/no.of 2 4 6 8 10 12 14Slots Slots Slots Slots Slots Slots Slots Slots150
160
180
200
225
250
280
300315355400450500560600630710800900
Dimensions:
24
L L87 87
φD
L
Lv
L
H
60
Ød
4020
Ød
4040
7
Ød
407
L
r
ROUND DUCT DIFFUSER SKD-13
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Installation of SKD-13/R:
SKD-13/D Joining piece
Tube Joiningpiece
SKD-13/D
SKD-13/R
SKD-13/R is constructed for installations into round ducts with squareopenings.
Installation of SKD-13/R:
L Lv H No. of øD of tube Installation openingsslots L-35 H-35
580 500 100 1 150-355 545 65680 600 150 2 355-900 645 115880 800 200 3 600-2400 845 165880 800 250 4 600-2400 845 215
Size d L,r150 148.7-149.3 150160 158.7-159.3 160180 178.6-179.3 180200 198.6-199.3 200224 222.5-223.3 224250 248.5-249.3 250280 278.4-279.3 280300 298.4-299.3 300315 313.4-314.3 315355 353.3-354.3 355400 398.3-399.3 400450 448.2-449.3 450500 498.2-499.3 500560 558.1-559.3 560630 628.1-629.3 630710 708.0-709.3 710800 798.1-799.3 800900 897.0-899.3 900
Accessories:
Elbow 900
Joining piece
End cover
Note: φd is the external diameter.
25
SKD-13D /B /T /φ 355 /2 SKD-13R /B /T /φ355 /2
ROUND DUCT DIFFUSER SKD-13 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
• Please specify the deflector colour in your order.
L=1000 mmOrdering key for SKD-13D:
L=680 mm, H=150 mmOrdering key for SKD-13R:
length
number of slots
tube diameter
T-register
Black deflectors
White deflectors
tube
Example accessory specification:Accessory: Elbow 900
Colour: RAL 9010Quantity: 1 piece
BW
length
number of slots
tube diameter
T-register
B Black deflectorsW White deflectors
R diffuser designed for installation into round ducts
26
ROUND DUCT DIFFUSER SKD-13 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Pressure drop determination diagram
Fast selection diagram Example
Air flow rate: Q=250 m3/hNominal size: 450 mmAppropriate number of slots is: 4
125 250 375 500 625 750 825
φ150 - φ250
φ500 - φ900
φ280 - φ355
φ400 - φ450
2 4 6 8 10 12 14
Nom
inal
size
φ m
m
Number of slots
Air flow rate (m3/hm)
LWA < 35 dB(A)
Q (m3/h)ΔPt (Pa)
Nom
inal
φ Air velocity in the duct v(m/s)
27
0
5
10
15
20
25
30
35
40
45
0 125 2501
625500 750 825 950
Q (m3/h)
Δp t
(Pa)
v=2
v=2
v=2
v=2
v=4
v=4
v=4
v=6
v=6
v=6
v=6
v=4
SKD-13 φD 150-900 n=2
SKD-13 φD 150-900 n=4
SKD-13 φD 280-900 n=6
SKD-13 φD 400-900 n=8
SKD-13 φD 400-900 n=12
SKD-13 φD 400-900 n=14
v=2 (m/s)
v=4
v=6
v=2
v=4
v=6
v=2
v=4
v=6
SKD-13 φD 400-900 n=10
v=2
v=4
v=6
v=2
v=2
v=2
v=4
v=4v=6
v=6
v=6
v=4
150-900 n=2
SKD-13 φD 150-900 n=4
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=4
=2
SKD-13 φD 150-900 n=4
v=2 (m/s)
v=4
v=6
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
4
2
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
SKD-13 φD 150-900 n=4
v=2 (m/s)
v=4
v=6
v=2
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
3752
v=2
v=2v=4
v=4
v=6
SKD-13 φD 150-900 n=4
v=2 (m/s)
v=4
v=6
v=2
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
SKD 13 φD 150 900 n=4
v=2 (m/s)
v=4
v=6
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
SKD 13 φD 150 900 n 4
v=2 (m/s)
v=4
v=6
v=2
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=4
v=6
v=2
v=4
v=6
v=2
v=2v=4
v=4
v=6
v=2 (m/s)
v=4
v=6
v=6
v=2
v=4
v=6
Example 1
Nominal size: φ 500 mm Number of slots: 6Air velocity in the duct: 4 m/sFlow rate through SKD: Q=450 m3/hPressure drop: 15,5 Pa
Example 2
Max. pressure drop: 30 PaAir velocity in the duct: 6 m/sFlow rate through SKD: Q=400 m3/hUnit to be chosen: SKD-13 φ400-900; n=8 Pressure drop: 27 Pa; LWA<35db(A)
ROUND DUCT DIFFUSER SKD-13 TECHNICAL DATA
TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Pressure drop determination diagram
v .......Air velocity in the duct
28 TECHNICAL CATALOGUE Hidria IMP Klima d.o.o., Air conditioning systems production
Production: Hidria IMP Klima; Layout: Grafi~ni studio K, d.o.o.; Print: Tiskarna Impress, d.d.; October 2007
Hidria IMP Klima d. o. o.Godovič 1505275 GodovičSLOVENIAT: +386 5 374 30 00F: +386 5 374 30 82E: [email protected]