Download - spring_rollers_for_grc
![Page 1: spring_rollers_for_grc](https://reader034.vdocument.in/reader034/viewer/2022042719/568c356e1a28ab02359438a1/html5/thumbnails/1.jpg)
Spring Rollers
![Page 2: spring_rollers_for_grc](https://reader034.vdocument.in/reader034/viewer/2022042719/568c356e1a28ab02359438a1/html5/thumbnails/2.jpg)
For further information contact: Power-Sprays Limited Avonmouth Way Avonmouth Bristol BS11 9YA
: +44 (0)117 9820067 Fax: +44 (0)117 9820060 [email protected] www.power-sprays.co.uk
MEMBERS OF THE INTERNATIONAL GLASSFIBRE REINFORCED CONCRETE ASSOCIATION
SPRING ROLLERS SR0001/00 Large 'T' Type Spring Compaction Roller Spring section 14cm x 4cm Ø The tried and tested wooden handled compaction roller for sprayed premix GRC.
SR0001/01 Plastic Inserts SR0001/02 Brass Bushing 8mm Hole
Spare Parts
SR0001/04 Set of Insert Bushings
SR0006/00 Large ‘NT’ Type Spring Compaction Roller Spring section 14cm x 4cm Ø Our new lower cost version of the traditional Large ‘T’ Spring Section. It has a plastic handle for better grip and which won’t distort in water.
SR0001/01 Plastic Inserts SR0001/02 Brass Bushing 8mm Hole SR0001/04 Set of Insert Bushings SR0006/01 Spacers Long 30mm SR0006/02 Spacers Short 12mm SR0006/04 Spring 140mm SR0006/05 Handle 140mm
Spare Parts
SR0006/03 Star Lock Cap 8mm SR0003/00 Small 'T' Type Spring Compaction Roller Spring section 9.5cm x 2.5cm Ø Use this for complicated moulds, edges and corners. No spare parts available for this model.
SR0004/00 Extra Long 'T' Type Spring Compaction Roller Spring section 17cm x 4cm Ø Longer spring section for rapid coverage of large surface areas.
SR0001/01 Plastic Inserts SR0001/02 Brass Bushing 8mm Hole SR0001/04 Set of Insert Bushings SR0006/01 Spacers Long 30mm SR0006/02 Spacers Short 12mm SR0006/03 Star Lock Cap 8mm SR0004/01 Spring 170mm
Spare Parts
SR0004/02 Handle 170mm