Download - Surftest SJ-400
Form Measurement
Aurora, Illinois(Corporate Headquarters)(630) 978-5385Westford, Massachusetts(978) 692-8765Huntersville, North Carolina(704) 875-8332Mason, Ohio(513) 754-0709Plymouth, Michigan(734) 459-2810City of Industry, California(626) 961-9661Kirkland, Washington(408) 396-4428
Surftest SJ-400
Portable Surface Roughness Tester
Bulletin No. 2013
2 3
Requirement
1
Requirement
2
Requirement
3
Requirement
4
Revolutionary New Portable Surface Roughness Testers Make Their DebutLong-awaited performance and functionality are here: compact design, skidless and high-accuracy roughness measurements, multi-functionality and ease of operation.
SJ-401
SJ-402
SJ-401
Measurement/evaluation of stepped features and straightnessUltra-fine steps, straightness and waviness are easily measured by switching to skidless measurement mode. The ruler function enables simpler surface feature evaluation on the LCD monitor.
Roughness parameters that conform to international standardsThe SJ-400 Series can evaluate 36 kinds of roughness parameters conforming to the latest ISO, DIN, and ANSI standards, as well as to JIS standards (1994/1982).
Cylinder surface roughness measurements with a hand-held tester The skidless measurement and R-surface compensation functions make it possible to evaluate cylinder surface roughness.
Surftest SJ-400 Series
High-accuracy measurements with a hand-held testerA wide range, high-resolution detector and an ultra-straight drive unit provide class-leading accuracy. Detector Measuring range: 800µm Resolution: 0.000125µm (on 8µm range) Drive unit Straightness/traverse length SJ-401: 0.3µm/.98"(25mm) SJ-402: 0.5µm/1.96"(50mm)
2 3
Requirement
6
Requirement
5Advanced data processing with extended analysisThe SJ-400 Series allows data processing identical to that in the high-end class. These data analysis and report creation capabilities are achieved using the surface roughness analysis program FORMTRACEPAK V5 or SJ-Tools.
Calculation Result Screen Measured Profile Screen
Fine contour measurement with an auto-leveling table
Deep groove measurement
Upside down measurement
Cylinder measurement with a support foot
Measurement Applications
R-surface measurement
Confirmation of measurement results and assessed profiles without a printoutThe large, integrated, touch-panel LCD monitor clearly displays evaluation results and measured profiles.
4 5
Skid
TraversedirectionTraverse
direction
Traversedirection
Traversedirection
Ruler Analysis Screen
Tilt compensation function• The Tilt Compensation Datum Points are selectable from
all of the profile (choose P1 and P2) or any arbitrary two sections on the profile (choose P1, P2, P3 and P4), as required. If you choose adjacent sections for tilt compensation then the characteristics of features of interest between these sections, such as scratch depth, etc, can be measured directly.
Simplified surface feature evaluation with the ruler function
• This function determines the coordinate difference between two arbitrary points so feature characteristics, such as step height and width, etc, can be measured.
The SJ-400 Series detector uses interchangeable nosepieces that allow skid or skidless measurements to suit the type of measurement required.
Ruler function key
Ruler key
Coordinate difference
Ruler
The SJ-400 Series Performs Skidless Measurements
Skidless measurement Skidded measurement
4 5
DAT screen guides the user when leveling
Height/tilt adjustment unit
Height adjustment
Tilt adjustment
DAT Function for the optional leveling table
DAT screen guides the user when leveling
With DAT
With DAT
Preliminarymeasurement
DAT screen(adjustment
amount)
OK
NG
Final measurement
Preliminarymeasurement
Intuitive adjustment using the tilt adjustment knob
WithoutDAT
WithoutDAT
Repeat
The DAT Function
Adjust the micrometer head by -0.928mm to level
Turn tilt adjustment knob by 1.37 turns counter-clockwise to level
With the SJ-400 mounted on a stand, the DAT function also works with the optional leveling table.
Powerful Support for LevelingThe height/tilt adjustment unit comes as standard for leveling the drive unit prior to making skidless measurements and, supported by guidance from the unique DAT function, makes it easy to achieve highly accurate alignment.
6 7
Measuring curved-surface roughness (skidless measurement)
Usually, a spherical or cylindrical surface (R-surface) cannot be evaluated, but, by removing the radius with a filter, R-surface data is processed as if taken from a flat surface.
Built-in thermal printerA high quality, high-speed thermal printer prints out measured results. It can also print a BAC curve or an ADC curve as well as calculated results and assessed profiles. These results and profiles are printed out in landscape format, just as they appear on the LCD, in easy-to-understand form.
Measurement of a cylindrical surface
R-Surfacecompensation
R-Surfacecompensation
StatisticsStatistical processing can be performed on multiple measurements for one roughness parameter. Histograms can be displayed and printed in addition to statistical results (mean, standard deviation, maximum/minimum value and acceptance ratio).
Statistical
Histograms
Switchable
More Measuring Functions Than Expected From a Compact Tester
6 7
Calculation Result Screen with GO / NG judgment result
GO/NG indicationUpper and lower tolerance limits can be set for up to 3 roughness parameters. A GO/NG indication is displayed after a measurement. The calculation result is highlighted if NG.
Calibration Screen
Auto-CalibrationThe SJ-400 Series is equipped with Ra calibration and step calibration methods for detector calibration (gain adjustment). In both calibration methods only the calibrated value of the precision specimen needs to be entered. No other operations are required to calibrate the tester.
Storing/recalling measured data and conditionsThe measurement conditions and data can be stored in the control unit or memory card (optional) and recalled as required. Batch printout of data after on-site measurement improves measuring efficiency.
Key maskingLocks out input from the touch panel keys. This eliminates the possibility of the operator accidentally changing the calibration or measurement conditions.
Real samplingThis function samples stylus displacement for a specified time without engaging detector traverse. This function has a wide range of uses, such as a simplified vibration meter or a displacement gage incorporated in another system.
RecalculatingPreviously measured data can be recalculated for use in other evaluations by changing the current standard, assessed profile and roughness parameters.
CustomizingThe SJ-400 Series can be set up to calculate and display only a subset of the roughness parameters available. Parameters can be added later for recalculation, if required.
Customized Screen
GO sign
NG sign
Invalidated
Storage capacityMeasurement conditions
Control unit: 5 conditionsMemory card: 20 conditions
Measurement data Memory card: 50 or more pieces of dataArbitrary length measurementThis function allows a sampling length to be arbitrarily set in .004" (0.1mm) increments SJ-401: .004" to .98" (0.1mm to 25mm), SJ-402: .004" to 1.96" (0.1mm to 50mm). It also allows the SJ-400 Series to make both narrow and wide range measurements.
8 9
Simplified Communication Program (SJ Tools)
Wide Choice of Evaluation Possibilitieswith Analyzing Program FORMTRACEPAK V5
FORMTRACEPAKSJ-400
SJ-400 Series measurement data can be transferredinto FORMTRACEPAK V5 by using a memory card (Optional) for detailed analysis.
One of the various functions of the Surftest SJ-400 Series is the ability to use RS-232 with a simplified communication program that allows the transfer of measurement data into a calculation software. The program must be used with Microsoft Excel to generate the inspection report and/or certificate.
Required environment:* OS: * Spreadsheet software:Windows 2000-SP4 Microsoft Excel 2000Windows XP Microsoft Excel 2002 Windows Vista Microsoft Excel 2003Windows 7 Microsoft Excel 2007
Requires RS-232C cable (Optional)SJ-400 Series RS-232C cable Order No. 12AAA882
*RS-232C cable D-sub9pin x 2 (store purchase) is a straight cable.*RS-232C acannot be used in a USB connector.
This program can be downloaded for free from the Mitutoyo website.
http://www.mitutoyo.co.jp
See the FORMTRACEPAK brochure (Bulletin No. 2010) for more details.
*Windows OS & Microsoft Excel are products of Microsoft Corporation.
8 9
Carrying case is a standard accessory
SpecificationOrder No. SJ-401 178-947-4A (inch/mm) 178-957-4A (inch/mm)
SJ-402 178-945-4A (inch/mm) 178-959-4A (inch/mm)Measuring method Skidless/Skidded measurementMeasuring range Z-axis 32000µin, 3200µin, 320µin (800µm, 80µm, 8µm) (Up to 2,400µm with an option stylus)
X-axis SJ-401: 1” (25mm) SJ-402: 2” (50mm)Drive method Straightness SJ-401: 12µin/1” (0.3µm/25mm) SJ-402: 20µin/2” (0.5µm/50mm)
Measuring speed .002”, .004”, .02”, .04”/s (0.05, 0.1, 0.5, 1.0mm/s)Return speed .02”, .04”, .08”/s (0.5, 1.0, 2.0 mm/s)
Height-Tilt adjustment unit
Tilt adjustment range ±1.5˚Height adjustment amount .39”(10mm)
Assessed profile Primary profile (P), Roughness profile (R), Filtered waviness profile (W), DIN4776, MOTIF (R, W)Evaluation parameters Ra, Ry, Rz, Rq, Pc, R3z, mr, Rt, Rp, Rv, Sm, S, δc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Lo, Ppi, R,
AR, Rx, ∆a, ∆q, Ku, HSC, mrd, Sk, W, AW, Wte, Wx, VoAnalysis graphs Bearing Area Curve (BAC), Amplitude Distribution Curve (ADC)Number of sampling length X1, X3, X5, XL* (*=arbitrary length)Arbitrary length SJ-401: .01” to 1” (.01” increments) [0.1 to 25mm (0.1mm increments)]
SJ-402: .04” to 2” (.01” increments) [0.1 to 50mm (0.1mm increments)]Sampling length (L) .003”, .01”, .03”, .1”, .3” (0.08, 0.25, 0.8, 2.5, 8mm)Printing width 1.89” (48mm)/paper width: 2.28” (58mm)Recording magnification
Vertical magnification 10 to 100K magnification, Auto
Horizontal magnification 1 to 1K magnification, Auto
Detector Detection method Differential inductance method
Minimum resolution .005µin (320µin range)/0.000125µm (8µm range)
Stylus tip Cone 90°, Radius 5µm, Diamond Cone 60°, Radius 2µm, Diamond
Measuring force 4mN 0.75mN
Radius of skid 1.57”(40mm)
Skid force Less than 400mN
Function Customize Display/Roughness parameter selectable
Data compensation R-surface, Tilt compensation
Ruler function Displays the coordinate difference of any two points
D.A.T. function Helps to adjust leveling during skidless measurement
Displacement detection mode Enables the stylus displacement to be input while the drive unit is stopped
Statistical processing Maximum value, Minimum value, Mean value, Standard deviation (s), Pass ratio, Histogram
Tolerance judgment Upper and lower limit values for three parameters can be specified
Measuring Condition storage Five sets of measuring conditions (control unit)
Printer Thermal printer
Cut-off length .003”, .01”, .03”, .1”, .3” (0.08, 0.25, 0.8, 2.5, 8mm)
Digital filter 2CR, PC75 (phase corrected), Gaussian
Calibration Ra, Step (Automatic calibration entering the value of roughness specimen)
Power supply Via AC adapter, built-in rechargeable battery (Ni-H)
Battery Charging time 15 hours
Number of measurements 600 maximum without printing
Power consumption 43W (max.)
Dimension Control unit 12.09”x6.50”x3.7” (307x165x94mm)
Height-Tilt adjustment unit 5.16”x2.48”x3.90” (131x63x99mm)
Drive unit SJ-401: 5.04”x1.42”x1.85” (128x36x47mm) SJ-402: 6.08”x1.41”x1.84” (155x36x47mm)
Roughness standard JIS (JIS B0601-2001/1994/1982), DIN, ISO, ANSI
LCD size Touch panel
Data output RS-232C input/output, SPC output
External control Connection to data processing system (option)
Mass Control unit 2.64lbs. (1.2kg)
Height-Tilt adjustment unit 1.88lbs. (0.4kg)
Drive unit SJ-401: 1.32lbs. (0.6kg) SJ-402: 1.41lbs. (0.64kg)
Standard accessories AC adapter, Carrying case, Printing paper, Touch pen, Protect sheet, Skidless nosepiece,User’s manual, one-sheet manual, tools
Inch/(Metric)
10 11
Standard stylus
For small hole
2X long for deep hole
For small hole/2X long for deep hole
For extra small hole
For extra minute hole
For small hole
For ultra small hole
For deep hole (2X long and 3X long) For small slotted hole
Styli
Colorcoding
Skid nosepiece12AAB355
Detector
Detector (0.75mN): 178-396-2Detector (4mN): 178-397-2
Detail-A
Detail-A
Detail-A
Detail-A
Ball ø0.5
Ball ø.06”(ø1.6)
Detail-A(S=5/1)
12AAE882 [1µm]*12AAE924 [1µm]**12AAC731 [2µm]*12AAB403 [5µm]**12AAB415 [10µm]**12AAE883 [250µm][ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAC732 [2µm]*12AAB404 [5µm]**12AAB416 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE898 [2µm]*12AAE914 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE892 [2µm]*12AAE908 [5µm]**[ ): Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE938 [2µm]*12AAE940 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAJ662 [.01”(0.25mm)][ ]: Tip radius
12AAE884 [.03”(0.8mm)][ ]: Tip radius
12AAC733 [2µm]*12AAB405 [5µm]**12AAB417 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAC734 [2µm]*12AAB406 [5µm]**12AAB418 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
3X stylus12AAC741 [2µm]*12AAB414 [5µm]**12AAB426 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
2X stylus12AAC740 [2µm]*12AAB413 [5µm]**12AAB425 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
60°/90°
.04”(0.9) 1.48”(37.7)
.30”
(7.6
)
1.76”(44.7)
ø.09
”(ø2
.4)
ø.05”(ø1.2)
.20”
(5.2
) A
1460
ø8
ø14
ø14
ø7
1011.5
3.1
3.6
1.3
4Extension rods(12AAG202: 50mm, 12AAG203: 100mm)
Detail-A(S=5/1)
Detail-A(S=5/1)
Detail-A Detail-A
ø.01”(ø0.3)
60°/90°
.03”
(0.8
) .01”(0.4)
ø.09
”(ø
2.4)
1.48”(37.7)
.10”
(2.5
)
ø.02
”(ø
0.6)
.35”(8.9)
1.74”(44.2)
.03”
(0.8
)
A
ø.09
”(ø
2.4)
3.45”(87.7).04”(0.9)
ø.05”(ø1.2) ø.
09”
(ø2.
4)ø.05”(ø1.2)
60°/90° 60°/90°
3.73”(94.7)
.30”
(7.6
).2
0”(5
.2) .3
0”(7
.6)
.20”
(5.2
)
A
5.42”(137.7).04”(0.9)
5.70”(144.7)
A
.01”(0.4)
.05”
(1.2
)
ø.01”(ø0.3)
60°/90°
ø.09
”(ø
2.4).35”
(8.9)
ø.02
”(ø
0.6)
.10”
(2.5
)
1.48”(37.7)
.05”
(1.2
)
1.74”(44.2)
A
.02”(0.6)
.01”
(0.4
)
.06”
(1.6
) ø.02”(ø0.6)
60°/90°
ø.09
”(ø
2.4)
.59”(15)
ø.05
”(ø
1.2)
.13”
(3.4
)
.09”
(2.4
)
.06”
(1.6
)
.02”(0.6) 1.48”(37.7)
1.75”(44.4)
A
ø.01
”(ø
0.3)
.01”
(0.4
).06”
(1.6
)
ø.05
”(ø
1.2)
ø.09
”(ø
2.4)
3.72”(94.4)
3.45”(87.7).02”(0.6) 1.77”(45)
A
ø.02”(ø0.6)
.02”(0.6)
ø2.4
ø0.3
A
7
37.7
43.8
7
ø.05
”(ø
1.2)
ø.09
”(ø
2.4)
1.61”(41)
3.45”(87.7)
3.69”(93.8)
ø.05
”(ø
1.2)
.06”
(1.6
)
.13”
(3.4
)
.09”
(2.4
)
ø.09
”(ø
2.4)
3.72”(94.4)
3.45”(87.7).02”(0.6)
1.18”(30)
A
.02”(0.6)
ø.02”(ø0.6)
.12”
(3)
.07”
(1.8
)
ø.09
”(ø
2.4)
3.73”(94.7)
3.45”(87.7)
.02”(0.6)
Unit: Inch(mm)
Colorcoding
Colorcoding
Colorcoding
Colorcoding
Colorcoding
1.72"(43.8)
1.48"(37.7)
.33"(8.5)
ø.02"(ø0.5)
.17"
(4.3
)
ø.01
"(ø
0.3)
ø.13
"(ø
3.2)
ø.09
"(ø
2.4)
.12"
(3.1
)
Optional Accessories
10 11
StyliFor deep groove .39”(10mm) For deep groove .78”(20mm)/2X Long for deep hole
For rolling circle waviness/2X Long for deep hole
For deep groove .78”(20mm) For deep groove 1.57”(40mm)
For deep groove 1.18”(30mm) For deep groove 1.18”(30mm)/2X Long for deep hole
For gear tooth For gear tooth/2X Long for deep hole
For rolling circle waviness surface
For knife-edge detector For corner hole/2X Long for deep hole
For eccentric arm For bottom surface
Detail-A
Detail-A
Detail-A
Detail-A
Detail-A
Detail-A
12AAC735 [2µm]*12AAB409 [5µm]**12AAB421 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE893 [2µm]*12AAE909 [5µm]**[ ): Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE895 [2µm]*12AAE911 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE894 [2µm]*12AAE910 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE896 [2µm]*12AAE912 [5µm]**[ ]: Tip radius
12AAE897 [2µm]*12AAE913 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE899 [2µm]*12AAE915 [5µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAE886 [.01”(0.25mm)][ ]: Tip radius
12AAC736 [2µm]*12AAB408 [5µm]**12AAB420 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAC737 [2µm]*12AAB407 [5µm]**12AAB419 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAB339 [2µm]*12AAB410 [5µm]**12AAB422 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAC738 [2µm]*12AAB411 [5µm]**12AAB423 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAC739 [2µm]*12AAB412 [5µm]**12AAB424 [10µm]**[ ]: Tip radius*Tip angle: 60° **Tip angle: 90°
12AAB338 [.03”(0.8mm)][ ]: Tip radius
.51”
(13)
ø.09
”(ø
2.4)
ø.05”(ø1.2)
60°/90°
60°/90°
.56”
(14.
2)
1.76”(44.7)1.48”(37.7)
A
.91”
(23)
.04”(0.9)
ø.09
”(ø
2.4)
.95”
(24.
2)
ø.05”(ø1.2)
1.48”(37.7)
1.76”(44.7)
A
1.30
”(33
)
1.25
”(31
.8)
.20”
(5.2
)
ø.05”(ø1.2)
A
ø.09”(ø2.4) ø.
09”
(ø2.
4)
60°/90°
1.48”(37.7)
1.78”(45.2)
60°/90°
60°
.30”
(7.6
)
.25”
(6.4
)
1.48”(37.7)
1.72”(43.8)
ø.05”(ø1.2)
ø.09
”(ø
2.4)A
A1.48”(37.7)
.03”(0.9)
60°/90°
ø.05”(ø1.2)
1.78”(45.2)
.30”
(7.6
)
.40”(10)
ø.09
”(ø
2.4)
ø.09
”(ø
2.4)
.30”
(7.6
)
ø.09
”(ø
2.4)ø.05”
(ø1.2)
60°/90°
1.48”(37.7).03”(0.9)
1.76”(44.7)
A
.30”
(7.6
)
ø.09
”(ø
2.4)
ø.05”(ø1.2)
.03”(0.9) 1.48”(37.7)
1.76”(44.7)
Ball ø.06” (ø1.588)
.20”(5.2)
.04”(0.9)
.90”
(23)
.86”
(21.
8)
.20”
(5.2
)
3.75”(95.2)
Unit: Inch(mm)
3.45”(87.7)
ø.09”(ø2.4)
n.05”(n1.2)
3.69”(93.8)
3.45”(87.7)1.38”(35)
ø.03”(ø0.8)
45°.23”
(5.8
)
.20”
(5)
ø.06
”(ø
1.6)
ø.09
”(ø
2.4)
3.73”(94.7)
.03”(0.9) 3.45”(87.7)
ø.05”(ø1.2)
ø.09
”(ø
2.4)
.20”
(5.2
)
.25”
(6.4
)
.30”
(7.6
)
1.72
”(43
.8)
1.68
”(42
.6)
.20”
(5.2
)
Ø.0
9”(Ø
2.4)
1.78”(45.2)
1.48”(37.7)
ø.09”(ø2.4)
Ø.05”(Ø1.2)
1.44
”(36
.5)
1.38
”(35
)
.20”
(5.2
) Ø.1
2”(Ø
3)
3.69”(93.8)3.45”(87.7)
ø.05”(ø1.2)
1.44
”(36
.5)
1.38
”(35
)
ø.12
”(ø
3)3.69”(93.8)
.27”
(6.7
7)
3.45”(87.7)
ø.05”(ø1.2)
60°Colorcoding
Colorcoding
Colorcoding
Colorcoding
Colorcoding
Colorcoding
25°
.24”
(6.2
)
.20”
(5)
ø.09
”(ø
2.4)
ø.04”(ø1)60°/90°
1.48”(37.7).02”(0.5)
1.74”(44.3)
12 13
ø.55"(ø14)
.27"
(6.8
).1
4"(3
.6)
.55"(14)2.36"(60)1.07"(27.2)
ø.31
"(ø
8)
ø.55
"( ø
14).94"(24)
.41"
(10.
4)
.11"(2.8)
DetectorSkid nosepiece (12AAB344)Stylus
ø.55"(ø
14)
ø.27"
(ø7)
.39"(10).12"(3.1)
.14"
(3.6
).05"
(1.3
)
Skidless nosepiece(12AAB355)
90
.03"(0.9)
1.48"(37.7)
.30"
(7.6
)
1.76"(44.7)
ø.09
"(ø
2.4) ø.05"
(ø1.2)
.20"
(5.2
)
A
Distinguishcolor
Detail - A
.02"(0.6)
.01"
(0.4
).0
6"(1
.6)ø.02"
(ø0.6)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .59"
(15)
ø.05
"(ø
1.2)
.13"
(3.4
)
.09"
(2.4
)
.06"
(1.6
)
.02"(0.6)1.48"(37.7)1.75"(44.4)
ADistinguishcolor
.01"(0.4) .0
5"(1
.2)
ø.01"(ø0.3)
ø.01"(ø0.3)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .35"
(8.9)
ø.02
"(ø
0.6)
.10"
(2.5
)
1.48"(37.7)
.05"
(1.2
)
1.74"(44.2)
ADistinguishcolor
90Distinguishcolor
.03"
(0.8
)
.01"(0.4)
Detail - A(S=5/1)
ø.09
"(ø
2.4)
1.48"(37.7)
.10"
(2.5
)ø.
02"
(ø0.
6)
.35"(8.9)
1.74"(44.2)
.03"
(0.8
)
A
ø.09
"(ø
2.4)
3.45"(87.7) .04"(0.9)
ø.05"(ø1.2)
90
3.73"(94.7)
.30"
(7.6
)
.20"
(5.2
)
A
distinguishcolor
Detail - A
ø.09
"(ø
2.4)
5.42"(137.7) .04"(0.9)
.30"
(7.6
)
5.70"(144.7)
ø.05"(ø1.2)
90
.20"
(5.2
)
A
Distinguishcolor
Detail - A
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.28"(ø7.2)
R40
.14"(3.6).92"(23.5)
.14"(3.5)
.26"
(6.7
).1
4"(3
.6)
.22"(5.6).85"(21.5).11"(2.8)
Stylus tipposition
ø.12"(ø3)
R40
.02"
(0.6
)
.06"
(1.6
)
.14"
(3.6
)
.85"(21.5).22"(5.6).14"(3.6).92"(23.5) .06"(1.4)
.14"(3.5)
.61"(15.6)ø.28
"(ø
7.2)
.15"
(3.8
)
R2
Stylus tip position
R40 .1
4"(3
.6)
.05"(1.2).88"(22.3).85"(21.5) ø.07"
(ø1.9).08"(2)
.26"(6.7)
.14"(3.5) .1
5"(3
.8)
ø.28
"(ø
7.2)
Stylus tip position
ø.27"(ø7)
.05"
(1.3
)
.14"
(3.6
)
.16"(4)
.85"(21.5).39"(10)
.14"(3.5)Stylus tip position
R40
.22"(5.6).85"(21.5)
.14"(3.6).92"(23.5)
.14"(3.5)
.14"
(3.6
)
ø.28
"(ø
7.2)
.27"(6.8)
.29"
(7.5
)
Stylus tipposition
150
Standard type12AAC731 [.08"(2m)]*1
12AAB403 [.18"(5m)]12AAB415 [.39"(10m)][ ]: Tip radius
Small hole type12AAC732 [.08"(2m)]*1
12AAB404 [.18"(5m)]12AAB416 [.39"(10m)][ ]: Tip radius
Extra small hole type12AAC733 [.08"(2m)]*1
12AAB405 [.18"(5m)]12AAB417 [.39"(10m)][ ]: Tip radius
Extra small hole type
Deep hole type
12AAC734 [.08"(2m)]*1
12AAB406 [.18"(5m)]12AAB418 [.39"(10m)][ ]: Tip radius
2 x stylus12AAC740 [.08"(2m)]12AAB413 [.18"(5m)]12AAB425 [.39"(10m)][ ]: Tip radius
3 x stylus12AAC741 [.08"(2m)]*1
12AAB414 [.18"(5m)]12AAB426 [.39"(10m)][ ]: Tip radius
12AAB355
12AAB344 12AAB345
12AAB346
12AAB347
Skidless nosepiece
Stylus Applicable skid nosepiece
*1 Tip angle is 60
Stylus Applicable skid nosepieceUnit: Inch/(Metric)
ø.55"(ø14).2
7"(6
.8)
.14"
(3.6
)
.55"(14)2.36"(60)1.07"(27.2)
ø.31
"( ø
8)
ø.55
"( ø
14).94"(24)
.41"
(10.
4)
.11"(2.8)
DetectorSkid nosepiece (12AAB344)Stylus
ø.55"(ø
14)
ø.27"
(ø7)
.39"(10).12"(3.1)
.14"
(3.6
).05"
(1.3
)
Skidless nosepiece(12AAB355)
90
.03"(0.9)
1.48"(37.7)
.30"
(7.6
)
1.76"(44.7)
ø.09
"( ø
2.4) ø.05"
(ø1.2)
.20"
(5.2
)
A
Distinguishcolor
Detail - A
.02"(0.6)
.01"
(0.4
).0
6"(1
.6)ø.02"
(ø0.6)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .59"
(15)
ø.05
"(ø
1.2)
.13"
(3.4
)
.09"
(2.4
)
.06"
(1.6
)
.02"(0.6)1.48"(37.7)1.75"(44.4)
ADistinguishcolor
.01"(0.4) .0
5"(1
.2)
ø.01"(ø0.3)
ø.01"(ø0.3)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .35"
(8.9)
ø.02
"(ø
0.6)
.10"
(2.5
)
1.48"(37.7)
.05"
(1.2
)
1.74"(44.2)
ADistinguishcolor
90Distinguishcolor
.03"
(0.8
)
.01"(0.4)
Detail - A(S=5/1)
ø.09
"(ø
2.4)
1.48"(37.7)
.10"
(2.5
)ø.
02"
(ø0.
6)
.35"(8.9)
1.74"(44.2)
.03"
(0.8
)
A
ø.09
"(ø
2.4)
3.45"(87.7) .04"(0.9)
ø.05"(ø1.2)
90
3.73"(94.7)
.30"
(7.6
)
.20"
(5.2
)
A
distinguishcolor
Detail - A
ø.09
"(ø
2.4)
5.42"(137.7) .04"(0.9)
.30"
(7.6
)
5.70"(144.7)
ø.05"(ø1.2)
90
.20"
(5.2
)
A
Distinguishcolor
Detail - A
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.28"(ø7.2)
R40
.14"(3.6).92"(23.5)
.14"(3.5)
.26"
(6.7
).1
4"(3
.6)
.22"(5.6).85"(21.5).11"(2.8)
Stylus tipposition
ø.12"(ø3)
R40
.02"
(0.6
)
.06"
(1.6
)
.14"
(3.6
)
.85"(21.5).22"(5.6).14"(3.6).92"(23.5) .06"(1.4)
.14"(3.5)
.61"(15.6)ø.28
"( ø
7.2)
.15"
(3.8
)
R2
Stylus tip position R
40 .14"
(3.6
)
.05"(1.2).88"(22.3).85"(21.5) ø.07"
(ø1.9).08"(2)
.26"(6.7)
.14"(3.5) .1
5"(3
.8)
ø.28
"( ø
7.2)
Stylus tip position
ø.27"(ø7)
.05"
(1.3
)
.14"
(3.6
)
.16"(4)
.85"(21.5).39"(10)
.14"(3.5)Stylus tip position
R40
.22"(5.6).85"(21.5)
.14"(3.6).92"(23.5)
.14"(3.5)
.14"
(3.6
)
ø.28
"( ø
7.2)
.27"(6.8)
.29"
(7.5
)
Stylus tipposition
150
Standard type12AAC731 [.08"(2m)]*1
12AAB403 [.18"(5m)]12AAB415 [.39"(10m)][ ]: Tip radius
Small hole type12AAC732 [.08"(2m)]*1
12AAB404 [.18"(5m)]12AAB416 [.39"(10m)][ ]: Tip radius
Extra small hole type12AAC733 [.08"(2m)]*1
12AAB405 [.18"(5m)]12AAB417 [.39"(10m)][ ]: Tip radius
Extra small hole type
Deep hole type
12AAC734 [.08"(2m)]*1
12AAB406 [.18"(5m)]12AAB418 [.39"(10m)][ ]: Tip radius
2 x stylus12AAC740 [.08"(2m)]12AAB413 [.18"(5m)]12AAB425 [.39"(10m)][ ]: Tip radius
3 x stylus12AAC741 [.08"(2m)]*1
12AAB414 [.18"(5m)]12AAB426 [.39"(10m)][ ]: Tip radius
12AAB355
12AAB344 12AAB345
12AAB346
12AAB347
Skidless nosepiece
Stylus Applicable skid nosepiece
*1 Tip angle is 60
Stylus Applicable skid nosepieceUnit: Inch/(Metric)
Detector
178-396-2: 0.75mN measuring force, with 12AAC731 standard type stylus (2µm tip radius)
178-397-2: 4mN measuring force, with 12AAB403 standard type stylus (5µm tip radius)
Set configuration/Dimensions
ø.55"(ø14)
.27"
(6.8
).1
4"(3
.6)
.55"(14)2.36"(60)1.07"(27.2)
ø.31
"(ø
8)
ø.55
"( ø
14).94"(24)
.41"
(10.
4)
.11"(2.8)
DetectorSkid nosepiece (12AAB344)Stylus
ø.55"(ø
14)
ø.27"
(ø7)
.39"(10).12"(3.1)
.14"
(3.6
).05"
(1.3
)
Skidless nosepiece(12AAB355)
90
.03"(0.9)
1.48"(37.7)
.30"
(7.6
)
1.76"(44.7)
ø.09
"(ø
2.4) ø.05"
(ø1.2)
.20"
(5.2
)
A
Distinguishcolor
Detail - A
.02"(0.6)
.01"
(0.4
).0
6"(1
.6)ø.02"
(ø0.6)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .59"
(15)
ø.05
"(ø
1.2)
.13"
(3.4
)
.09"
(2.4
)
.06"
(1.6
)
.02"(0.6)1.48"(37.7)1.75"(44.4)
ADistinguishcolor
.01"(0.4) .0
5"(1
.2)
ø.01"(ø0.3)
ø.01"(ø0.3)
90
(S=5/1)Detail - A
ø.09
"(ø
2.4) .35"
(8.9)
ø.02
"(ø
0.6)
.10"
(2.5
)
1.48"(37.7)
.05"
(1.2
)
1.74"(44.2)
ADistinguishcolor
90Distinguishcolor
.03"
(0.8
)
.01"(0.4)
Detail - A(S=5/1)
ø.09
"(ø
2.4)
1.48"(37.7)
.10"
(2.5
)ø.
02"
(ø0.
6)
.35"(8.9)
1.74"(44.2)
.03"
(0.8
)
A
ø.09
"(ø
2.4)
3.45"(87.7) .04"(0.9)
ø.05"(ø1.2)
90
3.73"(94.7)
.30"
(7.6
)
.20"
(5.2
)
A
distinguishcolor
Detail - A
ø.09
"(ø
2.4)
5.42"(137.7) .04"(0.9)
.30"
(7.6
)
5.70"(144.7)
ø.05"(ø1.2)
90
.20"
(5.2
)
A
Distinguishcolor
Detail - A
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.28"(ø7.2)
R40
.14"(3.6).92"(23.5)
.14"(3.5)
.26"
(6.7
).1
4"(3
.6)
.22"(5.6).85"(21.5).11"(2.8)
Stylus tipposition
ø.12"(ø3)
R40
.02"
(0.6
)
.06"
(1.6
)
.14"
(3.6
)
.85"(21.5).22"(5.6).14"(3.6).92"(23.5) .06"(1.4)
.14"(3.5)
.61"(15.6)ø.28
"(ø
7.2)
.15"
(3.8
)
R2
Stylus tip position
R40 .1
4"(3
.6)
.05"(1.2).88"(22.3).85"(21.5) ø.07"
(ø1.9).08"(2)
.26"(6.7)
.14"(3.5) .1
5"(3
.8)
ø.28
"(ø
7.2)
Stylus tip position
ø.27"(ø7)
.05"
(1.3
)
.14"
(3.6
)
.16"(4)
.85"(21.5).39"(10)
.14"(3.5)Stylus tip position
R40
.22"(5.6).85"(21.5)
.14"(3.6).92"(23.5)
.14"(3.5)
.14"
(3.6
)
ø.28
"(ø
7.2)
.27"(6.8)
.29"
(7.5
)
Stylus tipposition
150
Standard type12AAC731 [.08"(2m)]*1
12AAB403 [.18"(5m)]12AAB415 [.39"(10m)][ ]: Tip radius
Small hole type12AAC732 [.08"(2m)]*1
12AAB404 [.18"(5m)]12AAB416 [.39"(10m)][ ]: Tip radius
Extra small hole type12AAC733 [.08"(2m)]*1
12AAB405 [.18"(5m)]12AAB417 [.39"(10m)][ ]: Tip radius
Extra small hole type
Deep hole type
12AAC734 [.08"(2m)]*1
12AAB406 [.18"(5m)]12AAB418 [.39"(10m)][ ]: Tip radius
2 x stylus12AAC740 [.08"(2m)]12AAB413 [.18"(5m)]12AAB425 [.39"(10m)][ ]: Tip radius
3 x stylus12AAC741 [.08"(2m)]*1
12AAB414 [.18"(5m)]12AAB426 [.39"(10m)][ ]: Tip radius
12AAB355
12AAB344 12AAB345
12AAB346
12AAB347
Skidless nosepiece
Stylus Applicable skid nosepiece
*1 Tip angle is 60
Stylus Applicable skid nosepieceUnit: Inch/(Metric)
*1 Tip angle is 60 *2 When using this stylus the measuring force at the detector cannot be guaranteed.
Stylus Applicable skid nosepiece
Deep groove type*2
12AAC735 [.08"(2m)]*1
12AAB409 [.18"(5m)]12AAB421 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC736 [.08"(2m)]*1
12AAB408 [.18"(5m)]12AAB420 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC737 [.08"(2m)]*1
12AAB407 [.18"(5m)]12AAB419 [.39"(10m)][ ]: Tip radius
Gear face type
Eccentric type*2
12AAB339 [.08"(2m)]*1
12AAB410 [.18"(5m)]12AAB422 [.39"(10m)][ ]: Tip radius
12AAC739 [.08"(2m)]*1
12AAB412 [.18"(5m)]12AAB424 [.39"(10m)][ ]: Tip radius
Knife edge type
12AAC738 [.08"(2m)]*1
12AAB411 [.18"(5m)]12AAB423 [.39"(10m)][ ]: Tip radius
WE-curve type12AAB338
12AAB349 12AAB350
12AAB351 12AAB352
12AAB348
12AAB353
12AAB354
.51"
(13)
ø.09
"(ø
2.4)
.03"(0.9)
ø.05"(ø1.2)
90
.56"
(14.
2)
1.48"(37.7)1.76"(44.7)
A
Distinguish Color
Detail - A
.91"
(23)
.03"(0.9)
ø.09
"(ø
2.4)
.95"
(24.
2)
ø.05"(ø1.2)
90
1.48"(37.7)1.76"(44.7)
A
Detail - A
Distinguishcolor
1.38
"(35
)1.
33"(
33.8
)
.20"
(5.2
)
ø.05"(ø1.2)
ADistinguish color
ø.09"(ø2.4)
ø.09
"(ø
2.4)
90
1.48"(37.7)1.78"(45.2)
Detail - A
60
60
.30"
(7.6
).25"
(6.4
)
1.48"(37.7)1.72"(43.8)
ø.05"
(ø1.2)
ø.09
"(ø
2.4) A
Distinguish color
Detail - A
.30"
(7.6
)
ø.09
"(ø
2.4)
ø.05"(ø1.2)
.03"(0.9)1.48"(37.7)1.76"(44.7)
Ball ø.06"(ø1.588)
.20"
(5.2
)
.30"
(7.6
)
ø.09
"(ø
2.4) ø.05"
(ø1.2)
90
1.48"(37.7) .03"(0.9)1.76"(44.7)
ADistinguishcolor
Detail - A
A
Detail - A
1.48"(37.7).03"(0.9)
90ø.02"(ø0.6)
Distinguishcolor
1.77"(45)
.30"
(7.6
)
.39"(10)
ø.09
"(ø2
.4)
ø.09
"(ø
2.4)
ø.55"(ø14) ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
R40
.50"
(12.
8).0
2"(0
.6)
.05"(1.4).05"(1.4)
.14"(3.5) .15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.18"
(4.5
)
.14"
(3.6
)
.39"
(10)
.35"(9)
ø.28
"(ø
7.2)
Stylus tip position R2
.17"(4.4)
ø.28"(ø7.2)
R40
.14"(3.6).93"(23.5).05"(1.4)
.53"
(13.
4)
.85"(21.5) .22"(5.6)
.14"
(3.6
)
.11"(2.8)
.39"
(10)
.14"(3.5)
Stylus tip position
R2
ø.28
"(ø
7.2)
.33"
(8.4
)
.14"
(3.6
)
.15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.14"(3.5)
.53"
(13.
4)
.10"(2.5)
.20"
(5)
.35"(9)
.39"
(10)
Stylus tip position
ø.06"(ø1.5)
R40
.70"
(17.
9)
ø.28
"(ø
7.2)
.14"(3.5)
.85"(21.5) .20"(5)
.12"(3).12"(3) .0
4"(1
).1
4"(3
.6)
.18"
(4.5
).5
3"(1
3.4)
.35"(9)
.05"(1.4).20"
(5)
.46"(11.6)
.39"
(10)
R2.39"(10)
Stylus tip position
ø.55"(ø14)
R40
.14"(3.5)
.15"(3.8).77"(19.5).07"(1.8).85"(21.5)
.90"
(22.
8).0
2"(0
.6)
.05"(1.4)
1.06
"(27
)
.79"
(20)
ø.28
"(ø7
.2)
.35"(9)
Stylus tip position R2
.05"(1.4)
.17"(4.4)
R40
.05"(1.4)
.14"(3.5)
.02"(0.5).85"(21.5)
ø.28
"( ø
7.2)
.78"(19.7).09"(2.3)
.24"
(6.1
).1
8"(4
.5)
.02"
(0.6
)
.05"(1.4)
.14"
(3.6
)
.09"(2.3)
R2Stylus tipposition
.17"(4.4)
R40
.85"(21.5)
.26"
(6.7
)
ø.28
"(ø
7.2)
.22"(5.6)
.14"(3.6)
.14"
(3.6
)
.14"(3.5)
.93"(23.5) .11"(2.8)Stylus tip position
Flat
Unit: Inch/(Metric)
*1 Tip angle is 60 *2 When using this stylus the measuring force at the detector cannot be guaranteed.
Stylus Applicable skid nosepiece
Deep groove type*2
12AAC735 [.08"(2m)]*1
12AAB409 [.18"(5m)]12AAB421 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC736 [.08"(2m)]*1
12AAB408 [.18"(5m)]12AAB420 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC737 [.08"(2m)]*1
12AAB407 [.18"(5m)]12AAB419 [.39"(10m)][ ]: Tip radius
Gear face type
Eccentric type*2
12AAB339 [.08"(2m)]*1
12AAB410 [.18"(5m)]12AAB422 [.39"(10m)][ ]: Tip radius
12AAC739 [.08"(2m)]*1
12AAB412 [.18"(5m)]12AAB424 [.39"(10m)][ ]: Tip radius
Knife edge type
12AAC738 [.08"(2m)]*1
12AAB411 [.18"(5m)]12AAB423 [.39"(10m)][ ]: Tip radius
WE-curve type12AAB338
12AAB349 12AAB350
12AAB351 12AAB352
12AAB348
12AAB353
12AAB354
.51"
(13)
ø.09
"( ø
2.4)
.03"(0.9)
ø.05"(ø1.2)
90
.56"
(14.
2)
1.48"(37.7)1.76"(44.7)
A
Distinguish Color
Detail - A
.91"
(23)
.03"(0.9)
ø.09
"(ø
2.4)
.95"
(24.
2)
ø.05"(ø1.2)
90
1.48"(37.7)1.76"(44.7)
A
Detail - A
Distinguishcolor
1.38
"(35
)1.
33"(
33.8
)
.20"
(5.2
)
ø.05"(ø1.2)
ADistinguish color
ø.09"(ø2.4)
ø.09
"(ø
2.4)
90
1.48"(37.7)1.78"(45.2)
Detail - A
60
60
.30"
(7.6
).25"
(6.4
)
1.48"(37.7)1.72"(43.8)
ø.05"
(ø1.2)
ø.09
"(ø
2.4) A
Distinguish color
Detail - A
.30"
(7.6
)
ø.09
"(ø
2.4)
ø.05"(ø1.2)
.03"(0.9)1.48"(37.7)1.76"(44.7)
Ball ø.06"(ø1.588)
.20"
(5.2
)
.30"
(7.6
)
ø.09
"(ø
2.4) ø.05"
(ø1.2)
90
1.48"(37.7) .03"(0.9)1.76"(44.7)
ADistinguishcolor
Detail - A
A
Detail - A
1.48"(37.7).03"(0.9)
90ø.02"(ø0.6)
Distinguishcolor
1.77"(45)
.30"
(7.6
)
.39"(10)
ø.09
"(ø2
.4)
ø.09
"(ø
2.4)
ø.55"(ø14) ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
R40
.50"
(12.
8).0
2"(0
.6)
.05"(1.4).05"(1.4)
.14"(3.5) .15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.18"
(4.5
)
.14"
(3.6
)
.39"
(10)
.35"(9)
ø.28
"( ø
7.2)
Stylus tip position R2
.17"(4.4)
ø.28"(ø7.2)
R40
.14"(3.6).93"(23.5).05"(1.4)
.53"
(13.
4)
.85"(21.5) .22"(5.6)
.14"
(3.6
)
.11"(2.8)
.39"
(10)
.14"(3.5)
Stylus tip position
R2
ø.28
"( ø
7.2)
.33"
(8.4
)
.14"
(3.6
)
.15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.14"(3.5)
.53"
(13.
4)
.10"(2.5)
.20"
(5)
.35"(9)
.39"
(10)
Stylus tip position
ø.06"(ø1.5)
R40
.70"
(17.
9)
ø.28
"(ø
7.2)
.14"(3.5)
.85"(21.5) .20"(5)
.12"(3).12"(3) .0
4"(1
).1
4"(3
.6)
.18"
(4.5
).5
3"(1
3.4)
.35"(9)
.05"(1.4).20"
(5)
.46"(11.6)
.39"
(10)
R2.39"(10)
Stylus tip position
ø.55"(ø14)
R40
.14"(3.5)
.15"(3.8).77"(19.5).07"(1.8).85"(21.5)
.90"
(22.
8).0
2"(0
.6)
.05"(1.4)
1.06
"(27
)
.79"
(20)
ø.28
"(ø7
.2)
.35"(9)
Stylus tip position R2
.05"(1.4)
.17"(4.4)
R40
.05"(1.4)
.14"(3.5)
.02"(0.5).85"(21.5)
ø.28
"( ø
7.2)
.78"(19.7).09"(2.3)
.24"
(6.1
).1
8"(4
.5)
.02"
(0.6
)
.05"(1.4)
.14"
(3.6
)
.09"(2.3)
R2Stylus tipposition
.17"(4.4)
R40
.85"(21.5)
.26"
(6.7
)
ø.28
"(ø
7.2)
.22"(5.6)
.14"(3.6)
.14"
(3.6
)
.14"(3.5)
.93"(23.5) .11"(2.8)Stylus tip position
Flat
Unit: Inch/(Metric)
*1 Tip angle is 60 *2 When using this stylus the measuring force at the detector cannot be guaranteed.
Stylus Applicable skid nosepiece
Deep groove type*2
12AAC735 [.08"(2m)]*1
12AAB409 [.18"(5m)]12AAB421 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC736 [.08"(2m)]*1
12AAB408 [.18"(5m)]12AAB420 [.39"(10m)][ ]: Tip radius
Extra deep groove type*2
12AAC737 [.08"(2m)]*1
12AAB407 [.18"(5m)]12AAB419 [.39"(10m)][ ]: Tip radius
Gear face type
Eccentric type*2
12AAB339 [.08"(2m)]*1
12AAB410 [.18"(5m)]12AAB422 [.39"(10m)][ ]: Tip radius
12AAC739 [.08"(2m)]*1
12AAB412 [.18"(5m)]12AAB424 [.39"(10m)][ ]: Tip radius
Knife edge type
12AAC738 [.08"(2m)]*1
12AAB411 [.18"(5m)]12AAB423 [.39"(10m)][ ]: Tip radius
WE-curve type12AAB338
12AAB349 12AAB350
12AAB351 12AAB352
12AAB348
12AAB353
12AAB354
.51"
(13)
ø.09
"(ø
2.4)
.03"(0.9)
ø.05"(ø1.2)
90
.56"
(14.
2)
1.48"(37.7)1.76"(44.7)
A
Distinguish Color
Detail - A
.91"
(23)
.03"(0.9)
ø.09
"(ø
2.4)
.95"
(24.
2)
ø.05"(ø1.2)
90
1.48"(37.7)1.76"(44.7)
A
Detail - A
Distinguishcolor
1.38
"(35
)1.
33"(
33.8
)
.20"
(5.2
)
ø.05"(ø1.2)
ADistinguish color
ø.09"(ø2.4)
ø.09
"(ø
2.4)
90
1.48"(37.7)1.78"(45.2)
Detail - A
60
60
.30"
(7.6
).25"
(6.4
)
1.48"(37.7)1.72"(43.8)
ø.05"
(ø1.2)
ø.09
"(ø
2.4) A
Distinguish color
Detail - A
.30"
(7.6
)
ø.09
"(ø
2.4)
ø.05"(ø1.2)
.03"(0.9)1.48"(37.7)1.76"(44.7)
Ball ø.06"(ø1.588)
.20"
(5.2
)
.30"
(7.6
)
ø.09
"(ø
2.4) ø.05"
(ø1.2)
90
1.48"(37.7) .03"(0.9)1.76"(44.7)
ADistinguishcolor
Detail - A
A
Detail - A
1.48"(37.7).03"(0.9)
90ø.02"(ø0.6)
Distinguishcolor
1.77"(45)
.30"
(7.6
)
.39"(10)
ø.09
"(ø2
.4)
ø.09
"(ø
2.4)
ø.55"(ø14) ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
ø.55"(ø14)
R40
.50"
(12.
8).0
2"(0
.6)
.05"(1.4).05"(1.4)
.14"(3.5) .15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.18"
(4.5
)
.14"
(3.6
)
.39"
(10)
.35"(9)
ø.28
"(ø
7.2)
Stylus tip position R2
.17"(4.4)
ø.28"(ø7.2)
R40
.14"(3.6).93"(23.5).05"(1.4)
.53"
(13.
4)
.85"(21.5) .22"(5.6)
.14"
(3.6
)
.11"(2.8)
.39"
(10)
.14"(3.5)
Stylus tip position
R2
ø.28
"(ø
7.2)
.33"
(8.4
)
.14"
(3.6
)
.15"(3.8).77"(19.5)
.07"(1.8).85"(21.5)
.14"(3.5)
.53"
(13.
4)
.10"(2.5)
.20"
(5)
.35"(9)
.39"
(10)
Stylus tip position
ø.06"(ø1.5)
R40
.70"
(17.
9)
ø.28
"( ø
7.2)
.14"(3.5)
.85"(21.5) .20"(5)
.12"(3).12"(3) .0
4"(1
).1
4"(3
.6)
.18"
(4.5
).5
3"(1
3.4)
.35"(9)
.05"(1.4).20"
(5)
.46"(11.6)
.39"
(10)
R2.39"(10)
Stylus tip position
ø.55"(ø14)
R40
.14"(3.5)
.15"(3.8).77"(19.5).07"(1.8).85"(21.5)
.90"
(22.
8).0
2"(0
.6)
.05"(1.4)
1.06
"(27
)
.79"
(20)
ø.28
"(ø7
.2)
.35"(9)
Stylus tip position R2
.05"(1.4)
.17"(4.4)
R40
.05"(1.4)
.14"(3.5)
.02"(0.5).85"(21.5)
ø.28
"( ø
7.2)
.78"(19.7).09"(2.3)
.24"
(6.1
).1
8"(4
.5)
.02"
(0.6
)
.05"(1.4)
.14"
(3.6
)
.09"(2.3)
R2Stylus tipposition
.17"(4.4)
R40
.85"(21.5)
.26"
(6.7
)
ø.28
"(ø
7.2)
.22"(5.6)
.14"(3.6)
.14"
(3.6
)
.14"(3.5)
.93"(23.5) .11"(2.8)Stylus tip position
Flat
Unit: Inch/(Metric)
(12AAG202: 1.97"(50mm), 12AAG203: 3.94"(100mm)
Extension Rods
Stand, Tables
178-042-1 (mm)178-052-1 (inch/mm)
178-049 (mm)178-059 (inch/mm)
XY leveling tables 7 43
13
178-043-1 (mm)178-053-1 (inch/mm)
Optional Accessories
Order No. 178-042-1,178-052-1 178-043-1,178-053-1 178-049,178-059Table size 5.12” x 3.94”(130 x 100mm)Maximum loading 15kgfInclination angle ±1.5˚ —Horizontal rotating angle ±3˚ —X, Y axis displacement ±.49”(12.5mm) ±.49”(12.5mm) ±.49”(12.5mm)Min. readingof the micrometer head
.00005”(0.001mm)* .001”(0.001mm)* .00005”(0.001mm)*
Dimension 10.31"x9.17"x3.27" (262x233x83mm)
8.66"x7.44"x3.27" (220x189x83mm)
10.31"x9.17"x2.16" (262x233x55mm)
Mass 13.89 lbs. (6.3kg) 13.22 lbs. (6kg) 11.02 lbs. (5kg)
* Digital display
Applicable skid nosepiece Inch(mm)
Inch(mm)
12 13
2.26" (57.5)
ø1.97" (ø50)
.08"
(2)
3.90" (99)
3.11" (79)
Leveling table (for D.A.T. function)• Can be used with the XY leveling tables. Table swivels: ±1.5° Table size: 5.12"x3.94"
(130x100mm) Max. Loading: 15kgf
Memory cardStores/recalls the measuring conditions (up to 20), measured data, and statistical data.Memory: 8MB
Measuring data output Others
Manual column standColumn travel: 7.87"(200mm)Dimensions: 14.57"x7.87"x29.13"
(370x200x740mm)Mass: 28.66 lbs. (13kg)
264-005
DP-1VRPerforms various statistical processing
Cylinder attachmentUsed to attach on a cylinderDiameter: ø.59" up to 2.36" (ø15mm up to 60mm)
SPC connecting cablesConnects a control unit with DP-1VR. 3'(1m): 936937 6'(2m): 965014
Reference step specimenUsed to calibrate detector sensitivity.Step nominal value: 2µm/10µm
LCD protective sheetFor touch panel protection(10 sheet set)
Printer paperFive rolls 984'(25m)Standard paper: 270732Durable paper: 12AAA879
178-009178-048 (mm)178-058 (inch/mm)
178-611 (mm)178-612 (inch/mm)
178-019
Precision vise• Can be used with the XY leveling table.
Input toolData input device for spreadsheet software.
264-503A (120V)
12AAA841
12AAA896
12AAB358
Order No 178-019Clamping method Sliding jawsJaw opening 1.42”(36mm)Jaw width 1.73”(44mm)Jaw depth .63”(16mm)Height 1.50”(38mm)
Form Measurement
Aurora, Illinois(Corporate Headquarters)(630) 978-5385Westford, Massachusetts(978) 692-8765Huntersville, North Carolina(704) 875-8332Mason, Ohio(513) 754-0709Plymouth, Michigan(734) 459-2810City of Industry, California(626) 961-9661Kirkland, Washington(408) 396-4428
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require prior approval by an appropriate governing authority.
Trademarks and RegistrationsDesignations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information.
© 2011 Mitutoyo America Corporation, Aurora IL 1110-04 Printed in USA, January 2011
Specifications are subject to change without notice.
Aurora, Illinois(Corporate Headquarters)
Westford, Massachusetts
Huntersville, North Carolina
Mason, Ohio
Plymouth, Michigan
City of Industry, California
One Number to Serve You Better1-888-MITUTOYO (1-888-648-8869)