Download - SWEEPER USER MANUAL - Biorez Wellness
SWEEPERUSER MANUAL
Sweeper Set
SWEEPER Device Induction loopHand electrodes
Cables for electrodes
Transport bagOperating Manual
SD Card with programs
Battery charger and USB
REK
OM
END
AC
JE
SUPLEMENT DO INSTRUKCJI OBSŁUGI
SUPL
EMEN
T D
O IN
STRU
KCJI
OBS
ŁUG
I
R E K O M E N D A C J E
D O U Ż Y T K O W A N I A
ENSO ELECTRONICSSWEEPER
QR CODEWygenerowano na www.qr-online.pl
ul. Korkowa 804-502 Warszawa22 358 55 5022 358 55 [email protected]: 113-27-72-102
INSTRUKCJA OBSŁUGI URZĄDZENIA
SWEEPER
3NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
I. DESCRIPTION OF THE DEVICE
1. OVERVIEWSweeper (hereinafter referred to as the „device”) is a mobile, electronic, programmable in-strument for generating electromagnetic frequencies of small intensity and an inductive field.It includes two independent generators:
- generator with output electrodes (range from 1 to 3,000,000 Hz) and a modulation option;
- generator of an electromagnetic field of small intensity with an output inductor (induction loop, range from 1 to 100,000 Hz, including from 25,000 Hz to 100,000 Hz harmonically).
The device can generate frequencies both using one of the generators and two at the same time, with independent frequency settings within their ranges.Every generator has an option of regulating amplitude of pulse oscillation and „pulsating” frequencies within the limits set by the user.Built-in device memory is divided into a read-only memory that stores factory programs genera-ting frequencies and a rewritable memory for programs created by the user using an appropria-te software. User can manually enter and save the frequencies in Hz and kHz.
4 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
Programs stored in „Composition” Menu using buttons controlling the device are stored se-parately from the „Personal Programs”. Menu programs that includes programs transferred by USB port with software installed on the computer.The device includes a microSD slot and is compatible with cards up to 2GB which significantly increases a number of programs you can save. The device has sockets for electrodes and exter-nal inductor. Built-in battery can be charged using miniUSB slot, the same you use to connect it to the computer.
2. SPECIFICATIONPARAMETER VALUE
Used electric current, at most 20 mA
Range of generated frequencies 1 to 3 000 000 Hz
Regulating amplitude of generators output To 18 V
Regulating signal intensity of electrodes generator 10 levels
Regulating signal intensity of inductor generator 4 levels
Modulation (for the generator of electrodes) To 100 000 Hz
5NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
PARAMETER VALUE
Pulse range 1 to 3 000 000 Hz
Display resolution 128 x 64 px
Compatibility with microSD cards to 2 GB Incompatible with SDHC
Size 105 x 65 x 19 mm
Weight without the package, at most 0,112 kg
Weight of the set with package 1,382 kg
How long the device can run continously* 8 hours
Power supply from the built-in battery (of NOKIA BL-4B type) Volume - 700 mAh voltage - 3,7 V
Charging battery via USB
* With normal intensity level that does not exceed an average and normal distribution of frequ-encies under standard load (50-100 kQ).
6 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
3. DEVICE STRUCTURELEGEND:1 – Display2 – On and off button3 – Select button4 – Menu navigation buttons - „up”5 – Menu navigation buttons - „down”6 – microSD card slot7 – slot for connecting left manual electrode8 – USB power slot9 – slot for connecting right manual electrode10 – socket for an external inductor (induction loop)
7NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
2
10
4
3
5
6
98
7
1
Fig 1 Device structureThe Producer reserves the right to change the configuration of the front panel in a way that does not lower the quality or convenience of operation of the device.
8 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
4. SYMBOLS THAT APPEAR ON THE DISPLAYSYMBOL DESCRIPTION
Displaying time on the internal clock in 24-hour mode
Marks the intensity of generators: electrodes (E) and inductor (I)
Sensor of interruption of generators’ circuit: electrodes (E) and inductor (I)
Sensor of device lock: electrodes (E) and inductor (I)
Only in the „Composition” mode. From left: number of the program and cell number
Sensor of program execution
Sensor of a group of programs execution
9NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
SYMBOL DESCRIPTION
Sensor of charged battery
Sensor of disabled sound
5. CONTRAINDICATIONSIf a patient has an internal pacemaker, they absolutely cannot use the device.The relative contraindications (unless the specialist recommends otherwise) include:
– malignant and benign cancers;– epilepsy;– pregnancy;– acute coronary syndromes and acute cerebral blood flow disorders– bleeding disorders;– personal hypersensitivity to the influence of electromagnetic effect– injured skin and skin diseases where skin touches the electrodes– acute psychic agitation or inebriation
10 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
6. PRECAUTIONSWARNINGIf the device signals the need for charging the internal battery, you should charge the device and you cannot try to turn it on multiple time when doing so. This can damage the battery.
When the generator runs on frequencies higher than 200 kHz, power input is increased and con-sequently, the operating time of the device after a full charge is shortened. You absolutely cannot use the device during charging.
You cannot use the electric output of the generator for a long work with an external load of re-sistance exceeding 10 kQ, for example with a vessel or fluid.
- The device is constructed according to the requirements for products with an external power source (IEC 601-1-88).
- If you detect any irregularities in the operation of the device, you have to shut it down immediately.
- Do not use the device that has visible external damage (broken frame, broken display).
- Do not place the device close to open fire source.- Do not expose the device to direct sunlight.- Keep the device in a place where children cannot reach it.
11NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
- Do not use the device in the bathroom and humid rooms.- Children can use the device only if supervised by an adult.- Do not place the device in a microwave.- Do not disassemble the device.- Do not immerse the device in water.- Prevent the device from falling down.- Prevent other objects from falling down on the device.- Do not pull out cords rapidly from the device sockets.- Protect the device against sudden changes of temperature.
7. PREPARING FOR WORKAfter taking the device out of the package please check it for mechanical damage.After transport or storage in low temperature, the device cannot be switched on for at least two hours of keeping in a room temperature.
12 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
8. CONNECTING THE DEVICEYou should hold ma-nual electrodes in your hands. You can also place them under you feet if you have pro-blem with your low-er limbs.Place the induction loop close to the afflic-ted area. You can put it around your neck, hang over your shoul-der, place on your hips, joints, etc.
13NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
II. WORK WITH THE DEVICE
1. TURNING ON AND OFFYou will see a welcome screen on the display and after a few seconds the device will go to a language selection mode. You will see a list of available languages. Use „up” and „down” but-tons to move up and down in a menu and select a language by pressing a selection button
„OK”. This is also how you generally move in all the menus of the device.You will see main menu on the display and a vo-ice message will inform you that the device is re-ady for use.
FIG. 1 Main menu
14 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
MAIN MENU EXPLANATIONS
Generator Includes submenu for settings and starting the frequency gene-rators
Basic set of programs Includes 3 producer’s programs
Personal programs Includes submenu for launching programs saved via USB port Programs on SD-card Includes submenu for launching program from the inserted SD
cardSettings Includes submenu for settings of the device
You turn off the device by pressing and holding the „on/off” button . If the device is in the program execution mode, you have to stop the program first.The device will turn off automatically if you won’t press any buttons for a period of time set in the „Settings” menu, „Auto shutdown” option and no correct program is selected. You turn off the de-vice by pressing and holding the „on/off” button. If the device is in the program execution mode, you have to stop the program first.The device will turn off automatically if you won’t press any buttons for a period of time set in the „Settings” menu, „Auto shutdown” option.
15NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
2. WORKING WITH THE GENERATOR„GENERATOR” has two functions: „Tryb ręczny” and „Kompozycja”.
MENU „GENERATOR” EXPLANATIONS
Manual mode Entry to „Manual mode” submode.
Composition Entry to „Composition” submode. Arranging the frequency programs using the device
Return Return to the main menu (pushing the button always takes you up one level)
2.1 MANUAL MODEThis mode is used for setting a specific frequen-cy in the device or a sweeping function using the electrodes and inductor operating together or separately.The mode is divided into a several submodes that enable to individually set a program of frequ-ency therapy. To set a specific frequency or a set of frequencies use buttons , , and
FIG. 2 „Manual mode” Menu
16 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
„MANUAL MODE” SUBMENU EXPLANATIONS
Electrodes on/off Turning on/off output electrodes
Frequency 0,00 – 3 000 000,00 Hz Generator 1 frequency value
Slide to 0,00 – 3 000 000,00 Hz Generator 1 final value
Modulation 0,00 – 100 000,00 Hz Modulation frequency
Inductor on/off Turning on/off output inductorr
Frequency 0,00 – 25 000,00 Hz Generator 2 frequency value
Slide to 0,00 – 25 000,00 Hz Generator 2 final frequency value
Duration 00:01 – 59:59 Program duration (MM:SS)
Run Starting generating program
Save As Saving the parameters in the „compositions” program compartment
Back Up one level
17NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
1. Electrodes - on/off – You turn on the electrodes mode by selecting mark or the mode is started automatically after entering frequency values.
2. Frequency – the mode enables to set a specific frequency.
Push button every time you want to move one entry to right or confirm the selected value and or to select the appropriate value.
3. Slide to – this mode enables to select a second frequency. After setting the frequency value (see item 2) and launching the program, the device will use the frequency range from items 2 to 3 as a sweeping mode.
4. Modulation – it is set automatically and is equal to 1/4th of the value of basic frequency. Used in the mode enables to have regular and short breaks during the therapy that are controlled by the device. FIG. 4
FIG. 3
18 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
It is also possible to set modulation individually if one knows the rules of physics.5. Inductor (induction loop) - You turn on the inductor mode by selecting mark or
the mode is started automatically after entering frequency values.6. Frequency – the mode enables to set a specific frequency. Push button every time you want to move one entry to right or confirm the
selected value and or to select the appropriate value.7. Slide to – this mode enables to select a second frequency. After setting the
frequency value (see item 2) and launching the program, the device will use the frequency range from items 2 to 3 as a sweeping mode
8. Duration – or will enable you to select the appropriate value and button will enable you to confirm the option.
9. Run – starts the manually set program.10. Save as – saves in the device memory
set frequency by adding it to the list of programs in the “Compositions” part (in the cell of your choice).
2.2 COMBINATIONS OF FREQUENCIES„Compositions” submode includes a list of nine programs. Each of them has nine programma- FIG. 5
19NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
ble cells. You program the cells using a menu similar to „Tryb ręczny” menu. The only difference between the menu settings in the manual mode and menu settings in the cell mode consists in the „Zapisz” line. After its selection a current cell is saved if there were changes in settings of ge-nerators’ parameters. „Kompozycja” enables to include several specialist frequencies in one pro-gram, e.g. Program 1:– (Cell 1) 7 Hz,
FIG. 6 List of programs FIG. 7 List of cells
FIG. 8 „Save” screen
20 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
– (Cell 2) 222-224 Hz,– (Cell 3) 10 kH
and launch them in one integrated mode („run all” option).„Cell” 1 - 9 - names the detailed program the frequency of which can be set manually as in item 2.1. „manual mode”.
3. FREQUENCY PULSESmooth change of frequencies takes place within a scope between amounts of the first and second value. If there is no „Przesuń” value entered, generation of frequencies will be constant.After entering your generators values eneter the duration of the generation program and launch the program. You will see a line of program’s progress and the remaining time on screen
3.1 BLOCKING / UNLOCKING / PAUSEDuring the program device’s buttons are locked to avoid accidental pushing. To unlock press simultaneously button and without pausing or stopping the program. The program will be paused. You will see a submenu on the screen.
21NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
SUBMENU EXPLANATIONS
Continue Remove the cause of break and continue the program
Connect the electrodes or inductor If required, connect the output
Abort Abort the program
The same submenu will be displayed if you interrupt the circuit. Program stops working and informs about the problem.Perform necessary actions.After the program is completed, you will see „Zakończono” information and hear a sound signal.If you press button twice, the device will resume the program with the same settings. If you press button or , you will go back to the menu of „Tryb ręczny” submode. Program with its settings can be saved in the „Kompozycje” program compartment for further use of the device memory..
3.2 REGULATING AMPLITUDEAmplitude of the electrodes has a 10-unit scale. It is situated in the top part of the screen next to E sign and displayed as lines. When increasing amplitude units you can have tingling sen-sation on your hand skin. You can regulate the amplitude of pulses on electrodes output with
22 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
buttons and . You have set the amplitude in a way that does not cause any discomfort on your hands during the execution of the program.Amplitude of the inductor (induction loop) has a 4-unit scale. It is situated in the top part of the screen next to I sign and displayed as lines. You can regulate the fluctuations of the induc-tor output with buttons , when simultaneously pressing button 3.Every user will have a different hand sensitivity to the device working on electrodes. Operation of electrodes can be disrupted („Severing the electrodes” information) if the electrodes touch dry or worn hand skin or a thicker epidermis. If so, you have to lightly wet your hands with water and increase the amplitude by an appropriate number of units. Do not use the electrodes on damaged skin.
4. BASIC PROGRAMS„Basic programs” chapter includes the list of frequencies of programs supplied by the producer.Programs are divided into groups.Programs stored in the internal device memory cannot be edited or deleted. If you work with such frequency programs, you select them and start - that’s it. In the group menu there is a line „Uruchom wszystko” and after the selection of this item all programs from the given group start one by one.After you enter the basic programs, „Complex No. 1” starts, where there are
23NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
3 BASIC PROGRAMS:– Program 1 – used before starting the therapy once before the whole session or every
time if your body has an intense reaction to the treatment.– Program 2 – detox– Program 3 – drainage.
5. PERSONAL PROGRAMSPrograms created with a special software can be stored in the internal memory of the device. They will be displayed in „Programy osobiste” menu.To save the frequencies moved from the computer software to the personal programs you have to remove microSD card.
6. PROGRAMS ON SD CARDThe device is compatible with microSD cards up to 2GB. After connecting the memory card via slot , „Programy na karcie SD” menu will display a list of programs of frequencies saved on the card. When saving session/program from Life Commander software on the device, sessions/programs are by default saved on microSD card. They are visible in the device as the last entry in „Programy na karcie SD”.
24 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
7. „SETTINGS” MENUSet up the device according to your own needs.SUBMENU „SETTINGS” EXPLANATIONS
Display Settings of contrast, brightness, and duration of display highlight.
Sound Settings of volume of sound signals and voice sugge-stions that can also be disabled.
Auto shutdown Setting time after which the device will be turned off if inactive
Time Settings of the internal clock.
Delete Personal Restore to factory settings.
Info Displaying serial number of the device, version of the software, and sub-assemblies
Back Up one level
RYS. 9 „Parameters” menu
25NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
RYS. 9 „Parameters” menu
III. GENERAL CONDITIONS
1. POWER SUPPLYThe device has an internal battery that has to be recharged every once in a while. If the vol-tage drops below the acceptable norm, the device will loudly inform about it and, if nothing is done, get disconnected.
If the battery charge reaches low level, the device won’t turn on. You have to connect the charger or, using USB cable, connect the device to a computer. You will see text on the screen and battery charging progress.
FORMATTING BATTERY: New battery is not full charged. The first three cycles of charging should take 16 hours each. The battery has to be used until the complete discharge. After the first three cycles of charging, you can charge the battery in any cycles.
2. MAINTENANCEWhen cleaning the external elements, you should not use solvents or abrasive materials.You have to disinfect the electrodes with products for manual disinfections of medical devices.Brass electrodes, if used frequently and disinfected, will oxidixe and darken. You can remove a
26 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
grey coating with product for metal. Remember about disinfecting the electordes after using
product for metal.
3. CLIMATIC CONDITIONS DURING OPERATIONRecommended air temperature is between +10 degree of Celsius and +30oC.
The highest air humidity in which the device can operate is 80% with +25oC.
Atmospheric pressure in which the device can operate is between 620 - 800mmHg (84-106.7 MPa).
27NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
IV. FREQUENTLY ASKED QUESTIONS1. Why is there a break during the program action and the device asks for resuming the
program?– The device has a built-in automatic check of conductivity. If at any time the
conductivity drops or the surface of the body becomes to dry, the program will be stopped.
a) you have to check if the cables are properly connected to the device and resume the program
b) you have to wet your hands lightly and resume the programc) you have to increase amplitude for electrodes and resume the program
2. How should I use the induction loop?– Induction loop affects the whole body regardless of its location but to intensify its
impact you can place it in an area affected by a disease or from where pain radiates. 3. What frequencies are in the available programs?
– We have used entire spectra of possibilities from scientific research of Rife, Clark, and other scientists.
4. Will the General Program work on everyone?– Every program includes a wide frequency spectrum which enables to defeat burden
28 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
at most people.
5. Does the Sweeper require foot electrodes?– In devices such as zapper, where electric current is used for treatment, electrodes are
necessary due to the increase of possibility of flow of current in the body. Using the Sweeper, you have access to two methods: electric current and electromagnetic induction thanks to which the frequencies penetrate through an entire body and current from hand electrodes can easily reach many areas.
6. What can be the reason for ineffective treatment?– If you have been using the device for a while and the results are no satisfactory, it
can be caused e.g. by maintaining wrong diet that is an essential elements during the Sweeper sessions or by improperly, independently selected programs. In such situation we advise you to visit a specialist/naturotherapist using Volla method or Vega test who will be able to conduct the electroacupuncture test and select the therapy adjusted to your individual needs.
7. How many procedures a day can I have using the Sweeper?– A number of procedures depends mostly on the wellbeing and vitality of the person
undergoing the treatment. It is necessary to use agents supporting body cleaning and removal of toxins
produced during the therapy. Regardless of a sense of well-being, one should not
29NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
exceed 4 programs for pathogens daily. We do not include here programs such as: detox, drainage, supporting organs, etc.
8. Can the therapy be used at children?– Yes. However, you should remember that children are more sensitive to bioresonance
and thus, a number of procedures should be decreased and conducted under specialist’s supervision.
9. In what order should I conduct health therapies?– Order should be established by a specialist or a therapist.
10. Can the device change our polarity?– Very long usage of the device can have a small influence on change of polarity at a
person. However, people with health problems usually start the treatment with their polarities changed by pathogens.
If you are still anxious, you can swap electrodes once in a while, e.g. put a red one in your left hand and a black one in your right hand and then return to the original settings.
11. Does the device work similarly to a zapper?– -Current-using part is based on the rules of operation of Hulda Clark’s zapper.
However, its mechanism is improved as it mostly uses a selective frequency range that does not harm a natural microflora.
30 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
If you have any remarks or other questions not inlcuded in the manual, please con-tact us:[email protected]
31NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
V. CONDITIONS OF THE FACTORY WARRANTY
1. FACTORY WARRANTY1. Company manufacturing the device guarantees that it meets the technical
requirements provided that the user mets the conditions of operation, transport, and storage.
2. The device comes with a warranty period of 24 months (as of the date of purchase).3. During the warranty period the manufacturer replaces the device with new or repairs
the damaged device provided the warranty card is presented.4. The warranty does not cover mechanical damage.5. The warranty does not cover power supply elements and external cabling.
WARRANTY CARD is enclosed with the booklet.
2. COMPLAINT INFORMATIONIn case of malfunction of the Device in the warranty period, you should describe the type of damage, add warranty card, and copy of the purchase receipt and send the device together with the assortment in a package well secured against damage (as filling material we suggest
32 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
bubble wrap, sponge, polystyrene, etc.) to the address of the service department by registered mail or courier.
Ship-to address:
Enso Electronics Sp. z o.o. (UK) Ltd. 299 Patriotow str., 04-767 Warsaw with adnotation: SERVICE DEPARTMENT
33NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
VI. LEGAL NOTICES
1. INTELLECTUAL PROPERTYSWEEPER Device distributed by Electronics sp. z o.o., designed and built based on the expe--rience and according to the recommendations of inventors and engineers of Enso Electro-nics sp. z o.o. Thus, it is strictly forbidden to copy, modify, improve, or use the program or use the current look of the device for individual or commercial manufacture or usage. The above prohibition does not apply to the non-commercial personal usage.
Trade name, SWEEPER devices, or other labels used in the manual, including Enso Electro-nics, or on the website www.ensoel.pl are the registered trademarks subject to the protection on principles provided for in the provisions of the Act of 30 June 2000 on Industrial Property Law (Journal of Laws No. 49 item 508, as amended). General rules of using the device are in the materials published on the website www.ensoel.pl. The ones in this manual are strictly of informative and educational nature. Using SWEEPER requires reading the instruction manual added to every device. Enso Electronics reserves the right to making changes and amending information included on the website or in this instruction manual, in any time and scope, without prior notice.
34 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
2. RESPONSIBILITYEnso Electronics is not responsible for the effects related to the usage of electronic SWEEPER device. By purchasing the above-mentioned device, the customer decides automatically on every possible consequences of its usage and assumes full responsibility. Only the personnel who read and understood this instruction manual can operate the device.
3. MARKING ACCORDING TO THE EUROPEAN DIRECTIVEInformation for users about the disposal of electrical and electronic equipment (for house-holds).
The device is marked in accordance with the Directive 2002/96/EC of the European Parlia-ment and Polish Act on Used Electric and Electronic Equipment With a Sign of a Crossed-out Waste Contai-ner. Symbol on the products or documents attached to them informs that you cannot dispose of malfunctioning electric and electronic equipment together with commu-nity waste.
Correct procedure in case of a need for utilization, re-use, or recycling of subassemblies con-sist in handing the device over to the specialized collection point where it will be accepted free of charge. In some countries you can give the product to the local distributor when pur-chasing another device.
35NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
Appropriate utilization of the device enables to preserve precious resources and avoid nega-tive impact on health and environment that can be endangered by inappropriate dealing with waste. You can obtain detailed information about the nearest collection point at local authorities.
Incorrect waste utilization is punished with penalties provided for in applicable local regula-tions. If you have to dispose of electric or electronic equipment, please contact the nearest sale point or a supplier as they will provide additional information.
4. ECO-FRIENDLY COMPANYAs a company interested in the environment and its protection, we received the Eco-Friendly Company Certificate. We participate in a program of eco-responsibiliy of companies.
5. RELIABLE COMPANYThe company has a certificate of reliability („Rzetelna Fir-ma”) obtained in a program run under the patronage of Polish National Debt Register.
36 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
ENSO ELECTRONICS SP. Z O.O. (UK) LTD.299 Patriotow str, 04-767 Warsaw+48 22 382 55 50 (51), +48 796 104 [email protected]; www.ensoel.pl
Service and production:299 Patriotow str., 04-767 Warsaw Opening hours: mon-fri 8:30 - 16:30 +48 22 201-94-50
6. DECLARATION OF CONFORMITYEnso Electronics hereby declares that SWEEPER is compliant with the require-ments of the Act of 13 April 2007 on electromagnetic compati-bility (Journal of Laws 07.82.556) and with the provisions of the Directive EMC 2004/108/ EC - you can find a copy of the Declaration of Confor-
37NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
mity at the website www.ensoel.pl.
DEK
LAR
AC
JA Z
GO
DN
OŚC
I N
R 0
6/20
14Ja
niż
ej p
odpi
sany
, rep
reze
ntuj
ący
prod
ucen
ta:
Firm
ę “E
NSO
Ele
ctro
nics
” sp
. z o
.o.
dekl
aruj
ę z
pełn
ą od
pow
iedz
ialn
ości
ą, ż
e w
yrób
:
SWEE
PER
jest
zgo
dny
z w
ymag
ania
mi U
staw
y z
dnia
13
kwie
tnia
200
7 ro
ku o
kom
paty
biln
ości
el
ektro
mag
nety
czne
j (D
z. U
. 07.
82.5
56) w
draż
ając
ego
post
anow
ieni
a dy
rekt
ywy
EMC
200
4/10
8/W
E.
Do
ocen
y zg
odno
ści z
asto
sow
ano
norm
y zh
arm
oniz
owan
e:
EN 5
5022
:199
8 +
A1:2
000
+ A2
:200
3EN
610
00-4
-2:2
009
EN 6
1000
-4-3
:200
6
Bada
nie
prze
prow
adzo
no w
labo
rato
rium
:
INST
YTU
T LO
GIS
TYKI
I M
AGAZ
YNO
WAN
IA W
PO
ZNAN
IUul
. Est
kow
skie
go 6
, 61-
755
Pozn
ań
Tel:
061
850
48 9
0, fa
x: 0
61 8
52 6
3 76
War
szaw
a 10
.10.
2014
....
......
......
......
...
Podp
is
EN
SO Ele
ctro
nics
ENS
O El
ectr
onics
EN
SO Electronics ENSO Electronics ENSO Electronics E NSO Electronics ENSO Electronics ENSO Electron-ul.
Oso
ws
ka 2
7/1
2 , 04-312 m. W
ars
za
wa, Polsksa -
tel. +
48 (0
) 22
382
55 5
0
tel. +
48 (0
) 22
382
55 5
1
AB 0
53
TABLE OF CONTENTSI. DESCRIPTION OF THE DEVICE
1. OVERVIEW ........................................................................................................................3
2. SPECIFICATION ................................................................................................................4
3. DEVICE STRUCTURE .........................................................................................................6
4. SYMBOLS THAT APPEAR ON THE DISPLAY ......................................................................8
5. CONTRAINDICATIONS .....................................................................................................9
6. PRECAUTIONS ................................................................................................................10
7. PREPARING FOR WORK .................................................................................................11
8. CONNECTING THE DEVICE ...........................................................................................12
40 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
II. WORK WITH THE DEVICE
1. TURNING ON AND OFF .................................................................................................13
2. WORKING WITH THE GENERATOR ................................................................................152.1 MANUAL MODE .............................................................................................................................152.2 COMBINATIONS OF FREQUENCIES .............................................................................................18
3. FREQUENCY PULSE ........................................................................................................203.1 BLOCKING / UNLOCKING / PAUSE ..............................................................................................203.2 REGULATING AMPLITUDE..............................................................................................................21
4. BASIC PROGRAMS .........................................................................................................22
5. PERSONAL PROGRAMS .................................................................................................23
6. PROGRAMS ON SD CARD .............................................................................................23
7. „SETTINGS” MENU .........................................................................................................24
41NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPER SWEEPER OPERATING MANUAL
III. GENERAL CONDITIONS
1. POWER SUPPLY ..............................................................................................................25
2. MAINTENANCE ..............................................................................................................25
3. CLIMATIC CONDITIONS DURING OPERATION ..............................................................26
IV. FREQUENTLY ASKED QUESTIONS ..............................................................27
V. CONDITIONS OF THE FACTORY WARRANTY
1. FACTORY WARRANTY.....................................................................................................31
2. COMPLAINT INFORMATION ..........................................................................................31
VI. LEGAL NOTICES
42 NOTE: According to Article 2 item 38 of the Act of 20 May 2010 on Medical Devices,SWEEPER is not a medical device.
SWEEPERSWEEPER OPERATING MANUAL
1. INTELLECTUAL PROPERTY ..............................................................................................33
2. RESPONSIBILITY .............................................................................................................34
3. MARKING ACCORDING TO THE EUROPEAN DIRECTIVE ....................................................34
4. ECO-FRIENDLY COMPANY .............................................................................................35
5. RELIABLE COMPANY ......................................................................................................35
Date of appli-cation
Date of repair Details of repair Employee signature
Device name: ..........................................................................Type/Model: ............................................................................Serial number:...........................................................................Bill/invoice number: ................................................................Date of sale: ............................................................................
Without the proof of purchase and seller’s stamp, name, type, model, serial number, and date of sale, the warranty card is INVALID! Detailed warranty conditions are specified above.
Seal and signature of the seller
Warranty Card