Download - SYNC 2100 Series Remote Terminal Units
OVERVIEWSYNC 2111 is a compact and rugged Remote Terminal Unit (RTU) which can be used for applications that control and monitor the distribution grid, involving distribution feeders, auto reclosers, sectionalizers, disconnection switches, ring main units, capacitor banks and distributed energy resources. SYNC 2111 has support for IEC 61850/DNP3.0/IEC104 communication and IEC 61131 Programming standards which makes the RTU smart-grid-ready with multiple communication interfaces and option for integrated cellular modem.
FEATURESGeneral• Enabled with smart grid protocols IEC 60870-101/104, DNP3.0,
Modbus, DLMS and IEC 61850• Advanced logic programming engine based on IEC61131-3• Remote Device Management from kalki.io • APIs for custom protocol and applications development#
• Automatic startup with restart notification following power restoration
• Time synchronization over NTP/SNTP/NMEA/IEEE1588/IEC 60870/DNP3.0
• Remote configuration and software update over the air• Local/remote switch for safe maintenance and operations• Multi master communication capability• Transparent/tunnelling support for remote device configuration• Built in Web HMI for monitoring and control*• Event and Alarm Storage• Event notification over SMS for operator assistance#
• SNMP Agent/ Manager for NMS Integration • Internal pluggable cellular modem options (GPRS/3G), designed
for (4G)**• External cellular, radio/ PSTN modem can be integrated
Hardwired I/O• 4 Card or 7 Card support per rack • 16 digital inputs for status indication• 16 digital outputs for remote commands• 8 unipolar analog inputs • 8 bipolar analog inputs • 4 Channel RTD input • Auto Calibration and Manual calibration support• LED indications for digital inputs and outputs• Optical isolation for digital inputs and outputs• I/O operation counter storage for asset maintenance
Security• Compliant with NERC-CIP v5*• Compliance with IEEE1686*• Role based access based on OCSP or IEC 62351-8*• Terminal access with two factor authentications*
• Inbuilt firewall*• IEC 62351-3 transport layer security (TLS)• IEC 62351-5/DNP3 secure authentication (DNP3-SA)• SSL based VPN with AES, DES or 3DES encryption over WAN/
LAN
APPLICATIONS• Distribution automation
– RMU automation – Sectionalizer automation – Auto-reclosure monitoring
• Asset monitoring – Power transformer – Distributed generation
MODELS• SYNC 2111-M2: Single Ethernet port RTU with 4 I/O card slots• SYNC 2111-M3: Single Ethernet port RTU with 7 I/O card slots • SYNC 2111-M4: Dual Ethernet port RTU with 4 I/O card slots• SYNC 2111-M5: Dual Ethernet port RTU with 7 I/O card slots
RELATED PRODUCTS• SYNC 4000: Control Center M2M Gateway• kalki.io - Energy IoT Platform
[email protected] | www.kalkitech.com © 2019 Kalkitech
SYNC 2100 SeriesRemote Terminal Units
Capacitor Banks
Distribution Network
DT Monitoring Equipment
Ring Main UnitsSectionalizers
Control Room
GPRS/CDMA Network
Router
SYNC 3000
SCADA / HMI
Public Network Provided by ISP
FEEDER RTU SPECIFICATIONSGeneral SYNC 2111-M2 SYNC 2111-M3 SYNC 2111-M4 SYNC 2111-M5
ManagementEasyConnect configuration utility/SNMP and SSH interface over secure networkFOTA support over GPRS/EDGE/CDMA/EVDO/UMTS/HSPADirect over debug port or console port
Web HMI for monitoring and control Not Available Available as optionSystem Protocols TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS, ARP, PPPoE, DDNSApplication Protocols IEC 60870-5-101/104, DNP3 serial/TCP, Modbus RTU/TCP, DLMS, IEC 61850 and many more.Additional Protocols Refer to full list of protocols at https://www.kalkitech.com/knowledge-center/protocols/LED Indications LAN ready, data transfer, serial port RX/TX, status, power, Alarm, IO card status
Security See row below NERC-CIP v5 compliant (Refer NERC-CIP compliance document for details)
SSHv2, SSL based VPN tunnel using Blowfish/AES/3DES IEC62351-3, -5
Logic Programming Basic logic engine with AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data delay operations and advanced logic based on IEC61131-3
Serial
Ports
1 x DB9 - RS232 (not available when internal modem is used)1 x DB9 - RS232/4852 x Terminal block - RS485
1 x RJ45- RS2321 x RJ45- RS232/RS485/Debug1 x Terminal block - RS485
Data Rate 110bps to 115.2kbpsEthernetPorts 1 x RJ45 2 x RJ45Physical Layer 10/100 Base-T auto sensing 10/100/1000 Base-T auto sensingIsolation 1500VAC min as per IEEE802.3/ANSI X3.263I/O InterfacesNumber of Slots 4 I/O card slots 7 I/O card slots 4 I/O card slots 7 I/O card slots
I/O Card options
Order Code: SYNC2111-16DI-A 16 Channel per IO card (24VDC)
Order Code: SYNC2111-16DO-A 16 Channel per IO card (500mA@24VDC)
Order Code: SYNC2111-8AI-A 8 Channel per IO card (0-10VDC, 0-5VDC,4-20mA, 0-20mA)
Order Code: SYNC2111-8AI-B
8 Channel per IO card (0-5mA, 0-1mA, 0-10mA, 0-20mA, 4-20mA, 0-1V, 0-2.50V, 0-5V, 1-5V, 0-10V, ± 1mA, ± 10mA, ± 20mA, ± 5V, ± 2.5V, 2/3/4 wire RTD)
Digital Input and Output Isolation 3kV optical
Digital Input Channel Configuration Single or Double indication, Debounce period (8 - 5000ms), Chatter suppression, Inversion, Intermediate suppression, Counter
Digital Output Channel Configuration Single or Double Command, SBO, Command mode (pulse/latch), Feedback point, CounterPower Requirements
Power SupplyOrder Code: PS-DC 19-58 VDC
Order Code: PS-ACDC 85-264 VAC 50-60Hz100-370 VDC
Consumption Details
Communication Card 5 WattInternal Modem 8 Watt peak16 DI Type A Card 1 Watt16 DO Type A Card 1 Watt8 AI Type A Card 1 Watt8 AI Type B Card 1 Watt
Plug-in Modem
Internal 3G Modem (GPRS/EDGE/CDMA/EVDO available on request) Not Available
External 3G/4G Modem, Radio modem, PSTN modem (external not part of RTU)Physical
Dimensions (H x W x D approx) 133mm x 270mm x 184mm 133mm x 482 mm x 184mm 133mm x 270mm x 184mm 133mm x 482 mm x
184mmMounting WallWeight without IO Cards 1600 grams 1900 grams 1600 grams 1900 gramsEnvironmentalOperating Temperature -10ºC to 70ºC (14ºF to 158ºF)Storage Temperature -20ºC to 80ºC (-4ºF to 176ºF)Relative Humidity 5% - 95% RH non condensing
# Available On request* Available in variants M4/M5 ** Available in variants M2/M3
Document: SYNC 2100 SeriesVersion: 5.08.042019
Corporate Headquarters: Bangalore, IndiaU.S. Headquarters: Campbell, CaliforniaSales Office: United Arab Emirates
© 2019 Kalkitech