Download - Solid Mechanical Simulation by given assignment with specific parameters Chavdar O. Spasov An Exam University of Chemical Technology and Metallurgy 19/20/2010

Solid Mechanical Simulation by given assignment with specific parameters

Chavdar O. SpasovAn Exam

University of Chemical Technology and Metallurgy

19/20/2010

Outline

Part I : Maine points in the model’s geometry :

- Sketch the model

- Different boundary conditions and materials

- The material specific stress and strain values

- Animation of the processes

Part II : View and explanation about the results from

the simulation :

- Viewing and organization of all final results

- Behaviour of the materials in different situation

about material 2

(different values of the applied force)

Part I.I: Sketching

Beam with dimensions 1200x40x100 mm which is

fixed and loaded as is shown in (firg.1).

Beam material is homogeneous bilinear hardening with yield strength 80 MPa and

Poisson’s ratio ν=0.27 (fig. 2).

Assignment’s parameters :

Part I.I: Sketching

Step One

Creating our sketch using cut tools which are on the left site of the window program

Part I.I: Sketching

Step Two

When we finish our sketch we extrude it to create the final look of the wonted picture

Part I.I: Sketching (Special cases)

Case 1 (TREE IN ONE)

Case 2 (INDIVIDUALY ONE BY ONE)

Part I.2: Boundary condition and materials

Choosing simulation after already done

geometry

Simulation button situate at fight up corner (red button with letter s in the middle)


Making mesh (right click on the mesh

button end choosing Preview Mesh)

Adding more property to material


Click on the Engineering Data

button at the top of the window

For adding property

Add/Remove after that Bilinear

Isotropic Hardening



Choosing different properties as Yield Strength and Tangent Modulus



Bilinear Isotropic Hardening

MATERIAL 1Tangent Modulus2*105 MP

MATERIAL 2Tangent Modulus

1.2*105 MP


0.04*106 MP


0.008*107 MP

Part I.3: Stress and Strain values

Choosing New Analysis for the

simulation (Static Structural)


Choosing the supported and loaded areas using Load and

Supports button

Choose Fixed support and where to be

applied (GEOMETRY – 2 FASES)


Choosing type of load which is Force and his

Magnitude (2000 N) and where it

should be applied

Part I.4: Solution and Simulation

Type of solution important for this case

Stress (von Misses) for Material

2

Strain (von Misses) for Material 3

Deformation process for Material

4

Part I.4: Solution and Simulation

Solved solutions for all tree cases (pushing button Solve)

Material 2 Material 3 Material 4

Part 2.1 : View and Organization

Organization after all types of simulations in one BIG project included all 3 models

Part 2.1 : View and Organization

View result for Material 2



Part 2.1 : Material’s 2 behaviour

Applied force 2000 N



Download - Solid Mechanical Simulation by given assignment with specific parameters Chavdar O. Spasov An Exam University of Chemical Technology and Metallurgy 19/20/2010

Top Related