Download - sumner pipe equipment
Catalog 1009
2 THANK YOU
At Sumner, our welding customers are very important people. One of our primary
goals as a manufacturer is to provide our customers with high quality, competitively
priced tools. But welders are not only customers—we learn from the welder in the
field what products are needed to make their jobs easier. These ideas help us to
design and build new and better products. In essence, our customers are part of our
Research and Development Department and without your input, Sumner would be
unable to continually offer great new products.
Another important part of Sumner philosophy is our commitment to safety. All
Sumner employees are dedicated to the safety of the individuals who use our prod-
ucts. We understand that price is always a concern to our users, but we will never
sacrifice quality or safety just to save costs. We know the demands expected of all
Sumner products, and each is built for years of use. It could be said that Sumner
tools are built the way the welder would make them. As a result, Sumner tools are
not only considered the best in the market, but the most reliable tool to get the job
done efficiently and safely.
Thank you for buying Sumner products!
3CONTENTS
CONTENTS
Category Product Page
Carts Cricket . . . . . . . . . . . . . . . . . . .28Cylinder Carts . . . . . . . . . .31-36Grasshopper . . . . . . . . . . . . . .29Mac Rack . . . . . . . . . . . . . . . .29Pipe Mac . . . . . . . . . . . . . . . . .30
Fit-Up Clamps Clamp Champ . . . . . . . . . .16-17Internal Clamps . . . . . . . . . . . .18Ultra Clamp . . . . . . . . . . . . . . .14Ultra Fit . . . . . . . . . . . . . . . . . .15
Fit-Up Tools Adjust-A-Fit . . . . . . . . . . . . . . .19Adjust-A-Flange . . . . . . . . . . . .19Fit Stix . . . . . . . . . . . . . . . . . . .26Flange Pins . . . . . . . . . . . . . . .21Flange Spreaders . . . . . . . .20-21Handi Bench . . . . . . . . . . . . . .27Hold-Down Device . . . . . . . . . . .5Magnetic Fixtures . . . . . . . . . .23Magnetic Holders . . . . . . . . . .25Magnetic Torch Guide . . . . . . .25Mul-T-Square . . . . . . . . . . . . . .22NLV Vise . . . . . . . . . . . . . . . . .26Pocket Level . . . . . . . . . . . . . .24Quad Level . . . . . . . . . . . . . . .24Rotary Ground Clamp . . . . . . .25Standard Square . . . . . . . . . . .24Versa Level . . . . . . . . . . . . . . .24Welding Gage . . . . . . . . . . . . .20
Hoist Fab-Mate . . . . . . . . . . . . . . . . .13
Jack Stands, Large Vee Big V . . . . . . . . . . . . . . . . . .10-12Max Jax . . . . . . . . . . . . . . .10-12
Jack Stands, Small Vee Fat Jack . . . . . . . . . . . . . . . . . . .7 Fold-A-Jack . . . . . . . . . . . . . .4-6Heavy Duty . . . . . . . . . . . . . . .4-6Heavy Duty Plus . . . . . . . . . . .4-6Hi Boy . . . . . . . . . . . . . . . . . . . .7Pro Jack . . . . . . . . . . . . . . . . .4-6
Roller Head Stands Adjust-A-Roll . . . . . . . . . . . . .8-9Pro Roll . . . . . . . . . . . . . . . . .8-9
4 STANDARD JACKS
Pipe JacksSumner leads the pack with a comprehensive line of jack stand products.Presented here are standard jack models. Head options are featuredon the following pages and large vee jacks begin on page 10.
Heavy Duty JackSpecial features:• 2,500 lb (1135 Kg) capacity• Strut tension plate for
superior lateral support• 1" square tube base
construction• Built for heavy use & abuse• Quick-action lock washer• Patented Fall Guard™
✓ 1-1/2" (38 mm) Acme fine adjustment thread
— the largest in the industry
✓ Large, convenient adjustment handle
✓ Set screw for double margin of safety
✓ Set screw can lock jack head to stand — no loose pieces
✓ Jack independently load tested for quality assurance
✓ CE rated
✓ Backed by over thirty-five years of jack stand
manufacturing experience
Standard features on all Sumner Jacks:
Pro Jack®
Special features:• Formed steel legs• 2,000 lb (900 Kg)
capacity• Priced for all budgets• Strut tension plate
for superiorlateral support
• Quick-action lockwasher
• PatentedFall Guard™
Fold-A-Jack®
Special features:• 2,500 lb (1130 Kg) capacity• Folds up for storage ease• 1" square tube base
construction• Quick-action lock washer• Patented Fall Guard™
Patented
New Heavy Duty Jack feature!
Replacement legs for easy repair(p/n 780675-KD)
Heavy DutyJack PlusSpecial features:• 3,500 lb (1580 Kg) capacity• Rib-supported Vee-Head
prevents “pancaking”• Strut tension plate for
superior lateral support• Built for heavy use
& abuse• 1" square tube base
construction• Quick-action
lock washer• Patented
Fall Guard™New carryinghandle!
5STANDARD JACKS
Model
Part Number (non-stainless steel)
Part Number (stainless steel)
Pro Jack capacity
Heavy Duty Jack & Fold-A-Jack capacity
pipe size
application
StandardVee-Head
780518
780498
2,000 lb900 kg
2,500 lb1135 kg
1/8 – 36"3 – 900 mm
generalwelding of
pipe shapes,solids and
rounds
Ball TransferHead
780518 & 780551
780518 & 780274
1,000 lb450 kg
1,000 lb450 kg
3/8 – 12"10 – 300 mm
rotation ofpipe or tubing in
all directions
Steel WheelHead
780514
780517
2,000 lb900 kg
2,000 lb900 kg
1 1/4 – 24"30 – 600 mm
welding of pipe androunds
Rubber Wheel Head
780499
not available
1,200 lb545 kg
1,000 lb450 kg
1 1/2 – 24"40 – 600 mm
non-marringsurface, rollwelding ofpipes and
rounds
Bar StockHead
780519 (Hi)780944 (Low)
not available
2,000 lb900 kg
2,000 lb900 kg
1/8 – 10" (Flat)3 – 250 mm
welding offlats andshapes
Sumner offers a choiceof 5 head stylesfor every application:
Hold-DownDevice
Similar in operation to a chain vise for pipe, theHold-Down Device uses high tensile strength chainto grip material in any Sumner vee-head jack. Idealfor fitting up flanges, fittings or valves, and a mustwhen working with short lengths.
Part No. Description WeightLb. Kg.
781050 ST-448 Hold-Down Device 6.5 2.9781056 Chain Extension Kit (12” pipe increments) 3.5 1.6
BallTransfers
Standard Vee-Head Ball Transfer Setpart number 780551 (non-stainless steel)part number 780274 (stainless steel)Ball Transfer attachments slide over thestandard vee-head. Offset designaccommodates 3/8—12" (10–300 mm)pipe sizes. 1,000 lb (450 Kg) capacity.
6 STANDARD JACKS
Maximum49"
125 cm
Minimum28"
71 cm
Hi Jacks for perfectwork height onshapes or pipe 24" indiameter or smaller
Hi Jacks (Heavy Duty)
Part No. Description Weight
Lb. Kg.
780375 ST-801 w/Vee-Head 23.0 10.4
780376 ST-802 w/Roller Head 26.0 11.8
780377 ST-803 w/Bar Stock Head 21.0 9.5
780378 ST-804 w/Stainless Steel Rollers 26.0 11.8
780379 ST-805 w/Stainless Steel Vee-Head 24.0 10.9
780380 ST-806 w/Ball Transfer Head 30.0 13.6
780381 ST-807 w/Rubber Wheels 25.0 11.3
Lo Jacks (Heavy Duty)
Part No. Description Weight
Lb. Kg.
780385 ST-901 w/Vee-Head 19.0 8.6
780386 ST-902 w/Roller Head 22.0 10.0
780387 ST-903 w/Bar Stock Head 18.0 8.2
780388 ST-904 w/Stainless Steel Rollers 22.0 10.0
780389 ST-905 w/Stainless Steel Vee-Head 20.0 9.1
780390 ST-906 w/Ball Transfer Head 26.0 11.8
780391 ST-907 w/Rubber Wheels 21.0 9.5
Lo Jacks (Fold-a-Jack®)
Part No. Description Weight
Lb. Kg.
781310 ST-981 w/Vee-Head 17.0 7.7
781311 ST-982 w/Roller Head 20.0 9.1
781313 ST-984 w/Stainless Steel Rollers 20.0 9.1
781314 ST-985 w/Stainless Steel Vee-Head 18.0 8.1
781315 ST-986 w/Ball Transfer Head 24.0 10.9
781316 ST-987 w/Rubber Wheels 19.0 8.6
Hi Jacks (Pro Jack®)
Part No. Description Weight
Lb. Kg.
780471 ST-871 w/Vee-Head 22.0 10.0
780472 ST-872 w/Roller Head 25.0 11.3
780473 ST-873 w/Bar Stock Head 17.0 7.7
780474 ST-874 w/Stainless Steel Rollers 25.0 11.3
780475 ST-875 w/Stainless Steel Vee-Head 23.0 10.4
780476 ST-876 w/Ball Transfer Head 28.0 12.7
780477 ST-877 w/Rubber Wheels 24.0 10.9
Heavy Duty Jack Plus
Part No. Description Weight
Lb. Kg.
780326 w/Ribbed Vee-Head 25.0 11.3
Hi Jacks (Fold-A-Jack®)
Part No. Description Weight
Lb. Kg.
781300 ST-881 w/Vee-Head 25.0 11.3
781301 ST-882 w/Roller Head 28.0 12.7
781302 ST-883 w/Bar Stock Head 23.0 10.4
781303 ST-884 w/Stainless Steel Rollers 28.0 12.7
781304 ST-885 w/Stainless Steel Vee-Head 26.0 11.8
781305 ST-886 w/Ball Transfer Head 32.0 14.5
781306 ST-887 w/Rubber Wheels 27.0 12.2
Maximum36"
89 cm
Minimum21"
51 cm
Lo Heavy DutyJacks for largershapes or pipeover 24" indiameter
Specifications:
Lo Heavy Duty JackSpecial features:• 2,500 lb (1135 Kg) capacity• Strut tension plate for
superior lateral support• 1" square tube base
construction• Built for heavy use & abuse• Quick-action lock washer• Patented Fall Guard™
Lo Fold-A-Jack®
Special features:• 2,500 lb (1130 Kg) capacity• Folds up for storage ease• 1" square tube base• Quick-action lock washer• Patented Fall Guard™
7STANDARD JACKS
Part No. Description Weight
783250 Hi Boy Jack Stand 40.0 lb 18.1 Kg
TM
Sumner now offers a tall jackspecifically designed for tight pipeinstallation, such as in mechanicalrooms or tunnels. The Hi Boy is asafe, portable folding stand that iseasy to transport and holds a hefty1,000 pounds (450 Kg) at 72" (183cm). In its lowest position of 39" (99cm), the Hi Boy is ideal for normalfabrication of weld pipe. Legs fold upfor convenient storage in job boxesor truck beds.
39" to 72" (98-180 cm)height range!
Be safe, be sure…try out the versatileHi Boy Jack Stand.
✓ Large vee head
✓ Wide base
✓ Folding base
✓ Ribbed vee
✓ Ideal for large pipe
FaFat t JaJackck
Larger vee toaccommodatelarger pipe
2,500 lb(1135 kg)weightcapacity
Part No. Description Weight
781375 Fat Jack 28.0 lb 12.7 Kg
781380 Fat Jack with Roller Head 31.0 lb 14.1 Kg
Ribbedvee designstrengthensvee frame… no vee head
bending or“pancaking”
Roller headavailable
8 ROLLER HEAD STANDS
✓ Roller adjustment from either side
✓ Fast adjustment for easy pipe positioning
✓ 1/2 to 36" (1.2 – 91 cm), or 2,000 Lb
(900 Kg) pipe capacity
✓ Clean and simple design avoids welder
interference
Hi Adjust-A-Roll (31”)
Lo Adjust-A-Roll (24”)
✓ Wheels trued for true
pipe rotation
✓ Bronze bearing to
eliminate arcing
✓ Brake to lock loads for
lay-out or fit-up
✓ Handle large enough to
work with gloved hand
Pro RollTM
Adjust-A-Rolls®
Table Adjust-A-Roll
29”74 cm
43”109 cm
Adjustable Height
✓ More features
✓ Adjustable height
✓ 1/2 – 36" (1.2 – 91 cm) or 2,000 Lb (900 Kg) capacity
✓ Leveling on either side of stand
✓ Uses Quick Change Housings
New Adjust-A-Roll feature!
Replacement legs for easy repair(p/n 780675-KD)
9ROLLER HEAD STANDS
Quick Change Roller Housingsfor SumnerPro Roll andAdjust-A-Rolls
ROLLER STAND HEAD STYLES
Carbon Steel orStainless Steel
Roller Head2,000 lb (900 Kg) capacity
Rubber WheelRoller Head
1,200 lb (550 Kg) capacity
Ball TransferRoller Head
1,000 lb (450 Kg) capacitycarbon or stainless steel balls
✓ Wheels “trued” for even pipe rotation
✓ Bronze bearings to eliminate arcing
✓ Brake to lock loads for lay-out or fit-up
✓ Handles large enough to grip with a gloved hand
✓ Quick Change design increases roller stand utility
Part No. Description Weight
Lb Kg
780365 ST-601 with steel wheels 34 15.4
780366 ST-602 with ball transfer heads 33 15.1
780367 ST-603 with rubber wheels 33 15.1
780368 ST-604 with stainless steel wheels 33 15.1
780369 ST-605 with bar stock head 40 18.2
780399 Hi Adjust-A-Roll [base only] 24 10.9
Hi Adjust-A-Roll
Part No. Description Weight
Lb Kg
780440 Pro Roll [base only] 36 16.4
780441 Pro Roll with steel wheels 44 20.0
780442 Pro Roll with ball transfer heads 43 19.6
780443 Pro Roll with rubber wheels 43 19.6
780444 Pro Roll with stainless steel wheels 44 20.0
780446 Pro Roll with bar stock head 52 23.6
Pro RollPart No. Description Weight
Lb Kg
780360 ST-501 with steel wheels 20 9.0
780361 ST-502 with ball transfer heads 18 8.2
780362 ST-503 with rubber wheels 19 8.6
780363 ST-504 with stainless steel wheels 20 9.0
780364 ST-505 with bar stock head 26 11.8
780500 Table Adjust-A-Roll [base only] 12 5.5
Table Adjust-A-Roll
Bar Stock Head2,000 lb (900 Kg) capacity
Two position roller for
containment or non-
containment of material
Part No. Description Weight
Lb Kg
783151 Quick Change Housing with steel wheels 8.0 3.6
783152 Quick Change Housing with rubber wheels 7.0 3.2
783153 Quick Change Housing with stainless steel wheels 8.0 3.6
783154 Quick Change Housing with ball transfer head 7.0 3.2
783155 Quick Change Housing with bar stock head 16.0 7.2
783159 Quick Change Housing with stainless steel ball transfer head 7.0 3.2
Sumner's innovative Quick Change Roller Housings increase the utility of its roller standproduct line. Roller housings can be changed in a snap, without tools, to adapt to changingjob needs. Roller wheels available in steel, stainless steel or rubber. Ball transfer heads,with carbon or stainless steel balls, and bar stock heads are also available.
PatentPending
TableAdjust-A-Roll
Part No. Description Weight
Lb Kg
780370 ST-701 with steel wheels 29 13.2
780371 ST-702 with ball transfer heads 31 14.1
780372 ST-703 with rubber wheels 31 14.1
780373 ST-704 with stainless steel wheels 31 14.1
780359 ST-705 with bar stock head 38 17.3
780405 Lo Adjust-A-Roll [base only] 12 5.5
Lo Adjust-A-Roll
Hi Adjust-A-Roll, Lo Adjust-A-Roll, and Pro Roll have a width of 31" (80cm) and a depth of 23" (58.5cm).
LARGE VEE-HEAD JACKS10
The versatile Max Jax is the ideal fabricatorstand. The large 12" vee head and heavy dutyfive-legged design offers the welder a maximummargin of safety on pipe up to 40" (90 cm). Withoptional accessories, such as the heavy dutycasters and Sumner Hold-Down Device, pipeweighing 2500 Lb. (1135 kg.) per Max Jax canbe wheeled with ease from storage rack... towelding bay... and onto the shipping dock. Thismeans the load is lifted only once, resulting in areduction of 50% or more in handling costs. TheMax Jax is great for leveling loads for fit-up, oruse with a pipe rotator.
Optionalstyles ofroller wheels
Maximum 36" (90 cm) pipe
Minimum 4"(10 cm) pipe
Optional pipehold downchain
Optional, large 8" castersQuick
action brake
Stable andsturdy 5-legconstruction
Fine adjustmentwith bearing
Large 12" vee
TM
In the shop or on the job,
moving long lengths of pipe
is a snap with
Max Jax!
Two Large pipe fabricator stands capableof supporting 2500 lb. (1135 kg.) each!
Max Jax Kit #1 (part number 781403)Consisting of the basic Max Jax (partnumber 781460) with caster kit (partnumber 783464) and roller head kit(part number 781406).
Now with safer 5-legconstruction!
Shown with optional Hold-Down Device (part number 781050 )
11LARGE VEE-HEAD JACKS
Basic Max Jax(part number781460)Used as a Jackstand, the basic MaxJax safely handleslarge diameter pipeup to 36" (90 cm).The 1-3/4" vee-headshaft permits thewelder to positionloads up to 2,500 lb(1,135 Kg) with ease.Check the Max Jaxaccessories on page12.
Specifications
Max Jax Big Vee
Load Capacity 2,500 lb (1,134 Kg) 2,500 lb (1,134 Kg)
Basic Unit A (height) 27.0" (686 mm) 35.5" (902 mm)
B (width) 29.6" (752 mm) 29.5" (749 mm)
Basic Unit with casters (height) 36.5" (927 mm) not applicable
(width) 39.5" (1,003 mm) not applicable
Vee-Head height C (min.) 21.0" (533 mm) 29.5" (749 mm)
(max.) 33.0" (838 mm) 41.0" (1,041 mm)
Vee-Head height with casters (min.) 30.5" (775 mm) not applicable
(max) 42.5" (1,080 mm) not applicable
C
A
C
A
BB
Sumner now offers the Big VeeJack to fabricators of large diameterpipes. With a wider base, 1-3/4"Acme adjustment screw andgreater load capacity, the Big Veeis the ideal stand for thisapplication. It is a 3-leg heavy dutyjack stand built tough for thedemands of larger pipes at anaffordable price!
TM
Maximum 36" (90 cm)pipe with wheels
Minimum 4"(10 cm) pipe
Shown withoptionalroller wheels
Fast actionadjustmenthandle
Wider base
Heavy duty1" squareleg tubing
1-3/4" Acmeadjustmentscrew
Large12" vee
Basic Big Vee(part number 780260)Used as a Jack stand, the basic Big Vee safely handles large diameter pipe up to 36" (90 cm).The 1-3/4" vee-head shaftpermits the welder to position loads up to 2,500 lb (1,135 Kg) with ease.
Now with widerVee-Head!
Newlargelevelingpads!
12 LARGE VEE-HEAD JACKS
Caster Kit (PN 781464)Steel Wheel Caster Kit (PN 781465)
Max Jax onlyFour 8" heavy dutycasters make upthe Max Jax CasterKit. The castershave a quick actionbraking system.
The Roller Head Kit optionprovides four roller wheelswhich can be quickly mountedinto the 12" vee-head. Rollerwheels come in either steel orstainless steel.
Roller Head Kit (PN 781406)Stainless Steel Roller Head Kit (PN 781407)
When working with stainless steelpipe, the sleeve option instantlyconverts the Max Jax to aspecialty tool for stainless steelwelding, preventing carboncontamination
Stainless Steel Sleeves(PN 781382)
Consists of two 1-1/2" ball transferswhich can be mounted in vee-headslots for a range of 3/8—36"(9—915 mm) pipe. 1,000 lb (455 Kg)
Stainless Steel BallTransfers(PN 781397)Standard Ball Transfers(PN 781383)
The Sumner Hold-Down Device useshigh tensile strength chain forgripping up to 12" pipe onto the largevee-head when either welding orusing the Max Jax for materialhandling. Chain extension kits areavailable for pipe up to 40".
Hold-Down Device(PN 781050)
Wide steel wheels provide smootherpipe rotation with less effort.
Large Roller Wheels(PN 781381)
Consists of four rubber wheels andhardware so that it can bemounted into the 12" veehead.1,200 lb (545 Kg) capacity
Rubber Wheel Kit(PN 781394)
Large Vee-Head Jack Accessories
Part No. Description Weight
Lb. Kg.
780260 Big Vee -Basic 36.0 16.4
781460 Max Jax -Basic 68.4 26.4
781403 Max Jax Kit #1 144.0 65.5
781381 Large Roller Wheel Kit 12.0 5.5
781382 Stainless Steel Sleeves 5.0 2.3
781383 Standard Ball Transfer Kit 5.0 2.3
781394 Rubber Wheel Kit 4.0 1.8
781397 Stainless Steel Ball Transfer Kit 5.0 2.3
781406 Roller Head Kit 9.0 4.1
781407 Stainless Steel Roller Head Kit 9.0 4.1
781464 Caster Kit (Max Jax–5 casters) 70.0 31.8
781465 Steel Wheel Caster Kit (Max Jax) 75.0 34.1
781050 Hold-Down Device 6.5 3.0
13HOIST
Position fittings withSumner Adjust-A-Fit
Align flanges withSumner Adjust-A-Flange
Move plate withplate lifting clamp
✓ 1000 lb (450 Kg), 7 foot (2.1 m), liftingcapacity
✓ Moves loads vertically andhorizontally at the same time
✓ Sumner-built single-speed winchoffers infinite positioning for accuratefit-ups
✓ 8" casters (200 mm) and special baseallows load to "get close to the work"
✓ Accessories make Fab-mateextremely versatile
✓ Priced for all budgets
Capable of lifting20' lengths (6.0 m)
of 10" pipe
FAB-MATETM
The hoist forall fab shopneeds!
Part No. Description Height Width Length Weight
inch cm inch cm inch cm Lb Kg
783900 Fab-mate 88.5 224 35 89 44 111 206 93
14 FIT-UP CLAMPS
Part No. Description Weight
Lb Kg
781130 1 – 21/2"Ultra Clamp 3.3 1.5
781150 2 – 6" Ultra Clamp 8.7 4.0
781170 5 – 12" Ultra Clamp 15.1 6.7
✓ All new rugged frame, built for job site use
✓ Smooth new roller clamping action for positive gripping
✓ Stainless steel contacts & alignment screws
✓ Operating handle repositions for close work
✓ Fine adjustment screws for quick fit-up
✓ Light weight for overhead work
Pipe to Fitting Pipe to FlangePipe to Pipe Pipe to Tee
5 –12" Ultra Clamp(127 – 300 mm)
2 – 6" Ultra Clamp(50 – 150 mm)
1 – 21/2"Ultra Clamp(25 – 65 mm)
A fast, accurate fit-up clamp
for pipe to pipe,
pipe to fitting…
and more!
15FIT-UP CLAMPS
A fast, accurate fit-upclamp for fitting to fitting!
Fit-up 90° fitting to teeFit-up two 90° fittings
5 –12" Ultra Fit(127 – 300 mm)
2 – 6" Ultra Fit(50 – 150 mm)
1 – 21/2" Ultra Fit(25 – 65 mm)
✓ Rugged, compact design to operate in tightlocations
✓ Stainless steel contacts & alignment screws
✓ Two-hand operating handle for positivegripping
✓ Fine adjustment screws for quick fit-up
✓ Light weight for overhead work
✓ Smooth roller clamping action for positivegripping
Now you can getthe Ultra Clamp,the Ultra Fit, andthe Internal Fit-up Clamp… all in one great package!
FITKIT
You get…✓ one 2"-6" Ultra Clamp
✓ one 2"-6" Ultra Fit
✓ one 3"-8" Internal Fit-Up Clamp
✓ one set of carbon steel flange pins
✓ one Professional magnetic level
✓ and a sturdy metal tool boxfor storage.
Part No. Description Weight
Lb Kg
781265 1 – 21/2"Ultra Fit 3.0 1.4
781275 2 – 6" Ultra Fit 7.1 3.2
781285 5 – 12" Ultra Fit 12.0 5.5
Part No. Description Weight
Lb Kg
780324 Fit Kit 35.0 16.0
16 FIT-UP CLAMPS
FIT-UP CAPACITYPipe to Pipe
Pipe to FittingPipe to FlangeFitting to Fitting
Plus… Reforming up toschedule 40 pipe!
WIDE RANGE1-10" (25-254 mm)1-16" (25-406 mm)
10-36" (254-914 mm)Carbon or Stainless
Plus… Conversion Kitsto 48" (1200 mm) pipe!
LOW COSTHalf the cost of comparable
cage clamps
LIGHTWEIGHT CONSTRUCTIONEngineered for strength
without the weight
CLAMP CHAMP… an advanced solution for today’s problem fit ups!The Clamp Champ is built for the welder who takes pride in doing his job right… the first time. Constructed foryears of trouble free job site use, the versatile Clamp Champ makes pipe fit-up simple and accurate – withoutthe need of a helper. The Clamp Champ is similar to a pipe vise with fast, easy set up and solid chain engagement.
Each model offers:
Knurled adjustmentfor gloved handsand precise leveling
Leveling and supportingdevice quickly andaccurately sets gap
Drop forged handle and wingnuts designed for rough fielduse and easy adjustment withgloved hands
Fast actionchain locksystem forfast set-up
Flared jack bars areeasy to add or remove toaccommodate a widerange of pipe diameters
Jack bar screw allowswelder to square andspace the fit up easily
All parts platedto resist rust
High tensilestrength chainwith black oxidefinish
Pipe alignmentand clampingtool
17FIT-UP CLAPS
Range Model Part No. Description Number of Weight
Jack Bars Lb Kg
1-10" (25-250 mm) Standard 781000 ST-110 Standard Clamp Champ 3 22 10.0
1-10" (25-250 mm) Stainless Steel 780999 ST-210 Stainless Steel Clamp Champ 3 22 10.0
1-16" (25-400 mm) Standard 780998 ST-116 Standard Clamp Champ 5 27 12.3
1-16" (25-400 mm) Stainless Steel 780997 ST-216 Stainless Steel Clamp Champ 5 27 12.3
10-36" (250-900 mm) Standard 781250 Standard Clamp Champ 7 109 49.4
10-36" (250-900 mm) Stainless Steel 781251 Stainless Steel Clamp Champ 7 109 49.4
CLAMP CHAMP VARIETY:Each Clamp Champ is capable of a wide range offit-ups… without additional accessories!
Pipe to 90° fitting Pipe to flange
Pipe to pipe Pipe to tee
Standard Kit:Consists of metal carrying box, main block and chain, jack bars and instruction manual. Large Clamp Champincludes double jack screws for reforming 20 mm pipe wall.
Capacity Increase Model Part No. Number of Chain Weight
from to Jack Bars Length Lb Kg
10" (250) 16" (400 mm) Standard 781031 2 18" (457 mm) 7 3.2
10" (250) 16" (400 mm) Stainless Steel 781032 2 18" (457 mm) 7 3.2
36" (900) 48" (1250 mm) Standard 781252 2 30" (763 mm) 16 7.3
36" (900) 48" (1250 mm) Stainless Steel 781253 2 30" (763 mm) 16 7.3
Conversion Kit:Consists of chain and jack bars to increase Clamp Champ capacity
18 FIT-UP CLAMPS
✓ Can be used on all standard weld neck flanges and great with slipon flanges
✓ Contact points stainless steel – a standard feature
✓ One piece construction– no loose pieces
✓ Quick action operation
✓ Priced right
NOTE: The Internal Fit-up Clamp is an alignment tool. Aseparate lifting device to support the flange weight isrecommended.
Two independently operated internal clampsalign f lange to pipe, even if internaldimensions differ.
1.Tighten jaws to clamp pipe I.D.
2.Mount flange on second set of pipe jaws,adjust for gap and tighten jaws for finalfit-up.
-the Ideal Fit-up Tool!
Part No. Description Weight
784101 3 – 8" (80 – 220 mm) Internal Fit-up Clamp 5.8 lb 2.6Kg
Part No. Description Weight
784100 2 – 4" (50 – 145 mm) Internal Fit-up Clamp 2.5 lb 1.1Kg
Simple operation
19FIT-UP CLAMPS
Part No. Description Weight
780420 ST-104 Adjust-A-Fit 11 lb 5.0 Kg
Adjust-A-Fit✓ Makes lining up fittings a
trouble-free, one manoperation
✓ Uses gravity to bring fittings for
loads up to 45°
✓ Fastens directly onto fittings for
loads up to 1,000 lb (450 Kg)
✓ Threaded shaft assembly is
hardened for long tool life
✓ Cloverleaf setscrew and
threaded shaft handle work
from either side
Part No. Description Weight
780425 ST-105 Adjust-A-Flange 11 Lb 5.0 Kg
Adjust-A-Flange✓ Fits all flanges for 5" pipe and larger with
bolt holes 3/4 to 1-5/8" (19 to 42 mm)
✓ Used in combination with the Adjust-A-Fit
to bring pipe flanges to exact plumb for
tack and weld out
✓ Eliminates 75% of the hard work in pipe
fitting when used with the Adjust-A-Fit
and Roust-A-Bout
✓ Handles loads up to 1,000 lb (450 Kg)
✓ Flange nuts serve as convenient
reference points to check level
®
®
20 FIT UP TOOLS
Part No. Description Spread Pin Diameter 150 lb 300 lb 400 lb 600 lb 900 lb 1,500 lb
784003 ST-301 Flange Spreader 3" (76 mm) 5/8" (16 mm) 1 - 6" 0.75 - 4" 0.5 - 2" — — —
784002 ST-302 Flange Spreader 4" (101 mm) 3/4" (19 mm) 2 - 12" 1.5 - 8" 1 - 4" 1 - 4" 1 - 2" 1 - 2"
784001 ST-303 Flange Spreader 5" (127 mm) 7/8" (22 mm) 5 - 24" 2.5 - 12" 1.5 - 8" 2 - 6" 1 - 4" 1 - 3"
784000 ST-304 Flange Spreader 6-3/8" (162 mm) 1" (25 mm) 10 - 24" 7 - 24" 3.5 - 16" 4 - 10" 1 - 8" 1 - 5"
ST-301
ST-302
TM
(Manual)
✓ 4 models to cover flange range from1" (25 mm) to 24" (600 mm)
✓ Can be used for 150 lb. to 1,500 lb. flanges
✓ Hardened wedge for safe splitting
✓ Large feed screw
✓ Drive can be rotated by 1-3/8" wrench or 1/2" (12 mm) bar
✓ Compact design – strong enough for tough jobs
PatentsPending
ST-303
ST-304
✓ Available in both
imperial and
metric
Part No. Description Weight
781900 Welding Gage—Imperial 0.25 lb 0.11 Kg
781901 Welding Gage—Metric 0.25 lb 0.11 Kg
✓ Measure internalhi-lo misalignmentand root weldspacing
Accurate quickcheck of internalhi-lo
Root weldspacing withlittle effort
Welding GageNew!New!
FIT-UP TOOLS
ST-310
TM
(Hydraulic)
✓ 10 ton flange splitter to tackle the tough jobs
✓ Spreader arms adjust from 2-3/4 to 8-1/2" (70 mm to 215 mm)
✓ Spring return, single action cylinder
✓ Hardened wedge
✓ Simple operation
✓ Hand pump and 6'(1.5 m) hoseavailable as accessories
Accessories:Part No. 777010Hand hydraulic pump forFlange Spreader with 6'(1.5 m) hose and quickdisconnect
PatentPending
✓ Quick installing pins work as convenient reference points tolevel flange for tack and weld-out —no tools needed
✓ Hardened tapered ST-106 and ST-206 pins automatically centeron 5/8" to 1-5/8" (16 to 42 mm) holes, ST-258 pins similarly setin 1-1/2 to 2-5/8" (38 to 66 mm) holes
✓ Features acme threads for maximum clamping power andhardened steel for long lasting use
Part No. Description Weight
780430 ST-106 Flange Pins 4 Lb 1.8 Kg
780429 ST-206 Stainless Steel Flange Pins 4 Lb 1.8 Kg
780650 ST-258 Flange Pins 32 Lb 14.5 Kg
Part No. Description Capacity Cylinder Cylinder Flange 150 lb 300 lb 400 lb 600 lb 900 lb 1,500 lb
Capacity Stroke Pin Size
784004 ST-310 Flange Spreader 9 x 92 mm 10 ton 2" 1.25–1.63" 22 –42" 16–28" 14–24" 12–20 8 –16" 4–8"
54 mm 32 –42 mm
FlangePinsFor accurate alignmentof pipe flanges (carbonor stainless steel)
ST-258 ST-106/ST-206
21
22 FIT-UP TOOLS
Makes problem fit-up easy andsimple set-ups a snap!
®
✓ Lightweight, but durable
✓ Handles up to 8" flanges and
up to 14" fittings
✓ Versatile for measuring 45°
and 90° angles
✓ Blades marked with
both imperial
and metric
units
The Mul-T-Square consists of two 45° blades which slideeffortlessly in an industrial-strength plastic handle. Each blade is
made of stainless steel for precise alignment. The 10" (26 cm)and 14" (36 cm) arms allow for measurement of tight fit-ups or they
can be expanded for up to 30" squaring of 90° fittings. In someinstances, the 45° blades are handy by themselves for simple alignment.
The blades are loosened or secured by a simple twist of the convenientlylocated locking knob.
Now get the Mul-T-Square with extended reach! Blades with 10" (26 cm) and 20"(52 cm) arms provide even greater range. Extended blades fit into the standardMul-T-Square. Available as blades only or as a complete Mul-T-Square assembly.
Part No. Description Weight
Lb Kg
790000 Mul-T-Square complete (standard blades) 2.3 .9
790001 Mul-T-Square handle only .3 .1
790021 Mul-T-Square blades only (pair, standard) 2.0 .8
790026 Mul-T-Square blades only (pair, extended) 2.5 1.1
790030 Mul-T-Square complete (extended blades) 2.8 1.3
Longer stainlesssteel blades nowavailable!
23FIT-UP TOOLS
MultipleMultiplePurposePurposeMagneticMagneticFixturesFixtures
MultiplePurposeMagneticFixtures
position squaretube
hold tubing tosteel plate
fit-upsteelplate
scale makes awide range ofpositions easy
use in combination
Part No. Description Holding Dimensions Angle Weight
Capacity Configuration
781885 Multiple Angle 28.0 lb 3.75" x 0.5" x 2.5" 30°, 45°, 60° 0.6 lb
Fixture (12.5 kg) (96 x 14 x 64 mm) 75°, 90° (0.3 kg)
781886 Small Angle 48.5 lb 4.75" x 0.5" x 3.25" 45°, 90°, 135° 0.6 lb
Fixture (22.0 kg) (120 x 14 x 82 mm) (0.3 kg)
781887 Medium Angle 90.0 lb 6.33" x 0.75" x 4.0" 45°, 90°, 135° 1.54 lb
Fixture (41.0 kg) (160 x 20 x 102 mm) (0.7 kg)
781888 Large Angle 122.0 lb 7.88" x 0.89" x 5.0" 45°, 90°, 135° 2.86 lb
Fixture (55.0 kg) (200 x 22 x 128 mm) (1.3 kg)
781875 Heavy Duty 88.0 lb 8.2" x 8.2" x 1.8" 90° 5.9 lb
90° Fixture (40.0 kg) (207 x 207 x 48 mm) (2.7 kg)
781876 Adjustable 88.0 lb 8.8" x 8.8" x 1.3" adjustable range 6.4 lb
Fixture (40.0 kg) (225 x 225 x 34 mm) from 45° to 270° (2.9 kg)
MultipleAngleFixture
SmallAngleFixture
MediumAngleFixture
LargeAngleFixture
Heavy Duty,Fixed 90°
Fixture
Adjustable-Angle Fixturewith scale and
repositioning locking handle
Fit-up is a snap with Sumner’s line of magnetic welding fixtures…
fit-up roundtubing
For fast, accuratepositioning of flat andround ferrous metal forwelding and assembly!
New!New!
24 FIT-UP TOOLS
Pocket Level (PN 781947)
A twin vial levelconstructed of tough ABSand aluminum frame, thestrong magnetic basemakes this pocket-sizelevel great for many tasks.
Versa Level (PN 781945)
Featuring a tough, anodized body and a magnetic base,the Versa Level comes with four vials(0°, 30°, 45°, 90°). There is also a“v” cut into the base for pipe andcondit work.
Thumb screw
connects to
pipe or bent
conduiteasy read vials
with magnetic base
Quad Level (PN 781946)
This is a tough, anodized aluminum level with amagnetic base and four vials (0°, 30°, 45°, 90°). A “v”cut into the base makes the Quad Level great for pipeand condit work.
8.5 (21.6 cm) length
Standard Squares
Standard Squares from Sumner are markedwith both imperial and metric units.
Steel (PN 781920)Highly visible lettering and rust-resistantfinish
Aluminum (PN 781921) Lightweight, resists rust
Part No. Description Weight
Lb Kg
781920 Standard Square (steel) 1.36 0.62
781921 Standard Square (aluminum) 0.84 0.40
781945 Versa Level 0.27 0.12
781946 Quad Level 0.38 0.17
781947 Pocket Level 0.16 0.07
weighs just 3 oz (84 grams)
earth magnet on
base and side to
hold measuring
tape
level pipe
for fit-up
can
be
used
with a
plumb
bob
New!New!
New!New!
New!New!
New!New!
25FIT -UP TOOLS
use with a standard square to
create a great torch guide
Rotary Ground Clamp (PN 780435)
Puts an end to tangled ground leads
✓ Rotary head turns with the pipe—puts an end
to ground lead twist, tangle and wear
✓ Provides quick, positive ground for roll-out
welding of pipe and fittings—eliminates weld
pinholes caused by poor grounding
✓ Attaches and detaches in seconds
✓ Makes up ground leads three ways—lug,
clamp-on and bare cable
✓ Positive anti-arc bearings take loads up to 400 amps
Magnetic Holders(PN 781895)Sold in packages of three, Sumner Magnetic Holders can be used toposition a standard builder’s square for layout work or to create anideal burning guide. Holds squares up to 1/8" (3 mm) thick.
Magnetic Torch Guide Kit (PN 781896)
Kit includes two Sumner Magnetic Holders anda 24" (61 cm) stainless steel cutting rail for straight torch work.
Part No. Description Weight
Lb Kg
780435 Rotary Ground Clamp 5.00 2.30
781895 Magnetic Holders (3 per pkg.) 1.00 0.45
781896 Magnetic Torch Guide 1.95 0.88
New!New!
New!New!
26 FIT-UP TOOLS
TM
TRI-PODPIPE VISE&BENCH VISE
Bench ChainVisePart Number 783200
✓ 1/8 to 2-1/2" (3-60 mm) pipe capacity
✓ 1/2" pipe bending shoes
✓ Cast iron frame
✓ Hardened alloy steel jaws
NLV Tri-podPipe VisePart Number 783207
✓ 1/8 to 2-1/2" (3-60 mm)pipe capacity
✓ 1/2" pipe bending shoes
✓ 1" heavy wall tubing for greater stability
✓ Large rubber skid pads bolted to leg
✓ Convenient carrying handle
✓ Light weight
✓ Great price
The PerfectFit-Up Toolfor SteelPlate!
Fit Stix #3 Maximum Range: 1/8" (3 mm)Gap Setting: 1/16" (1.5 mm)
Fit Stix #8 Maximum Range: 5/16" (8 mm)Gap Setting: 5/64" (2 mm)
Fit Stix #12 Maximum Range: 1/2" (12 mm)Gap Setting: 3/16" (5 mm)
✓ Rugged, lightweight design.
✓ Fast, accurate alignments.
✓ Drop forged heads.
✓ Head can be used for setting gap
Align steel platequickly and easilywith Fit Stix!
Patented
Part No. Description Weight
Lb Kg
783207 NLV Tri-pod with Chain Vise 29.0 13.8
783200 Bench Chain Vise 7.5 3.4
Part No. Description Weight
Lb Kg
781850 Fit Stix # 3 1.00 0.50
781860 Fit Stix #8 1.43 0.65
781870 Fit Stix #12 1.87 0.85
27FIT-UP TOOLS
The optional 8" wheelkit for the Handi-Benchallows for rollingtransport of table infoldedposition only.
Built-in torch holder
Use occasionally or as apermanent work bench
✓ Tough #9 expanded metal top
✓ 600 lb (270 Kg) load capacity
✓ 1" square tube frame
✓ One piece construction
✓ 24 X 40" (60 X 100 cm)
work surface
✓ Table top plated for
ground clamp
Plunger pin locks legs in open orfolded position.
Part No. Description Work Dimension Load WeightHeight Depth Length Capacity Lb Kg
783980 HB-604 Welding Table 36.3" (92.2 cm) 24.4" (62 cm) 40.4" (102.6 cm) 600 lb (270 Kg) 54.0 24.5
783965 8" Wheel Kit for Series 600 Handi-Bench 5.0 2.3
a portablewelding table
Four point leg contact.
Compactstorage
use ratchet to secureCricket to pipe
1 use handle to flipCricket & pipe
2 reposition handle 3
More than a Pipe Buggy!✓ Transport 20 ft (6.1 m) pipe lengths up to 1,000 Lb. (450 Kg)
✓ Comes with ratchet hold-down strap and 16" tubed or flat free tires.
✓ Weighs only 70 Lb (31.8 Kg)… can be shipped U.P.S.
✓ Quick handle disconnect for compact storage.
✓ Carries up to 12" diameter pipe.
✓ Ideal job-site material carrier.
TM
Now availablewith flat freetires!
Usesleverage to
lift pipe!
28 CARTS
Patented
Part No. Description Height Width Width between Wheels Length Weight
inch cm inch cm inch cm inch cm Lb Kg
782699 Cricket 21 53 28 71 16 41 28 71 70 33
782685 Cricket with 21 53 28 71 16 41 28 71 70 33flat free tires
Great forflanges,fittingsand valves
29CARTS
Part No. Description Weight
Lb Kg
783317 Mac Rack complete with two 6" swivel 145 65.9
casters and two 6" straight casters
A Mobile Conduit& Pipe Storage Rack!
Support masts nest into baseby pulling plunger pins. Mastsfold up in seconds – no loosehardware or tools required.
Base design is compact and allowsusers to stack Mac Rack and PipeMac (see page 30) carts.
A great transporter of pipe, strut,hanging rod, conduit, etc.
✓ Double wall square tubing
✓ Eight bins of storage
✓ Arms fold easily with plunger pins
✓ 6" Heavy duty casters standard
with each Mac Rack
✓ Powder coat finish
✓ Priced for all budgets
SPECIFICATIONS With Casters Without Casters
inch cm inch cm
Height Stowed 17.75 45.0 10.5 26.6
Height Operating 61.5 155.6 53.75 136.5
Length 58.5 148.6 58.5 148.6
Width 33.0 83.8 33.0 83.8
Ground clearance 7.5 19.1 — —
Weight 145 lb 65.9 kg 117 lb 53.2 kg
GrasshopperTexas Pipe Dolly Enables
one manto lift
2,000 lb (900 Kg)unassisted!
GRASSHOPPER SPECIFICATIONS LOAD CAPACITY
Part No. Description Weight Length Width Height Weight Length Width Height
lb kg ft. cm in. cm in. cm lb kg ft. cm in. cm in. cm
780351 ST-401 Grasshopper 155 70.0 12 366 35 89 40 102 2,000 900 20 610 20 51 28 71
Patent Pending
✓ Special sliding chain block
design accommodates long
and short loads
✓ Carries up to 20" diameter pipe,
tool boxes, fittings and valves
Now shipped on a convenient pallet requiring only 15 minutes for assembly.
30 CARTS
A Mobile Pipe Cart
Vee Attachment included!
✓ Transports 2,000 lb (900 Kg) of pipe, individually or up to a
height of 34" (86 cm)
✓ Six 6" Heavy duty casters
✓ Center-positioned casters makes rolling
the Pipe Mac easy and enables
quick cart rotation for tight turns
✓ Posts pull out for compact storage
✓ Stacks when not in use
Compact storage
Pipe Mac comes with vee attachment.Shown transporting 20" pipe
Part No. Description Weight
Lb Kg
783230 Pipe Mac 150.0 68.2
SPECIFICATIONS inch cm
Height (stowed) 19.5 49.5
Height (operating) 44.0 111.7
Length 58.5 148.6
Width 33.0 83.8
Ground clearance 7.5 19.1
Post Height 34.0 86.4
Pipe Mac stackswith other PipeMacs or withMac Racks (see page 29).
Simple but rugged attachmentprevents pipe from rolling whilethe Pipe Mac is in motion.
Easily slips over the four postholders —no tools required!
New!New!
31CYLINDER CARTS
WELDINGCYLINDER CARTSSumner offers a full range of cylinder carts,shown on pages 31–34. See page 35 forspecifications, wheel information is on page 36.
cart part number 782375108-8S Safety ChainWheels Shown: 779024*
Heavy Duty,SingleCylinder Cart
(Model #112)Popular cylindertruck can be usedfor gas cylinders upto 12" (30 cm) indiameter or forhauling boxes on the 7 x 14" (17.8 x 35.6 cm)base plate. Loadcapacity rated at500 lb (225 Kg).cart part number 782385
112-10S Safety ChainWheels Shown: 779011*
cart part number 782386112-10P Safety ChainWheels Shown: 779027*
Small SingleCylinder Cart(Model #108)
Designed totransport smallcylinders up to 8-1/4" (21 cm)diameter. Perfect formoving acetylene“B” tanks or fireextinguishersaround job sites.Comes with 8"rubber wheels andsafety chain.
* See page 36 for wheel information.
Small-MediumRange, HighRail CylinderCarts (Models #207
& #208)The small-mediumrange cylinder cartsfeature a balanceddesign for comfortablehandling on smooth,level surfaces. Cartscome with trays andhose hooks. Handlegrips offer bettercontrol and stability.
cart part number 782360207-8S Safety ChainWheels Shown: 779029*
cart part number 782359207-10S Safety ChainWheels Shown: 779011*
cart part number 782379208-8S Safety ChainWheels Shown: 779029*
cart part number 782380208-10S Safety ChainWheels Shown: 779011*
base plate: 7.5 x 15.5" (19.0 x 39.4 cm) base plate: 8.0 x 17.0" (20.3 x 43.2 cm)
New!New! New!New! New!New! New!New!
32 CYLINDER CARTS
Medium Range, High Rail Cylinder Cart (Model #209)Ideal for handling two tanks (a 244–330 cu ft oxygen and a 145 cu ft acetylene 9-1/4" diameter tank). High rail designcontains cylinders while moving about job sites.This cart comes with 9 x 18" (22.9 x 45.7 cm) base plate and a large,open tool tray as standard equipment. Options include safety chain or steel containment bar and a range of wheels.
cart part number 782420209-10S Safety ChainWheels Shown: 779011*
cart part number 782422209-10P Safety ChainWheels Shown: 779027*
cart part number 782424209-14S Safety ChainWheels Shown: 779028*
cart part number 782426209-16P Safety ChainWheels Shown: 779107*
cart part number 782421209-10SB SteelContainment BarWheels Shown: 779011*
cart part number 782423209-10PB SteelContainment BarWheels Shown: 779027*
cart part number 782441209-14SB-L LiftingEye**, Divider Wall &Double ContainmentBarsWheels Shown: 779028*
cart part number 782443209-16PB-LF LiftingEye**, Firewall*** &Double ContainmentBarsWheels Shown: 779107*
cart part number 782444209-16FB-LF LiftingEye**, Firewall***,Double ContainmentBars & Flat Free TiresWheels Shown: 779104*
cart part number 782425209-14SB SteelContainment BarWheels Shown: 779028*
cart part number 782427209-16PB SteelContainment BarWheels Shown: 779107*
New!New!
cart part number 782428209-16F SafetyChain, & Flat FreeTiresWheels Shown: 779104*
New!New!
33CYLINDER CARTS
Full Range, High Rail Cylinder Cart (Model #213)The high rail feature secures tanks on to the cart while moving around job site situations. Full range cart holds one244–330cu ft (9-1/4") oxygen tank and one 210–420 cu ft (13-1/2") acetylene tank. Equipped with 13 x 25" (33 x 63cm) base plate and a large, open tool tray standard equipment. Options include safety chain or steel containment barand a range of wheels.
cart part number 782480213-14S Safety ChainWheels Shown: 779028*
cart part number 782482213-16P Safety ChainWheels Shown: 779107*
cart part number 782493213-14SB-L LiftingEye**, Divider Wall &Double ContainmentBarsWheels Shown: 779028*
cart part number 782491213-14SB-LF LiftingEye**, Firewall*** &Double ContainmentBarsWheels Shown: 779028*
cart part number 782484213-16F Safety Chain& Flat Free TiresWheels Shown: 779104*
cart part number 782481213-14SB SteelContainment BarWheels Shown: 779028*
cart part number 782483213-16PB SteelContainment BarWheels Shown: 779107*
cart part number 782495213-16PB-LF LiftingEye**, Firewall*** &Double ContainmentBarsWheels Shown: 779107*
cart part number 782496213-16FB-LF LiftingEye**, Firewall***,Double ContainmentBars & Flat Free TiresWheels Shown: 778104*
cart part number 782497213-25PB-LF LiftingEye**, Firewall*** &Double ContainmentBarsWheels Shown: 780521*
Medium and Full RangeCylinder Cart specificationsare on page 35.
* See page 36 for wheelinformation.
** Lifting eye carts complywith ASME B30.20,AWS D14.1 and AISCcodes.
***Fire-rated wall complieswith OSHA 1926.350 &OSHA 1910.253.
New!New!
New!New! New!New!
34 CYLINDER CARTS
For
40 50 to 80cu. ft. and cu. ft.
acetylene oxygen
cylinders, chose
Model #108 or #207 Cylinder Carts (page 31)
For
75 80 to 150cu. ft. and cu. ft.
acetylene oxygen
cylinders, chose
Model #112 or #208 Cylinder Carts (page 31)
For
145 244 to 330cu. ft. and cu. ft.
acetylene oxygen(K,H,T)
cylinders, chose
Model #112 or #209 Cylinder Carts (pages 31 and 32)
For
210 to 420 244 to 330cu. ft. and cu. ft.
acetylene oxygen(K,H,T)
cylinders, chose
Model #213 Cylinder Carts (page 33)
Cylinder-to-CartCross Reference
How to read Sumner Cylinder Cart product descriptions
X X X - X X X X - X X F = Firewall (blank = no firewall) L = Lifting eye (blank = no lifting eye) B = Belly bar (blank = chains) Wheel type: P = Pneumatic, S + Semi-pneumatic, F = Flat free Wheel diameter in inches Maximum allowable cylinder diameter (in inches) that the cart will carry Maximum number of cylinders the cart will carry
Use this guide to select the Sumner welding cylinder cartthat best matches your needs! (Cylinders not sold.)
EXAMPLE: cart part number 782496, 213-16FB-LF 2 = carries two cylinders13 = 13 inch maximum cylinder diameter16 = 16 inch wheel sizeF = Flat free tireB = Belly barL = Lifting eyeF = Firewall
35CYLINDER CARTS
Part No. Description Dimensions WeightHeight Depth Width Lb Kg
782375 108-8S Cylinder Cart 40.0" (101.6 cm) 12.3" (31.2 cm) 12.1" (30.7 cm) 12.0 5.5
782385 112-10S Cylinder Cart 49.4" (125.5 cm) 18.0" (45.7 cm) 19.1" (48.6 cm) 36.0 16.4
782386 112-10P Cylinder Cart 49.4" (125.5 cm 18.1" (46.0 cm) 20.8" (52,8 cm) 28.0 12.7
Part No. Description Dimensions WeightHeight Depth Width Lb Kg
782420 209-10S Cylinder Cart w/Chain 43.6" (110.7 cm) 16.9" (42.9 cm) 28.0" (71.0 cm) 48.0 21.8
782421 209-10SB Cylinder Cart w/Bar 43.6" (110.7 cm) 16.9" (42.9 cm) 28.0" (71.0 cm) 49.0 23.3
782422 209-10P Cylinder Cart w/Chain 43.6" (110.7 cm) 16.9" (42.9 cm) 29.0" (75.2 cm) 40.0 18.2
782423 209-10PB Cylinder Cart w/Bar 43.6" (110.7 cm) 16.9" (42.9 cm) 29.0" (75.2 cm) 41.0 18.6
782424 209-14S Cylinder Cart w/Chain 43.6" (110.7 cm) 16.9" (42.9 cm) 28.0" (71.0 cm) 47.0 21.4
782425 209-14SB Cylinder Cart w/Bar 43.6" (110.7 cm) 16.9" (42.9 cm) 28.0" (71.0 cm) 48.0 21.8
782426 209-16P Cylinder Cart w/Chain 43.6" (110.7 cm) 18.27" (46.4 cm) 32.5" (82.6 cm) 53.0 24.1
782427 209-16PB Cylinder Cart w/Bar 43.6" (110.7 cm) 18.27" (46.4 cm) 32.5" (82.6 cm) 54.0 24.5
782428 209-16F Cylinder Cart w/Chain 43.6" (110.7 cm) 18.27" (46.4 cm) 32.5" (82.6 cm) 53.0 24.1
782480 213-14S Cylinder Cart w/Chain 44.6" (113.3 cm) 20.3" (51.6 cm) 31.8" (80.8 cm) 53.0 24.0
782481 213-14SB Cylinder Cart w/Bar 44.6" (113.3 cm) 20.3" (51.6 cm) 31.8" (80.8 cm) 55.0 25.0
782482 213-16P Cylinder Cart w/Chain 44.6" (113.3 cm) 22.1" (56.1 cm) 36.5" (92.7 cm) 59.0 26.8
782483 213-16PB Cylinder Cart w/Bar 44.6" (113.3 cm) 22.1" (56.1 cm) 36.5" (92.7 cm) 61.0 27.7
782484 213-16F Cylinder Cart w/Chain 44.6" (113.3 cm) 22.1" (56.1 cm) 36.5" (92.7 cm) 59.0 26.8
Double Cylinder Carts (Models #209 & #213)
Part No. Description Dimensions WeightHeight Depth Length Lb Kg
782360 207-8S Cylinder Cart 41.0" (104.1 cm) 21.8" (55.2 cm) 12.8" (32.3 cm) 35.0 15.9
782359 207-10S Cylinder Cart 41.0" (104.1 cm) 22.8" (57.8 cm) 13.8" (34.9 cm) 35.0 15.9
782379 208-8S Cylinder Cart 49.5" (125.7 cm) 22.0" (55.9 cm) 18.3" (46.4 cm) 42.0 19.1
782380 208-10S Cylinder Cart 49.5" (125.7 cm) 23.0" (58.4 cm) 18.3" (46.4 cm) 42.0 19.1
Small Double Cylinder Carts (Models #207 & #208)
Single Cylinder Carts (Models #108 & #112)
Cylinder Cart Specifications
Part No. Description Dimensions WeightHeight Depth Width Lb Kg
782441 209-14SB-L Cylinder Cart w/Divider 66.0" (167.6 cm) 17.0" (43.2 cm) 27.5" (69.9 cm) 69.0 31.3
782443 209-16PB-LF Cylinder Cart w/Firewall 66.0" (167.6 cm) 18.4" (46.7 cm) 32.4" (82.3 cm) 75.5 34.2
782444 209-16FB-LF Cylinder Cart w/Firewall 66.0" (167.6 cm) 18.4" (46.7 cm) 32.4" (82.3 cm) 74.0 33.6
782491 213-14SB-LF Cylinder Cart w/Firewall 66.5" (168.9 cm) 20.5" (52.1 cm) 31.8" (80.8 cm) 100.0 45.5
782493 213-14SB-L Cylinder Cart w/Divider 66.5" (168.9 cm) 20.5" (52.1 cm) 31.8" (80.8 cm) 84.0 38.1
782495 213-16PB-LF Cylinder Cart w/Firewall 66.5" (168.9 cm) 22.1" (56.1 cm) 36.8" (93.5 cm) 109.0 49.4
782496 213-16FB-LF Cylinder Cart w/Firewall 66.5" (168.9 cm) 22.1" (56.1 cm) 36.8" (93.5 cm) 108.0 49.1
782497 213-25PB-LF Cylinder Cart w/Firewall 66.5" (168.9 cm) 27.1" (68.8 cm) 36.8" (93.5 cm) 152.0 69.1
Double Cylinder Carts with Lifting Eye and/or Fire Wall(Models #209 & #213)
36 CYLINDER CARTS AND CONTACT INFORMATION
Welding Cylinder Cart Wheel ListSumner cylinder carts come equipped with high quality wheels as specified below the photos on pages 31 through33. The chart below lists wheel specifications and the carts on which they can be used.
Part No. Diameter Width Bore Bearing Description Load Capacity Fits Sumner Cart(s)
779024 8" 1.75" 1/2" Powder metal bushing Semi-pneumatic 80 lb 108, 207, 208
779029 8" 2.00" 1/2" Powder metal bushing Semi-pneumatic 800 lb 207, 208
779011 10" 2.75" 5/8" Bronze bushing Semi-pneumatic 400 lb 112, 209, 207, 208
779027 10" 3.5" 5/8" Bronze bushing Pneumatic 350 lb 112, 209
779028 14" 1.75" 5/8" Bronze bushing Semi-pneumatic 150 lb 209, 213
779104 16" 4.8" 1" Powder metal bushing Flat free 380 lb 209, 213
779107 16" 4.8" 1" Powder metal bushing Pneumatic 380 lb 209, 213
780521 25" 4" 1 1/4" Bronze bushing Pneumatic 800 lb 213
Copyright ©, 2009 Sumner Manufacturing Co., Inc.
7514 Alabonson RoadHouston, Texas 77088
voice: (281) 999-6900fax: (281) 999-6966Sumner Manufacturing Co., Inc.
In Canada: 470 Collier MacMillan Drive, Unit 2 & 3Cambridge, ON N1R 5Y7
voice: (519) 623-2300fax: (519) 623-0744
In the UK: Unit 16ABlackpole Trading Estate EastBlackpole RoadWorcesterWR3 8SG, UK
voice: (44) 01905 458333fax: (44) 01905 458222
www.sumner.com
Cylinder Cart Specifications