COLLECTSPART I.D. SIZE
NUMBER IN.
704030 5/64704035 3/32704040 1/8704045 5/32704050 3/16704055 7/32704060 1/4
704040 3.00MM704060 6.00MM
STARLITE “SPIN-TRUE” AIR SPINDLE
26
Model 502030 for FixedApplications thatRequireAbsolute Concentricityat 25,000 rpmNew concept in high speed air-driventooling makes possible dead-true ex-ternal or internal grinding and cuttingapplications.
See Page 24 for Diamond and CBNWheels. Ask for Catalog #C00400 forCarbide I.D. Burs.
Versatile! Collect and Wheel Adapters are InterchangeableThis powerful 2/3 H.P. Air Spindle was designed with versatilityin mind. The Air Spindle can operate as an I.D. or O.D. grinderwith a simple change of the end adaptor. The collet adaptorallows for I.D. grinding applications with collet sizes available:3/32" - 1/8" - 3/16" and 1/4". The wheel adaptor is designed tooperate the 3" O.D. Diamond and CBN wheel shown on page00 of this catalog.
Air-Motor develops 1/3 HP at 30,000 RPM.
Use on Milling or Filing Machine, Lathe,or Jig-Borer! Unusually High Torque!Convert your milling machine to a jig grinder with thisnew Starlite Hole Grinder. Higher efficiency and bet-ter product finish on carbide, hard steels and alloys.Hole Grinder has a powerful precision-built rotaryvane type air motor that yields high speed (30,000RPM) without sacrificing power or torque which isunusually high. Speed is adjustable throughout built-in metering valve. Maximum spindle run-out of.0005". Starlite Hole Grinder available in two modelsshown.
Model 502030 and Accessories502030 Starlite “True-Spin” Air Spindle.
Motor and case only708005 Collet adapter708015 Wheel adapter708050 Connection Tubing, 8 ft., with end fittings708030 Filter-Lubricator708035 Same as 708030 but with Regulator and Gauge708055 Spray-Mist attachment for grinding
Collets704030 5/64704035 3/32704040 1/8704045 5/32704050 3/16704055 7/32704060 1/4704040 3.00mm704060 6.00mm
HOLE GRINDER
PART SHANK MAXIMUMNUMBER DIAM. COLLET SIZE
502005 1/2 1/4
502010 5/8 1/4
20902_STARLITE_TEXT 7/6/05 3:38 PM Page 26
