Download - SMPS Lecture 1
![Page 1: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/1.jpg)
Switch Mode Power Supplies:From Circuit Theory to the Workbench
Michael TsePower Electronics Research CentreDepartment of Electronic & Information EngineeringHong Kong Polytechnic University
![Page 2: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/2.jpg)
Michael Tse: Switch Mode Power Supplies 2
Prelude
How much can we trust the theory?What can we do if the theory doesn’t match the outcome?Can we live without heuristics?Are complex models always better?What makes the engineers lose faith in the theory?Can theory really be used in practice?
How can we get the most of circuit theory forpractical design and analysis?
![Page 3: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/3.jpg)
Michael Tse: Switch Mode Power Supplies 3
The theorists at fault!!My EMI filter isn’t quite doing what it is supposed to do. Letme change the order and a different filter configuration, andtry again.
I need to derive a more accurate model for my powerconverter, preferrably up to 10 times the switchingfrequency.
Oh! I have found the answer from my algebra. A duty cycleof 1.2 for this theoretical power factor control!! How could Iachieve this?
![Page 4: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/4.jpg)
Michael Tse: Switch Mode Power Supplies 4
The engineers at fault!!The snubber gets pretty hot. Let me choose a smallerresistance.
I would tend to think that the transformer has splitcharacters. The flyback transformer has never convinced methat it is related to the forward transformer.
Air gap stores more energy.
The output voltage of my constant-power-controlled circuitisn’t high enough. Let me get a few more turns in thesecondary.
![Page 5: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/5.jpg)
Michael Tse: Switch Mode Power Supplies 5
Objectives
To show how one can arrive at a practical circuit fromconsideration of basic circuit theory.
To show how circuit theory can be used to explainphenomena observed in practical circuits.
To show how a switch mode power supply can besystematically cons-tructed, starting from the simplestconverter topology.
![Page 6: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/6.jpg)
Michael Tse: Switch Mode Power Supplies 6
Contents
Basic topologies and practical requirementsHow theory solves problems:
First problem: practical transformerSecond problem: real device switchingThird problem: closed-loop controlFourth problem: isolationFifth problem: input filter
Conclusion
![Page 7: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/7.jpg)
Michael Tse: Switch Mode Power Supplies 7
Genesis of convertersAim: To convert controllable powerfrom a voltage source to a load,with NO LOSS.
Source Load
?
Lossless
Controllable
Simple
Kirchhoff’s laws restrict terminalconditions.
Source Load
?
Lossless
Controllable
Simple
![Page 8: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/8.jpg)
Michael Tse: Switch Mode Power Supplies 8
An old solutionLossy linear regulator
Source Load
![Page 9: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/9.jpg)
Michael Tse: Switch Mode Power Supplies 9
Elements wantedLossless requirements
current sinking for inputcurrent sourcing foroutput
IdeasAn inductor switchingbetween source and loadRelative sourcing andsinking durations wouldcontrol the energy flow
Bear in mind whatKirchhoff’s laws say:
Inductors must not be leftopen.
-> An inductor switchingbetween source and load.
-> At least one current pathmust be available at alltimes.
-> At least two switches areneeded to divert theinductor current
-> THREE POSSIBILITIES
![Page 10: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/10.jpg)
Michael Tse: Switch Mode Power Supplies 10
Three possibilities
Boost
Buck-boost
Buck
Source LoadiL
Source Load
iL
Source Load
L
![Page 11: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/11.jpg)
Michael Tse: Switch Mode Power Supplies 11
The buck converterSwitch S is turned on and off very quickly, at a rate muchgreater than the output filter natural frequency
Control parameter is duty cycle
iLLS
D
ON
OFF+
–E
+
–U
dS t
T
Duration when is on
Periodon= =
![Page 12: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/12.jpg)
Michael Tse: Switch Mode Power Supplies 12
Steady-state operationSuppose we fix the duty cycle and wait until a steady state isreached.Inductor current goes up during the ON time, and goes down duringthe OFF time.
Periodic operation forces
Increment during ON = Decrement during OFF
⇒−
=−
⇒ = ×
( ) ( )E U DT
L
U D T
L
U D E
1
![Page 13: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/13.jpg)
Michael Tse: Switch Mode Power Supplies 13
Putting it to practiceWe need
transformer isolationclosed-loop controldrivers for MOSFETsself start-upsnubbers as switching aidsprotectioninput EMI filterProper component selectionmechanical design: heat sink, layout, packaging, etc
DirectMandatoryRequirements
IndirectMandatoryRequirements
RegulatoryRequirements
![Page 14: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/14.jpg)
Michael Tse: Switch Mode Power Supplies 14
Practical circuit requirementForward converter—transformer isolatedbuck converter
?
Does it work?
?
driver
EMI filter needed
ControlIC andcircuits
?
isolation?
?
start-up
fromaux
output
? ?
EMI
protection (over I / V)
![Page 15: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/15.jpg)
Michael Tse: Switch Mode Power Supplies 15
First problem: practical transformer
The previous forward converter worked only if thetransformer were ideal.However, practical transformers have magnetisinginductance.
L m
Ideal transformer
1:n
v nv
in
i
2 =
=
1
2 11
![Page 16: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/16.jpg)
Michael Tse: Switch Mode Power Supplies 16
What the theory says?
If we have to use a transformer for the forwardconverter, the transformer should be idea.That means INDEFINITELY LARGE magnetizinginductance.
⇓Either an infinitely permeable core
OR an infinite number of turns
THAT’S IMPOSSIBLE!!
![Page 17: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/17.jpg)
Michael Tse: Switch Mode Power Supplies 17
Probing further into the theory
First, consider the ON time.
Ideal transformer
1:n
Practical transformer
What happens when the FET is off?
Secondary of T/F hasno current.
↓Primary has no currenteither.
↓Current in magnetisinginductance can gonowhere!!
![Page 18: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/18.jpg)
Michael Tse: Switch Mode Power Supplies 18
Deriving solution: core reset
A path must exist during OFF time to bring themagnetizing current back to zero
Circuit theory works and explains everything!
Ideal transformer
1:n
Practical transformer
+
–Vz
0A0A
+
– –
+
![Page 19: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/19.jpg)
Michael Tse: Switch Mode Power Supplies 19
Waveforms (with core reset)Secondary current of ideal t/f
same asabove;scaled by factor n
0
0
Primary current of practical t/f
Primary current of ideal t/f
Magntizing current
slopecontrolledby outputinductance
![Page 20: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/20.jpg)
Michael Tse: Switch Mode Power Supplies 20
Requirements for core reset
Negative voltage polarity applied to the windingduring OFF time.This voltage must be large enough to bring themagnetising current back to zero.
If d = 0.5, then .
If d = 0.8, then .
Technique: clamping the voltage during OFF time.
V Vz in≥
V Vz in≥ 4
![Page 21: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/21.jpg)
Michael Tse: Switch Mode Power Supplies 21
Some core reset possibilities1:n
Vz
1:n
1:n
1:n
nt
Tertiary winding as voltage clamp
n controls clamped voltage for re-sett
Advantage:
Two-wheeler forward converter
Duty cycle restricted below 0.5
Advantage: simple transformerDisadvantage:
Disadvantage: bulky transformer
![Page 22: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/22.jpg)
Michael Tse: Switch Mode Power Supplies 22
Recapitulation
Although we cannot make an ideal transformer, wesolve the problem with a reset circuit.
We now care much less how large Lm is, since wehave a way to get around it.
QUESTION: Can the magnetizing inductance be usedto advantage?
YES, in a flyback converter!
![Page 23: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/23.jpg)
Michael Tse: Switch Mode Power Supplies 23
Flyback converterIn this case, we don’t needan ideal transformer. That’sgood. We don’t have itanyway.The magnetizing inductancebecomes crucial as part ofthe circuit element.Requirement:
Linear inductor!Air-gap to augment BHcurve (then more turns toobtain inductance)
1:n
0A0A
1:n
During ON-time, magnetizing inductance charges up.
+
–
reverse polarity, current can't go!
ideal t/f primary current = 0
During OFF-time, magnetizing current forces its way outthrough the ideal t/f primary.
+
–
di/dt negative,hence reversepolarity
+
–
+
–
![Page 24: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/24.jpg)
Michael Tse: Switch Mode Power Supplies 24
Second problem: real switchingConsider turning theswitch in a buckconverter.The result of this realdevice switching is
POWER LOSS(switching loss)
+
–E
+
–U
0
5
idsvds+ –
turn-off
ids
vds
diode won't conduct unless forward biased
ON OFF
diode turns on
ids can't go downunless diode turns on
i.e., vds reaches the input voltage
![Page 25: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/25.jpg)
Michael Tse: Switch Mode Power Supplies 25
Deriving solution: snubberGive the switch current achance to go down before thediode turns on.
⇓Set up a PARALLEL CURRENTPATH right after the turn-offinstant.
⇓Place a capacitor across theswitch at turn-off to supplycurrent for the output inductor.
+
–E
+
–U
0
5
ids
turn-off
idsvds
ON OFF
ids goes down immediately
![Page 26: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/26.jpg)
Michael Tse: Switch Mode Power Supplies 26
Completing the solutionWhat happens when the switch is turned on again in the next cycle?The current will rush through the switch!!
⇓We must protect the switch from such huge in-rush.The complete snubber is:
Energy loss per cycle
=+
–E
+
during turn-on
during turn-off
Snubber
1
22C vssnubber
![Page 27: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/27.jpg)
Michael Tse: Switch Mode Power Supplies 27
Other examples (same principle)
+
–E
![Page 28: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/28.jpg)
Michael Tse: Switch Mode Power Supplies 28
Third problem: closed-loop controlWhy?Because the system is dynamic.What is a dynamical system?A simplified definition: a system that does not assume an operating point instantlywhen an input parameter is changed.
0.2
0.4
4.8V
9.6Voutput voltage
duty cycle
Consider a buck converter with input 24V.
Suppose d is forced to step up from 0.2 to 0.4.
Suppose d stays constant, but the loadresistance steps up.
4.8Voutput voltage
load resistance
![Page 29: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/29.jpg)
Michael Tse: Switch Mode Power Supplies 29
The need for controlObviously we need to controlthe duty cycle if we want thesystem to have a dynamicbehaviour different from thenatural behaviour.
2 common approachesVoltage mode controlCurrent mode control
+–
voltage-mode fb
current-mode fb
![Page 30: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/30.jpg)
Michael Tse: Switch Mode Power Supplies 30
Voltage mode controlA general feedback circuit representation is:
Z f
Vref
–+
Vout
–+
Vm
vcon R1
R2
vR R
Z R Rv
R
R R
Z
Z R Rvcon
fref
f
fout
1 2
1 2
2
1 2 1 2
||
( || ) ( || )+
= −+ +
![Page 31: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/31.jpg)
Michael Tse: Switch Mode Power Supplies 31
Small-signal analysis
We can separate the AC from theDC component.Let’s not worry about the steady-state operating point.The small-signal AC equation is:
Taking into account the PWM, wehave
vR R
Z R Rv
R
R R
Z
Z R Rvcon
fref
f
fout
1 2
1 2
2
1 2 1 2
||
( || ) ( || )+
= −+ +
∆ ∆vZ
Rvcon
fout= −
1
∆ ∆dV
Z
Rv
m= −
1
1
fout
If we know the duty-cycle-to-output small-signal transferfunction, then we can find theloop gain and hence be able todesign the required compensatorto give sufficient bandwidth andstability.
HERE, we need small-signalmodels from circuit theory.
![Page 32: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/32.jpg)
Michael Tse: Switch Mode Power Supplies 32
Design criteria
Fast response — high gain and wide bandwidth of loop gainStability — phase shift must be well below 180deg at 0dBcrossover.
The converter is a second-order system which can becomeunstable under closed-loop condition, especially when the gain ishigh causing the phase shift of the loop gain to get close to180deg at 0dB crossover.
We must limit the bandwidth somehow if we allow a high DCgain.
![Page 33: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/33.jpg)
Michael Tse: Switch Mode Power Supplies 33
Workbench construction
The concept of POLE — frequency location where the gain beginsto roll off.
E.g., if the circuit has a capacitor to ground forming an RC networkwith the rest of the equivalent resistance, then a pole exists at1/2 CR Hz.
A simple educated trial-and-error:Select an RC combination (in the compensation circuit associated withthe control IC) for a deep lag compensation — narrow band first.Then, relax the time constant (widen the band) until the circuit beginsto oscillate!Finally, reduce the capacitor value down 10 times to restore stability.
![Page 34: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/34.jpg)
Michael Tse: Switch Mode Power Supplies 34
Current mode control
Essential concept — The systemreduces to first order, more orless!The system is therefore faster,with less chance for instability.
IDEA:Make the inductor currentdependent on the output voltageby forcing the current peak tofollow the output voltage analog.Disqualify the inductor current asa state variable.The converter becomes firstorder.
Z f
Vref
–+
Vout
–+
v con
R1
R2
currentsensor
R
SQ
driver
![Page 35: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/35.jpg)
Michael Tse: Switch Mode Power Supplies 35
Fourth problem: isolation
Need for isolating the load fromthe mains.But the control circuit connectsthe two!Put control in the primary-side
Mainsrectifier
driver
control IC
Vout
+V
aux. supply
bootstrapstart-up
Mainsrectifier
driver
control IC
Vout
+V
aux. supply
Put control in the secondary-side
![Page 36: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/36.jpg)
Michael Tse: Switch Mode Power Supplies 36
Fifth problem: filter
An input filter is always needed toprevent differential-mode andcommon-mode noise from getting intothe mains.
L
N
E
~ differential
commoncommon
SMPS
Basic requirement:Let 50Hz gets in, butprevent highfrequencies fromgetting out!
![Page 37: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/37.jpg)
Michael Tse: Switch Mode Power Supplies 37
Basic filter theory
Voltage filter (low-passleft-to-right)
Current filter (low-passright-to-left)
Voltage filter (low-passright-to-left)
noise currentat switchingfrequencyand above
50Hz SMPS load
x
noise voltageat switchingfrequencyand above
x+–
Rs
Rs
Rs
![Page 38: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/38.jpg)
Michael Tse: Switch Mode Power Supplies 38
Conceptual placement
Voltage filter (low-passleft-to-right)
Current filter (low-passright-to-left)
Voltage filter (low-passright-to-left)
SMPS
L
N
E
SMPS
L
N
E
Differential-mode filter
Common-mode filter
![Page 39: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/39.jpg)
Michael Tse: Switch Mode Power Supplies 39
Practical placement
NOTE:
The EMI filter oftenfails to do what itis supposed to do.Does the theoryfall short ofanything?Or have we missedout someimportant things?!
SMPS
L
N
E
common-modeand differential-mode
capacitor
common-mode chokedifferential-mode choke(may be provided by leakageof common-mode choke)
differential-modecapacitor
differential-modecapacitor
LcLd
Cc1 Cc2Cm1
Cc1Cm
2+
Cm2,
1 Cc2Cm
2+ 2
2LdLc+
Ld2
2Cm1
2Cm2
![Page 40: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/40.jpg)
Michael Tse: Switch Mode Power Supplies 40
Conclusion
The curses to the theory:A capacitor may not behave as a capacitor.An inductor may not behave as an inductor.Parasitics and nonlinearity strike in.Signals get around the filter, instead of being filtered.
The theory does not fail. The engineers fail to identify theright ingredients for constructing theories that are viable.
![Page 41: SMPS Lecture 1](https://reader036.vdocument.in/reader036/viewer/2022081800/54f6d0584a795943608b4678/html5/thumbnails/41.jpg)
Michael Tse: Switch Mode Power Supplies 41
There is nothing more practical than a good theory.
— James C. Maxwell