Sprayed elastomeric polyurethane and polyurea coatings provide outstanding protection and durability to the surface of almostany material
A fast, low cost method for greatly increasing the performance and working life of components usedin demanding environments
Impact Protection Erosion Resistance Wear & Tear Resistance Chemical Resistance UV Resistance Water Resistance No tooling Fast Cure Cycle Excellent Adhesion Thickness 0.5mm to 25mm
Property Test Method Unit Result
Hardness DIN 53505 Shore A 60 - 100
Specific Gravity BS 903Pt A1 g/cm³ 0.9 - 1.1
Ultimate Elongation ISO 527-2 % 200 - 450
Tensile Strength ISO 527-2 MPa 10 - 25
Tear Strength (Angle) DIN 53515 N/mm 50 - 125
Tear Strength(Trouser) DIN 53507 N/mm 20 - 60
Wear Resistance ASTM D 4060 mg 150 - 500
Cold Flex Temperature
BS 2782Meth 150B ºC -40
Vicat SofteningTemperature (A/50) ISO 306 ºC +80
Please be aware that the values listed are generalised and should/can not be applied for specification purposes.
Environmental ResistanceSprayed elastomeric polyureas offer corrosion resistance and
protection from a range of corrosive substances including petrochemicals, acids, bases, water, UV, and ozone.
Range of Properties Available Using Tufshield PU Coating Systems
Permali Gloucester LimitedBristol Road, Gloucester GL1 5TT, U.K.Tel: +44 (0)1452 528282 Fax: +44 (0)1452 507409www.permali.co.uk [email protected]