SmartGuard ®
Made in the USA
SmartGuard’s sturdy PRE-FAB LINE offers steel-like performance while saving 50-75% in material cost over metal alternatives. Multigang and combination covers save even more time, using less screws to install. Clear material allows easy identification of device orientation and color. No more stickers or markings required. Proven in use by nationally recognized companies, these covers are fully warranted against any device damage caused by standard of the industry drywall installation and finishing.
These covers are tough!
Pre-Fab andDevice Covers
Temporary SafetyCovers
Mudring Covers
OctagonBox Covers
Pipe Caps
4 SquareBox Enclosures
SmartGuardCovers.com
Click to Email usor call360.598.190722287 Stottlemeyer Road NEPoulsbo, WA 98370
For more info
SmartGuard Pre-Fab DeviceGuards• Steel Like Performance • Sheetrock Routers will not cut• Multigang and Combo Covers • Fully Warrantied • Clear material, easy ID of Devices • Recyclable
Save on Labor
and Material Cost with
Clear Cover for Electrical Devices
Made in the USADCP-1 1 Gang Duplex Cover
DCP-3 3 Gang Duplex Cover
DCP-4T 4 Gang Toggle Cover
DCP-1T 1 Gang Toggle Cover
DCP-2D 2 Gang GFCI/Decorator Cover
DCP-4D 4 Gang GFCI/Decorator Cover
DCP-2 2 Gang Duplex Cover
DCP-3T 3 Gang Toggle Cover
DCP-4 4 Gang Duplex Cover
DCP-1D 1 Gang GFCI/Decorator Cover
DCP-2T 2 Gang Toggle Cover
DCP-3D 3 Gang GFCI/Decorator Cover
DCP-DT1 2 Gang GFCI/Toggle Switch Combo
DEVICE GUARDS for Pre Fab offer steel like performance while saving substantial savings in Labor and Material costs. Multi gang and combination covers save even more time, using fewer screws to install than conventional single gang covers. Clear material allows easy identification of device orientation and color, plus eliminating the need for markings or stickers. These covers are fully warranted against any device damage caused by standard of the industry drywall installation and finishing. These covers are Tough!
• Clear material provides easy view of device color and orientation
• Reduce Labor and Material costs• Multigang and combination applications• Steel-like performance• Sheet rock routers will not cut through covers• Used by nationally recognized companies• Fully warrantied against device damage
• Recyclable and proudly made in the USA
Pre-Fab Device Covers for GFCI/Decorator, Duplex and Toggle Switches
•ULSTANDARD514C (NON-CONDUCTIVE AND FLAME RATED)•CERTIFIEDASTMSTANDARD D1790&D638 (IMPACT & TENSILE STRENGTH)
PREFABBENEFITSARECLEAR.Our Products Meet:
PART # DESCRIPTION
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
These covers are TOUGH!
SmartGuard ®
Clear Cover for Electrical Devices
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
SmartGuard ®
Clear Cover for Electrical Devices
SAFETY COVERS for BREAKER BOXES and PANELS satisfy OSHA requirements and meet related ANSI codes.
Clear Temporary Safety Covers for Breaker Boxes and Panels are the best choice for effective holding power and easy view of panel breakers, conduit status and over-all viewing of panel condition. Made from strong durable PVC, these covers are not only puncture
values as well.
• Clear PVC allows covers to stay in place for easy viewing of panel condition
• Strong dielectric properties keep workers safe•• 14” and 20” kits available – adjustable to all sizes
of openings• Strong holding power – covers stay in place and
won’t fall off• Economical pricing – recyclable• OSHA approved – meets related ANSI code
requirements• Convenient low volt covers available
• Recyclable and made in the USA
Recently used at Spokane Falls Com-munity College (53 panel covers), the Electrical Contractor gave their highest recommendation for this product.
Our Products Now Meet:• UL STANDARD 514C
(DIELECTRIC STRENGTH & FLAMMABILITY)
• CERTIFIED ASTM STANDARD D1790 & D638 (IMPACT & TENSILE STRENGTH)
NEW RATING!
Made in the USA
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
SmartGuard ®
Clear Cover for Electrical Devices
COMMERCIAL MUDRING COVERS provide convenient protection for wiring and plugtail applications.
Commercial MudRing Covers
• Covers keep drywall tools and hands from contacting live wire. Simply remove the cover and get on with a faster and cleaner trim stage.
• Easy protection
• Install at rough-in, easy view of wiring
• Inspection with covers in place
• Keep boxes clean throughout the construction process
• Recyclable and economical
• Made in the USA
Made in the USA
MR1 1 Gang Mud Ring Cover
MR2 2 Gang Mud Ring Cover
MR4 4 Gang Mud Ring Cover
MR3 3 Gang Mud Ring Cover
MR0 3” Round Mud Ring Cover
• UL STANDARD 514C (DIELECTRIC STRENGTH & FLAMMABILITY)
• CERTIFIED ASTM STANDARD D1790 & D638 (IMPACT & TENSILE STRENGTH)
THE BENEFITS ARE CLEAR.
PART # DESCRIPTION
Octagon Concrete Box Cover
SGCBOSmartGuard Octagon Concrete Box Cover
Part Octagon Concrete Box Cover
Dimension 4 x 4 x .5
Application Seals out concrete from bottom of octagon box
Installation Method Insert flange side out into opening
Removal Method Pull cover straight out or collapse inward and remove
Mil/Thickness 15 mil
Item Weight .2 oz.
SmartGuard’s NEW OCTAGON CONCRETE BOX COVER for parking garages, post tension slabs and concrete walls.
The Benefits are clear.• Quicker and easier than duct tape
• Seals out concrete products
• Easy snap in fit
• Allows box to sit flat to plywood form
• Strong PVC material
• Economical
• Recyclable and Made in the USA
SmartGuard’s NEWEST release of a handy cover
for sealing the bottom of your concrete box and
eliminating the need for time consuming use of duct
tape. This cover install in seconds, completely seals
out concrete intrusion and allows the box to sit flatter
against plywood forms.
SGCBO
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
SmartGuard ®
Clear Cover for Electrical Devices
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
SmartGuard ®
Clear Cover for Electrical Devices
SmartGuard’s NEWEST release of Yellow Caps are the quickest way to seal PVC Pipe ends, bell ends, couplings
need for the time consuming use of duct tape or expensive cone type solutions.
seconds, com pletely sealing out dirt and concrete products - Bright yellow color easily lets you see Yellow Caps in place – Economical and Recyclable - all our SmartGuard products are proudly made in the USA!!
• Convenient sizes include 3/4“ through 6”
• Save Time, Yellow caps are quicker and easier than Duct TAPE
• Save money over expensive alternatives• Bright yellow color makes caps easily visible• Seals out dirt and concrete products• Made from strong PVC material• Recyclable and economical• Made in the USA
SmartGuard’s NEW YellowCapsYellowCapsSmartGuardSmartGuard
ddddS dS dS dS dS dS dS dS dS dS dS dS dS dS dS dS dS rS rS rrm rm rm rmartGuarS tG dSmartGuardSmartGuardSmartGuardS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GGGGGGGGGSmartGua ddSmartGua dSmartGua dSmartGua dSmartGua dSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuarSmartGuarSmartGuarSmartGuarSmartGuarSmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuar
NEW
Made in the USA
22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]
SmartGuard ®
Clear Cover for Electrical DevicesFour Square Box Enclosure
SG4SQESmartGuard Four Square Box Enclosure
Part Four Square Box Enclosure
Dimension 4.125 x 4.125 x 2.25
Application Seals electrical boxes from masonry products and air movement
Installation Method Place cover over back of box and close lid over mudring, snap interlock at four sides
Removal Method Unsnap interlock at four sides, and open lid from over mudring and remove
Mil/Thickness 15 mil
Item Weight .4 oz.
SmartGuard introduces its NEW LINE of FOUR SQUARE BOX ENCLOSURES designed to help streamline and reduce labor and material costs in masonry applications, provide sound proofing and eliminate air drafts.
The Benefits are clear.• One piece box enclosure and lid installs in seconds
• Seal electrical box from masonry products
• Eliminates cold air drafts and unwanted air
movement between spaces
• Economical pricing
• Available masonry bracket securely holds face
of mudring flush with masonry blocks during
construction
• Recyclable and Made in the USA
Normally in a masonry application the boxes arewrapped with duct tape to seal out masonry products.That time consuming task is now replaced witheasy to use fully sealed SmartGuard FOUR SQUAREENCLOSURES. Simply install over box, close lid overmudring, cut for knock outs and you’re done. Very simpleand quick. This same cover is also used to completelyseal out air movement and drafts at interior or exteriorwalls. Great reviews from an established assembly shopon their recent purchase of 4,000 SmartGuard masonryenclosures. Time savings were HUGE!
SG4SQE